Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm eachcomplete all as specified and as directed. |
| 2 | Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each complete all as specified and as directed. |
| 3 | Taking down wooden shutters of size not exceeding 1.0sqm complete all as specified and as directed. |
| 4 | Taking down wooden shutters of size exceeding 1.0sqm but not exceeding 2.0sqm complete all as specified and as directed. |
| 5 | Taking down wooden shutters of size not exceeding 1.0sqm and refixing in same opening after minor repairs, easing and adjusting complete all as specified and as directed. |
| 6 | Taking down wooden shutters of size exceeding 1.0sqm but not exceeding 2.0sqm and refixingin same opening after minor repairs, easing and adjusting complete all as specified and as directed. |
| 7 | S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 8 | S & F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening, sizes of sections and other details as specified in SSR Part – II, Section 8, Clause 8B.3.1 complete all as specified and as directed. |
| 9 | Supply and fixfactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top andbottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fittedin the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification 8B.2.1 of MES schedule Part-II and drawings as shown in SSRcomplete all as specified and as directed. |
| 10 | S & F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates includinghinges (100/50mm stainless steel),lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified. |
| 11 | S & F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one or more rebates includinghinges (100/50mm stainless steel),lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified. |
| 12 | M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in back filling of steel frame and holdfasts, etc. including necessary formwork complete all as specified and as directed. |
| 13 | S & F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified. |
| 14 | S & F Steel windows with side hung shutters including box type hinges with steel handles, 100mm long peg stay complete with glazing bars, dovetailed or welded, including locking arrangements complete all as specified directed. |
| 15 | S & F Steel windows with side hung shutters including box type hinges with steel handles, 100mm long peg stay complete without glazing bars, dovetailed or welded, including locking arrangements complete all as specified directed. |
| 16 | Supply & Fixing 30mm thick, Second Class Hard Wood, Glazed and Skeleton ventilator/window Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [b] and fitted to Chowkats complete all as specified and as directed. |
| 17 | Supply and fixing for 35mm thick second class hardwood plain framed panelled shutters (any numbers of panels) with panels of timber flat both sides (feather edged) or of veneered particle board medium dencity, wood particle with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed. |
| 18 | Supply and fixing 35 mm thick, 2nd class hard wood glazed and skeleton door shutters open rebated and prepared to receive glass, guage etc (without sash bars ), edge of framing plain chemfered ro rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR Part I section 8 clasue 8.24(a) complete all as specified and as directed. |
| 19 | S & F Factory made, 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 20 | Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with Particle Board Core, 28 to 30mm thick [Stiles], with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm plain colour PVC sheet on back face, termite proof, water proof and fire resistant, supplying & fixing in frame at site as per specification & drawing shown on Serial Page No. 181 of MES Schedule Part - II complete all as specified and as directed. |
| 21 | S & F Factory made wire gauzedPVC moulded door shutter 30 mm thick (style) panel will be of wire gauze in lieu of single side prelaminated sheetpanel. The wire gauze shall be wrapped on an additional sqaure 8mm MS solid tube and this tube shall be welded to MS tubes the the wire gauze shall be stretched and tightened firmlyconsisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelaminated colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles &at site as per clause 8 B.2.1 & 8 B.2.7 of MES schedule Part-II complete all as specified. |
| 22 | S&F cupboard shutter made of 1.00mm thick MS sheet fabricated with edges bend to shape including suitable to single rebate pressed steel frame of 1.25mm thick MS sheet of profile 105x60mm with stainless steel hinges, standard rim locking arrangement, handles of suitable size including all necessary fittings drilling hold fast/lugs with two coat synthetic enemal paint over one coat of red oxide primer finish as approved colour complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | S & FPowder coated aluminium (minimum thickness of powder coating 50 micron) for shutters and frames of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as per architectural drawings and as per the directions of Engineer-in-charge. |
| 24 | M & L for 12 mm thick Medium density fibre board exterior grade, prelaminated on bothside with decorative choice lamination & otherside balancing white lamination complete all as specified and as directed. |
