|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 2 | Cement mortar 1:6(1 cement : 6 coarse sand) |
| 3 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 4 | 110 mm diameter |
| 5 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. Bend 87.5° |
| 6 | 110 mm bend |
| 7 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion Shoe (Plain) |
| 8 | 110 mm Shoe |
| 9 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 10 | 110 mm |
| 11 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 12 | 1:6(1 cement: 6 coarse sand) |
| 13 | Demolishingbrickcoba/work manually bymechanicalmeansincluding stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 14 | In mud mortar |
| 15 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 16 | Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. |
| 17 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 18 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 19 | With common burnt clay F.P.S. (non modular) bricks |
| 20 | Grading roof for water proofing treatment with |
| 21 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 22 | Surface Cleaning & crack filling with two coats mixed with cement in ration 1:1.5 (1 ltr SBR latex : 1.5kg cement) of width 150mm of required length and 10mm depth and appropriate thickness etc. as per direction of engineer -in-charge. |
| 23 | Finishing the surface with 20mm thick jointless cement mortor 1:4 (1 cement: 4 coarse sand) in ratio admixture with water proofing compound conforming to IS code: 2645 and approved by Er-In-Charge including laying glass fiber of approved quality on top layer of plaster and finished the surface with trowel with heat cement slurry making pattern of 300mm X 300mm square 3mm deep and also to give required slope and treating the similer the adjoining wall upto 300mm height, including rounding the junction wall and slab. |
| 24 | Providing and applying two or more coat of high performance polymer modified cementenous coating with 45 GSM glass fiber mesh rainforcement with the help ofbrush, rolar & spray. After diluction of powder componant to the liquid pllymer to make smooth and homogenics serface etc. completes as direction of engineer -in-charge. |
| 25 | Providing and applying one self primer coat with water in ratio 2:1, 0.45 to 0.50 liter per squaremeter per coat) and three or more undiluted coat of high performance solar reflective water proof coatingfor roof of 1.0 to 1.1 liters per square meter per coat , including 45 GSM glass fiber mesh with a size of 2.5mm X 2.5mm with the help of brush, rollar & spray to make the surface heat insulated and leakproof etc. complete as per direction by engineer - in - charge. |
