|
| 1 | Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n.exc. 1.5sqm each Complete all as specified and as directed by Engineer-In-Charge.. |
| 2 | Taking down shutters only n.exc. 1.5sqm each Complete all as specified and as directed by Engineer-In-Charge.. |
| 3 | Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50sqm and n exc 4sqm each Complete all as specified and as directed by Engineer-In-Charge.. |
| 4 | Taking down shutters only exc 1.50sqm and n exc 4sqm each Complete all as specified and as directed by Engineer-In-Charge.. |
| 5 | S & F Solid PVC door frame of size 50 mm x 47 mm made out of 10 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing compete all as specified as directed by Engineer -in -charge |
| 6 | S & F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick(stiles), with 2, 4, or 6 raised paneldesign 2mm thickPrelam PVC sheet on the front face and 2mm thick Plain colour PVC sheet on back face with particle Board core compete all as specified as directed by Engineer -in -charge |
| 7 | S & F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as spd as directed |
| 8 | S&F for 40 mm thick factory madeflush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . |
| 9 | S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge.(Note :- S & F Glass/gauge shall be measured and paid for separately) |
| 10 | M & L for powder coated aluminium sliding window with anodized aluminium frame of3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters(02 glass and 01 Wirecloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00mm thick and Aluminum alloy wirecloth 4mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified as directed by Engineer -in -charge. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost. |
| 11 | M & L for providing Aluminiium shutter with Powder coated frame 88.9mmx47.63mmx1.60 mm thick fixed with heavy duty aluminium hinge of size 125mm and size of shutter with top rail , middle rail and bottom rail and style of size85 mm x 44.5 mm x 1.56 mm thickwith200 mm size powder coated2 nos with each leaf , Heavy duty powder coated aluminium tower bolt 150mm long 2 Nos per leaf, 3 nos Heavy duty aluminium powder coated of size 125mm with each leafincluding 12 mm thick both side prelaminated particle board / 5.5 mm thick glass panein the both panel with necessary joining cleats, rubber packing, aluminium beading, screws etc complete all as specified and as directed by Engineer-In-Charge. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost. |
| 12 | S & F aluminium powder coatedpartitionswith aluminium anodizedframe of size 90mm x 44mm x 1.6 mm thick fixed with screws including panels of any 18/19mm thick decorative both side prelaminated perticle board inretior grade upto ht 1.80 mtr abovetinted glass panels 5.5mm thick ofht 0.90 mtr , with necessary, jointing cleats, glazing clips, rubber packing, aluminiumbeading, screws etc complete. all as specified and directed. |
| 13 | S&F in rapair 4 lever brass mortise lock vertical type, size 100mm for aluminium door with 3 nos of keys complete. all as specified and directed. |
| 14 | Dismantling of Existing Aluminium door/window upto 4 sqm each compete all as specified as directed by Engineer -in -charge |
| 15 | S & F150 mm aluminium anodised barrel tower bolts of extruded section,ISI marked compete all as specified as directed by Engineer -in -charge |
| 16 | S & F 150 mmextruded aluminium alloy handles , fabricated type, anodised, ISI marked compete all as specified as directed by Engineer -in -charge |
| 17 | S & F 100 mm MS butt hinges medium weight cold rolled mild steel compete all as specified as directed by Engineer -in -charge |
| 18 | S & F 300 mm longand Mild steel Chromium plated sliding door bolts, plate type,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed compete all as specified as directed by Engineer -in -charge |
| 19 | S & F mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed by Engineer -in -charge ( work shall be carried out in MD Qtrs/ OTM accns in different locations of AOR GE east Bareilly as per site requirements upto 4 storieyed building) |
| 20 | S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti.compete all as specified as directed by Engineer -in -charge |
| 21 | M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces.compete all as specified as directed by Engineer -in -charge |
| 22 | Dismanteling ofstone slab and tiles of any description or thickness in floors, wall all as directed.Complete all as specified and as directed by Engineer-In-Charge |
| 23 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish. Complete all as specified and as directed by Engineer-In-Charge |
| 24 | M & L for 75mm thick Cement Concrete type B0 (1:4:8) using 40 mmgraded stone aggregate as in sub base of floor complete. all as specified and directed. |
| 25 | M & L for 25 mm thick Cement Concrete type B 1 (1:2:4) using 20 mmgraded stone aggregate as in sub bases, sub floors . Complete all as specified and as directed by Engineer-In-Charge |
| 26 | M & L for vetrified ceramic tiles 8-10 mm thick square of size n exc 0.36 sqm andIncluding 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 27 | Ditto all as per item No 26 but in Vertical surfaces size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4 complete. all as specified and directed. |
