|
| 1 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 2 | M&L for Brick work with Fly ash old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed.. |
| 3 | M&L for Brick work in half brick thick wall with Fly ash brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed. |
| 4 | Taking down cement plaster of any description on brick or stone masonry wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified. |
| 5 | M&L for 15 mm thick cement plaster with ready mix plaster (as per manufacturers instruction) on brick work and concrete surfaces finished even and smooth, (without using extra cement) including WPC complete all as specified and directed. |
| 6 | M&L for 10 mm thick cement plaster with ready mix plaster (as per manufacturers instruction) on brick work and concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed. |
| 7 | M&L for 5 mm thick rendering with ready mix plaster (as per manufacturers instruction) on ceiling, chajja, roof projection and facia surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 8 | M & L for preparation of new wall plastered surface and applying two coats of 100% Premium acrylic emulsion paint, having colour stay technology and VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over on putty applied surfaces of walls, primer & paint shall be applied by air less spray machine (Mechanical means) complete all as specified & directedNote:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures. |
| 9 | M&L for Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement based primer complete all as specified and as directed. |
| 10 | M & L for preparation of new wall plastered surfaceand applied two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over 1 mm thick cement based wall care puttycomplete all as per manufacturer\"s specification and directed. |
| 11 | M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 12 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\" /9\" to make free from dust, loose paint etc andapplying for preparation of new wall plastered surfaceand applied two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over 1 mm thick cement based wall care puttycomplete all as per manufacturer\"s specification and directed.. |
| 13 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\" /9\" to make free from dust, loose paint etc ans applying two coats of 100% Premium acrylic emulsion paint, having colour stay technology and VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over on including 1mm putty applied surfaces of walls, primer & paint shall be applied by air less spray machine (Mechanical means) complete all as specified & directed.Note:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures.The work for periodical services mentioned in item No. 8,10, 12 & 13 shall be executed by the contractor as per MoU by the authorized nominated applicator of OEM of the paint using wall sander machine for scrappying, applying cement based putty with automatic airless spray machine applying specified primer and paint with fully automatic spray paint machine. |
| 14 | M&L for Preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed. |
| 15 | M&L for Preparation of old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and as directed. |
| 16 | M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping holes and applying one coat of synthetic enamel paint(first Quality) complete all as specified and directed. |
| 17 | M&L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint(first Quality) (up to 25 mtrs height) complete all as specified and directed. |
| 18 | Dimolition of stone slab of any description / thickness in floors, aprons etc including cement mortar bedding laid bedded and pointed in any mortar, including removal of debries to a distance exc 1.5 km but n.exc 5 Km complete all as specified and directed. |
| 19 | M&L 16-18 mm thick machine cut Kota stone slab flooring with marble stone strips as per design approved, laid over and including cement screed bed 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed. |
| 20 | M&L for 16-18 mm thick machine cut Kota stone slab as in skirting / riser laid over and including cement rendering 10 mm thick in CM 1:3and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed. |
| 21 | M&L for 18 to 20 mm thick granite (of any type) tiles as in floor machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including screed bed 20 mm thick in cement mortor 1:6 complete all as specified and directed. |
| 22 | M&L for 18 to 20 mm thick granite (of any type) tiles machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including screed bed 10 mm thick in cement mortor 1:4 complete all as specified and directed. |
| 23 | M&L for chequered cement concrete tiles glazed finishof size 30 cm x 30 cm x 25 mm thick, with grey cement and pigment set & jointed with gray cement slurry and pointed with gray cement & pigment laid over and including 20 mm thick screed bed in CM 1:6 as in floors complete all as specified. |
| 24 | Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 25 | M&L for 75 mm thick plain cement concrete 1:4:8, type D- 2,using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 26 | M&L for plain cement concrete 1:2:4, type B-1,using 20 mm graded stone aggregate asin roof kerbs or mud stops or similar work rounded or chamfered on edges complete all as specified and as directed. |
| 27 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry and Pointed complete all as specified and directed. |
| 28 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry and Pointed complete all as specified and directed. |
| 29 | M&L for 60 mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade, in gray cement with approved design & pattern / shape laid as in foot path, / hard standing / drive ways or parking etc., made by table vibratory method using PU mould, laid over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks over the the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 30 | Fixing only of inter locking PCC paver block old paver block of any descreption, laid as in foot path / hard standing / drive ways or parking etc., laid over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks over the the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 31 | Dismantling of RCC posts,struts of any section including taking out embedded portionin concrete or brick masonry of any position place including swan neck fencingand making good to disturbed portion complete all as specified and directed. |
| 32 | M&L for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 33 | M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint(first Quality) over one coat of red oxide primer completeall as specified. |
