|
| 1 | S&F galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs, 0.63 mm thick medium grade-\"O\" quality, with 120 grms/sqm zinc coating and Gde \"B\" (i.e 12.5 mm) corrugation including dismantling plain or corrugated steel sheeting, any gauge thickness including Nainital or similar pattern roof coverings , complete, all as specified and directed |
| 2 | S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade \"O\" with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coach screws and washers including dismantling old unserviceable plain or corrugated steel sheeting, any gauge thickness including Nainital or similar pattern roof coveringscomplete all as specified and as directed |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old unserviceable plain or corrugated steel sheeting, any gauge thickness including Nainital or similar pattern roof coveringscomplete all as specified and directed. |
| 4 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old unserviceable plain or corrugated steel sheeting, any gauge thickness including Nainital or similar pattern roof coveringsas complete all as specified and directed. |
| 5 | M&L for preparation of newsteel and iron surfaces of any descriptionover 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chromate primer, complete all as specified and directed. |
| 6 | M&L 2nd class soft wood (kail) as in scantling clean sawn, including dismantlingold unserviceable timber scantling 40 sqm and over in section in any position as in unframed/framed workcomplete, all as specified and directed. |
| 7 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling /wall including dismantling old unserviceable of wall and ceiling boards (fiber pulp, insulation, etc) or insulation boards/slabs, any thickness, including cover fillets complete, all as specified and directed. |
| 8 | S&F gypsum board 10mm thick as in ceiling ,fixed with screw as per manufactures instructions including GI frame work for gypsum board made out of GI sheet not less than 20 Gauge thickness in ceiling fixed with screws, frame suspended with 4mm dia GI wire as per manufactures instructions including dismantling old unserviceable of wall and ceiling boards (fiber pulp, insulation, etc.) or unsulation boards/slabs, any thickness, including cover fillets complete all as specified and directed. Note: Cost of removing & refixing of electric fittings & wiring shall be deemed included in quoted rate. |
| 9 | S&FsolidPVC wall lining consisting of 5mm thick plain colour PVC sheet 5mm thick PVC sheet fillet of width 20mm \"L\" & \"U\" for wall panelling inclusive of fixing on to wall to make PVC frameas per specifications and drawingincluding dismantling of old unserviceable wall and ceiling boards (fiber pulp, insulation, etc) or unsulation boards/slabs, any thickness, including cover fillets complete all as specified and directed.Note: Cost of removing & refixing of electric fittings & wiring shall be deemed included in quoted rate. |
| 10 | S&F 6mm thick non asbestos fibre cement designer board /pre Laminated self embossed texture designer board E-Board classic size 600x600 m ,HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI Frame work for Seamless ceiling size 600mmx600mm with main runner 38x24x0.9mm thick cross tee 8.6x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hanger 1200mm center to center both ways fixed with steel dash fasteners or from purlin from the roof with alignment dip including dismantling old unserviceable of wall and ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets complete as per manufacturer\"s instructionsand as directed by the Engineer -in- Charge.Note:Cost of removing & refixing of electric fittings & wiring shall be deemed included in quoted rate. |
| 11 | S&F in repairwooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc complete, all as specified and as directed. |
| 12 | S&F in repair 2nd classsoft wood plain clean sawn fillets square, rectangular or triangular in section exc 6 & n.exc 13 sqm secured with nails or brads complete all as specified and directed |
| 13 | S&F20mm thick boarding clean sawn as in eaves board fixed with nails includingdismantling old unserviceable wooden boarding, any description , fixed in any position with nails complete all as specified and as directed. |
| 14 | S&F 18/19 mm thick preliminated particle interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screwed to timber frame work as in shelves in kitchen, almirah, cup boards including dismantling of old unserviceable wooden boarding, any description, fixed in any position with nailscomplete all as specified and as directed by Engineer-in-Charge. |
| 15 | S&F in repair hasp and staple 100 mm safety type aluminium anodised, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F continuous (piano) hinges, 30mm width offlap, mild steel brightfinished or electroglavanised complete all as specified and directed. |
| 17 | Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 18 | M&L 25 mm thickplain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair all as specified and as directed. |
| 19 | M&L for non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6complete, all as specified and directed. |
| 20 | M&L for light shade vitrified colouredceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured to match the tiles over and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finish complete all as specified and directed. |
| 21 | M&L 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection laid in panels complete all as specified and directed by Engineer- in-Charge. |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete, all as specified and as directed |
