|
| 1 | LIGHT FITTINGS |
| 2 | Supply, installation, testing and commissioning of ≥20W (4 feet )High efficient LED batten surface/wall mounted Specially designed Co-extruded channel in thermally conductive material with plastic with HET diffuser. In-built electronic driver duly wired up to terminal block.IP20, CRI >80, Temperature range-0 to 50DegC, Driver efficiency>85%, Power factor>0.9, CCT - 6500K, THD<20%, Surge protection 2kV, 50000 burning hours as per L70 Criteria, Multistage Isolated Constant Current operated driver with range 150-270V AC andSafety Extra Low Voltage Safe level<60V DC as per IEC standard.Luminaire lumen ≥ 2000 lumens (≥ 100 lm/W) |
| 3 | Supply, installation, testing and commissioning of Integral, SMD LED, IP40, 40W (4 feet) Surface/Suspended Mounted LED Batten with System efficacy of more than ≥100 lm/W (≥4000 lumens). LED luminaire shall have sleek designwith Extruded Aluminum Section. The luminaire shall have High Optically Efficient Polycarbonate Diffuser for Uniform illumination and wider light distribution. Screwless Design ensures ease of maintenance. LM 80-08 compliant LEDs from reputed makes such as Nichia, Japan / Cree, USA / Bridgelux, USA / Citizen Japan should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 |
| 4 | Supply, installation, testing and commissioning of Integral, SMD 2x2 Backlit LED Panel, IP 20, 36W LED recessed mounted fixture with system efficacy of minimum >100lm/W and system lumen output of minimum 3600lm, operating in ambient temperature of 0⁰C to 45⁰C at 50Hz frequency. Luminaire shall have CRCA housing coated in white (RAL9016) with translucent HET diffuser for uniform illumination and wider light distribution. LEDs used in the product shall comply with IEC 62471. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. The LED shall comply with L70 life of 50000 burning hours tested at maximum current. The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 4KV internal surge protection, Power factor of minimum 0.95 and total harmonic distortion (THD) of less than or equal to 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 |
| 5 | Supply, installation, testing and commissioning of Integral, SMD LED, IP 65, ≥80 W LED Surface/Suspend Mounted Round Mid-Bay / High-Bay fixture with System efficacy of more than≥130 lm/W ( ≥10500 lumens). Luminaire shall be made up of Die Cast Aluminium Housing. Luminaire shall have PC lens with polycarbonate reflector for Uniform illumination and wider light distribution. The innovative design with Aeroflo Technology ensures flow of free air through the Housing and keep the heat away from Electrical Components. LM 80-08 compliant LEDs from reputed makes such as Nichia, Japan / Cree, USA / Bridgelux, USA / Lumiled USA / Citizen Japan should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall use SMD type LED. The LED shall be compliant with LM80-08 standard with Useful L70B50 life of 100000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 70. LED Driver shall be CRCA constructed, Isolated type, multistage Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 4 KV internal surge protection, Power factor greater than 0.9 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. |
| 6 | Supply, installation, testing and commissioning of Integral, SMD LED, IP 65, 150 W LED Surface/Suspend Mounted Round Mid-Bay / High-Bay fixture with System efficacy of more than≥135 lm/W (≥20250 lumens). Luminaire shall be made up of Die Cast Aluminium Housing. Luminaire shall have PC lens with polycarbonate reflector for Uniform illumination and wider light distribution. The innovative design with Aeroflo Technology ensures flow of free air through the Housing and keep the heat away from Electrical Components. LM 80-08 compliant LEDs from reputed makes such as Nichia, Japan / Cree, USA / Bridgelux, USA / Lumiled USA / Citizen Japan should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall use SMD type LED. The LED shall be compliant with LM80-08 standard with Useful L70B50 life of 100000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 70. LED Driver shall be CRCA constructed, Isolated type, multistage Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 4 KV internal surge protection, Power factor greater than 0.9 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. |
| 7 | Supply, installation, testing and commissioning of 70W ±10% LED Street Light luminaire, IP66, IK08 with System efficacy of more than 115 lm/W. LED Street Light shall be made up of Die Cast aluminium housing in square shape. Luminaire shall have two separate compartments for LEDs and driver, both hermitically sealed to achieve IP66 ingress protection. Optical compartment shall withstand IK08 impact rating, while control gear shall have die cast aluminium cover for safety. LM 80-08 compliant LEDs from reputed makes such as Nichia Japan / Cree USA / Lumiled USA / Citizen Japan / Osram Germany / Seoul Korea / Bridgelux USA should be provided. LEDs used shall comply with EN 62471 for Photo-biological safety (Risk Group 2 maximum) with certificate from manufacturer. Luminaire manufacturer shall provide certificate of association with LED manufacturer for minimum 5 years. LEDs shall have maximum junction temperature of 125°C with actual operating junction temperature not exceeding 90°C at 35°C ambient. Optical grade PC lens with individual lenses for each LED shall provide street light distribution for uniform lighting. LED optical lenses shall be properly fixed to MCPCB (not only by glue), with temperature withstand capacity >85°C and transmissivity >90%. LEDs shall comply with LM80-08 standard with Useful L70 life of 50,000 Hrs tested at maximum current and 105°C case temperature (complete LM80 test report for 10,000 hrs testing required). LEDs shall have CCT of 5700K and minimum CRI of 70. LED Driver shall be BIS registered, multistage isolated type POTTED Constant Current topology with proper heat sink, suitable for 150-300V input (nominal 240V), 6kV internal surge protection (Common & Differential Mode), Power Factor >0.95, THD <10%, and integral output short circuit & overvoltage protection.. |
| 8 | Supply, installation, testing and commissioning of 15W, High efficient recess mounted LED round downlighter withwhite powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light. CRI>80, IP40 housing, IP20 Driver Ambient temp-0 to 45DegC, CCT - 4000/5700K, 50,000 hrs @ L70 life.Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection-2.5 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 100-265V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard.Luminaire lumen ≥ 1500 lm. (100 lm/W) - Cutout Dia-ø145mm |
| 9 | Supply installation, commissioning of 2\" LED batten (Mirror light) with Co-extruded polycarbonate housing and mounded end caps. The system wattage shall be 12W with system lumens of1200 lumens and system efficacy of100 lm / W. LED make:that satisfies IEC62471 Photobiological/RoHS Standards with and LED Efficacy of > 150lm/W,Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI > 80, Life of LED as per L70 > 20000burning hours, Ambient temp-0 to 35DegC, Driver efficiency>85%, THD<30%, Power factor>0.9. |
| 10 | Supply, installation, testing of SMD 30W LED Streetlight fixture with System efficacy of≥120 lm/W ( ≥3600 lumens). Luminaire shall be made up of die cast Aluminium housing with PC lens and ploycarbonate diffuser. Luminaire shall be designed with street optic LENS for uniform light distribution. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP66 and IK10protection. The LED shall be compliant with LM80-08 standard with L70 life of 1,00,000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 70. LED Driver shall be potted, Integrated type, Multistage, Isolated, APFC Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage < 60V DC as per IEC standard., Driver Efficiency > 85% & 5KV internal and 10KV external surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. |
| 11 | Dismantling of existing light fittings using mechanical means or physical means without disturbing the overall structure of proposed area. All items dismantled and shall be made a checklist for returning back to concerned Authorities. All items shall be verified by Electrical Engineer (HBL) before handing over. If any working product is damaged during transit, the same shall be replaced without any additional claim. |
