|
| 1 | Surface excavation not exc 30cm deep and averaging 18cm deep and getting out in any type of soil, complete all as specified and directed. |
| 2 | Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick in any type of soil, complete all as specified and directed. |
| 3 | Excavation in trenches in any type of soil, not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation, for shafts, manholes, pier holes, laying of cable/ pipe etc, not exc 10 Sqm on plan and not exc 1.50 mtr in depth and getting out inany type of soil, complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed. |
| 5 | Removing excavated material/ soil to a distance not exc 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point, complete all as specified and directed. |
| 6 | M&L for plain cement concrete 1:4:8 type D-2 (using 20mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed. |
| 7 | M&L for plain cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in foundations, foundations for fencing post, filling in and mass concrete, complete all as specified and directed. |
| 8 | M&L for plain cement concrete 1:2:4 type B-2 (using 20mm graded crushed stone aggregates) as in foundations, foundations for fencing post, filling in and mass concrete, complete all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains etc, complete all as specified and directed. |
| 10 | Extra for forming fair finished drain or channel 55cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc, complete all as specified and directed. |
| 11 | M&L for brick work with sub class ‘B’ bricks, old size, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed. |
| 12 | M&L for brick work with sub class ‘B’ bricks, old size, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and directed. |
| 13 | M&L for brick work with sub class \"B\" bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed. |
| 14 | M&L for 15mm thick rendering on fair faces brick work or concrete surfaces in CM 1:4 and finished the surface even and smooth without using extra cement including necessary scaffolding or Jhula if required at site, complete all as specified and directed. |
| 15 | M&L for 15mm thick rendering on brick work or concrete surfaces in CM 1:6 and finished the surface even and smooth without using extra cement including necessary scaffolding or Jhula, complete all as specified and directed. |
| 16 | M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 17 | Supply only integral water proofing compound. |
| 18 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 19 | M&L for applying two coats of cement based paint on newly plastered surfaces of walls over a coat of primer including preparation of surfaces, complete all as specified and directed. |
| 20 | M&L for preparation of new plastered surfaces of walls and applying two coats of white wash, complete all as specified and directed. |
| 21 | M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregates) as in slabs shelves roof, projectios, drops etc, complete all as specified and directed. |
| 22 | M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregates) as in chajjas, complete all as specified and directed. |
| 23 | M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregates) as in columns, beams, cantilevers, lintels over 1.50 mtr span, complete all as specified and directed. |
| 24 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in lintels upto 1.50 mtr clean span, cills, siesmic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chemfered angles and throating including necessary formwork, complete all as specified and directed. |
| 25 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia,complete all as specified and directed. |
| 26 | M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia,complete all as specified and directed. |
| 27 | Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 28 | Use and waste of formwork rough finished flat concrete surfaces of roofs, chhajjas, trough and similar works including edges, complete all as specified and directed. |
| 29 | Use of waste of form work to rough finished concrete surfaces, sides and soffits of floor or roof beams haunching, lintels, cantilever shelves including supported overhangs etc, complete all as specified and directed. |
| 30 | S&F box type steel window with side hung shutters including hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 31 | S&F box type steel window with side hung shutters including hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed. |
| 32 | M&L for mild steel framed work such as iron door, grills, gratings, wicket gates etc. with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, railing, frame work for water tanks and similar work, conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 33 | M&L for coloured glazed ceramic tiles of size 300mm x 450mm x 7-8mm thick as on vertical surfaces of walls such as as in dados, skirtings etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering on fair faces of brick /concrete surfacesin cement mortar 1:4 and fair to recive tiles, complete all as specified and directed. |