| 34 | M&L for PCC 1:3:6,type C2, using 40 mm graded stoneaggregate, as in foundation, filling and mass concrete complete all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 36 | S&F Framedwork such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 290, Gde-E-165 complete all as specified and directed. |
| 37 | S&F rolled mild steel section as inmain and cross beams, hip and jack rafters; purlin where connected to common rafters and running rails and guides for for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed. |
| 38 | S&F Mild steel screw bolts (machine made) of 10mm dia of sank with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed. |
| 39 | Dismantling of roof sheet (any descriptions) including ridges in roof covering complete all as specified and directed. |
| 40 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated/plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 41 | Dismantling fencing wire mesh any type complete all as specified and directed. |
| 42 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed. |
| 43 | Supply only Chain link MS galvanisd fencing, any size or type, complete all as specified and directed. |
| 44 | Excavating in post holes (or similar holes) in soft/lose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. |
| 45 | Taking down Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs complete all as specified and directed. |
| 46 | S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Note :- Each line wire to be measured) |
| 47 | Temporarily blocking of inlet of septic tanks / manhole of depth0.50 to 1.5 metre with suitable wooden plugs / gunny bags and pumping / bailing out effluent and taking out / removing the accumulated sludge soil sewage / any other foreign / foul materials etc (solid / semisolid) from the septic tanks / manholes, complete and cleaning the septic tank / manholes with fresh water by mechanically / manually including taking out the blocking arrangements of inlet and making the system functional and disposal off out side of MoD land all as specified and directed. |
| 48 | Temporarily blocking of inlet of septic tanks / manhole of depth1.50 to 4.50 metre with suitable wooden plugs / gunny bags and pumping / bailing out effluent and taking out / removing the accumulated sludge soil sewage / any other foreign / foul materials etc (solid / semisolid) from the septic tanks / manholes, complete and cleaning the septic tank / manholes with fresh water by mechanically / manually including taking out the blocking arrangements of inlet and making the system functional and disposal off out side of MoD land all as specified and directed. |
| 49 | Temporarily blocking of 150 mm bore sewage line with suitable wooden plugs / gunny bags and cleaning the same by rodding and removing the sludge alongwith brick bats / stones / broken bottles / any other foreign materials etc complete and cleaning the sewage line with fresh water by mannually / mechanilly as directed by EIC, and taking out the blocking arrangements of inlet and making the system functional and disposal off out side of MoD land all as specified and directed. |
| 50 | Temporarily blocking of 200 mm bore sewage line with suitable wooden plugs / gunny bags and cleaning the same by rodding and removing the sludge alongwith brick bats / stones / broken bottles / any other foreign materials etc complete and cleaning the sewage line with fresh water by mannually / mechanilly as directed by EIC, and taking out the blocking arrangements of inlet and making the system functional and disposal off out side of MoD land all as specified and directed. |
| 51 | Demolition of existing roof treatment of any type, including screed bed etc complete all as specified and directed. |
| 52 | M&L for 15 mm thick rendering in cement mortar 1:3 over RCC roof slab including mixing only water proofing compound as per manufacturer instruction complete all as specified and directed.(WPC will be measured and paid separately) |
| 53 | Supply only water proofing compound of approved quality complete all as specified and directed. |
| 54 | M&L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under ;-(a) Applying a coat of fibre reinforced PU primer confirmeing to ASTM D412 @ 30% water dilution on prepaired surfaces and allow to dry.(b) Supply and applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10 Kg /10.76 Sqm total comsumption having below properties :-1. Elongation-500%-600%2. Solid contents -80%3. Tensile strenth - 1.6 N/mm24. Adhesion to concrete-2.2N/mm25. Initial hardness shore strenth-60Min.6. Tear strenth -14Mpa7. Total thickness of layer shall be 1.2-1.5mmNote ;- The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. |
| 55 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, complete all as specified and directed.etc., |
| 56 | S&F 110 mm outer dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls or including PVC clamp complete all as specified and as directed |
| 57 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries from site, complete all as specified and directed. |
| 58 | M&L for non skid ceramic coloured tiles 7-8 mm thick (square or rectangular) polished area of each tile exceeding 0.11 sqm but n.exc 0.16 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed in CM 1:6 complete all as specified and directed . |
| 59 | M&L for for coloured glazed ceramic tiles in vertical surfaces of size 350 x 250 x 7-8 mm/450 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed. |
| 60 | Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed. |
| 61 | S&F 15 mm bore tubes, \"medium grade\", galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and as directed. |
| 62 | Dismantling water tank capacity exc 250 & n.exc 500 ltr and taken as credit, complete all as specified and as directed. |
| 63 | Supply and fix 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc , complete all as specified and as directed. |
| 64 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, suitable for 20 mm bore pipe, screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 65 | Disconnecting existing tank of capacity 500 ltrs, setting aside or lowering if required and reconnecting or refixing in same positing or other position,including cleaningand removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc complete all as specified . |
| 66 | Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or bricks round, glazed with putty or fixed with bedds complete all as specified and directed. |
| 67 | S&F 3 mm thick sheet glass, ordinary quality and glzing with oil putty / timber bedds in square n. exc. 0.50 sqm in each pane complete all as specified and directed. |