| 24 | M&L for glazed ceramic coloured/printed tiles 450X 350 and 7mm thick as in vertical surfaces such as dado, skirting set jointed in neat cement slurry including pointed in white or coloured cement to match over and including 10 mm thick screed bed in cement mortar 1:4 complete, all as specified and directed. |
| 25 | Dismantling stone slabs and tiles of any description or thickness in floors/wall etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 26 | M&L for granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs, pillars ,window cills ,cooking platforms ,and the like in cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in CM 1:3 complete all as specified and directed. |
| 27 | S&F rotational moulded triple layer polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position including all accessories of capacity 1000 ltrs, including all fittings ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe of size 20 mm dia including taking out old unserviceable storage water tank all as specified and directed. |
| 28 | S&F rotational moulded triple layer polyethylene water storage tank 500 (cylindrical, vertical with closed top) hoisted and fixed in position including all accessories of capacity 500 ltrs, including fittingsball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe of size 15 mm diaincluding taking out old unserviceable storage water tank of capacity 500 Ltrs complete all as specified and directed. |
| 29 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe of size 15 mm dia all as specified and directed. |
| 30 | S&F ball in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe of size 20 mm dia all as specified and directed . |
| 31 | S&F GI tubes,medium grade galvanised, 15 mm borewith all fittings and fixed to walls and ceilings or laid in floorsincluding taking up or down old unserviceable steel tubing 15 mm diaand connections and stacking neatly for offering credit complete all as specified and directed. |
| 32 | S&F GI tubes,medium grade galvanised, 20 mm borewith all fittings and fixed to walls and ceilings or laid in floors including taking up or down old unserviceable steel tubing 20 mm diaand connections and stacking neatly for offering credit complete all as specified. |
| 33 | M&L for lagging to pipes of internal dia 15 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed \"SNAPON\" pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil including for removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for lagging to pipes of internal dia 20 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed \"SNAPON\" pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foilfor removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed by Engr-in-charge. |
| 35 | S&F in repair 15 mm bore dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15 mm dia and confirming to IS-781-1977, complete all as specified |
| 36 | S&F in repair 600 mm x 450 mm bevelled edge looking mirror with PVC frame of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 37 | M&L PBS roll 20 mtr long and 100 cm wide type-III weight 40 Kg per roll (As per sample) complete all as specified and directed. |
| 38 | Taking down chowkhats or frames with shutter (without taking off shutters from the frames) not exc 1.5 sqm each including cutting holes for taking out hold fasts or dismantling brick work/stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the govt) complete all as specified and directed by Engr-in-Charge |
| 39 | Taking down chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4 sqm each including cutting holes for taking out hold fasts or dismantling brick work/stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the govt) complete all as specified and directed by Engr-in-Charge |
| 40 | Taking down shutters of any description n.exc 1 sqm each, complete all as specified and as directed by Engr-in-Charge |
| 41 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each, complete all as specified and as directed by Engr-in-Charge |
| 42 | S&F 2nd class soft wood plain, solid chowkhats and frames wrought framed rebated on the solid,rounded or chamfered put together with glue, pinned at joints complete, all as specified and directed. |
| 43 | S&F factory made 35 mm thick 2nd class soft woodplain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers complete all as specified and directed. |
| 44 | S&F factory made 35 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a) complete all as specified anddirected . |
| 45 | S&F factory made 30 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (b) complete all as specified and directed . |
| 46 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and directed |
| 47 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing |
| 48 | S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm long complete, all as specified and as directed |
| 49 | S&Fbutt hinges, medium weight cold rolled, mild steel of size 75 mm complete, all as specified and as directed. |
| 50 | S&F150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified. |
| 51 | S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified. |
| 52 | S&F150 mm aluminium alloy handles, fabricated type, anodised complete all as specified. |
| 53 | S&F100 mm aluminium alloy handles, fabricated type, anodised complete all as specified |
| 54 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 55 | S&F mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed in repair complete all as specified. |
| 56 | S&F3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane including hacking out old borken glass (any thickness size, quality or description) form wooden frames complete, all as specified and directed. |
| 57 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete, all as specified and directed |