| 25 | Supply and fixing 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 26 | Supply and fixing in repairs 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 27 | Supply and fixing 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 28 | Supply and fixing in repairs 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 29 | Supply and fixing 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 30 | Supply and fixing 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 31 | Supply and fixing in repairs of 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 32 | Supply and fixing 150 mm long aluminium handles cast type anodised complete all as specified and as directed. |
| 33 | Supply and fixing in repairs 150 mm long aluminium handles cast type anodised complete all as specified and as directed. |
| 34 | Supply and fixing 125 mm long aluminium handles cast type anodised complete all as specified and as directed. |
| 35 | Supply and fixing in repairs of 125 mm long aluminium handles cast type anodised complete all as specified and as directed. |
| 36 | Supply and fixing 100 mm long aluminium handles cast type anodised complete all as specified and as directed. |
| 37 | Supply and fixing 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed. |
| 38 | Supply and fixing 100 mm size cold rolled mild steel butt hinges medium weight complete all as specified and as directed. |
| 39 | Supply and fixing 75 mm size stainless steel butt hinges medium weight complete all as specified and as directed. |
| 40 | Supply and fixing double action spring hinges, mild steel with steel wire spring, stove enamelled, black, size of spring hinge 150mm complete all as specified and as directed. |
| 41 | Supply & Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mmcomplete all as specified and as directed. |
| 42 | Supply & Fixing in repair of Door closer hydraulically regulated, designation No. 3, universal type, aluminium (extracted body) suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 43 | Supply & Fixing in repair ofStainless steel wire cloth 0.36mm nominal dia of wire as in repair and average width of aperture 1.40 mmcomplete all as specified and as directed. |
| 44 | Supply & Fixing 3.00 mm thick sheet glass ordinary quality and glazing with oil putty square nexc 0.5 sqm in each panecomplete all as specified and as directed. |
| 45 | Supply & Fixing 4.00 mm thick sheet glass ordinary quality and glazing with oil putty square nexc 0.5 sqm in each panecomplete all as specified and as directed. |
| 46 | Supply & Fixing 4.00 mm thick sheet glass ordinary quality and glazing with oil putty square exc 0.5 sqm in each pane complete all as specified and as directed. |
| 47 | Supply & Fixing 3.00 mm thick sheet glass ordinary quality and glazing with oil putty including hacking out old broken glass (any thickness, size quality or description) from wooden frame or stone,concrete or brick surrounds, glazed with putty or fixed with beads complete of size n exc 0.5 sqm in each pane completeall as specified and directed. |
| 48 | Supply & Fixing Door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed to door with over all length of cover plate of 150mm with rubber bush completeall as specified and as directed. |
| 49 | S&F in repair Mortice lock, vertical type size 100mm, of brass 04 levers vertical type completeall as specified and as directed. |
| 50 | Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position complete all as specified and as directed. |
| 51 | Material and labour for Timber framed and fixed wrought sawn 2nd class hard-wood in scantling fixed complete all as specified and as directed. |
| 52 | Material and labour for Timber framed and fixed clean sawn 2nd class hard-wood in scantling fixed complete all as specified and as directed. |
| 53 | Dismantling boarding any description fixed in any position with nails complete all as specified and as directed. |
| 54 | Supply and fixing second class hard wood 50 mm thick boarding, clean sawn, fixed with nails in any position (except flooring and skirting) planed one side with butt joints complete all as specified and as directed. |
| 55 | Supply and fixing second class hard wood 20 mm thick boarding, clean sawn, fixed with nails in any position (except flooring and skirting) planed one side with butt joints complete all as specified and as directed. |
| 56 | M & Lfor 18mm / 19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame work as completeall as specified and as directed. |
| 57 | Dismantling of timber fillets rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position in unframed workcompleteall as specified and as directed. |
| 58 | M & L for 2nd class hardwood fillets square, rectangular or triangular in section clean sawn screwed with nails, cross sectional area exceeding 6 Sq.cm and not exceeding 13 Sq.cm complete all as specified and as directed. |
| 59 | M & L for 2nd class hardwood fillets square, rectangular or tringular in section clean sawn screwed with nails, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm complete all as specified and as directed. |
| 60 | M & L for 2nd class hardwood fillets square, rectangular or tringular in section wrought screwed with nails, cross sectional area exceeding 6 Sq.cm and not exceeding 13 Sq.cm complete all as specified and as directed. |
| 61 | M & L for 2nd class hardwood fillets square, rectangular or tringular in section wrought screwed with nails, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm complete all as specified and as directed. |
| 62 | Dismantling wall and ceiling boards (AC, fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets, framework etc. complete all as specified and as directed. |