| 34 | M&L for non skid ceramic coloured tiles 7-8mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm each, superior premium quality, grade B-1 as per IS in Water splashing floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including screed bed or bedding layer of 15mm thk for laying floor finishes in CM 1:4, complete all as specified and directed. |
| 35 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing with rounding to edges as required, fixed over and including 15mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed. |
| 36 | Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness, complete all as specified and directed with the followings :-(a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture\"s specification.(b) Providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD / MULTIPLAS STANDARD consting of 100 micron HMDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed. |
| 37 | M&L for solar reflective bitumens aluminium paint @ 0.10 Kg per Sam over membrance surfaces as in roof treatment, complete all as specified and directed. |
| 38 | S&F FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100mm x 45mm with a wall thickness of 5mm (+/- 0.25mm), made out of extruded 5mm (+/- 0.25mm) thick PVC sheet manufactured by an ISO:9001-2008 certified company and by joining 3 Nos heat bent PVC sheet sections. The inside section of size 90x30mm shall be made from plain colour PVC sheet of 5mm (+/-0.25mm) thickness the inside section will be covered by sticking two sections of size 30mm x 35mm and 70mm x 45mm made from (+/-0.25) thick plain PVC sheet. The frame shall be mitre cut at two corners and joined with 4 Nos of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door frames are to be reinforced with 40mm x 20mm MS tubes of 19 guage through out the farme. The door frame shall be fixed to the wall using 8/100mm long screw through the frame by using anchor fastners. A minimum of 4 Nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc, complete as per manufacturer\"s specifications and directions of Engineer-in-Charge. |
| 39 | S&F 30mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of MS tubes of 19 guage thickness and size 20mm x 40mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20mm thick multi chamber hollow PVC section 1mm wall thickness bonded using solvent cement / cynoacrylate adhesive with 5mm (+/-0.25mm) thick plain/prelam PVC sheet manufactured by an ISO:9001-2008 certified company on both side of the inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton made by sticking 2 Nos PVC sheet of 5mm (+/- 0.25mm) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20mm thick (5mm x 4mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100mm x 25mm and 50mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25mm long steel screws etc, complete as per manufacturer\"s specification and drawing. |
| 40 | S&F alluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed, length of bolt 300mm, complete all as specified and directed. |
| 41 | S&F 100mm long stainless steel butt hinges, complete all as specified and directed. |
| 42 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 43 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 44 | S&F 4mm thick figured sheet glass, pin head type and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 45 | M&L for 50mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection, laid in alternate bays (not exc 2 Sqm each)and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection and filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 46 | M&L for salt glazed stoneware gully traps, size 150x150 square or round mouthed, type \"P\", complete all as specified and directed. |
| 47 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 (type B-1) smooth finished and reforming benching as required of pipe 150mm bore, complete all as specified and directed. |
| 48 | S&F 3 layer rotational moulded polyethylene water storage tank of any colour, 1000 ltrs capacity (cylindrical vertical with closed top) with 20mm dia ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank nipple inlet and outlet and conneting pipes, complete all as specified and directed. |
| 49 | M&L for 20mm bore GI water tubing, medium grade including all fixing acessoriesand laid in ceilings or laid in floors, complete all as specified and directed. |
| 50 | M&L for 15mm bore GI water tubing, medium grade including all fixing acessoriesand laid in ceilings or laid in floors, complete all as specified and directed. |
| 51 | M&L for 25mm bore GI water tubing, medium grade including all fixing acessoriesand laid in trenches, complete all as specified and directed. |
| 52 | S&F stop valve chromium plated, brass, fancy tap, screwed down high pressure with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed, complete all as specifiedand directed. |
| 53 | S&F stop valve chromium plated, brass, fancy tap, screwed down high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed, complete all as specifiedand directed. |
| 54 | S&F angle valve chromium plated, brass, fancy tap, screwed down high pressure with crutch handle, screwed both ends for 15mm bore iron pipe or for unions and fixed, complete all as specifiedand directed. |
