|
| 1 | Dismantling offloor, hearth or wall tilinng incl cement mortar bedding (but not backing) and rubbish offincluding rubbish off outside of MOD land complete all as specified and as directed. |
| 2 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors,skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 3 | M&L for glazed ceramic coloured tiles in verticle surfaces of approved pattern of size 6000x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including10mm thick plaster in C:M 1:4as a backing coat complete all as specified and as directed. |
| 4 | Demolition ofstone slab/tilesof any description or thickness laid, bedded and pointed in cement mortar/in floor, skirting, hard standingg, Apron etcincl rubbish off outside of MD land complete all as specified and as directed. |
| 5 | Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed |
| 6 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed |
| 7 | Fixing only tubes,any grade , to walls and ceilings or laying in floors 15 mm dia complete all as specified and directed Note : Serviceable GI pipe obtained from item No.5 above shall be re-used under this item |
| 8 | Fixing only tubes,any grade , to walls and ceilings or laying in floors 20 mm dia complete all as specified and directed Note : Serviceable GI pipe obtained from item No.6 above shall be re-used under this item |
| 9 | S&F15mm bore GI water tubing medium grade fixed complete to wall or ceiling as specified & directed. |
| 10 | S&F 20 mm bore GI water tubing medium grade fixed complete to wall or ceiling as specified & directed. |
| 11 | S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 12 | Taking down cementplaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed |
| 13 | M&L for rendering 15mm thick cement plaster 1:4 on concrete surfaces of finished with sponge finish complete all as specified and directed |
| 14 | M&L for Preparing new plastered wallssurfaces & Finishing with Acrylic Smooth exterior paint of required shade of premium 1st quality : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete all as specifiedand directed. |
| 15 | M &L Dubbing out average 10mm thick on irregular face of walls in CM 1:4 complete all as specified and directed |
| 16 | M&L for 10mm thick cement plaster in CM 1:6 on brick surface finished even and smooth without using extra cement on ceilling . complete all as specified and directed |
| 17 | M&L for Preparing newly plastered surfaces and applying two coats of oil bound distemper thin layer of wall care putty on walls complete all as specified and directed |
| 18 | Complete removal off existingtreatment, M&L for applying thin layer of 2mm thick wall care putty andapplying two coatsof oil bound distemper on walls all asspecified and directed. |
| 19 | M&L for applying thin layer of 2mm thick wall care putty on ceilling andapplying two coatsof oil bound distemper on ceilling all asspecified and directed. |
| 20 | S&F1.00 mm thick stainless steel plate rack, overall size not less than 775mm x 900mm x 250 mm deep, fixed to wall with rawl plug and suitable size stainless steel screws complete all as specified and directed |
| 21 | S & F in repairs stainless steel sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortor on granite/cudappa slab or including fixing cantilever brackets,including fixing waste coupling and connecting union to pipe overall size 915 mmx 460 mm bowl size 410 mm X 330mm X 160 mm complete all as specified and as directed. |
| 22 | S & F in repairs stainless steel sink without drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortoron granite/cudappa slab or including fixing cantilever brackets,including fixing waste couplingand connecting union to pipe overall size 915 mmx 460 mm bowl size 410 mm X 330mm X 160 mm complete all as specified and as directed. |
| 23 | S&F in repair 15mm dia bib tap of cast copper alloys chromium plated fancy type with fancy handle with wall flange screwed down screwed for iron pipe or for brass ferrulecomplete all as specified and directed. Make : Jaquar cat No. CON- 047KN or equivalent make as mentioned at list of makes in PS |
| 24 | Supply and fixPVC flexible pipe (waste pipe), suitable for 32 mm bore waste coupling of sink/ wash hand basincomplete all as specified and as directed |
| 25 | S&F in repairsPVC (SWR) floor trap with steel grating 75 mm dia including jointing to waste pipe including removing old traps complete all as specified and directed |
| 26 | Demolition and breaking of drain pipes AC/CI/PVC set in cement mortar or adhensive complete all as specified and directed |
| 27 | S&F for 75 mm diaSWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specified and directed |
| 28 | S&F for 100 mm diaSWR pipes single socketed in any length with rubber ring joints fixed to floor including clamp etc complete all as specified and directed |
| 29 | S&F PVC (SWR) single T 75 mm dia access door complete all as specified and directed |
| 30 | S&F PVC (SWR) bend 75 mm dia complete all as specified and directed |
