|
| 1 | Taking down carefully copper / aluminium point wiring light, fan, light fittings, socket or power complete, such as switches, ceiling roses, pendents, regualtors, sockets etc removing materials to store for keeping in safe custudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc complete all as specified and directed . |
| 2 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS), ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit after cutting, chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modular plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cables as earth continuity conductor to common earth and connecting to earth dolly for one light point controlled by one switch. (Note- Modular switch and sockets will be measured and paidseperately) |
| 3 | All as per item No 2 above but for one fan point controlled by one switch |
| 4 | All as per item No 2 above but for one bell point controlled by one bell push |
| 5 | All as per item No 2 above but for one 3 pin socket outlet , 6 Amps on same board |
| 6 | All as per item No 2 above but for one 3 pin socket outlet , 6 Amps on Independent board |
| 7 | All as per item No 2 above but with 2.5 Sqmm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sqmm PVC insulated copper conductor unsheathed 1100v grade IS-694 FRLS cable for continuous earth wire 2.5 Sqmm FRLS all as specified and directed by Engr-in-Charge (Only one 15 Amp point will be in one circuit) |
| 8 | S&F Modular switch 6 Amps, 230 V, single pole, one way, 1 module complete all as specified and as directed |
| 9 | S&F Socket,modular type 2/3 pin combined 2 module, 6 Amps, 230V complete all as specified and as directed. |
| 10 | S&F Modular switch 16 Amps, 230 V, single pole, one way, 1 module complete all as specified and as directed |
| 11 | S&F Socket, modular type 2/3 pin combined,2 module, 6 Amps/16 Amps complete all as specified and as directed. |
| 12 | S&F Modular step step type fan regulator suitable for ceiling fan of 1200mm sweep, 120 watts, 2 module complete all as specified and as directed. |
| 13 | S&F Modular bell push 6 Amps 230V, single pole, one way, 1 module complete all as specified and as directed. |
| 14 | M&L point wiring with 1.5 Sq.mm (nominal aea) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, drawn thorugh and including PVC casing and capping /surface conduit complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI marked) for mounting switches/regulatoretc and including 1.50 Sqmm (nominal area) complete with 1100 volt grade PVC insulated unsheathed multistranded FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for 15 Amps socket controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and directed.Note- Modular switch and sockets will be measured and paidseperately) |
| 15 | All as per item No 14 above but for one fan point controlled by one switch |
| 16 | All as per item No 14 above but one bell point controlled by one No bell push |
| 17 | All as per item No 14 above but for one 3 pin socket outlet , 6 Amps on same board with the cables 1.5 Sqmm size complete all as specified and directed. |
| 18 | All as per item No 14 above but for one 3 pin socket outlet , 6 Amps on independent board with the cables 1.5 Sqmm size complete all as specified and directed. |
| 19 | All as per serial item No.14 here-in-before but wiring with 2.5 Sqmm including 2.5 Sqmm PVC insulated unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core earth continuity conductor connected to common earth dolly for one 3/5 pin 15 amps switch socket out let on independent board. |
| 20 | S&F Switch piano, flush button single pole one way 5 Amp complete all as specified and as directed. |
| 21 | S&F Socket out let 3 pin 5 Amps, flush type complete all as specified and as directed |
| 22 | S&F Switch piano 16 Amps flush type single pole one way suitable for 240 volt AC complete all as specified and directed by Engr-in-Charge |
| 23 | S&F Socket outlet 2 in 1, 5 pin 16 Amps flush type suitable for 240 volt AC complete all asspecified and directed. |
| 24 | S&F Stepped type electronic fan regulator flush type AC 230V complete all as specified and directed |
| 25 | S&F Bell push, flush type 5 Amp complete all as specified and as directed. |
| 26 | S&F Ding dong bell AC 230 volt single pole complete all as specified and directed. |
