|
| 1 | Chair School with hard board (FD/E6/MAP/05) |
| 2 | S&F of one piece seat and back as per drawing and including removal ofexisting seat and back etc, complete all as specified and as directed. |
| 3 | S&F new hand board of chair made out of 18mm thick prelaminated particle board exterior grade with 2mm PVC edge binding of approved make (as approved by GE) and including removing of old unserviceable hand board from chair school etc, complete all as specified and as directed. |
| 4 | S&F of base frame of hand board of chair school, complete all as specified and as directrd. |
| 5 | M&L for welding work wherever required for chair school, complete all as specified and as dircted. |
| 6 | M&L for removal of old painted surfaces by scrapping through grinding machine or by applying paint remover and prepration of smooth raw surface and includind M&L for two coats of synthetic enamel paint 1st quality of approved shade over & including M&L for one coat of red oxide primer by spray machine all as per specification in order to achive high glossy finish etc, complete all as specified and as directed. |
| 7 | CHAIR VERANDAH (FD/MAP-II/06) |
| 8 | M&L for welding joints of leg of 19/20mm MS tubes and other joints as per drg. Etc, complete all as specified and as directed. |
| 9 | S&F in replacement of of PVC shoes (white) of superior quality as approved by GE, complete all as specified and as directed. |
| 10 | M&L for removal of existing wornout cane and re-canning of chair verandah in MAT pattern 4mm wide half round new white plastic cane throughout as per make approved by GE complete all as shown on drawing etc, complete all as specified and directed. |
| 11 | M&L for complete removing of existing paint from chairby scrapping and removing with paint remover and applying two coat of synthetic enamel white paint over & including M&L for one coat of red oxide primer by spray machine & achieve high gloosy finish complete all as specified and directed by EIC. |
| 12 | CHAIR WRITTING (FD/E6/MAP/12) |
| 13 | Taking out old/unserviciable seat and supply & fixed new seat made of 12mm thick hot pressed plywood with acrylic/poly propylenefabric and mouled polyurethene foam 50 mm thick and 50 density with PVC lipping all round complete all as shown on drawing,complete all as specified and directed by EIC. |
| 14 | All as per item No. 3.01 here-in-above,but unserviceable back. |
| 15 | Taking out old broken/unserviciable arm rest of chair writing steel and including supply & fixing new PU arm rest as per drg, complete all as specified and directed by EIC. |
| 16 | M&L for preparation of old painted surface by scraping & rubbing and including M&L for applying two coats of synthetic enamel paint (black) to MS tubular frame of chair writing steel over and including M&L for one coat of red oxide primer etc, complete all as specified and directed by EIC. |
| 17 | Taking out unserviceable/broken frame and S&F new frame as per drg duly painted as per drg and as directed by EIC |
| 18 | CHAIR COMPUTER (FD/E6/MAP/01) |
| 19 | S&F new seat made of 12mm thick hot pressed plywood with fabric polyproplene /acrelic and mouled polyurethene foam40 Density with PVC lipping all round complete all as shown on drawing etc, inclding taking out old/unserviciable seatcomplete all as specified and directed by EIC. |
| 20 | All as per item No. 4.01 here-in-above,but unserviceable back. |
| 21 | S&F new arm rest made of polyurethene as per drg etc, complete all as specified and directed by EIC. |
| 22 | S&F complete pedestralassembly complete all as per drg. etc, complete all as specified and directed by EIC. |
| 23 | S&F new twin wheel castors of required dia etc, complete all as specified and directed by EIC. |
| 24 | S&F new hydrolic cylinder (complete fittings) shall be fixed complete all as per drg etc, complete all as specified and directed by EIC. |
| 25 | Taking out old/un serviceable locking lever assembely and Supply & fix new as shown in drawing etc, complete all as specified and directed by EIC. |
| 26 | HAT STAND WITH MIRROR (FD-233) |
| 27 | Removing of old broken/unserviceable teak plywood from front frame of hat stand andincluding S&F of new 4mm thick OSTF BWP (IS:710) plywood as per shape and size shown in drawing including melamine polishing to match the other parts includingetc, complete all as specified and directed. |