| 28 | M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15 mm thick screed bed of cement mortar 1;6 set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed by Engineer-In-Charge.. |
| 29 | Ditto all as per item No 28 but in Vertical surfaces size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4 complete. all as specified and directed. |
| 30 | M & L for colouredglazed ceramic tiles (300 mm x450mm/300mmx600mm) & 7 mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer/ backing coat in CM 1:4 complete and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-In-Charge. |
| 31 | M & L for coloured Non skid ceramic tiles 300 mm x300mm x 7 mm thick in floors etc., laid over 15 mm thick screed bed of cement mortar 1;6 set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed by Engineer-In-Charge.. |
| 32 | M&L for 75mm thick PCC 1:11/2:3 , B1(20mm graded aggregate) as in flooring complete all as specified and as directed by Engineer-In-Charge. |
| 33 | M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gared A complete. all as specified and directed. |
| 34 | Supply and spreading sand under floors or in foundationincluding watering and consolidation complete. all as specified and directed. |
| 35 | M & L for Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape ,size and colour confirming to IS 15658-2006of 80 mm thickness, M-40 Grade, all as specified and directedEngr-in-Charge. |
| 36 | Demolition of reinforcement cement Concrete in slab, kitchen platform and other similar suspended workpavings n exc 15 cm thickness complete. all as specified and directed. |
| 37 | M&L for reinforced cement concrete type B1 (1;2;4)nominal mix using 20 mm graded broken stone aggregate as inslabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like. complete. all as specified and directed. |
| 38 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed by Engineer-In-Charge. |
| 39 | S&F mild steel TMT bar of 10 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia. |
| 40 | M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado including 10 mm thick rendering of CM 1:4and jointed with grey cement slurry, and pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing complete. Complete all as specified and as directed by Engineer-In-Charge |
| 41 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in -Charge. |
| 42 | M&L 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed |
| 43 | Demolition cement concrete of any description and in any position not otherwise specifically provided for complete. all as specified and directed. |
| 44 | M & L for cement concrete type C2 (1:3:6) (40 mm graded broken stone aggregate)75 mm thick as in plinth protection and finish even and fair all as directed by Engr in Charge |
| 45 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A complete. all as specified and directed. |
| 46 | Dismantling Asbestos cement /FRP sheet/GI sheet(corrugated ted, semi corrugated, etc.) sheets in roof coverings up to height 8mtrall as specified and directed by Engr in Charge |
| 47 | M & L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm TCT thick of any colour approved by GEhaving tensile strength of 550Mpa as in roof covering / cladding to wall , fixed with 5 Nos. self tapping screws on each sheet /each support rubber lining and filling of gap with cement mortarin CM 1:4 with wall and sheetup to 6 mtr height . complete all as specified and as directed by Engineer-In-Charge. |
| 48 | Ditto as item no 47 but in ridges of plain sheet and minimun girth 750mm complete. all as specified and directed. |
| 49 | S & F for 6 mm thick Fiber cement, (corrugated or semi corrugated) sheets in roofs, walls, fixed with L-type or J-type hook or cranked bolts completeall as specified and directed. |
| 50 | Dismantling timber scanteling 40 sqcm unframed and over section in any position.complete. all as specified and directed. |
| 51 | S&F steel work in rolled section design as approved, purlins, rafter, posts, gusset plates cleats, wind tiesetc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 116-1979 grade (medium grade) complete. all as specified and directed. |
| 52 | S&F in repairsgun metal, globe or gate valve, bore dia of pipe in 15 mm, complete. all as specified and directed. |
| 53 | S&F in repairs metal, globe or gate valve, bore dia of pipe in 20 mm, complete. all as specified and directed. |
| 54 | Taking down steel tubing of 15 mm dia bore and connections from walls and cellings or laid in floor including cleaning for refixing in same position (walls , ceiling, floors etc). complete. all as specified and directed. |
| 55 | ditto All as item No. 54but 20 mm bore complete. all as specified and directed. |
| 56 | S& F in repair for20 mm dia CPVC pipe as on wall , floor , ceiling , concealedetc complete and as directed by Engr in chargewith all fittings and fixtured , jonting solution of ISI mark includingmaking grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed. |
| 57 | S& F in repair for25 mm dia CPVC pipe as on wall , floor , ceiling , concealedetc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark includingmaking grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed |
| 58 | S & F in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixedComplete all as specified and as directed by Engineer-In-Charge. |
| 59 | S&Fin RepairCast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both endsor high pressure with Capstan head . Including dismanteling and making good the tiles if required of make Prayag/Marc/Seiko,Complete all as specified and as directed by Engineer-In-Charge. |
| 60 | S&F in Repairbib taps of bore size 15mm, cast copper alloy, , chromium plated,fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferruleIncluding dismanteling and making good the tiles if requiredComplete all as specified and as directed by Engineer-In-Charge. |
| 61 | S & F in Repair brass cromium plated conceled stop cock of bore size 15 mm, in position conceledin walls/ceilingsor floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces Including dismanteling and making good the tiles if requiredcompleteall as specified and as directed by Engineer-In-Charge |
| 62 | Supply and fixing in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm longwith connecting rod suitable for 15mm bore pipe .Complete all as specified and directed by Engineer-in-charge. |
| 63 | S&Fin RepairPVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge. |
| 64 | S/F in repair Toilet paper holder chromium plated fixed with CP screws of complete. all as specified and directed. |
| 65 | S & Fin Repair viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting . completeall as specified and as directed by Engineer-In-Charge |
| 66 | S & F in repairs vitreous china wash down water closetpedestal pattern(EWC) white excluding flushing cistern & Inclwhite seat coverclosed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device andflush pipe.Complete all as specified and directed by Engineer-in-charge. |
| 67 | S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etcComplete all as specified and as directed by Engineer-In-Charge. |
| 68 | S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe.Completed all as specified and directed by Engineer-in-charge. |
| 69 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed . |
| 70 | S & F in repairs CP health faucet special (1.5 mtr tube) with hook for EWCcomplete all as specified and directed by Engineer in charge |
| 71 | S&F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges completeall as specified and as directed by Engineer-In-Charge |
| 72 | S & F in repairs soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge. |
| 73 | S & F for PVC (SWR) pipes, bore of pipe in 110mm, single socketed, in any length, with rubber ring joints, laidin floors or fixed to wallsComplete all as specified and as directed by Engineer-In-Charge. |
| 74 | S&FPVC (SWR)pipe single socketed in any length with rubber ring joints,laid in floors 75mm dia Complete all as specified and as directed by Engineer-In-Charge. |
| 75 | Supply and fixing in repairsLow density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of40 mm dia borefor wash hand basin Complete all as specified and directed by Engineer-in-charge. |
| 76 | S&F in repairsPVC(SWR)branch pieces, single (Single Y) equal or unequal or with parallel branches 75mm dia Complete all as specified and as directed by Engineer-In-Charge. |
| 77 | S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 75mm with cement solvent in position .Complete all as specified and as directed by Engineer-In-Charge. |
| 78 | S & F in Repairfor PVC (SWR) bends, any radius, bore of pipe in 110mm with cement solvent in position Complete all as specified and as directed by Engineer-In-Charge. |
| 79 | Dismantling of PVC Pipes of any dia complete. all as specified and directed. |
| 80 | Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted andfixed in position complete andall as specified and as directed by Engineer-in-Charge |
| 81 | Supply and fixing in repair 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted andfixed in position complete andall as specified and as directed by Engineer-in-Charge. |
| 82 | S & Fin Repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washersComplete all as specified and as directed by Engineer-In-Charge. |
| 83 | S & F in repair PVC floor trap with CP grating weight of grating not less than 35 grams joints to waste pipe in run lead joint dia of outlet 75 mm of floor, trap with deep water seal and of heavy weight coated with tar/black bitumen paint including making good with existing surfaceby provision of tiles and refilling of the dismantel mnaterials complete all as specified and directed by Engineer-in-charge. |
| 84 | Supply and fixingin repair 3 mm thick figuredglass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square exc. 0.5 Sqm each.with hacking out of old glasses Complete all as specified and directed by Engineer-in-charge. |
| 85 | S & F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane for steel/ aluminium windows with hacking out of old glasses compete all as specified as directed by Engineer -in -charge |
| 86 | S & F in repairs GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tracks or wooden beeding patti.to gauge door/window shutters and wooden windows compete all as specified as directed by Engineer -in -charge |