| 31 | M&L 18-20 mm thick granite (of any type) work table rubbed and pre polished as in cooking platforms ,window cill,steps,wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite incl 15 mm thick screed bed in CM (1:6) complete and ensure best adhesion to surface complete all as specified and directed. |
| 32 | M & LMachine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed and screed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 33 | Rounding to edges of stone slabs one / two edges, such as in steps, cooking platform, and other similar situations complete all as specified and directed |
| 34 | Taking down chowkhat or frames with shutters (withouttaking off shutter from the frame) n. exc 1.5 Sqm each complete all as specified and directed |
| 35 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.0 Sqm and not. exc. 2.0 Sqm. each complete all as specified and directed |
| 36 | Taking down Shutters of any description exc 1 sq. m but n. exc 2 sq m each complete all as specified and directed |
| 37 | S&F 30 mm thick glazed and skeleton shutter open rebated and prepared to receive glass, IInd class hardwood gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitred stile as per beads for securing glass etc, The size of therail and site as per IS 1003 (part -I), Kiln seasoned and chemically presure treated as specified and directed |
| 38 | M & Lfor 2 nd class hardwoodPlain, solid, straightchowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints,suppliedandfixed complete all as specified and directed |
| 39 | S&F 35 mm thick2nd class hardwood plain framed panelled shutters( ornamental and intricate design ) any number member of panels) with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated all as specified and as directed. |
| 40 | S&F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed |
| 41 | S&F powder coated window and ventilator shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/M etc complete all as specified and directed Note:- Glass pane/ wire mesh shall be measured and paid seperately |
| 42 | S&F 4mm thick sheet glass ordinary quality andglazing fixed to aluminium window / ventilator shutters / steel windows etc all as specified and directed |
| 43 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.including fillet complete all as specified and directed |
| 44 | M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed . |
| 45 | M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 46 | S&F 100mm,Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, complete all as specified and directed |
| 47 | S&F 150 mm Brass handles, cast type, polished brighthandles ,fabricated type complete all as specified and directed |
| 48 | S & F Brass barrel tower bolts, with cast or sheet barreland rolled or cast bolts and fixed 150mm long complete all as specified and directed |
| 49 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixedof 250mm long complete all as specified and directed |
| 50 | S&F aluminium anodiseddoor handle 150 mm size complete all as specifiedand directed. |
| 51 | S&F 150mm long aluminium anodised, barrel tower bolt of exteuded section and fixed complete all as specifiedand directed. |
| 52 | S&F aluminium anodised sliding door bolt 300mm long with hasp, staple(bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate typewith bright bolt not less than 12mm dia complete all as specifiedand directed. |
| 53 | S &F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed |
| 54 | S&F25 mm bore stainless steel coated curtain rod complete all as specified and directed |
| 55 | S&F stainless steel coatedfancy type bracket suitable for 25 mm bore curtain rod complete all as specified and as directed |
| 56 | S&F in repair two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed. |
| 57 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 58 | S&F Framed work Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165fixing complete all as specified and directed |
| 59 | M&Lfor preparation new paintedsteel surface of any description over 10 cm width or girth not other wise described and appying two coat of syntheticenamel paint over a coat of primer complete all as directed. |
| 60 | S&F first class hard wood weather boarding clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps complete all as directed. |
| 61 | Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facingsdressed stone work and precast PCC Block,including rubbish off outside of MOD land complete all as specified and directed.Note:- Steel props100 mm dia are provided to support existing slab whlie demolition of stone work till complete the work |
| 62 | M&L for precast cement concrete block masonry with solid blocks type C1 (1:3:6) (Using 20mm size graded stone aggregate), exc 10 cm in width in set in cement mortar CM 1:6 complete all as specifiedand directed. |
| 63 | M&L for PCC (1:2:4) type B-0 (Using 12.5 mm graded stone aggregate)in coping including weathering slightly rounded and chamferred angleincluding necessary form workand finish of exposed surfaces of concrete as described in SSR Part-II complete all as specified and directed |
| 64 | Demolition of Cement concrete in ground floor on paving n.exc 15 cm thickness (below or above ground level) incl rubbish off outside of MD land complete all as specified and as directed. |