| 55 | S&F bib tap, long body, chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 56 | S&F concealed stop valve chromium plated, brass, fancy tap, screwed down high pressure with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed, complete all as specifiedand directed. |
| 57 | S&F vitreous china wash down water closet pan, pedestal patern, white/coloured including CP EWC Jet with seat cover and connection, complete all as specified and directed. |
| 58 | S&F vitreous china water closet (squatt pan) orissa pattern of size 580mm x 440mm pan white with front or back inlet with integral foot rests including provn of cement concrete bedding including connections to flushing cistern/pipe, complete all as specified and directed. |
| 59 | S&F PVC low level flushing cistern of capacity 10 ltrs, white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipes, complete all as specified and directed. |
| 60 | S&F 6 inches x 6 inches ultra slim shower head with 12 inches arm of chromium plated brass for fixing to 15mm bore pipe with bend of 45 degree with wall flange,complete all as specified and directed. |
| 61 | S&F bevelled edge mirror of selected quality glass, size 600mm x 450mm, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with and including sheet glass shelf assembly consisting of 5.5mm thick glass sheet 12cm wide, 60cm long with chromium plated brackets, complete all as specified and directed. |
| 62 | S&F urinal valve auto closing system with built in control cock & wall flange valve of 15mm bore including urinal sperader of CP, complete all as specified and directed. |
| 63 | S&F vitreous china urinal half stall type, coloured excluding flushing cistern nut including flush pipe and waste pipe, complete all as specified and directed. |
| 64 | M&L for 16-18mm thick marble (Green) works, machine cut and machine polished, rounding and moulding as on jambs of doors, window cills and urinal partition, wash basin platforms, flooring, skirting, dados and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry, fixed over and including 15mm thick screed bed / rendering in CM 1:4, complete all as specified and directed. |
| 65 | S&F fancy type viteous china counter top, wash hand basin, \"OVAL\" shaped, white of size 550x400mm including CP bottle trap, inserted/ fixed in 18mm thick green marble stone slab platform by cutting in oval shaped, complete all as specified and directed.Note :- Green marble work shall be measured and paid separately under respective items of this BOQ. |
| 66 | Extra over for cutting and moulding of green marble in oval shaped to accommodate WHB of size 550mm x 400mm, complete all as specified and directed. |
| 67 | S&F brass chromium plated fancy type pillar cock, water fall down type, fixed to 15mm bore iron pipe, complete all as specified and directed. |
| 68 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls with stack clapms and fixed with nut and bolts, complete all as specified and directed. |
| 69 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls with stack clapms and fixed with nut and bolts, complete all as specified and directed. |
| 70 | S&F 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 71 | S&F 75mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 72 | S&F PVC (SWR) junction single or double equal or unequal, suitable for 75mm bore pipe, complete all as specified and directed. |
| 73 | S&F PVC (SWR) junction single or double equal or unequal, suitable for 110mm bore pipe, complete all as specified and directed. |
| 74 | S&F PVC (SWR) vent cowl, suitable for 75mm bore pipe, complete all as specified and directed. |
| 75 | S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement, suitable for 75mm bore pipe, complete all as specified and directed. |
| 76 | S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, 75mm dia of contilent, complete all as specified and directed. |
| 77 | S&F PVC (SWR) gully trap, 125/100mm size, setting and jointing with solvent cement, complete all as specified and directed. |
| 78 | S&F low density polyethene pipes (LDPE) of 32mm bore, pressure rating 6 Kg/cm2, fixed to walls with suitable means, complete all as specified and directed. |
| 79 | M&L for hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 80 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base etc, complete all as specified and directed. |
| 81 | M&L for machine pressed vibro mechanically floated interlocking cement paver block, lacquered finished, ISI marked, any shape and size, conforming to IS:15658-2006 of 60mm thickness, M-35 Grade with topping of cement mixed with pigment, complete all as specified and directed. |
| 82 | M&L for sand cushioning under paver blocks including watering and well ramming, complete all as specified and directed. |
| 83 | M&L for cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in kerbs or mud stops, rounded or chemfered on edges around paver blocks, complete all as specified and directed. |
| 84 | M&L for PCC Kerb stone outer coloured surface, machine pressed, factory made of size 150mm long x 100mm wide x 350mm deep in PCC 1:2:4 type B-0 (using 12.5mm grade stone crushed stone aggregates), jointed in CM 1:4, complete all as specified and directed. |
