|
| 1 | Taking down chowkhats or framewith shutters (without taking of shutters from the frames) area not exc 1.5 Sqmeach, complete all as directed. |
| 2 | Taking down chowkhats or framewith shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed. |
| 3 | Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 4 | Taking down steel windows and ventilators ( glazed / fly proof) of any description complete all as specified and as directed. |
| 5 | S&F of factory made 35 mm thick 2nd classhard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 6 | M&L factory Made flush shutters, 30 mm thick solid core with block board core construction as per IS 2202(part-I, 1999), one face is covered with decorative face veneer with lipping / frame to match. The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 30mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed. |
| 7 | M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed. |
| 8 | S&F of solid PVC door frame of single side prelam size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as per specified and as directed. |
| 9 | S&F anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified & as directed. |
| 10 | S&F anodised aluminium door shutters powder coating of any colour (Thickness of powder coating not less than 50 micron) , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 11 | S&Fof figured glass, pinheaded type 5mm thick, glazing with oil putty in squares not exceeding 0.5 Sq.m in each panel complete all as specified and directed. |
| 12 | S&F pre powder coated aluminium decogrill all as per approved (sample and section) andfixed to aluminium framework of windows & ventilators. |
| 13 | S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as per specified and as directed. |
| 14 | S&F of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and directed. |
| 15 | All as per item No. 14.00 here-in-above, but MS type. |
| 16 | S&F 100 mm size single action spring hinge,complete all as specified. |
| 17 | S&F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed. |
| 18 | S&F aluminumanodised handle extruded sectionof size 150mm longcomplete all as specified and directed. |
| 19 | S&F of aluminium anodized,tower bolt 150 mm long complete all as specified and directed. |
| 20 | Demolition of cement concrete (unreinforced)in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed. |
| 21 | M&L 50 mm thick PCC 1:3:6type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval,complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 23 | M&Lfor 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), as in base course, to receive floor finishes, complete all as specified & directed. |
| 24 | M&L for non-skid coloured ceramic tiles joint free 7 to 8mm thick (Square/Rectangular)area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed incoloured cement to match including over 15 mm thick screed bed or bedding layers in CM (1:4) for laying in floors finishing ,complete all as specified and directed. |
| 25 | M&L for light shade vitrified ceramic tiles, double charged 9-10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 Square Metre,(size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 26 | All as per item No. 25.00 here-in-above, but as in skirting / dado/ verticle surfaces, over & including M&L 10 mm thick screed bed in cement mortar 1:3, complete all as specified and directed. |
| 27 | M&L forglazed colour ceramic tiles (premium quality) of size 250X350X6-7mm / 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirtingetc, set and jointed in neat cement slurry and pointed in white or colouredcement to match the shade of tiles,over & including M&L 10mm thick backing coat in CM (1:3)complete all as specified and directed. |
| 28 | M&L for 18 to 20 mm thick udaipur green stone slab, as in steps, jambs, pillars, window-cills, cooking plateform/ WHB counter top, machine cut, (table rubbed and polished) best quality as per sample, including &over 15 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitabledia hole in the slab for the gas pipe, complete all as specified and as directed. |
| 29 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in slabs for oval type WHB, sink, cooking platforms and like including &over 15 mm thick screeding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,providing suitabledia hole in the slab for the gas pipe, complete all as specified and as directed. |
| 30 | Taking down cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed. |
| 31 | M&L for 15 mm thick rendering in CM 1:6on stone masonry surfaces or surface other than fair face of stone walls or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. |
| 32 | M&L for rendering / plastering 15mm thick in cement mortar (1:4) on any face of stone walls or concrete surfaces (external surface), finished even and smooth without using extra cement, complete all as specified and as directed.Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. |
| 33 | M&L Rendering 10 mm thick CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc , finished even and smooth without using extra cement, complete all as specified and as directed.Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. |
| 34 | M&L for Preparation ofnew plastered or unplastered surfaces of ceiling and applying two coats of white wash on ceiling surfaces complete all as specified and as directed. |
| 35 | M&L for preparation of new plastered surfaces andapplying 1.5 - 2 mm thick wall care putty on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper paint onwall surfaces as per manufacturer’s instruction, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures.ii)- Paint shall be in one or more colours/ shades all as approved by GE. |
| 36 | M&L Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over & including M&L single coat of chalk white complete all as specified and as directed. |
| 37 | M&L for preparation of old painted wooden surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tintcomplete all as specified and as directed . |
| 38 | M&L for preparation of old painted steel surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tintcomplete all as specified and as directed . |
| 39 | M&L for complete removal of existing treatment and applying 2 mm thick wall care putty on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper paint onwall surfaces as per manufacturer’s instruction, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures.ii)- Paint shall be in one or more colours/ shades all as approved by GE. |
| 40 | M&L for preparation of new or previously untreatedsteel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over& including M&L a coat of red-oxide primer complete all as specified and directed. |