| 27 | S&F Ceiling rose, surface bakelite, 65mm x50mm2 or 3 terminals, PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed. |
| 28 | Taking down of light fittings of any wattage complete all as specified and directed |
| 29 | Supply and fixing for wall mounted LED batten extruded aluminium heat shrink provide for efficient heat dissipation and integrated electronic driver, 20 watt LED fitting with 100 lumen/watt, 6000k, 230 volts, diffuser optics, etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed by Engr-in-Charge. Note - Cat Part No LDL-20-WW of Crompton or equivalent make |
| 30 | Supply and fixingfor wall mounted LED batten extruded aluminium heat shrink provide for efficient heat dissipation and integrated electronic driver, 10 watt LED fitting with 100 lumen/watt, 6000k, 230 volts, diffuser optics, etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed by Engr-in-Charge. Note - Cat Part No Cat Part No LDL-10-WW of Crompton or any equivalent make. |
| 31 | Supply and fixingfor wall mounted LED bulk head fittings, 10 watt, 230 volts, diffused optics etc complete with all accessoreis, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and as directed . Note - Cat Part No Cat Part No LLBHP-10-CDL of Crompton or any equivalent make. |
| 32 | Supply and fixingfor decorative, wall mounting, champagne gold finish fixture with plastic body suitable upto 15W LED lamp B22 base with flexible copper wire three core cable complee all as specified and directed. Note - Cat Part NoCat Part No LLBHP-10-CDL of Crompton or any equivalent make |
| 33 | Supply and fixingfor surface mounted squre shape 10 watt 220 volts AC, metal housing, powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Note - Cat Part No LLBHP-10-CDL |
| 34 | Supply and fixingfor surface mounted round shape warm white 10 watt 220 volts AC, metal housing, powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. Note - Cat Part No LCRP-10-CDL |
| 35 | Re-fixing of LED light fittings of any size and any watt including connecting accessories and making good surface on wall complete all as specified and directed. |
| 36 | S&F in replacement Modular socket, 6A 2/3 pin combined 2 module, suitable for 240 volt AC complete all as specified and directed and as per existing. |
| 37 | S&F in replacement Modular socket, 6/16A, 2/3 pin combined 2 module, suitable for 240 volt AC complete all as specified and directed. |
| 38 | Supply and fixing in replacement for modular switch 6 Amps, 230 V, single pole, one way, 1 module complete all as specified and as directed |
| 39 | Supply and fixing in replacement for modular switch 16 Amps, 230 V, single pole, one way, 1 module complete all as specified and as directed |
| 40 | supply and fixing in replacementfor modular step step type fan regulator suitable for ceiling fan of 1200mm sweep, 120 watts, 2 module complete all as specified and as directed. |
| 41 | Supply and fixing in replacement for modular bell push 6 Amps 230V, single pole, one way, 1 module complete all as specified and as directed. |
| 42 | Supply and fix in replacement for switch piano, flush button single pole one way 5 Amp complete all as specified and as directed. |
| 43 | Supply and fix in replacement for socket out let 3 pin 5 Amps, flush type complete all as specified and as directed |
| 44 | S&F in replacement for switch piano 16 Amps flush type single pole one way suitable for 240 volt AC complete all as specified and directed by Engr-in-Charge |
| 45 | S&F in replacement socket outlet 2 in 1, 5 pin 16 Amps flush type suitable for 240 volt AC complete all asspecified and directed. |
| 46 | Supply and fix in replacement bell push, flush type 5 Amp complete all as specified and as directed. |
| 47 | Supply and fix in replacement for stepped type electronic fan regulator flush type AC 230V complete all as specified and directed |
| 48 | S&F in replacement Modular socket, 32A 3/5 pin 2 module, suitable for 240 volt AC complete all as specified and directed. |
| 49 | S&F in replacement 3 pin plug top 15 Amps all as specified and directed by Engr-in-Charge |
| 50 | Taking down the old white hylem sheet from the existing flash metal box and S&F new supper quality white hylium sheet of size 8\" x 10\" complete all as specified and as directed by Engr-in-Charge |