| 63 | Material and labour for 4 mm thick Asbestos cement plain building boards, fixed to timber framework with screws complete all as specified and as directed. |
| 64 | Supply and fixing in repairs 2nd Class hard wood plain, cover fillets, square, rectangular or triangular in section, bull nosed, splayed, chamfered or chamfered or rounded on one edge or face wrought, secured with screws, cross sectional area exceeding 6 Sq.cm and not exceeding 13 Sq.cm complete all as specified and as directed. |
| 65 | Material and labour for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and as directed. |
| 66 | M & L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm and ceiling board of 4mm thick High Pressure steam Cured Non Asbestos Fiber Cement plain Board (E-Board)in a grid of GI system duly suspended with 6mmdia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed. |
| 67 | Providing & fixing with semi perforated 12mm thick micro tegular edge GRG false ceiling tiles at all heights with GRG (Glass Fibre With Semi With fullyReinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per manufacturer\"s specifications, drawing and as per directions of the Engineer-in-Charge. |
| 68 | Supply & fixing fully perforated 12mm thick micro tegular edge or 10 mm thick square edged GRG false ceiling tiles at all heights with GRG (Glass Fibre With Semi With fullyReinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T section of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wallpartition with the help of plastic rawl plugs at 450mm center to center and 41mm long dry wall wood screws. The work shall be carried out as per manufacturer\"s specifications, drawings and as per directions of the Engineer-in-Charge. |
| 69 | S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed. |
| 70 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 71 | Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 72 | Material & Labour for joint free non-skid ceramic coloured tiles7 to 8 mm thick (square/rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 73 | Material & Labour for joint free non-skid ceramic coloured tiles7 to 8 mm thick (square/rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in skirting/dado etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directedNote: The colour / shade / design of tiles shall be as approved by GE. |
| 74 | Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 75 | Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directedNote: The colour / shade / design of tiles shall be as approved by GE. |
| 76 | Material & Labour for joint free non-skid ceramic coloured tiles7 to 8 mm thick (square/rectangular) of premium quality, area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 77 | Material & Labour for joint free non-skid ceramic coloured tiles7 to 8 mm thick (square/rectangular) of premium quality, area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in skirting/dado etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directedNote: The colour / shade / design of tiles shall be as approved by GE. |
| 78 | Material & Labour for joint free glazed ceramic coloured tiles 450 x 300 x 7 mm thick of premium quality as in skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 79 | Material and labour pre polished, precast Chequered cement concrete tiles of size 250mmx250mm of 25mm thick as in floors set , jointed & pointed with neat cement slurrywith white cement and pigmentincluding15 mm thick screed bedor bedding layer incementmortar (1:4) complete all as specified and as directed. |
| 80 | M&L for 7-8mm thick Non skid ceramic paver tilesarea of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set, jointed &pointed with white cement and pigment over and including 15mm thick screed bedding layer in cement mortar (1:4) over brushing with neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed. |
| 81 | Material & Labour for Granite Stone Slabs of 18-20 mm thick as in Steps, Jambs, Pillars, Window Cills, Cooking Platform etc. and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and jointed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of the Granite Slabsincluding screed bed of 20 mm thick in Cement Mortar 1:4 and taking off old damaged slab and disposing off complete all as specified and as directed. |
| 82 | Dismantling asbestos cement (corrugated/semi corrugated) in roof coverings, etc including ridges, claddings, etc. and disposing offincluding all necessary staging / scaffolding, etc. as required complete all as specified and as directed. |
| 83 | Dismantling plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding, etc.including all necessary staging / scaffolding, etc. as required complete all as specified and as directed. |
| 84 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. |
| 85 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. |
| 86 | Supply and fixing Galvanised, corrugated mild steel sheeting of 0.63mm thick with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed. |
| 87 | Fixing only Galvanised, corrugated mild steel sheeting of 0.63mm thick with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. complete all as specified and as directed.Note: Serviceable Sheets obtained from dismantling of Sheets vide serial item No 80 shall be reused as fixing only. |
| 88 | Supply and fixing plain galvanised mild steel sheeting of 0.63mm thick in ridges, hips, valley gutters, drips and straight flashings with grade of zinc coating 275 complete all as specified and as directed. . |