| 28 | Removing of old broken/unserviceable teak plywood from back side of hat stand andincluding S&F of new 4mm thick BWP (IS:710) plywood duly laminated as per shape and size shown in drawing. complete all as specified and directed. |
| 29 | S&F of new brass pegs of size 120x75mm (overall) of latest pattern to hat stand and including removing of old unserviceable aluminium pegs from hat stand etc, complete all as specified and directed. |
| 30 | S&F of new 06x35mm thick teak wood beading all as per drawing including melamine polish with high glossy finish to match the other parts including removing of old broken / unserviceable beading from hat stand etc, complete all as specified and directed. |
| 31 | CHAIR VERANDAH (FD/MAP-II/06) |
| 32 | M&L for complete removing of existing paint from chairby scrapping and removing with paint remover and applying two coat of synthetic enamel white paint over a coat of red oxide primer in order to achieve high gloosy finish complete all as specified and directed by EIC. |
| 33 | M&L for removing unserviceable rubber shoes of chair verandah and providing and fixing new hard rubber shoes in white colour complete all as specified and directed by EIC. |
| 34 | M&L for stiffener of size 12mm square pipe 18G of suitable length (As per existing length) with appropriate MS plate shall be welded below the seat of chair as extra support complete all as specified and directed by EIC |
| 35 | M&L for Removing the unserviceable PVC seat and back from chair verandah and S&F new PVC seat and back 4mm thick seat made of PPCP material weight not less 1.85 kg suitable for chair verandah as per drg and complete all as specified and directed by EIC. |
| 36 | CHAIR DINNING LONG BACK (FD-357) |
| 37 | S&F of new rear leg made of 1st class hard wood (teak wood) complete all as shown on drg. And including removal of unserviceable rear legs of chair dinning long back etc, complete all as specified and directed. |
| 38 | All as per item No. 7.01 here-in-above,but front leg. |
| 39 | All as per item No. 7.01 here-in-above,but seating frame members front, back sides. |
| 40 | All as per item No. 7.01 here-in-above,but bottom/ centre stiffener. |
| 41 | All as per item No. 7.01 here-in-above,but back support. |
| 42 | S&F in replacement of unserviceable plywood for seat and back support with new one 12mm thick and S&F PU foam cushion 40 density with fabric as approved by GE complete as per drg. Etc, complete all as specified and directed. |
| 43 | S&F of hard PVC shoes as per sample approved by GE, complete all as specified and directed. |
| 44 | CHAIR EASY CUSHIONED (FD-358) |
| 45 | M&L for removal of unsv. rear legs of chair easy cushioned and S&F new rear legs made of 1st class hard wood (teak wood) all as shown on drg, complete all specified and directed. |
| 46 | All as per item No 8.01 here-in-above, but Front Leg |
| 47 | All as per item No 8.01here-in-above, but Seating Frame members front, back sides |
| 48 | All as per item No 8.01 here-in-above, but Bottom/Centre stiffener |
| 49 | All as per item No 8.01 here-in-above, but Back support |
| 50 | S&F Replacement of u/s plywood for seat and back supportwith new one 12mm and S&F PU foam cushion 40 Density with fabric as approved by GE etc, complete as per drg and as directed by EIC. |
| 51 | S&F Hard PVC shoes (white) as per sample as approved by GE etc, complete as per drg and as directed by EIC. |
| 52 | CHAIR STEEL TUBULAR WITH ARMS (FD-75(M)) |
| 53 | M&L for removal of unsv seat frame of chair steel tubularwith arms and S&F first class Hard wood seat frame duly polished glossy finish including cane work, fitting in position all as per drg etc, complete as per drg and as directed by EIC. |
| 54 | M&L for removal of unsv back frame of chair steeltubular with arms and S&F first class Hard wood back frame duly polishing with glossy finish including cane work, fitting in position all as per drg etc, complete as per drg and as directed by EIC. |
| 55 | Removing old broken/ unserviceable arms rest from chair steel tubular with arms and S&F PVC soft Arm rest etc, complete as per drg and as directed by EIC. |