| 65 | M&L for PCC (1:4:8) type D-2 (Using 40mm graded stone aggregate ) for sub base 50 mm thick complete all as specified and as directed. |
| 66 | M&L for 75 mm thick PCC (1:3:6) type C2 (Using 40 mm graded stone aggregate) as in plinth protection/ path /hardstanding etc finished even and smooth without using extra cement complete all as specified and directed . |
| 67 | S&F perforated cutlery basket of (Appx size)600x400x100mm (+ or - 10 % variation as per site requirement) fabricated with purpose made stainless steel of grade 304, weight as per site requirement per each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws,complete all as specified and as directed. |
| 68 | S&F stainless steel cup and saucer rack(Appx size) 600x400x100mm (+ or - 10 % variation as per site requirement)fabricated with purpose made stainless steel of grade 304,weight as per site requirement per each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws complete all as specified and as directed. |
| 69 | S&F perforatedthalirack of size(Appx size)600x400x100mm (+ or - 10 % variation as per site requirement)fabricated with purpose made stainless steel of grade 304,weight as per site requirement per each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws complete all as specified and as directed. |
| 70 | S&F plain basket (Appx size)600x400x100mm (+ or - 10 % variation as per site requirement)fabricated with purpose made stainless steel of grade 304,weight as per site requirement per each rack , using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws, complete all as specified and as directed. |
| 71 | S&F pull out 3 shelf(Appx size)300 x485x530 mm size fabricated with purpose made stainless steel of grade 304,weight as per site requirement per each rack using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws complete all as specified and as directed. |
| 72 | S&F multipurpose double tier of (Appx size)300 x485x430 mm (+ or - 10 % variation as per site requirement), fabricated with purpose made stainless steel of grade 304,weight as per site requirement per each rack , using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws complete all as specified and as directed. |
| 73 | S&F telescopic channels, soft closing, powder coated with ball bearings, suitable for sliding SS plate racks 60 cm long, standard width, fixed over and including 2nd class hard wood rectangular fillet sectional area exc. 3 sq.cm & n.exc. 6 sq.cm, clean swan secured with screws and the fillet fixed on cudappah stone with screws, all as specified and as directed. |
| 74 | S&F stainless steel matt finish profile handle of any shapeof approved design and size and makecomplete all as specified and as directed. |
| 75 | S&F stainless steelfinish soft closing hingesof approved design, shape and make with ISI mark embosed on it, fixed in repairs with nut screws & washers complete all as specified and as directed. |
| 76 | S&F of 18mm thick marine plywood as per IS 710, laminatedone side and edges of any colour with high glossy acrylic sheet of 1-2mm thick grade I of frame & shutter and other side balancing white lamination for kitchen cabinets complete all specified and as directed. |
| 77 | M&L for providing and fixing stainless steel (Grade 304), ornamental railing and frame work for moduler kitchen and door made of hollow tubes, channels, plates etc., including laser cutting, welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including laser cutting and fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts ,fasterners with min 100 mm deep on concrete or fixing on wooden article etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc complete all as specified and directed |
| 78 | M&L for core cutting of 150mm dia, n exc 600mm deptth/width in stone wall and making good disturbed surfaces and filling the remaining area with cement concrete (1:2:4)type B-1 using 20mm graded stone aggregate complete all as specified and directed. |
| 79 | M&L for taking down existing water proofing treatment of any description and layers from wall/roofs including screed bed or bedding layers of mortar , concrete in any position complete and cleaning the surface by grinder to make it smooth and even, free from dust scrubbing down with water complete all as specified and clearing the premises complete all as specified and directed |
| 80 | M&L Brushing with neat cement slurry @ 3Kg/Sqm on concrete surfaces complete all as specifiedand directed. |
| 81 | M&L for 15 mm thick Plaster on RCC roof slab with CM 1:4 including water proofing compound @ 3 % by weight of cement shall be carried out as specified and directedNote : WPC shall measured and paid separately. |
| 82 | M&L for preparing plastered surfaces, applying uniform coat of primer @ 0.30 Kg/Sqm and applying water proofing treatment on roof/wall ,edges and vertical surfaces using 3 mm thick APP modified bitumen based prefabricated water proofing membrane reinforced with non woven polyster matt black finished weighing not less than 3.50 kg/sqm andbonding material85/25bitumen1.2 Kg/Sqmbeforeandafter layingmembranelaidbytorchapplication and overlaps of 100 mm for side laps and 150 mmfor end laps must be tourched, further apply coat of bituminious reflective aluminium paint @ 0.15 litrs per sqm above membrane all as specified and directed |