| 85 | Demolition and breaking up of drain pipe of 150mm to 300mm bore (Salt glazed ware, AC or reinforced concrete), set in cement mortar, complete all as specified and directed. |
| 86 | M&L for cement concrete 1:3:6 type C-2 (using 40mm grade stone crushed stone aggregates) bed to drain pipes of 150mm bore including packing under and hauching against the sides of pipes after they are laid and tested, complete all as specified and directed. |
| 87 | M&L for 150mm bore reinforced concrete pipes, class NP2, laid in trenches and jointed, complete with collars, complete all as specified and directed. |
| 88 | S&F 100mm bore cast iron soil, waste and vent pipe (spun type) in any length with or without ears with cement joint to slab including bolts and nuts and securing end of stays to wall or roof etc. including two coats of black synthetic enamel paint, complete all as specified and directed. |
| 89 | M&L for mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work, conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 90 | Supply only chain link fencing galvanised mild steel wires, thickness and aperature size as decided by Engr-in-Charge, complete all as specified and directed. |
| 91 | Fixing only chain link fencing including line wires wearing alternate mesh, any mesh, size and type to any type of standards, rails, straining bolts, welding etc. and including provission of binding wire as required, complete all as specified and directed. |
| 92 | S&F mild steel bolt, purpose made with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long and dia of neck exceeding 12 but not exceeding 20mm, complete all as specified and directed. |
| 93 | M&L for preparation of new or previously steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 94 | S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed. |
| 95 | S&F concertina coil fencing with punched tape concertina coil, 600mm dia 13 metre openable length having 53 Nos rounds per 6 metre length, single coil, fixed on wall with existing angle iron \"Y\" shaped with horizontal reinforced barbed wire, stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron, complete all as specified and directed.Note :- Barbed wire shall be measured and paid under respective item of this BOQ. |
| 96 | Demolition of cement concrete (un-reinforced) of any position i.e. floor and pavings etc. not exc 15cm thick (below or above ground level), complete all as specified and directed. |
| 97 | Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in cover slabs (for manholes etc), culvert on drain and similar articles with plain faces, set in cement mortar 1:6, complete all as specified and directed. |
| 98 | Removing any kind of debris/ demolised building material outside Def land including loading in truck and conveying day to day basis to beyond the lead included in the demolition rates and including loading, unloading and stacking at the destination approved dumping point etc. complete with all lifts and lead outside MoD Land and dumping to 10 KM distance, complete all as specified and directed. |
| 99 | M&L for mild steel angle iron/flat iron work as in drain cover including cutting tops to shape as directed, drilling holes, notching for wire etc. including all necessary drilling bolting or riveting etc and similar work, conforming to Fe-410-W Gde-E -250 Quality A), complete all as specified and directed. |
| 100 | M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing, conforming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed. |
| 101 | S&F 3mm thick solid double wall / multi wall polycarbonate sheeting (As per sample approved by GE) of wall affairs or it\"s equivalent approved colour, fixed to ground including angle, flat jointed/U jointed required at corners/ top of panel etc, fixed in curve or circular area with coach screws and washers / \"J\" hooks or \"L\" hooks as in roof, ground walls etc, complete all as specified and directed by Engr-in-Charge. |
| 102 | Demolition of cement concrete (un-reinforced) as in roofs of existing water proofing treatment of any type and any thickness, complete all as specified and directed. |
| 103 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregates) as in padding over RCC roof with using liquid water proofing compound, complete all as specified and directed. Note :- Rate of WPC shall be measured and paid separately under respective item of this BOQ. |
| 104 | Supply only liquid water proofing compound. |
| 105 | M&L for 15mm thick rendering in CM 1:3 on roof surfaces of any description and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 106 | M&L for preparation of surfaces by scrapping and properly cleaning the roof top surface and applying firtst coat fibre reinforced elastometric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibre with Sun reflective index (SRI) of 100-110 having minimum elongation of 350%, tensile strength of 2.9 MPa and shall have cracks bridging abylity upto 2.5mm and shall resist 10 Bars of hydroelastic pressure reduce surface temperature upto 10 degree celsius with 33% dilution of priming coat. Laying of fibre mesh of 0.3mm thickness weave in leno pattern having 45 Gsm/Sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply third and final coat undiluted @0.45 Itr/Sqm as specified and directed by Engineer-in- Charge. |