| 51 | All as per item No 50 above but of size 5\" x 5\" complete all as specified and as directed by Engineer -in- Charge |
| 52 | All as per item No 50 above but of size 8\" x 5\" complete all as specified and as directed by Engineer -in- Charge |
| 53 | All as per item No 50 above but of size 9\" x 5\" complete all as specified and as directed by Engineer -in- Charge |
| 54 | Supply & fix in replacement batten holder PVC white suitable for retrofit type CFL/LED lamp complete all as specified and as directed. |
| 55 | Supply and fix in replacement white cover plate with frame, 1 module complete all as specified and directed by Engineer -in-Charge |
| 56 | Supply and fix in replacement white cover plate with frame, 2 module complete all as specified and directed by Engineer -in-Charge |
| 57 | S&F in replacement modular metal flush box 1 module complete all as specified and directed by Engineer-in-Charge |
| 58 | S&F in repaplacement Modular metal flush box 2 module complete all as specified and directed by Engineer-in-Charge |
| 59 | Supply and fixing in replacement PVC gang box suitable for 4 way for mounting switches and sockets complete with screw and necessary arrangement complete all as specified and directed by Engineer in Charge |
| 60 | Supply and fixed in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single poel 20 Amps MCB complete all as specified and directed. |
| 61 | S&F in replacement of exhaust fan heavy duty metal body 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engr-in-Charge. |
| 62 | S&F in replacement of exhaust fan heavy duty metal body 225 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engr-in-Charge. |
| 63 | S&F in replacement of exhaust fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engr-in-Charge. |
| 64 | S&F in replacement of wall mounting fan heavy duty 400 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engr-in-Charge. Model No Swing Penta Wall fan |
| 65 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230v, 1200 mm sweep, min air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) with remote control complete all as specified and directed by Engr-in-Charge |
| 66 | S&F in replacement of fan capacitor with copper wire plastic body 2.5 mfd complete all as specified and directed |
| 67 | S&F in replacement of fan cpacitor with copper wire plastic body 3.15 mfd complete all as specified and directed |
| 68 | S&F in replacement of fan capacitor with copper wire plastic body 4.0 mfd complete all as specified and directed. |
| 69 | Taking down electric water heater / geysers of capacity 25 ltrs from its mounting place for repair and re-fixing the same after repair and testing complete all as specified and as directed by Engr-in-Charge.Note:- The spare items required for repair will be measured and paid seperately. |
| 70 | Taking down electric water heater / geysers of capacity 50 ltrs from its mounting place for repair and re-fixing the same after repair and testing complete all as specified and as directed by Engr-in-Charge.Note:- The spare items required for repair will be measured and paid seperately. |
| 71 | Supply and fixing in repalacement of heating element of 2 KW rating double tube type with cup type of circular / triangle shape including rubber washers suitable fit in the existing geyser without any water leakage complete all as specified and as directed. |
| 72 | Supply and fixing in replacement of heavy duty element holding assembly including rubber gasket suitable for 25 litres capacity geysers with provision for safety valve in its inlet, pocket for thermostat / thermal cut system and drain plug including taking down of unserviceable water heater and refixing the same after repair all as per site requirement and directed. |
| 73 | All as per item No 72 above but for 50 litres capacity geysers |
| 74 | Supply and fixing in replacement of vertical non return valve 15 mm dia GM including GI fitting such as union, nipple, elbow, socket etc as required at site complete all as specified and as directed. |
| 75 | Supply and fixing stainless steel inner tank 24 gaugeheavy duty in replacement of stainless steel inner tank suitable for the existing 25 ltrs capacity geysers complete all as specified and as directed. |