| 41 | S&F in replacement of CP bib taps 15mm dia, cast copper alloy fancy type, long body screwed for iron pipe or for brass ferrule , complete all as specified and directed. |
| 42 | S&F in replacement angular stop cock with wall flange, chromium plated brass, fancy type15mm dia complete all as specified and as directed. |
| 43 | S&F 15mm bore CPbrass,central hole basin mixture pop up waste system with 450 mm long copper pipe and brass nuts ISI Marked sitable for over head counter, complete all as specified and directed. |
| 44 | S&F in repair of CP Wall mixture 3-in-1 system includinjg 1.50 mtr long tele shower for mixing hot & cold water screwed down for iron pipeand fixed , complete all as specified and directed. |
| 45 | S&F in repair of chromium plated shower rose 125mm of ABS body with grey face plate & with arm having swivel joint etc, complete all as specified and directed. |
| 46 | S&F in repairs 15mm bore CP cast copper alloy body, mixture sink cock with hot & cold mixing valves & casted central spout, complete all as specified and directed. |
| 47 | S&F in repairs white coloured vitreous China wash basin, white, flat back, size 630x450mm including brackets, CP waste coupling,chain and plug, 2nos PVC connection 15mm size &45-60cm long and flexible waste coupling etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed |
| 48 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern ) including provision of lime concrete bedding white and making good floor including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan and 32mm dia flush pipe etc, complete all as specified and directed. |
| 49 | S&F in replacement Rimless Single Piece EWC (Brand-I) Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges,Dual Flush Cistern Fitting, FixingAccessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and as directed. |
| 50 | S&F in replacement Rimless Single Piece EWC (Brand-I) Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges,Dual Flush Cistern Fitting, FixingAccessories and Accessories Set,etc complete, P Trap- 300 mm, complete all as specified and as directed. |
| 51 | S&F in repairs 10 ltrs capacity PVC valve less, (ISI Marked) syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets and cistern colour shall be match WC colour, complete all as specified and as directed. |
| 52 | S&F in repairs white vitreous china squatting pan \"Orissa pattern\" of size 580 mm X 440 mmwith integral foot rests and PVC \"P\" or \"S\" trap including M&L for beackets, flush pipe of 32mm dia. And PVC connection of 15mm size 450mm long with PTMT nuts & fixing arrangement of cistern including provision of cement concrete bedding 1:5:10 type E-22,complete all as specified and as directed. |
| 53 | S&F in repairs stainless steel sink with drainage board ,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm x 330mm x 160mm etc including taking down old unservisible sink etc, complete all as specified and directed. |
| 54 | M&L for 75mm outlet dia. PVC (SWR) floor/nahani trap, with CP mild steel grating (with or without hole) including joining to waste pipe fixed in cement concrete type B-1(1:2:4) using 20mm graded stone aggregate, complete all as specified and directed. |
| 55 | Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laidin wall/ceiling/floor of suitable size including stack clamps of 50X3mm MS flat iron with bolts & nuts, complete all as specified and as directed . |
| 56 | Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laidin wall/ceiling/floor of suitable size including stack clamps of 50X3mm MS flat iron with bolts & nuts, complete all as specified and as directed . |
| 57 | S&F 110 mm bore (SWR)PVC bends any radius etc, complete all as specified and directed. |
| 58 | S&F 75 mm bore (SWR)PVC bends any radius etc,complete all as specified and as directed. |
| 59 | S&Fof 75 mm bore PVC [SWR] Junction single [single \"T\"] equal or unequal with access door complete all as specified and as directed. |
| 60 | S&Fof 75 mm bore PVC [SWR] Junction single [double \"T\"] equal or unequal with access door complete all as specified and as directed. |
| 61 | S&Fof 110 mm bore PVC [SWR] Junction single [single \"T\"] equal or unequal with access door complete all as specified and as directed. |
| 62 | S&Fof 110 mm bore PVC [SWR] Junction single [double \"T\"] equal or unequal with access door complete all as specified and as directed. |
| 63 | S&F 110mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 64 | S&F 110mm bore PVC [SWR] branch piece, single (double Y) equal or unequal complete all as specified and as directed. |
| 65 | S&F 75mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 66 | S&F 75mm bore PVC [SWR] branch piece, single (double Y) equal or unequal complete all as specified and as directed. |
| 67 | Taking down carefully cement conc /spalled out concrete fromRCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed. |
| 68 | S&F in replacement TMT bars 12 mm dia fixed by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc,complete all as specified and as directed. |
| 69 | M&L for cleaning the existingreinf of slabs , chajjas etc& applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface.,complete all as specified and as directed. |
| 70 | M&L for applying a coat of bond coat made with cement slurry(1 part cement to 1.5 -2 parts water)mixed with admixtureLATEX POWERmixed @5 Kg per 50 kgof cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.,complete all as specified and as directed. |
| 71 | M&L for 15 -20 mm thick rendering in CM (1:1:2) using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sandover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPERadmixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat. ,complete all as specified and as directed. |
| 72 | M&L for 10 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement ,complete all as specified and as directed. |
| 73 | S&F drawer runners folding typewith guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers, complete all as specified and as directed. |
| 74 | M&L for stainless steel tray as per trade patternof various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge, complete all as specified and as directed. |
| 75 | S&F in repairs decorative type curtain rod stainless steel finishofpipe 22 to 25 mm diawith best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed. |
| 76 | S&F magnetic catchesfor cabinets of suitable size complete with striking plate & magnetic stud complete all as per approved smaple, complete all as specified and as directed. |
| 77 | NOTE:- (i)-The contract sum shall be arrived at after duducting amount of schedule of \"Credit\" from the Total quoted amount |