| 58 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete, all as specified and directed. |
| 59 | M&L for preparation of new wood and wood based surfaces of any description over 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 60 | M&L for rendering 15mm thick without on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cementincluding taking downcement plaster on brick or stone walls including raking out joints hacking for key scrubbing down with water etc., complete all as specified and directed . |
| 61 | M&L for rendering 10mm thick cement plaster on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement including taking downcement plaster on brick or stone walls including raking out joints hacking for key scrubbing down with water etc complete all as specified. |
| 62 | M&L preparationof new plastered surface and applying two coats of cement base paint of approved tint/ colour on wall including cornices, pilasters over a coat of primer complete all as specified directed by Engr-in-Charge. |
| 63 | M&L preparationof new plastered surface and applying two coats of distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed by Engr- in-Charge. |
| 64 | S&F in renewal curtain rod 20 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and directed by Engineer-in-Charge. Note:- The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account. |
| 65 | S&F PVC (SWR) 110mm bore single socketed in any length with rubber ring joints of as in rain water pipe including dismantling old unserviceable pipes of any description fixed to wall or laid under floor complete all as specified and directed. |
| 66 | S&F PVC (SWR) 75mm bore single socketed in any length with rubber ring joints of as inincluding dismantling pipes of any description fixed to wall or laid under floor complete all as specified and directed. |
| 67 | S&F PVC SWR branch piece single equal or unequal 110mm bore complete all as specified and directed. |
| 68 | S&F PVC SWR branch piece single equal or unequal 75mm bore complete all as specified and directed. |
| 69 | S&F PVC(SWR) bends any radius 110mm bore complete all as specified and directed. |
| 70 | S&F PVC(SWR) bends any radius 75mm bore complete all as specified and directed. |
| 71 | S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm complete all as specified. |
| 72 | S&F in repair vitreous china wash down water closet whiteOrissa pattern of size 550mm x440mm including integral foot rest excluding flushing cistern and flush pipe)including P or S trap complete allas specified and directed. |
| 73 | S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excludingflushing cistern and flush pipe)complete all as specified and directed. |
| 74 | S&F in repair wash hand basin vitreous china size 550nn x 400mm white flat backincluding CP pillar tap heavy dutyas approved by GE, waste, chain plug, PVC connection, PVC waste pipe complete all as specified and directed. |
| 75 | S&F in repair CP mixer single lever basin mixer fancy type for WHB / Sink with double action for Hot/Cold water complete all as specified and directed. |
| 76 | S&F PVC connection of PTMT nuts 15mm size and 600mm long fixed in repair complete all as specified and directed. |
| 77 | PVC connection of PTMT nuts 15mm size and 600mm long fixed in repair complete all as specified and directed. |
| 78 | S&F in repairs PVC valveless, syphonic action type flushing cisterns low level white with inlet ball valve float and handle including brackets 10 ltrs capacity including flushing pipe and connections to pipes and fixing of down or pull or lower if any complete all as specified and directed. |
| 79 | Taking down aluminium windows including frame if required and repair the same including repair of rubber bidding, aluminum clips, adjustment of glasses, repair of floor spring or hydraulic door closer with oiling or greasing etc. adjustment of horizontal, vertical or middle style complete all as till the satisfaction of Engr-in-Charge. |
| 80 | S&F waste pipe 32mm bore for WHB with coupling fixed in repairs complete all as specified and directed. |
| 81 | S&F waste pipe 40 mm bore for SINK with coupling fixed in repairs complete all as specified and directed. |
| 82 | Dismantling wrought iron or mild steel work of any description not other wise specifically provided, complete all as specified and directed. |
| 83 | S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0, complete all as specified and directed. |
| 84 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc andhoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirtetc from tanks and from mouths of circulating pipes etc complete (capacity of tanksexc 250 ltr and n exc 500 ltrs) including writing \" date of cleaning \" and next due date in bold capital letters exc 4 cm in height all as directed by Engr-in-Charge. |
| 85 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc andhoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirtetc from tanks and from mouths of circulating pipes etc complete (capacity of tanksexc500 ltr and n exc 1000 ltrs) including writing \" date of cleaning \" and next due date in bold capital letters exc 4 cm in height all as directed by Engr-in-Charge. |
| 86 | S&F in repair PVC lid for water storage tank of capacity 500 Ltrs of approved make complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F in repair PVC lid for water storage tank of capacity 1000 Ltrs of approved make complete all as specified and directed by Engineer-in-Charge. |
| 88 | M&L for brick work with sub class \"B\" bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6 including demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge. |