| 76 | Supply and fixing stainless steel inner tank 24 gaugeheavy duty in replacement of stainless steel inner tank suitable for the existing 50 ltrs capacity geysers complete all as specified and as directed. |
| 77 | Supply and fixing in replacement of thermostate for the geysers 25 Ltrs/50 Ltrs capacity as per site requirement complet all as specified and directed |
| 78 | Supply and fixing in replacement of heavy duty PVC connecting pipe with brass adapters 450mm long suitable for 15mm dia pipe and fixing in position all as approved by Engr-in-Charge |
| 79 | Supply and fixing in replacement of heavy duty PVC connecting pipe with brass adapters 300mm long suitable for 15mm dia pipe and fixing in position all as approved by Engr-in-Charge |
| 80 | Taking down old unsv VTPN DB of any size complete all as specified and directed |
| 81 | Supply and fixing load line vertical distribution board made out of CRCA sheet, double door, concealed in wall TPN 04 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable for TP incorner MCCB of 160 Amps complete all as specified and as directed by Engineer-in-Charge. Note - Cat Part No DEVTH004DD of LT or any equivalent make. |
| 82 | Taking down old unsv MCB SPN DB of any size complete all as specified and directed. |
| 83 | Supply and fixing MCB distribution board with Bus bar 200A neutral link, earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type concealed in wall complete all as specified and as directed. Note - MCB shall be measured and paid seperately.(ii) cutting chasing and making good to existing surface also included in the unit quoted rate of item. |
| 84 | All as per item No 83 above but SPN 12 way |
| 85 | S&F in replacement of MCCB 160 Amps FP 415 volts, 3 Phase 50 Hz, Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed. |
| 86 | S&F MCB SP 6 to 32 Amps 10KA, 240 volt \"C\" series complete all as specified and directed. |
| 87 | S&F MCB SP 40 Amps 10KA, 240 volt \"C\" series complete all as specified and directed. |
| 88 | S&F MCB SPN 40 Amps 10KA, 240 volt \"C\" series complete all as specified and directed. |
| 89 | S&F MCB TP 25 to 63 Amps 10KA, 240 volt, 50 Hz\"C\" series complete all as specified and directed. |
| 90 | Taking down carefully sub main wiring of any type and size including fittings and fixtures, removing materials from site complete all as directed. |
| 91 | M & L fir in submain wiring with two run of 6.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuity conductor drawn through and under suitable size of rigid non metallic PVC conduit/cassing caping, medium grade, ISI marked (not less than 25 mm dia) complete with all accessories and fittings all laid/fixed concealed in wall and surface conduit on ceiling portion only complete all as specified.Note - 3 Runs of 06.0 Sqmm and one run of PVC conduit will be used as one unit for measurement purpose. |
| 92 | All as per item No 91 above but for 4. 0 sqmm wire |
| 93 | Supply, installation & testing earthing in rocky area of Burnished metal copper earthing electrode 50mm dia 3 mtr long, outer dia 50 mm 3 mtr long with strip terminal 40 x 5mm, 90mm length with 2 holes of 10mm with the pipe thickness of 1.2 mm non exothermic welding, iner electrode 16mm solid rod, filled with highly conductive compoind non corrosive non hydroxylation inclusive of 2 bag of Chemical earthing electrode 50 Kgs, 25 kg bag each with the chemical composition Carbon as graphite 80%, AI203 18-32%, FE203 4-11%, CALCIUM, CARBON, COPPER 10 to 15%, Moisture content 1.06%, chloride 300ppm, cadmium not detected, antimony 100pm complete all as specified and directed. |
| 94 | M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or DB\"s/Indoor type LT PBs orany other indicated situation for loop earthing etc.4mm dia galvanised iron or steel wire all as specified and directed. |
| 95 | Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and as directed by Engr-in-Charge. |
| 96 | Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and as directed by Engineer-in-Charge |
| 97 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge |
| 98 | M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm. |
| 99 | Supply and lay precast concrete cable covers,class LV,type- I flat size 250mm x 150mm x 40 mm , all as specified and directed. |
| 100 | Taking out old unserviceable LT under ground cable any type from trenches,pipes & poles complete |