| 107 | M&L for point wring for one light/ ceiling fan point, controlled by one switch with 1.5 sqmm (nominal area PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 25mm dia medium duty ISI marked including sutiable new steel sunken boxes, modular frame and cover plate for fixing of modular switches as per required point, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting, chasing the surface and then making good as the same, complete all as specified and directed for the followings :-One light point / fan point controlled by one switch. |
| 108 | One exhaust point controlled by one switch. |
| 109 | One 3/5 pin socket outlet, 5 Amp independent. |
| 110 | M&L for point wring for power point controlled by one switch with 2.5 sqmm (nominal area PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 25mm dia medium duty ISI marked including sutiable new steel sunken boxes, modular frame and cover plate for fixing of modular switches as per required point, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 sqmm copper conductor cable FRLS connected to common earth dolly, complete all as specified and directed. |
| 111 | S&F modular switch, one module, 5/6 Amp, one way, 230 volts AC, complete all as specified and directed. |
| 112 | S&F modular socket 6 Amps, 5 pin, flush type, 240 volts with polycarbonate body, complete all as specified and directed. |
| 113 | S&F modular socket outlet, 5 Pin,6 and 15 Amps multi purpose, 2 in 1 flush type, 230 volts with polycarbonate body, complete all as specified and directed. |
| 114 | S&F modular switch single pole, one way, 16 Amps, 240 Volts with polycarbonate body, complete all as specified and directed. |
| 115 | S&F ceiling rose, 3 phase, PVC polycarbonate body, surface type, size 65mm x 50mm, insulated body, three terminal, complete all as specified and directed. |
| 116 | S&F LED Light fitting of 20 watt high quality material and design, extruded aluminium housing enhances safety with high quality PC diffusers reliable and robust housing structure, maximize the endurance over the life time slim integrated design, easy to install, Efficacy: 110 Im/W and also available in warm white and natural white complete making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling rose, complete all as specified and directed. |
| 117 | S&F LED light fitting 10 watt, trimline Neu is a robust and high performance batten. This LED luminaire comprises of extruded channel in thermally conductive material, high translucent serrated milky white diffuseris used to get glare free and smooth light distribution, Efficacy: 110 lm/W and available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting, complete all as specified and directed. |
| 118 | S&F MCB metalic distributition board 8 Way, double door, 230 Volts, concealed flush to wall for mounting MCBs, factory made, conforming to IS:13032, fabricated out of CRCA sheet fitted with DIN channel, neutral link and approriate rated bus bar. DBs shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature, between powder paint process to ensure smooth finish and protection against corsion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs. The DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways as specified. The DBs shall be of IP-43 protection, complete all as specified and directed. |
| 119 | S&F 35 Watt LED security light fitting with ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LED with secondary optics and IP-66 protection and with 0.60 mtr long 20/25mm dia (as per manufacturer standard) GI Pipe in 45 degree bend shape and necessary clamping devices as required at site, complete all as specified and directed. |
| 120 | Supply and laying or fixing or passing through existing/new duct/pipe, 1100 Volts grade heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and overall PVC sheathed of size 16 Sqmm 2 Core nominal cross section stranded conductor, complete all as specified and directed. |
| 121 | S&F MCB single pole and neutral, 240 Volts 32 Amps, breaking capacity 10 KA \"B\" Series etc, complete all as specified and directed. |
| 122 | S&F MCB single pole, 240 Volts 6-32 Amps, breaking capacity 10 KA \"B\" Series etc, complete all as specified and directed. |
| 123 | S&F exhaust fan steel body, AC single phase, 230 Volts of size 300mm sweep with blades and frame and louver including making suitable hole in wall of any type and making good disturbed surfaces to match with existing surfaces, complete all as specified and directed. |
| 124 | S&F 40mm dia High Density Polyethylene (HDPE) DWC pipes as telecom & power cable, ducting outer wall being corrugated impacts, excellent ring stiffness (compression strength), Inner Wall : smooth allowing easy insertion of cable, Colour : Orange, IS:16205 PART 24:2017, Compression strength : Compression strength at 5% applied of Deflection load ≥ 750 N, External influence : IP -67 ingress of dust - the joint is dustproof. ingress of water - the joint is waterproof, complete all as specified and directed. |
| 125 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