| 83 | Supply only integral water proofing compound complete all as specified and directed. |
| 84 | Disconnecting existing tanks, exc 500 lit and nexc 1000 Litsetting aside (or loweringif required)for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 85 | S&F in repairs rotational moulded polyetylene water storage tanks three layer (cylindrical vertical with closed top) of 1000 Litres capacityhoisted and fixed in position and connecting up pipes and ball valve complete set of PTMT, securing access covers all as specified and directed |
| 86 | M&L for removing of Aluminium cubical Partition carefully and refixing of the same at the same location after making tiling works etc complete all as specified and as directed. |
| 87 | M&L for removing of work station along the wall carefully etc complete all as specified and as directed. |
| 88 | M&L for removing of existing worn out carpet from the floor carefully etc complete all as specified and as directed. |
| 89 | M&L for removing of existing File storage compactor and floor mounted rails from the floor carefully etc complete all as specified and as directed. |
| 90 | Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced, including rubbish off outside of MOD land complete all as specified and as directed. |
| 91 | M&L for coloured joint free homogeneous glazed dark shade full body vitrified tiles as per IS 15622: 201, water absorption <0.05%, MOH hardness > 6, breaking strength >1500, high abrasion and stain resistant PEI III-V (Gloss PEI II-III) dark shade 9-10 mm thick (square/ rectangular) area of each tiles exceeding0.70 sqm but not exceeding 1.00 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with spacer 3-5 mm thick and grouting with epoxy grout including wastage on tiles i.e. raking, circular cutting or notching etc over 20mm thick screed bed in CM (1:4) etc complete all as specified and as directed.Note: Curve floor surface hence no extra measurement to be given to the contractor for wastage. |
| 92 | S&F rolling Venition blinds with design on inner faceverticle type made out of fibre cloth fixed, to wall with necessary aluminium brackets, screws etc including aluminium frame for venilion blinds etc all as approved by GE complete all as specified and directed. Note: design approved by Engr-in-Charge based on users requirement. |
| 93 | M&L for complete removal of existing treatment from wall to make the surface free from dust, loose paint and loose plaster by scrapping manually / mechanically as directed by engr-in-charge (nails, screws if any to be removed properly before scraping) complete all as specified and directed. |
| 94 | Ditto all as per item No 93 abovebut for Ceiling surface complete all as specified and as directed. |
| 95 | M&L for providing and applying water proof cement base putty of 1mm thick over prepared old plastered / old painted wall surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed. |
| 96 | Ditto all as per item No 96 abovebut for Ceiling surface complete all as specified and as directed. |
| 97 | M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed. |
| 98 | Ditto all as per item No 98 abovebut for Ceiling surface complete all as specified and as directed. |
| 99 | M&L for preparing of old surface and applying two coats of 100% premium acrylic emulsion water base luster paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sq.m over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq.m over new surfaces complete all as specified and as directed.NOTE :- All painting work, distempering, cement based paintand luster paintcatered in this BOQ shall be executed at site by authorised applicators of the paint manufacturing companies specified in Appendix \"C\" |
| 100 | Ditto all as per item No 99 abovebut for Ceiling surface complete all as specified and as directed. |
| 101 | M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and directed. |
| 102 | M&L for preparing old treated wooden surfaces of any description, over 10cm in width or girth and applying finishing one coat with synthetic varnish complete all as specified and directed. |
| 103 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\"/9\" to make the surface free from dust,loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 104 | Ditto all as per item No 103 abovebut for Ceiling surface complete all as specified and as directed. |
| 105 | S&Fantique / ornamental Brass hevy duty Hinges, Aldrop, tower bolt, handles, latches, window/door stopper, sliding door bolt etc match to existing for doors, windows, ventilators & banister all as specified and as directed |
| 106 | Taking down exiting copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as directed |
| 107 | M&L for concealed point wiring in and including new PVC conduit medium grade with the help of multi-strandedunsheathed FRLSH copper cable 1.5 sqmm 650/1100Vconforming IS:3419 -1988 adhereing to colour codeincluding earth wire of the size 1.5 Sqmm green colored with modular steel or cast iron terminal boxes and modular cover plates as required at site including making good the disturbed surfaces and matching it with existing surface for the following :-(a)One light/Fan point controlled by one way switch 6 Amps 240 volts |