| 87 | Supply and fixing in repairs Aluminium wire cloth power woven 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for Aluminium window and ventilator . Complete all as specified and directed by Engineer-in-charge. |
| 88 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified anddirected by Engineer-in-Charge. |
| 89 | M&L for preparing newly plastered walls surfaces and applying two coats ofoil bound distemper over1mm thickwall care puttycomplete all as specified and directed. |
| 90 | M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coatoverone coat primercomplete all as specified and directed. |
| 91 | M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 92 | S&F 5mm thick 5mm thick Prelem PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining/Ceiling and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. complete all as specified |
| 93 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed |
| 94 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 95 | Dismantling wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete. all as specified and directed. |
| 96 | Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600/3000 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 3/4 mm dia G.I. wire from purlins/soffit. 4mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Ceiling tile Oceanic/Diamond textured (Density>1200 Kg/m3, Modulus of Rupture(M.O.R)-10 MPa, Thermal Conductivity(K)-0.02 W/mK) of size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336:1993, (Reaction to fire-A2-s1-d0) tested as per EN13501 Part-I & BS-476 Part 4,5,6&7, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of engineer-in-charge. |
| 97 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceilingroses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing allretrieved materials toMES storesfor segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all asspecified and as directed by the Engineer-in-Charge. |
| 98 | M&L concealed point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through &including PVC Conduit (Concealed in wall/ceiling) of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings, junction boxe, covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, suitable for fixing of Modular type switches / sockets etc, complete all as specified and directed for the following :- |
| 99 | All as per item No 98 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge. |
| 100 | All as per item No 98 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge. |
| 101 | All as per Item No 98 One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size |
| 102 | All as per serial item No 98 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge. |
| 103 | S&F Modular Switch 1 way 16 Amps, 1 Module size complete all as directed.. |
| 104 | S&F Modular Socket 6 A, 2/3, Pin 2 Module size complete all as directed.. |
| 105 | S&F Modular Socket 6A/16 A, 5 Pin ,2 Module size complete all as directed.. |
| 106 | S&F Modular Switch 1 way 6 Amps, 1 Module size complete all as directed.. |
| 107 | Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 108 | Supply and fixing angular lamp holder, metal cased body of brass with back plate inbatten fittings, including Plastic square box of required size complete all as specified and directed by the Engineer-in-Charge |
| 109 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 110 | S&F in replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and incl 02 Nos. MS clamp made of MS flate iron of 50 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer, complete all as directed. |
| 111 | S&F in replacement LED street light luminaire of 25 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge. |
| 112 | Supply and fixing in replacement sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete complete all as specified andas directed by the Engr-in-Charge.. |
| 113 | Supply and fixing in replacement SPN 40 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 114 | Supply and fixing in replacement SP 5 to 32 amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 115 | M&L for sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 20 mm and aboveincl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed complete incl taking out old wiring and conduit |
| 116 | Earthing complete withgalvanized steel earth plate electrode 60 cmx 60 cm x 6 mm thick buried directlyin ground (earth pit notless than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level,connecting to theGalvanized ironearth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron andsteelearth wire protected by provision of GI lightgrade pipe15 mmbore including provision of concrete pitmade from PCC ( 1:2:4) type B-1 (using20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plateNo 3 of SSR 2020 Part-I and connecting toMCBDB’searth test point all as specified or indicated including testing on completion . |
| 117 | Supply and Fixingin repairsMCCB TP125 Amps, 415V, 16kA , 4 pole |
| 118 | S&F in replacement sheet metal enclosure DB\"s 415 Volts, IP-42, vertical suitable for mounting MCCB\"s, TPN,4 way with 200 Amps rated copper bus bar complete all as directed by Engineer-in-charge. |
| 119 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 core nominal cross section inservice connections |
