|
| 1 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 5 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 7 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge. |
| 8 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finishedsmooth. |
| 9 | White Agaria Marble Stone |
| 10 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : |
| 11 | 250x16 mm |
| 12 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 13 | 150x10 mm |
| 14 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 15 | 100 mm |
| 16 | Providing and fixing to existing door frames. |
| 17 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. |
| 18 | Taking out damaged W.C. pan, urinal, wash basin with C.C. including cleaning of all area by sweeping with phenol, acid and disposal of un-serviceable material within 50 M lead. |
| 19 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 20 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 21 | Arranging welding machine for welding of Broken steel componants such as Handels, fastners, hinges, grills, etc.as and where required as per the direction of Engineer-in-Charge. (rate includes labour & transportation of machine at site). |
| 22 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 24 | Bend 87.5° |
| 25 | 110 mm bend |
| 26 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 27 | 110 mm |
| 28 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 29 | 1:6 (1 cement: 6 fine sand) |
| 30 | 12 mm cement plaster of mix : |
| 31 | 1:6 (1 cement: 6 coarse sand) |
| 32 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). |
| 33 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. |
| 34 | New work (Two or more coats applied @ 1.43 litre/10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 36 | Two or more coats on new work. |
| 37 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 38 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 39 | Two coats. |
| 40 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 41 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 42 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 43 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 44 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 45 | Re-lettering with black Japan paint of approved brand and manufacture. |
| 46 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. |
| 47 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 48 | Repairs to door / windows shutter (Area upto3 sqm) including taking out and refixing the same and replacement of hinges with screws wherever required etc complete |
| 49 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 50 | Orissa pattern W.C Pan of size 580x440 mm |
| 51 | Providing anf Fixing Red sand stone over manholes and gully trap wherever required as per direction of Engineer incharge. |
| 52 | 45 to50mm mm thick |
| 53 | Grading roof for water proofing treatment with |
| 54 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 55 | Dismantling old damaged urinal basins including disconnecting the connections and disposal of rubbish to the dumping ground as directed. |
| 56 | Cleaning of ceramic tile flooring / dado by rubbing with scrubbers, using mild acid and detergent powder complete as directed. |
| 57 | Uprooting of undesired grown-up plants over walls at any floor level and filling the hole after uprooting of plants root with cement mortar 1 : 2(1 cement:2 fine sand) including making arragement for jhula, ladders, rops etc. complete asper direction of Engineer-in- charge. |
| 58 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 59 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 60 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 61 | Of area 3 sq. metres and below |
| 62 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : |
| 63 | Thickness above 40 mm up to 75 mm |
| 64 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 65 | Credit for: |
| 66 | Low level PVC flush tanks (10 litres) |
| 67 | Credit of old wooden door shutters of area 3 Sqm or below, recovered from dismantling of partition/door shutters. |
| 68 | Credit to the work un-serviceable material recovered from dismantling/demolishing work: |
| 69 | a)Brass/CP brass bib cock, stop cock and other brass material. |
| 70 | b) Old rusted (unserviceable) G.I./C.I. pipes & fittings and M.S. sections/pipes etc. |
| 71 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 72 | 10 litre capacity - White |
| 73 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 74 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 75 | Flat back wash basin of size 550x400 mm. |
| 76 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 77 | Semi rigid pipe |
| 78 | 32 mm dia |
| 79 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 80 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 81 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\" BSP thread and shapes, weighing not less than 60 gms. |
| 82 | Providing and fixing PTMT urinal cock of approved quality and colour. |
| 83 | 15 mm nominal bore, 80 mm long. 42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms. |
| 84 | De-sludge or pumping out the septic water and Cleaning of Septic tank by revoing of sludge from septic tank or pumping out by mechanical means i/c disposal of sludge from outside the compound at authorized municipal dump or out side of the township all complete as per direction of En-in-charge. |
| 85 | Providing and fixing PPR Unions |
| 86 | PPR Union 20 mm |
| 87 | PPR Union 25 mm |
| 88 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
| 89 | 20 mm dia. nominal bore |
| 90 | 25 mm dia. nominal bore |
| 91 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work |
| 92 | 40 mm dia. nominal bore |
| 93 | Providing and fixing CPVC gate valves of approved brand and manufacture for CPVC pipe lines. |
| 94 | 20mm size |
| 95 | 25mm dia |
| 96 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 97 | 20 mm nominal bore |
| 98 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 99 | 45 cm length |
| 100 | 15 mm nominal bore |
| 101 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 102 | 20 mm nominal bore. |
| 103 | 25 mm nominal bore. |
| 104 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 105 | Circular tank |
| 106 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 107 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 108 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 109 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 110 | Providing and fixing PTMT grating of approved quality and colour. |
| 111 | Rectangular type with openable circular lid. |
| 112 | 150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 113 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 114 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 115 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 116 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 117 | 20mm nominal bore. Weighing not less than 40 gms. |
| 118 | 25mm nominal bore. Weighing not less than 62 gms. |
| 119 | Replacement of old damaged polyethelene cover for water storage tank by providing and fixing polyethelene cover for water storage tank with P.V.C. bolts and nuts and locking arrangement all complete as directed by the Engineer -in -charge. |
| 120 | Periodic cleaning of polyethylene water storage tank of capacity upto 1500 litres situated on roof of the building upto floor five level including removing silt all foreign material from the tank etc all complete. |
| 121 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 122 | For pipes 100 to 250 mm diameter |
| 123 | Providing and fixing brass gate valve with handle lever of approved quality. |
| 124 | a) 20 mm nomonal bore. |
| 125 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. |
| 126 | Cleaning of all manhole/chambers of all sizes in the compound, complete removal of earth, silt slush,brick bats, garbages and other refuses, disposing off the same to the dumping site in township complete as per the direction of the Engineer-in-Charge. (Sweeping cleaning |
| 127 | of manholes/chamber shall be done once in a three month normally but the frequency may be changed as per site requirement). |
| 128 | Note:Rates includes the cost of cleaning |
| 129 | of manhole/chamber,dewatering, if required including removing of manhole/chamber cover and keeping the same back in position after cleaning etc complete. (Payment will be made for each cleaning of manhole. |
| 130 | Cleaning of chocked water supply GI pipe line by pressure machine for proper supply of water i/c opening and refixing of bends, socket etc whichever necessary all complete as per direction of Engineer-in-Charge. |
| 131 | Cleaning and de-silting of chocked WC Seat, trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all complete as per the direction of Engineer-in-charge. |
| 132 | Providing and fixing CPVC, MTA / FTA (metal )/Adapter of Supreme or equivalent approved make in CPVC pipe including jointing with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. |
| 133 | Size 20X20 mm |
| 134 | Providing and fixing covers for PVC water storage tanks with necessary MS / PVC clamps |
| 135 | For 500 litres capacity tanks |
| 136 | Providing and fixing in position VMD heavy duty manhole cover with frame of required shape, size and approved quality. |
| 137 | 460 X 460 mm |
| 138 | 300 X 300 mm |
| 139 | Dismantling and refixing the PVC tank from terrace in all rwespect. |