| 89 | M&L 75mm thick PCC 1:4:8type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 90 | M&L for prepolished chequered cement concrete tiles of size 300x300 and 25mm thick, made using vibratory mechanical system having glazed top layer and set, jointed and pointed in neat cement slurry with white cement and pigment as in treads / floor etc. over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed by Engineer-in-Charge. |
| 91 | M&L for cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in cills, steps, seismic and other similar bands, plinth courses, copings, kneelers, apex stones, bed plates, bond stones etc. including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F aluminium door air tight anodized frame made of size 100mm x 45mm of sheet thickness 1.5mm with one or more rebate including jointing cleats hinges etc for fixing anodized aluminium door shutter fully panelled) two Nos of panel on each shutter) with 5.5 mm thick tinted plain glass shutter rail made of 80mmx45mm of sheet thickness 1.5mm (top, bottom, middle and side rail) single/double leaf side hung type including necessary joints cleats, anodized aluminium fitting/aluminium fitting such as aluminium butt hinges 100mm long 4 Nos on each shutter, aluminium anodized tower bolt 200mm long 3 Nos for each door, aluminium anodized handle 150 mm 2 Nos ‘D’ type for each shutter & locking 6 lever of make Harrison one on each door, bottom door spring one on each shutter including hydraulic door closer all door fitting except cleat shall be Ist marked (size of each door shall be as per site requirement), complete all as specified and directed. |
| 93 | S&F aluminium window openable/fix type with aluminium anodized frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminium section of size 47.62 x 44.45 x 1.5 mm thick including jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminium strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5.5 mm thick tinted glass with rubber packing complete all as specified and directed. Make: Jindal/Indal/Hindalco. |
| 94 | S&F 4.5 mm thick tinted glass fixed with necessary rubber gasketand aluminium beading weight not less than 100gm per RM with aluminium frame complete all as specified and directed. |
| 95 | S&F vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinalback in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified & directed. |
| 96 | S&F brass 2 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 97 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 98 | M&L light shade vitrified ceramictiles 10 mmthick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in skirting /dado etc. set and jointed inneat cement slurry and pointed incement to match white or colouredand over and including 10mm thick bedding layers in cement mortar 1:3 complete all as specified and directed. |
| 99 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 100 | M&L for rendering 15mm thick, in cement mortar 1:3 on concrete/ brick surface of sunken portion, mixed with Dr Fixit pidiproof LW+ or equivalent @ 200ml/50Kg of cement and fixed with 32mm GI pipe 450mm long sport complete all as specified anddirected. |
| 101 | M&L for applying 2 coats of flexible polymer acrylic water proofing coating, 1mm thick (dry film in two coats) using Dr Fixit pidifin 2K of M/S Pidilite Industries or equivalent including necessary pond testing for 48 hrs in sunken portioncomplete all as specified anddirected. |
| 102 | M&L fortreatment to sunken slab by applying primer @ 0.5 Kg/Sqm over the prepared surface and hot blown cutback bitumen @ 0.70 Kg/Sqm providing and laying3mm APP membrane on min 15cm over lapand screed bed25mm thick, in cement mortar 1:3 on above sunken portion, mixed with Dr Fixit pidiproof LW+ or equivalent @ 200ml/50Kg of cementcomplete all as specified anddirected. |
| 103 | M&L for plain cement concrete 1:5:10, type E2 (using 40mm graded stone aggregate) in sunken floor surface finished fair and complete all as specified and directed. |
| 104 | M&L for 25mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in sub base offloor of wc/bath/toilet finished even and smooth without using extra cement mixed with water proofing compound Dr Fixit pidiproof LW+ or equivalent at 200ml/50kg of cementall as specified and directed. |
| 105 | M&L non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15mm thick screed bedin cement mortar 1:4, complete all as specified and directed. |
| 106 | M&L glazed ceramic colour tiles in vertical surface 350x 250/ 450X350 and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick bedding layers in cement mortar 1:3 complete all as specified and directed. |
| 107 | M&L for light shade vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured to match the tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finish complete all as specified and directed. |
| 108 | M&L light shade vitrified ceramic tiles 10 mmthick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed inneat cement slurry and pointed incement to match white or colouredover and including 10mm thick bedding layers in cement mortar 1:3 complete all as specified and directed. |
| 109 | M&L 75 mm thick PCC 1:3:6 type C2(using 40 mm graded stone aggregate)as on foot path complete all as specified and directed. |
| 110 | M&L 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring finished even and smooth with out using extra cement complete all as specified and directed. |
| 111 | M&L 75 mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete as specified and directed. |
| 112 | M&Lmachine cut Kota stone slab flooring 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bedin cement mortar 1:4, complete all as specified and directed. |
| 113 | M&Lmachine cut Kota stone slab flooring 20 - 25 mm thick in riser of steps, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing over and including 10mm thick bedding layers in cement mortar 1:3 complete all as specified and directed. |