| 108 | (b)Ditto all as per item No. 108 above but One 3 pin socket outlet, 5/6 Amps on the same board with other switches |
| 109 | (c)Ditto all as per item No. 108 above but One 3 pin socket outlet, 5/6 Amps, independent |
| 110 | (d)Ditto all as per item No. 108 above but one bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sqmm size. |
| 111 | M&L concealed point wiring with 4 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable in and including PVC conduit not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 4 sq mm copper conductor as earth wire to common earth dolly complete all as specified and directed |
| 112 | S&F modular switch 1 way 10 A 1 module all as specified and directed |
| 113 | S&FModular socket 6 A 2/3 Pin2 module all as specified and directed |
| 114 | S&Fmodular switch 1 way 16 A 1 with indicator module all as specified and directed |
| 115 | S&FModular socket 6 A/16A 2/3 Pin2 module all as specified and directed |
| 116 | S&F in replacement of Modular Blank Plate1 module all as specified and directed |
| 117 | S&Fin replacement of ceiling rose, 3 terminals /PVC/Polycarbonate, isolated bodycomplete all as specified and directed |
| 118 | S&F in replacement ofPanel LED round type LED ceiling lights 3 W LED, 6000K Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed. |
| 119 | S&Fin replacement ofHanging LED COB Light 12 W LED, 6000K Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed. |
| 120 | S&F in replacement of surface round type LED ceiling lights 15 W LED, 6000K Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed. |
| 121 | S & F in replacement of 15 watts/m linear flex in colourwhite/warm white,with separate electronic drivers of suitable and IP 65 protection complete ,Single phase,including suitable size of aluminium profile, coneector, end cap,driver includingmountingon the ceiling as reqd at the site complete all as specified and directed |
| 122 | S&F in replacement ofhigh speed wall mounted fan of sweep 400 mm,,Full copper motor,auto thermal overload protection,compact style and powder coated gurads & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories all as specified and directed.Note: Old U/s fan dismantled from site and deposited at MES store Yard. |
| 123 | S&F in replacement of Plastic ventilation Energy Saving Exhaust Fanof 150 mm sweepinclduing replacing the plywood as per the site requirement all as specified and directed Note: Old U/s fan dismantled from site and deposited at MES store Yard.. |
| 124 | M & L for Making of hole suitable for 150mm sweep exhaust fan with the help of core cutting machine for fixing of New exhaust fan in any type of wall / Shifting of exhaust fan from one place to another placerequired at sitemaking good the disturbed surfaces all as specified and directed |
| 125 | M&L for cutting chases for concealed conduit wiring, pinning in and making good to surface where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., cutting not exc 10 cm girth including 3 mm thick wall care putty on wall, making surface matching to adjacent surface all as specified and directed. |
| 126 | Taking down exiting copper/aluminium sub main wiring complete for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed |
| 127 | M&L forconcealed sub main wiring with two single core PVC insulated FRLSHcables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 2.5 sqmm continuous earth wirecomplete all as specified and directed. Note: Two runs of 2.5 Sqmm cable with 01run of 2.5 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM |
| 128 | M&L forconcealed sub main wiring with Two single core PVC insulated FRLSHcables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 6 sqmm continuous earth wirecomplete all as specified and directed Note: Two runs of 06 Sqmm cable with 01 run of 6 Sqmm earth wire along withPVC conduit medium grade shall be measured as one RM |
| 129 | S&F in repairs MCB DB 12 way SPN Double door sheet metal enclosure factory made suitable for MCB DB\"s 240 volts,concealed in wall complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site complete all as specified and directed .Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced. |
| 130 | S&F in replacement of MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed |
| 131 | S&F in replacement of of C Curve MCB SPN 40 Amps working on 240 volts, 50 HZ,10 KAall as specified and directed |
| 132 | Supply and Installation of Electric Chimneys 90cm Min Noise Levels in 41dB,Max Suction 1587 m3/hr,9 speed,Intelligent Autoclean Gesture Control,Silent Inverter Motor / Smart On, Warranty on Appliance 2 Year,Warranty on Motors 10 Years and Professionally install the electric chimneys, including mounting, electrical connections, and testing.Securely mount the chimney on the wall or ceiling, ensuring it is level and stable.Install ductwork to vent the exhaust outside, ensuring minimal noise and maximum efficiency.Test the chimney to ensure it operates correctly and efficiently. Provide a demonstration to the user on how to operate and maintain the chimney andClean the installation area, removing any debris or packaging materials.all as specified and directed |