| 89 | Dismantling mild steel work or wrought iron of any description and in any position complete all as specified and as directed. |
| 90 | Supply and fixing mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made slidingbolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 completeall as specified and directed. |
| 91 | Supply and fixing steel work in tubular trusses i.e truss bottom, top bend, sides, side supports, holding plates, posts and base plate etc. including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 etc complete all as specified and as directed . |
| 92 | Supply and fixing rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde E-250) quality- Bcomplete all as specified andas directed. |
| 93 | S & F Mild Steel framed work conforming to Fe - 290, Grade E-165, as inGrills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed. |
| 94 | Supply and fixing in repairs chromium plated Curtain Rod of 25 mm dia including PVC rings @ 100 mm centre to centre, side brackets end knobs of size suitable to 25mm dia curtain rod fixingSS screws and rawl plugs complete all as specified and as directed. |
| 95 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. |
| 96 | Demolition of cement concrete (unreinforced) in any position not otherwise specifically provided for and removal of rubbish from the site complete all as specified and as directed. |
| 97 | Material and labour for 40 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as levelling course on roof top or similar work finished fair & even complete all as specified and as directed. |
| 98 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thickin cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cementincluding mixing of water proofing compound @ 3% by weight of cement of approved make as per manufacturers instructions for levelling the surface smooth to receive the water proofing membrane, applying one coat of hot paving bitumen of penetrationvalue 85/25 conforming to IS 73 @ 1.20 kg/sqm over a coat of bitumenous primer @ 0.40 ltrs per sqm and applying a layers of APP based polymeric membrane, 3mm thick (minimum) weight 3.50 Kg/sqm reinforced with polyster non woven fabric (weighing not less than 100 gms/sqm) shall be applied overBitumenious primer (Application of polymeric memberane shall be by torch application, over laps shall be minimum 75mm in the transverse direction & 100 mm in the longtudinaldirection) polymeric membrane shall be taken to a depth of 65 cm (minimum) and then inserted inside the groove of parapet wall ( Cont..) |
| 99 | and shall be finished by membrane flashing, coved fillet in PCC (1:2:4) type B-0 of radius 75 mmshall be provided at the junction of roof & other vertical surfaces& surfaces shall be painted with hot paving bitumen of penetrationvalue 85/25 conforming to IS 73 @ 1.20 kg/sqm & applying two coats of aluminium paint over the APP modified membrane @ 0.11 kg/sqm including taking down existing Roof Treatment of any description and removing rubbish to a distance not exceeding 50 M complete all as specified and as directed. Note: (i) Water proofing compound will be measured and paid separately. |
| 100 | Taking down water tank including ball valve assembly and refixingthe same after Cleaning and removing all scales, dirt, deposited sediments from HDPE Tank of capacity exceeding 500 Litres but not exceeding 1000 litres, from mouths of circulating pipes of water tanks using wire brushes and other means and washing internal surfaces, cleaning with fresh water mixed with bleaching powder including draining of water through drain pipe line complete all as specified and as directed |
| 101 | Material and labour 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate as insub base flooring finishing even and rough including necessary formwork complete all as specified and directed. |
| 102 | Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed. |
| 103 | Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channel and like etccompleteall as specified and as directed. |
| 104 | Materials and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.completeall as specified and as directed.Note: Inner girth shall only be measured. |
| 105 | Add or deduct for each 25 mm girth or part thereof over or under 30cm (for adjustment in girth of item No.102 Above) |
| 106 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 107 | Material and labour forbrick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 108 | Materials and labour for half brick thick brick work with sub class \"B\" bricks straight or curved on plan to any radius built in cement mortar(1:4) including 2 Nos of 6mm dia bars at every fourth course of brick work complete all as specified and as directed. |
| 109 | Taking up or down 15mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 110 | Taking up or down 20mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 111 | Supplying and laying GI tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed. |
| 112 | Supplying and laying GI tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed. |
| 113 | Refixing of 15mm dia old serviceable GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls/ laid on floors including testing complete all as specified and as directed.Note: Old serviceable GI tube obtained from taking down vide item No 107 shall be reused. |
