|
| 1 | Provision for taking out of Schist slab floor from the pathway stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer- incharge in All kinds of soil |
| 4 | Provision for providing and laying sand stone slab flooring 100 mm thick with 1:6 CM bedding and 1:2 CM pointing with all smooth surface by fine dressing including all leads & lifts etc complete |
| 5 | Provision for Random rubble masonry work with hard stone in superstructure above plinth level and upto floor five level with Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6(1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for :Columns, piers, abutments, pillars, posts and struts |
| 11 | Provision for providing 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) on wall where repair work is required as directed be Engineer Incharge |
| 12 | Provision for racking out old dead, damaged lime plaster of the Temple with slopes, verticals , Pocket & statues with the help of Wooden hammer, coir brush including cleaning the surface of the top of the temple for lime concrete work and disposal of debris from out side the temple Complex including all material and labour as per direction of Engineer In-charge |
| 13 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 14 | Provision for Providing and fitting of RO Water purifier of reputed brand like Kent or equivalent 100LPH for drinking water facility for visitors |
| 15 | Provision for Providing and fixing of water Cooler of reputed brand of Blue star or equivalent for drinking water facility for visitor as public amenity |
| 16 | Provision for fixing the sand stone flooring by using 100mm new stones duly smooth dressed and with fine joints as per original including with 1:2 CM pointing including all leads & lifts etc complete .(Along the drain for covering) |
| 17 | Provision for providing of sitting benches etc(providing and fixing of red sand stone benches having 4legs of size 0.26 x 0.26 x 0.45 m with simple molding and 8cm thick red sand stone top soze 1.50 x 0.60m as per design and matching to the existing pattern at the site etc. |
| 18 | Provision for providing furniture and necessary electrical and recreational fittings and fixtures for baby care room as directed by engineer incharge etc., |
| 19 | Provision for purchase and installation at site of readymade dustbins of Red sand stone of cylindrical shape in single block having top molding and depression as per design on extra surface fully open top outer top dia 580mm and height 750mm of required shape and design including Supply of All Materials, Labour and T&P etc. |