| 133 | S&F in repairs modular BLDC fan regulator, 2 module, suitable for ceiling fan of 1200/1400mm sweep all as specified and directed |
| 134 | S&F in replacement modular Bell push, 10 Amp with neon indicator one module complete all as specified and directed |
| 135 | S&F in repairs Modular USB Charger all as specified and directed |
| 136 | S & F in repairs RJ-11 telephone socket with transparent shutter 1 module alongwith flush metal box 2 module and front cover plate 2 moduleall as specified and directed |
| 137 | S &F in repairs for LAN RJ-45 Jack With Cat 6 socket UTP Catwith transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module all as specified and directed |
| 138 | S &F in repairs for TV socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 moduleall as specified and directed |
| 139 | S&F in repairs polycarbonate Fancy Angle Holder Metal Ring angle holder retrofit type suitable for LED bulb of B-22 base complete all as specified and directed |
| 140 | S&F LED ROJO 7 W B22 RED/GREEN LAMPall as specified and directed |
| 141 | M&L in replacement of door bell AC 230 volts single phase ding dong type all as specified and directed. |
| 142 | S&F in repalcement recess mounted 2\" x 2\" LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving,high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver. |
| 143 | S & F in repairsLED focus COB Light TiltableLamp light 7WLED luminaire in powder coated whitein round profile with optimized heat sink for efficient heat dissipation of 7W LED WW/WH/NW 6500K colortemperature etc. prewired and all accessories complete all as specified and directed. Make: Lukar LHL216E GY or equivalent make as mentioned at list of makes in PS |
| 144 | S&F in repairs decorative suspended LED Light with high efficiency providing soft-light and glare free symmetrical illumination including suspension kit E 27 holder with 9W lamp including connecting up with twin core twisted flexible copper cable to fitting complete all as specified and directed. Make- Luker LHL216E GY or equivalent make as mentioned at list of makes in PS |
| 145 | S&F in repairs 14 watt,230V surface and wall mounted warm white LED Mirror Lightincluding connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified and directed |
| 146 | S & F anchor Bolt on the RCC roof Drill holes at the marked locations using a masonry drill bit. Ensure the holes are deep enough to accommodate the entire length of the anchor bolts.Place the mounting bracket over the anchor bolts and secure it by tightening the nuts with a wrench. Ensure the bracket is firmly attached and level.Ensure all connections are secure and the fan is stable all as specified and directed. |
| 147 | M&L for replacing the down rod of ceiling fans with 5 feet GI ceiling fan hanging down rod with necessary clamp accessories all as specified and directed |
| 148 | Taking down ceiling fan/Exhaust Fan, sealing cable end,dismantling blades and removing fan and blades to AGE E/M store yard all as specified and directed |
| 149 | S&F ceiling fan complete with blades, down rods and other accessories, 230 V, 1200 mm sweep with Minimum air delivery of 210 CMM BEE Five star rated with brushless direct current motor (BLDC), white/Ivory in colour all as specified and directed |
| 150 | S&F of high speed wall mounted fan with BLDC Motor fan of sweep 400 mm,,Full copper motor,auto thermal overload protection,compact style and powder coated gurads & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories all as specified and directed. |
| 151 | M&L for Provn ofPVC conduit for Telephone/TV/LAN/CCTVnot less than 25 mm with Cutting chases for concealed conduit wiring, pinning in and making good to surface where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., cutting not exc 10 cm girth including 3 mm thick wall care putty on wall, making surface matching to adjacent surface all as specified and directed. |
| 152 | M&L forconcealed sub main wiring with two single core PVC insulated FRLScables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 4 sqmm continuous earth wirecomplete all as specified and directed Note: Two runs of 04 Sqmm cable with 01run of 4 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM |
| 153 | S&F in replacement sheet metal enclosures double pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as specified and directed |
| 154 | S&F in replacement of MiniC Curve MCB SP 32 Amps working on 240 volts, 50 HZ,10 KAall as specified and directed |
| 155 | M & L for making holes by core cutting machine on stone/concrete / brick walls.Dia of hole not exc.20mm to 40mm and thickness of wall 50cm to 70cm for entry of PVC conduit for concealed wiring and making good distarbed surfaces with cement morter and finally finished with plaster of parise and painted the distrubed surfaces with existing type of paint and tint complete all as specified and directed. |