| 114 | M&L for granite (of any type) work ,20 mm thick as, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 115 | Dismantling wooden boarding, any description , fixed in any position with nails complete all as specified and directed. |
| 116 | S&F20mm thick boarding clean sawn as in eaves board fixed with nails complete all as specified and directed. |
| 117 | S&F 15 mm thick 2nd class soft wood clean sawn boards or planks, width n.exc. 25cm as in wall boarding complete all as specified and directed. |
| 118 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in wall complete all as specified and directed. |
| 119 | M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with nails to timber frame work complete all as specified and directed. |
| 120 | Dismantling timber scantling 40 sqm and over in section in any position as in unframed/framed work complete, all as specified and directed. |
| 121 | M&L 2nd class soft wood (kail) as in scantling clean sawn, complete, all as specified and directed. |
| 122 | Dismantling of wall and ceiling boards (fiber pulp, insulation, etc..) or insulation boards/slabs, any thickness, including cover fillets complete, all as specified and directed. |
| 123 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling complete all as specified and directed. |
| 124 | S&F aluminium anodised snap grid ceiling of frame size 600x600mm,main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including Gypsum Board 12mm thick in ceiling fixedwith screw as per manufacturers instructions complete all as specified and directed. |
| 125 | S&F aluminium anodised snap grid ceiling of frame size 600x600mm,main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer\"s instructionsand directed by the Engineer -in- Charge. |
| 126 | Dismantling plain or corrugated steel sheeting, any gauge thickness including Nainital or similar pattern roof coverings complete, all as specified and directed. |
| 127 | S&F galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs, 0.63 mm thick m Gde-o quality, with 120 grms/sqm zinc coating and Gde \"B\" (i.e 12.5 mm) corrugation, complete, all as specified and directed. |
| 128 | S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade \"O\" with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coach screws and washers complete all as specified and directed |
| 129 | S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 130 | S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 131 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 132 | Taking downcement plaster on brick or stone walls including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 133 | M&L 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out using extra cement complete all as specified and directed. |
| 134 | M&L for rendering 10mm thick cement plaster on fair faces of brick or concrete surfaces in cement mortar 1:4, even and smooth without using extra cement complete all as specified and directed. |
| 135 | S&F aluminium window openable/fix type with aluminium anodized frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminium section of size 47.62 x 44.45 x 1.5 mm thick including jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminium strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5.5 mm thick tinted glass with rubber packing complete all as specified ad as directed. Make: Jindal/Indal/Hindalco. |
| 136 | Taking up or down steel tubing 15 mm diaand connections and stacking neatly for offering credit complete all as specified and directed. |
| 137 | S&F tubes,medium grade galvanised, 15 mm borewith all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 138 | Taking up or down steel tubing 20 mm diaand connections and stacking neatly for offering credit complete all as specified and directed. |
| 139 | S&F tubes, medium grade galvanised, 20 mm borewith all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 140 | M&L for removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed by Engr-in-Charge. |
| 141 | S&F in repair, plate rack of overall size 24 x 24 x 10 Inchmade out of 0.63mm thick stainless steel sheet complete all as specified and directed.Make-Prayag Cat No P-310 or techno-commercially equivalent in approved makes. |
| 142 | S&F in repair Corner glass shelf 300mm complete all as specified and directed. Make-Prayag Cat No- BEA-44 or techno-commercially equivalent in approved makes. |
| 143 | S&F in repair glass shelf 500x60mm (with ABS Brackets) complete all as specified and directed. Make-Prayag Cat No- BEA-47 or techno-commercially equivalent in approved makes. |
| 144 | S&F in repair wall mixture / sink mixture complete all as specified and directed. |
| 145 | S&F in repairsbrass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 146 | S&F in repairs CP brass shower rose with swival joints complete fancy type for 15mm bore pipe, fixed as in repairs, complete all as specified and directed. |
| 147 | S&F in repair 15 mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15 mm dia and confirming to IS-781-1977 complete all as specified and directed. |
| 148 | S&F in repairs 15 mm bore, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions as specified. |
| 149 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot or Cold\" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed. |
| 150 | S&F in repairs Jet spray (butterfly) with 1Mtr tube complete all as specified and directed.Make- Prayag Cat No-BEA-17 or techno-commercially equivalent in approved makes. |
| 151 | S&F in repair body cleaner Health faucet with 1Mtr tube and hook (Baded tube) white/Ivory complete all as specified and directed. Make- Prayag Cat No- 187 or techno-commercially equivalent in approved makes. |
