|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. (a) In cement mortar |
| 2 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : (a) In cement mortar |
| 3 | Removing the collapsed portion of RR retaining wall, earth, debris etc. from the private property at the rear side and stacking all serviceable materials like stores, brick etc. and disposing the unserviceable materials as per the direction of Engineer-in-charge |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (a)All kinds of soil. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for : (a) Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : (a)Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 9 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : (a)Cement mortar 1:6 (1 cement : 6 coarse sand).With available stones |
| 10 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : (a) Flush/ Ruled pointing |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (a) Cement mortar 1:6 (1 cement : 6 coarse sand) - With available bricks |
| 12 | Solid block masonry with precast machine moulded cement concrete solid block of size 300x200x150mm having minimum compressive strength of 35kg/sqcm and density not less than 1800kg/cum in cement concrete 1:5:10 ( 1 cement: 5 crused stone sand: 10 graded stone aggregate 12mm nominal size) with cement mortar 1:6 (1 cement:6 coarse sand) including scaffolding, racking out joints and filling joints with cement mortar, finishing neatly etc. upto plinth level.all complete as per the direction of Engineer-in-charge |
| 13 | 12 mm cement plaster of mix : (a) 1:6 (1 cement: 6 fine sand) |
| 14 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. (a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (a) One or more coats on old work. |
| 16 | Providing and fixing weep holes using 50mm outer dia PVC pipes of 4kg/Sqcm cut to required length and placed inside RR masony as per the direction of Engineer-in-charge |