| 114 | Refixing of 20mm dia old serviceable GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls/ laid on floors including testing complete all as specified and as directed.Note: Old serviceable GI tube obtained from taking down vide item No 108 shall be reused. |
| 115 | M&L for Cutting chases, pinning in brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm in girth complete all as specified and as directed. |
| 116 | Supply and fixing in repair Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe [Minimum Weight 20mm - 210 Grams] complete all as specified and as directed. |
| 117 | Supply and fix Ball Valves, 25 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe [Minimum Weight 25mm - 455 Grams] complete all as specified and directed . |
| 118 | Supply and fixing in repair of 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engr-in-Charge. |
| 119 | Supply and fixing in repair of Stainless steel kitchen sink with drainage board, made of stainless steel sheet of 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe overall size 915mm x 460mm and bowl size 410mm x 330mmx 160mm depth complete all as specified and as directed . |
| 120 | Supply and fixing in repair of stainless steel (conforming to AISI-304 grade) plate rack of overall size 775mm x 600mm x 250mm or equivalent made of 1mm thick stainless steel sheetfixed on wall with 4 Nos, 50mm long screws & PVC rawl plug complete all as specified and as directed |
| 121 | Supply & Fixing in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand complete all as specified and as directed. |
| 122 | Supply and fixing in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and \"P\" or \"S\" trap including making good the disturbed floor complete all as specified and as directed. |
| 123 | Supply and fixing in repairof Vitreous China urinals, bowl type urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, supply & fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed. |
| 124 | Supply and fixing in repairs Vitreous China squatting pan of‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and integral foot rests, any pattern complete including provision of PCC bedding andconnection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed. |
| 125 | Supply and fixing in repairs of looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and as directed. |
| 126 | Supply & Fixing in repairs of 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of lowor high density of PVC, 32mm dia and union etc. including brackets and connections to pipe complete all as specified and as directed. |
| 127 | Supply and fixing in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and directed. |
| 128 | Supply and fixing inrepair pillar taps 15mm dia bore fancy typewith capstain heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified directed. |
| 129 | Supply and fixing in repairs 15mm bore angular stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 130 | Supply and fixing in repair of PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 131 | Supply and fixing in repairs 32 mm dia and 800mm long PVC flexible corrugated waste pipe for wash basin/sink complete all as specified and as directed. |
| 132 | Supply and fixing in repairs 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified and as directed. |
| 133 | Supply and fixing in repairs of Bib tap of PTMT, fancy type, any colour, high pressure screwed for iron pipe and fixed (Minimum weight 15mm-105gms) complete all as specified and as directed. |
| 134 | Supply and fixing in repairs Pillar tap of PTMT, fancy type, any colour, high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) complete all as specified and as directed. |
| 135 | Supply and fixing in repairs toilet paper holder recessed type vitreous China complete all as specified and as directed. |
| 136 | Supply and fixing in repairs Soap Dish, Stainless steel of approximate size 110 mm with brass screwscomplete all as specified and as directed. |
| 137 | Supply and fixing in repair tubular towel rail of 20mm dia ‘D’ type 60cm long between flanges of aluminium anodised, including brackets complete all as specified and as directed. |
| 138 | Supply and fixing in repair basin mixer, 15mm dia,cast copper alloy, chromium plated for mixing Hot and Cold water screwed down for iron pipe and fixed completeall as specified and as directed. |
| 139 | Supply and fixing in repair Wall mixer, 15mm dia,cast copper alloy, chromium plated for mixing Hot and Cold water screwed down for iron pipe and fixed completeall as specified and as directed. |
| 140 | Supply and fixing in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long including fixing arrangementcomplete all as specified and as directed. |
| 141 | Supply and fixing in repair of Corner Glass Shelf assembly 250mm radius, made with 12mm thick acrylic glass with CP railing, fixed with brackets complete all as specified and as directed. |
| 142 | S & F in repairsVitreous China Single Piece Wash Down Water Closet [Pedestal Pattern], of White Colour, Rimless Single Piece with UF Soft Close Seat Cover, Tornado Flushing, Hinges, Fixing Accessories and Accessories Set, Cistern Fittings, S Trap-300 mm, complete all as specified and as directed. |
| 143 | Supply and fixing in repair of wash hand basin, vitreous China, white, counter top type, of size 560x460mm, oval shaped of approved design, with waste coupling and including PVC connection 60cm long, key with brass union complete all as specified and as directed. |