| 68 | S&F 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane complete all as specified and directed.. |
| 69 | Taking down chowkats or frame, (wooden / aluminium / steel) not exceeding 1.5 sqm in each shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 70 | Taking down chowkats or frame, (wooden / aluminium / steel) exceeding 1.5 but n exc4 Sqm in each shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 71 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 72 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 73 | S&F aluminium anodised sections sliding windows shutters with frames comprisingSeries -C (20mm),2 track sliding shutters duly fitted with neoprenebeading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm) |
| 74 | S&F 100 mm size butt hinges medium weight cold rolled stainless steel complete all as specified and directed. |
| 75 | S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 76 | S&F 150 mmAluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 77 | S&F Aluminium anodised sliding door bolt 300m long,with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 78 | S&F in repairs 600 mm x 450 mm bevelled edge mirror 5.5 mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete. |
| 79 | S&F in repairs CP mild steel gratings suitable for 75 / 100 mm dia forNT/ FT complete all as specified and directed. |
| 80 | Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.. |
| 81 | S&F in repair PVC low level flushing cistern, valveless, syphonic action type, double push botton, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and makingconnection complete complete all as specified. |
| 82 | S&F in repair PVC connection 15 mm size with PTMT nut, length 450 mm complete all as specified and directed. |
| 83 | S&F in repair PVC connection 15 mm size with PTMT nut, length 600 mm complete all as specified and directed. |
| 84 | S&F in repair Aluminium anodised sliding door bolt 300m long,with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 85 | S&Fin repairgalvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed. |
| 86 | S&Fin repair 15 mm size pillar taps, cast copper alloy, chromium plated, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 87 | S&F in repairs 15 mm size Bib taps, cast iron with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 88 | S&F 12 mm thick toughened glass door with or without frosted and decorativeas directed of selected quality in single / double leaf door with and including all necessary fixing arrangement like SS clamp / clips, arrangements for fixing of floor spring, SS handle (2 Nos in each leaf), SS lock with locking arrangements etc, including making good the wall surfaces as per existing conditionsincluding taking down of existing unserviceable glass complete all as specified and directed. Note:- floor spring measured and paid separately. |
| 89 | Supply & fix in repair Double actionfloor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloysheet foundation box, main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed, complete all as specified and directed. |
| 90 | S&F in repairs Aluminium body (extruded section) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters 701 to 850 mm in width and ofweight between 36 to 60 Kg and fixed, complete all as specified and directed. |
| 91 | S&F in repair 100 mm size mild steel mortice lock,for aluminium door, with 4 brass levers and duplicate key complete all as specified and directed. |
| 92 | S&F false ceiling of E-board of size 600 x 600 x 4 mm thick,white prelaminated seif embossed reinforced designer ceiling board tiles of approved texture at all height including snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with galvanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) including dismantling of existing ceiling, complete all as specifieddirected. |
| 93 | M&L forSuper heavy series PVC Wall panelling consisting of 5-8 mm thick Plain / wood colour PVC sheet ofapproved coloured & pattern, fixed on walls as per manufacturesinstruction including dismantling of existing panelling complete all as specified & directed. |
| 94 | S&F in repair ABS plastic chromium plated Health faucet fixed with spring action and lever along with Flexible hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets,Complete all as specified and directed. |
| 95 | Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 580 x 450 mm fixed on and including new brackets complete, 32 mm size brass chromium plated waste coupling complete all as specified and directed. |
| 96 | S&F in repair 32 mm size flexible pipe of PVCfixed to WHB / urinals as waste pipe (not less than 600mm long) including PVC coupling complete all as specified and directed. |
| 97 | S&F in repair 15 mm size two way Angle cock / valve, cast copper alloy, chromium plated, fancy type with capstan head, with screwed down, screwed both end for iron pipes complete all as specified and directed. |
| 98 | S&F in repair 15 mm size two way stop cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. |
| 99 | Dismantling sign board of any shape, type, sections including taking out embedded portion in PCC / natural ground and making good complete all as specified and directed. |
| 100 | S&F for stainless steel post ornamental design 65mm nominal bore (Grade-304), minimum thickness 1.58mm (16 BS gauge), as in frame of sign boards fixed on groung/column/wall including bending, cutting, welding, jointing complete all as specified and directed. |
| 101 | S&F for stainless steel tube 40mm nominal bore (Grade-304), minimum thickness 1.58mm (16 BS gauge), as in frame of sign boards fixed on groung/column/wall or SS tube frame including bending, cutting, welding, jointing complete all as specified and directed. |
| 102 | S&F for stainless steel tube 25mm nominal bore (Grade-304), minimum thickness 1.58mm (16 BS gauge), as in frame of sign boards fixed on groung/column/wall or SS tube frame including bending, cutting, welding, jointing complete all as specified and directed. |
| 103 | Supply, installation, hoisting and fixing in position ACP (aluminium composite panels)board made up of ACP (aluminium composite panels ) sheet 3 mm thick of size, shape as required, colour as approved by GE, with cleat including necessary handling arrangement of stainless steel flat of suitable size all around, sealing with silicon joint sealantandcomplete all as specified and directed. |
| 104 | S&F High Intensity Prismatic retro-Reflective Sheeting of approved colour / shade fixed on aluminium sheet fully covered including lattered, writing information / logo with both side same sheeting by computerised cutting in white colour / shade. The letters approximately covering upto 60% area of the board complete all as specified and directed. |