| 101 | Supply laying and testing ofXLPELT 1100 Volt Grade, armourd underground cable size of10 Sqmm 2 core with stranded aluminium conductorin trenches /passing through pipes/ on poles etc complele all as specified and directed. |
| 102 | All as per srl item No 101 above but 16 Sqmm 2 core |
| 103 | All as per srl item No 101 above but 16 Sqmm 4 core |
| 104 | All as per srl item No 101 above but 25 Sqmm 4 core |
| 105 | All as per srl item No 101 above but 50 Sqmm 3.5 core |
| 106 | All as per srl item No 101 above but 70 Sqmm 3.5 core |
| 107 | All as per srl item No 101 above but 95 Sqmm 3.5 core |
| 108 | All as per srl item No 101 above but 120 Sqmm 3.5 core |
| 109 | All as per srl item No 101 above but 185 Sqmm 3.5 core |
| 110 | Supply & jointing heat shrinkable straight through joint suitable for LT 1100 Volt grade XLPE cable of size 240 sqmm 3.5 core complete all as specified and as directed. |
| 111 | All as per item No. 110 here in before but suitablefor cable size 150-185 sq mm.Make : 3M / Denson/Reychem |
| 112 | All as per item No. 110here in before but suitablefor cable size 70-120 sq mm.Make : 3M / Denson/Reychem |
| 113 | All as per Srl item No 110here in before but suitablefor cable size 25-50 sq mm Make : 3M / Denson/Reychem |
| 114 | M&L for galvanised steel tube, light grade with all fitting complete laid in trenches/ road / Path/ on pole of80 mm bore all as specified and as directed. |
| 115 | All as per srl item No 114 above but50mm bore |
| 116 | All as per srl item No 114 above but40mm bore |
| 117 | Dismantling concrete poles/steel tubular poles ,struts of any size all as specified and as directed by Engineer-in-Charge. |
| 118 | Supply, install erect in trench vertical position steel tublar swan neck seweaged welded poles complete with MS base plate of 6mm thick of size 450mm x 450mm final taper plug pole cap bolt nut and screwed, pole made out of ERW MS tubing confirming to IS 2713 Part II of 8.5 mtr long 410 SP-22 including drilling of holes of required size and nos for cables etc, with inbuilt junction box for 3 phase 4 wire AC supply with bakelite connector, MCB SP 6 Amps etc and painting with one coat of red oxide primer and two coat of aluminium paint for exposed surface and two coat of black bituminious paint for the portion embeded in concerete complete all as specified and as directed by Engineer -in-charge including necessary PCC in foundation and coping all as per SSR part-I . |
| 119 | M &L inreplacement of lugs/thimbles at termination of LT cable by cutting the end portion and removing insulation and fixing new aluminium lugs /thimble properly with crimping tool of size 185 -400 sq mm complete. |
| 120 | All as per srl item No. 119here in before but for cable size 50-150 sq mm |
| 121 | All as per srl item No. 119 here in before but for cable size upto 35 sq mm . |
| 122 | Material and labour for preparation of old painted / rusted surfaces by scrapping of steel tubular LT pole 9 mtr long inculding cross arms and clamps of any size and applying one coat of aluminum paint (1st quality) includingwhite /blue 30 cm wide strip upto the height of 1.5 mtr above ground level and marking the pole No in 4” dia white paint complete all as specified anddirected by Engr-in-Charge |
| 123 | M&L for augering of holes in true horizontal position under road /pavement by means of mechanical rig after doing ultrasound technique to prevent any damage to existing cables/pipe lines coming in route 1.5 Mtr deep and not exceeding 15 Mtrs long including laying HDPE pipe of 150mm dia complete all as specified and directed. |
| 124 | S&F in replacement of MCCB 400 Amps FP 415 volts 3 phase 50 HZ,Ics=100%Icu , breaking capacity 36 KAcomplete all as specified and directed. |
| 125 | All as per srl item No 124 here in before but 250 Amps 36KA all as specified and directed by Engineer-in-Charge |
| 126 | All as per srl item No 124 here in before but 200 Amps 36 KA all as specified and directed by Engineer-in-Charge |
| 127 | All as per srl item No 124here in before but 125 Amps 16 KA all as specified and directed by Engineer-in-Charge |
| 128 | All as per srl item No 124here in before but 63 Amps 16 KA all as specified and directed by Engineer-in-Charge |