| 144 | Supply and fixing in repair ofplastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 145 | Supply and fixing in repairof Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 146 | Dismantling rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed. |
| 147 | Supply and fixing 110 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls / laid in floor/ in trenches complete all as specified and as directed. |
| 148 | Supply and fixing 75 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls / laid in floor/ in trenches complete all as specified and as directed. |
| 149 | Supply and fixing in repair of 100 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 150 | Supply and fixing in repair of 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 151 | Supply and fixing in repair of 110 mm bore PVC [SWR] Branch Piece, Single [Single \"T\"] equal or unequal including jointing with solvent cement complete all as specified and as directed. |
| 152 | Supply and fixing in repair 110 mm to 75mmbore PVC (SWR) reducers complete all as specified and directed. |
| 153 | Supply and fixing in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 154 | Supply and fixing in repair 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 155 | Supply and fixing in repair of PVC [SWR] Floor Trap with grating including jointing with solvent cement, 75mm dia of outlet complete all as specified and as directed. |
| 156 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathingcomplete all as specified and as directed. |
| 157 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on other side of lathing surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 158 | Material and labour for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on on one side of lathing surfaces including mixing water proofing compound @3% by weight of cement in top coat and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compoundwill be measured and paid separately. |
| 159 | Material and labour for GI wire netting 0.71mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed. |
| 160 | Taking down cement or cement/lime plaster,any description on brick or stone walls etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed. |
| 161 | Material and labour for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound @3% by weight of cement in top coat and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compoundwill be measured and paid separately. |
| 162 | M & L for rendering 5mm thick in cement mortar (1:3) on fair faces of concrete surfaces of soffits of slabs, ceilings etc. surface finished fair and even without using extra cement complete all as specified and as directed. |
| 163 | M & L for rendering 10mm thick in cement mortar (1:6) on other than fair surfaces of PCC block / brick masonry wall / concretesurfaces etc. surface finished fair and even without using extra cement complete all as specified and as directed. |
| 164 | Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) completeall as specified and as directed. |
| 165 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similarsuspended work complete all as specified and as directed. |
| 166 | M & L for reinforced cement concrete1:1.5:3(using 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 167 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surface of concrete complete all as specified and as directed. |
| 168 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 169 | Material & Labour for prepration of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed. |
| 170 | Material & Labour for prepration of new or priviously untreated wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 171 | Material & Labour for preparation of new or previously untreated wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and as directed. |
| 172 | Material and labour for preparation of new or previously untreated wall surfaces and applying two coats of Cement based Paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 173 | Material and labour for complete removal of existing treatment and washing, rubbing down and stopping of old painted surfaces and applying two coats of oil bound distemper (white or tinted) over a coat of primer on wall complete all as specified and as directed. |
| 174 | Material and labour for complete removal of existing treatment and washing, rubbing down and stopping of old painted surfaces and applyingtwo coats ofcement based paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 175 | Material and labour for complete removal of existing treatment and washing, rubbing down and stopping of old painted surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 176 | Material and labour for preparation of plastered surfaces and applying one coat (1mm thick) of wall care putty to make the surface even and smoothcomplete all as specified and as directed. |
| 177 | Material and labour for preparation of new wood or wood base surfaces to receive painting over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primercomplete all as specified and as directed. |
| 178 | Material and labour for preparation of new wood or wood base surface of any description n exe 10cm width or girth and applying two coats of synthetic enameled paint over one coat of pink primer complete all as specified and as directed. |
| 179 | Material and labour for preparation of new steel surfaces to receive painting over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primercomplete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