| 56 | All as per item No 9.01 here-in-above, but Hard rubber shoes |
| 57 | All as per item No 9.01 here-in-above, but Rubber cap for conduit pipe as per drg |
| 58 | All as per item No 9.01 here-in-above, but MS flat clit of 25 x 3mm thick of length 75mm |
| 59 | M&L for Welding wherever requiredas per drg. etc, complete as per drg and as directed by EIC. |
| 60 | M&L preparation of surfaces by scraping with sand paper grinding machine/ paint remover and M&L for painting with two coat of synthetic enamel paint to steel frame by spray machine over a coat of red oxide primer etc, complete as per drg and as directed by EIC.. |
| 61 | CHAIR STEEL TUBULAR WITHOUT ARMS (FD-75(M)) |
| 62 | M& L for removal of unsv seat frame of chair steel tubularwithout arms and S&F first class Hard wood seat frame duly polished with high glossy finish including cane work, fitting in position all as per drg etc, complete all as specified and directed. |
| 63 | M&L for removal of unsv back frame of chair steeltubular without arms and S&F first class Hard wood back frame duly polished with high glossy finish including cane work, fitting in position all as per drgetc, complete all as specified and directed. |
| 64 | All as per item No 10.01 here-in-above, but Hard rubber shoes |
| 65 | All as per item No 10.01 here-in-above, but Rubber cap for conduit pipe |
| 66 | All as per item No 10.01 here-in-above, but MS flat clit of 25 x 3mm thick of length 75mm |
| 67 | S&F Welding wherever required as per drg. etc, complete all as specified and directed. |
| 68 | M&L for preparation of raw surfaces by scraping with sand paper/ grinding machine/ paint remover and M&L for painting with two coat of synthetic enamel paint to steel frame by spray machinecomplete over a coat of red oxide primer etc, complete as specified and directed . |
| 69 | M&L for Looking mirror of size 5\" x1.5\" x 8 mm thickduly beveled all around the edge and fixing with 08 Nos pre-drilled hole with spacers as per sample held with BSO yard etc, complete as specified and directed . |
| 70 | S&F of coloured Glass 12 mm thick( size 1800 x 900mm) duly beveled all around the edge for Table Exexutive and side unit bothetc, complete as specified and directed . |
| 71 | Note for wooden itmes:-Scrapping/Grinding will be carried out as directed by GE/EIC, M&L for polyurethane polish with Italien finish (high glossy finish) after removing of existing polish making surface smooth by sanding and grinding with standard workmanshipas directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda whereverrequiredbefore polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/painting will be as directed by GE/Engr-in-Charge. |
| 72 | Chair Easy(FD-229) |
| 73 | Almirah Mess Utensil (FD-93 (M)) |
| 74 | Almirah Wooden (any type) (FD- 4116/4042) |
| 75 | Chair dining long back (FD-357) |
| 76 | Chair easy cushioned (FD-358) |
| 77 | HAT STAND WITH MIRROR (FD-233) |
| 78 | Sofa set 5 Seater (FD-373/281) |
| 79 | Chair Dining officer (FD/MAP-11/04) |
| 80 | Table dining 6/8 person (FD-30/239/273) |
| 81 | Sofa set 4 seater(FD-373/281) |
| 82 | Table peg (FD-226/277/384) |
| 83 | Table center (FD-274) |
| 84 | Teapoy (FD-278) |
| 85 | Chair dining CB (FD-228/279) |
| 86 | Table dressing ladies (FD-251/FD/MAP-II/07) |
| 87 | Bin linen multipurpose (FD/E6/MAP/09) |
| 88 | Side board (FD-371/FD-1112) |
| 89 | Table writing (FD-249/275) |
| 90 | Table 3\" x 2\" with drawer (FD-284) |
| 91 | Bed hard (FD-246) |
| 92 | Chair writing (FD-280) |
| 93 | NOTE:-(i)-The contract sum shall be arrived at after duducting amount of schedule of \"Credit\" from the Total quoted amount |
| 94 | Note for all items:- (i) All items in BOQ are for \"Materials and labour / Supply and fix\" and to be executed in \"Repairs/Replacement unless otherwise specifically mentioned as \"Supply only\" or Fixing only\" in BOQ Bidders are required to quote their rates accordingly.(ii) The contract sum shall be arrived at after duducting amount of schedule of \"Credit\" from the Total quoted amount(iii) Makes of materials will be approved by GE in writing before commencement of work.(iv)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 41 to 43 of tender document. |
