|
| 1 | Schedule \"A\" |
| 2 | Material & Labour for Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & Labour for hard-core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for 100mm thick plain cement concrete 1:4:8 type D-2, using 40mm graded stone aggregate, as in sub base to floors and paving, lean concrete to fdn etc., complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & Labour for Filling of dry Sand as in screed bed for PCC interlocking paver block including spreading levelling, and well ramming, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for machine pressed precast concrete interlocking paver block with grey cement and pigment of approved shape and size of 60mm thickness confirming to IS 15658-2006, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer chemical coating on top surface, over gray cement and pigment, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & Labour for Moorum/red bajri, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material & Labour for forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering ramming / rolling and finnishing to required size, shape, etc. not exceeding 1.5 Metre high from base, complete all as specified and directed by Engineer-in-Charge. |
| 9 | Excavation in trenches, not exceeding 1.5 Metre wide and not exceeding 1.5 Metre depth for foundation, etc., and getting out in soft/disintegrated rocks, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & Labour for Plain Cement Concrete Type D-2 1:4:8 (using 40mm graded granite stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & Labour for Pre-cast cement concrete block masonry type C-1, 1:3:6 (20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material & Labour for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 and even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for Providing reinforced cement concrete type B-l, 1:2:4 (20mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exceeding 100 sqcm but not exceeding 250 Sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops, complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply & Fixing Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290. Gde-E-165, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply & Fixing irons steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, not exceeding 5cm long, diameter of neck 5 to 10mm, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply only MS Galvanised chain link PVC coated fencing conforming to IS 2721: 2003, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material & Labour for preparation of new steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material & Labour for Precast 3 seater high quality Reinforced cement concrete (RCC) Bench with backrest rectangular in shape of sitting hieght upto 45 cm and overall length of 156 cm to be installed without armrest in park / garden area, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Removing Excavated soils not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge. |
| 23 | E/M Part |
| 24 | Supply, laying and testing of cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sqmm 4 core, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply, laying and testing of cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sqmm 2 core, complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply and Laying 32mm OD Double Wall Corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall for protection of underground Cable with all fittings, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & Fixing of LED Pathway not less than 35 W, (4000K) Pressure die cast aluminium housing with designed optics provide uniform light distribution to redefine outdoor and enhance architectural design, including fixing arrangements etc., complete all as specified and directed by Engineer-in-Charge. Make : Philips BGP300 LED40 757 PSU PC IN S1/ Wipro / Bajaj or its equivalent |
| 28 | Supply & Fixing Decorative lighting Galvanized pole 3 Metre height with gold colour painted decorative cast aluminium rings, base plate welded to pole with 4 Nos of mounting holes, integral connector block for loop in loop out flushed in bottom section of pole including foundation with installation pole, complete all as specified and directed by Engineer-in-Charge.Make: Bajaj /Wipro /equivalentNote: The cost of foundation is deemed to be included in quoted rate. |
| 29 | Supply & Fixing in two run of PVC insulated 2.5 sqmm copper single core conductor cable between cable loops box to fitting drawn through the pole, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply and fixing sheet metal enclosure for Single pole and neutral DBs when MCBs to be used 8 way 230 V double door with 200 Amps bus bar, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Material & Labour for street light timer switch, 110-240 Vac (50/60 HZ), complete all as specified and directed by Engineer-in-Charge. Cat No: 67Dt0 Make: Legrand/Schneider/Hager/L&T |
| 32 | Material & Labour for MCB Single pole & neutral 230 Volts 32 Amps, 10 KA \"C\" curves, complete all as specified and directed by Engineer-in-Charge.Make: Legrand/Schneider/Hager |
| 33 | Material & Labour for MCB triple pole & neutral 415 VoltsAmps, 10 KA \"C\" curve, complete all as specified and directed by Engineer-in-Charge.Make: Legrand/Schneider/Hager |