| 129 | M&L for defect rectification LT cable laid in trenches by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc.including and additionalexcavation in normal strata required forexposing the cable faultremoval of deteriorated portion of cable treating of cable and keeping the same ready for jointing work for cable of size up to 400 Sq mm 3.5 core. The fault locating equipments will be brought to site within the hours of instruction from Engr-in-Charge |
| 130 | Supply and fixing Vertical type load line distribution board, double door, 8 way, AC ,3 Phase, 415 volts ,TPN, bus bar 200 Amps, rating and earth bus & din rail suitable for MCCB,IP 43 , metal door complete all as directed |
| 131 | Supply and fixing MCCB, 4 pole,125A ,10KA all as specified and directed |
| 132 | Supply and fixing in replacementMCB240V, 10KA \"B\" curve miniature circuit breaker (MCB) of FPand current carrying capacity in the MCB DB complete with connection testing and commissioning. MCB, TPN 63A ,10KA complete all as specified and directed |
| 133 | Supply and fixing in replacementMCB240V, 10KA \"B\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. MCB, SP, 6-32A ,10KA complete all as specified and directed |
| 134 | Supply and fixing in replacement of MCB, TP 25 to 63 A ,10KA. 415V 10KA \"B\" curve miniature circuit breaker (MCB) TP and current carrying capacity in the DB complete with connection testing and commissioning. complete all as specified and directed. |
| 135 | M & L for welding hinges to existing panel board with existing shutters and fixing to panel board completevall as specified and directed. |
| 136 | M & L for replacement of shutter of with 3 mm thick CRCA sheet as per existing Size to match with theexisting panel and welding hinges and fixing completevall as specified and directed. |
| 137 | M & L forpainting ofexisting LT panel with spray gun with paint to match with the existing colour/surfacecompletevall as specified and directed. |
| 138 | M&L in replacement of PVC insulated service cable flat or roundsheathed, aluminium, multistranded conductor 1100V grade size16 Sq mm 2 core complete all as specified and directed. |
| 139 | All as per srl item No. 45 here in before 10 Sq mm 2 core complete all as specified and directed. |
| 140 | Supply and fix in replacement junction box of size 200mmx150mmx100mm made out of FRP with double stud hinged door locking including electric connection for 3 phase out going cable and single phase connection for street light fitting incl controlled MCB SP-10Amps -01 Nos with suitable connector for looping duly sealed with rubber plugs enclosed in thermo plastic inclosed shock proof safe IP-65 weather vermin proof dust and water proof complete with cable entry incl glands of standard size with 2 Nos mild steel clamps made out of MS flat of size 25 x 5mmto be fixed on pole complete all specified. |
| 141 | Supply and fix in repair polycarbonate round unbreakable doom shape white globe light lamp for outdoor pole/piller/gate/garden etc complete all as specified and directed. |
| 142 | S&F in repalacement of street light bracket made out of 40 mm dia light grade GI pipe bend to shape 1.2 m long with 02 Nos clamp made out of 25 x 6mm GI strip including drilling holes bending welding and made to clampes on building/concrete/Rail/Tubular pole. |
| 143 | Supply and fix in repair modular switch 10 Amps, 230 V,single pole, 2 way, 1 module complete all as specified and as directed. |
| 144 | Supply in fix in repair modular plate 6 module, modular type complete all as speciied and directed. |
| 145 | Supply in fix in repair modular plate 8 module, modular type complete all as speciied and directed. |
| 146 | Design, supply, install, testing and commissioning factory made LT Panel Outdoor type, cubical enclosure compartmentalizedexternaland internal mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc.The enclosure shallbe made of 2.00 mm thick stainless steel sheet SS 316 sheet. The fixing of doubledoors shall be on SS hinges with anti-theft provision. All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 316. Sliding handle and locking arrangement front and rear both side. Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. Degree of protection shall be IP-54. The enclosure shall have provision of cable entry. Cable entry from bottom side including cable alley both side of panel duly insulated from bus bar with bakelit sheet and internal wiring with PVC insulated solid, copper wire, 1100 volts grade. The panel shall consist of 800 Amps rating TPN aluminium bus bars and shall be provided with colour coded heat shrinkable sleeves. The panel shall be provided with separate compartments for each switch grar, including instrumentation such as Multi Function meter, phase indicating lamps etc with double stud hinged door, front & rearopenable with locking arrangement including interlocking with switch gears and suitable for 1100 Volts grade, 3 Phase, 415 Volts, 50 cycles, AC Supply and to with stand short circuit fault level of not less than 10KA. The panel shall be fixed with angle iron frame made of angles of size 50 X 50 X 6mm, embedded 200 mm below ground level in PCC 1:2:4, Type B-1 using 20mm grade stone aggregate, 600 mm above ground level and comprising the following: Incoming:-(a) MCCB 500 Amps 4 Pole, 36 kA, 50Hz at 440 Volts ,ICS=100% Icu & RHOM- 01 No (c) LED type Phase indicator lamps (R, Y, B) with Control MCB 6 Amps SP- 1 Set Outgoings:-(a) MCCB 63 Amps 4 pole rupturing capacity 25 KA at 415,ICS=100% Icu & RHOM- 13 (12 Nos + 01 Spare)(b) MCB SPN 40 Amps - 01(c) MCB SP 6 to 32 Amps - 02Note : (i) Rates are inclusive for fixing of suitable size cable gland if required in existing or new cable, CT and electrical connections complete to function multi functional meter.(ii)Danger notice plate must be fixed on panel. The panel manufacturer should have following Govt. Approved Certificates: 1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54(IS/IEC : 61439 (Part-1), 2011& IS/IEC : 61439 (Part-2) 2011) 2. Tempreature Rise (IS/IEC : 61439-1, 2011 & IS/IEC : 61439-2 2011) 3. CPRI Short Circuit IEC-61439-1 & 2 withstand strenght should be 70kArms for 1.0 Sec with intial peak of 154kApk 4. CPRI Certification IEC-61439-1 & 2 Rated current for short circuit not less than 5000 A with rated insulation voltage 660V 5. ISO 9001 CERTIFIED |
| 147 | Supply and fixing in replacement energy efficiency LED Bollard light 12W with aluminium housing clear toughened glass IP 65, operating voltage 140V to 270V, 50 HZ, operating temperature -10*C to 50*C and lumen maintenance L70 @ 50,000 Hrs with internal wiring and necessary coping /foundation including taking down existing Bollard light of any watt complete all as specified and directed. Cat Part No HLOB-SQ95-12-WW-FA-.8M of HALONIX or any other equivalent make |
| 148 | Supply and fixing in replacement energy efficiency oxford LED Bollard light 18W made up of cast embleshments with PC diffuser ,IP 65, 50 HZ with internal wiring and necessary coping /foundation as per manufacturer recommendation including taking down existing Bollard light of any watt complete all as specified and directed.Cat Part No SLE BL 18W IP65 OCF 1000 of Surya or any other equivalent make. |
| 149 | Supply and fixingof post top 40W LED, 5700KNew generation energy saving & environmental friendly, long life versatile aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs light sourceIP 66complete all as specified and directed. Cat Part No LPTC-40-CDL of Crompton or any other equivalent make. |
| 150 | Supply and fixingof decorative LED post top 30W LED with suspended lantern range made up of spun aluminium canopy with die-cast aluminium spigot.Fitted with glare free optically designed prismatic diffuser and high efficiency LEDs ,IP 66complete all as specified and directed. Cat Part No SLEPT 30W-VEGA or any other equivalent make. |
| 151 | Supply and fixingof Hampshire LED 40W post top lantern housing is made up of diecast aluminium with top cover in aluminium spiget with low glare PC diffuser high efficiency LEDs ,IP 66complete all as specified and directed. Cat Part No SLE PT40W- HAMPSHIRE of Suriya or any other equivalent make. |
| 152 | M&L for cutting of road/ hard standing up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of cable protection pipe including making good the disturbed road/ hard standing by providing PCC (1:2:4) type B1 and block top with black bituminous upto existing surface level complete all as specified and directed. |
| 153 | Supply laying and testing ofXLPELT 1100 Volt Grade, armourd underground cable size of06 Sqmm 2 core with stranded aluminium conductorin trenches /passing through pipes/ on poles etc complele all as specified and directed. |
