|
| 1 | Surface dressing n exc 15 cm deep in soft/loose soil, complete all as specified and directed. |
| 2 | Excavation in trenches for n.exc 1.50m wide not exceeding 10 Sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting out all as sfd, complete all as specified and directed. |
| 3 | M&Lfor PCC 1:4:8 type D2graded stone aggregate cement concrete in flooring, foundation, filling and mass, complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 5 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m, complete all as specified and directed. |
| 6 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 7 | M&L for type B1 (1:2:4) 20mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 8 | M&L for type B1 (1:2:4) 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 9 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter, complete all as specified and directed. |
| 10 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed. |
| 11 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 12 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed. |
| 13 | M&L for Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified and directed. |
| 14 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 15 | Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 16 | M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 17 | M&L for rendering 5mm thick in CM 1:3 finish even and smooth without using extra cement in ceiling, complete allspecified and directed. |
| 18 | M&L for rendering 15mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4, all as specified and directed. |
| 19 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 20 | M&L for preparation of new plastered ceiling surface and applying three coat of white wash of ceiling, complete all as specified and directed. |
| 21 | M&L for preparation of new plastered surfaces of wall and applying two coats distemper over a coat of primer birla white wall care putty on wall to obtain smooth finish, completeall as specified and directed. |
| 22 | All as per item No21.00above but two coat fo weather proof paint(Exterior emulsion paint) in camouflage pattern over onecoat wall putty of minimum 1.5 mm thick using Mechanical means (two or more combination). design, pattern and colour shall be as approved by GE or as per existing, complete all as specified and directed. |
| 23 | M&L for Non skid ceramic jointless coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6), complete all as specified and directed. |
| 24 | M&L for glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed. |
| 25 | M & L cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 75 mm thick ,in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair ontop without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays, complete all as specified and directed. |
| 26 | S&F ofSteel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specified and directed. |
| 27 | S&F of solid PVC door frame of size 50x47mm made out of 5mm PVC sheet reinforced with MS square tube all as specified and directed including making good to the surfaces, complete all as specified and directed. |
| 28 | S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter, as required & directed by the Engr-in-Charge. |
| 29 | S&Fof 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm each pane, complete all as specified and as directed. |
| 30 | S & F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part I, complete all as specified anddirected. |
| 31 | S & F of Rotational moulded polyethylene water storage tanks cover(cylindrical vertical with closed top)fixed in position, complete all as specified and directed. |
| 32 | S&F of Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms)of bore of pipe 15mm, complete all as specified and as directed. |
| 33 | Supply and fixing of 15 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc,complete all as specified and directed. |
| 34 | Supply and fixing of 20 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc, complete all as specified and directed. |
| 35 | S&F in repair health faucet (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. as in repairs, complete all as specified and as directed. |
| 36 | S&F in repair brass Chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union as in repairs, complete all as specified anddirected. |
| 37 | S&F of Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with \"P\" or \"S\" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately. |
| 38 | S&F of PVC valve less, syphonic action type, white low level flushing cisternof capacity 10 litre with inlet ball valvefloat and handle including brackets and 32 mm dia PVC flush pipe, complete all as specifiedand directed. |
| 39 | S &F of Towel Rail 600mm long of aluminium fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 270 gms),complete all as specified and as directed. |
| 40 | S&F of grating doom 100mm dia of CP (Minimum weight 60 Gms),complete all as specified anddirected. |
| 41 | S &F of Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm, complete all as specified and as directed. |
| 42 | S &F of PVC connections 15mm size with PTMT nuts of length 450mm,complete all as specified and as directed. |
| 43 | S&Fof 15 mm Bib tap with wall flangechromium plated brass screwd foriron pipe with capstain head,complete all as specified anddirected. |
| 44 | S & F of Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed, complete all as specified and directed. |
| 45 | S&F of600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 46 | S&F of 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 47 | S&F of 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 48 | S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 49 | S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 50 | S&F of Vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe fixedcomplete all as specified and as directed.Note:-(a)Pillar taps and waste fittings as required shall be measured and paid for under supply only separately.(b) Supply and waste pipes as required shall be measured and paid for separately. |
| 51 | S&F of Aluminium, anodised barrel tower bolts of extruded section and fixed for 300 mm length, complete all as specified and directed. |
| 52 | S&F of 300mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed, complete all as specified and directed. |
| 53 | S&F of 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed. |
| 54 | S&F of Aluminium handles, 150mm fabricated type anodised, complete all as specified and directed. |
| 55 | M&L for rendering 10mm thick rendering in CM 1:4 over concrete surfaces of roof mixed 5% liquid water proofing compound by weight of cement or as per manufacturers instruction including surfaces finished even and fair without using extra cement,complete all as specified and directed.Note: Liquid water proofing compoundpaid seperately. |
| 56 | M&L for Liquid water proofing compound as per latest IS specification, complete all as specified and directed. |
| 57 | M&L for plain Cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in mass-concrete/foundation or floor, complete all as specified and directed. |
| 58 | M & L for chequered cement concrete with tiles of size 30cm x30cm x 25 mm and 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry and pointed with coloured cement to match, complete all as specified and directed. |
| 59 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beching and coping, bed block lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 60 | S&F of Pre-cast cement concrete type B-1 (1:2:4)(using 20mm graded aggregate) as in manhole/dranin cover slabs set in cement mortar 1:6 including necessary formwork, complete all as specified and directed. |
| 61 | S&F of DWC (double wall corrugated) HDPE pipes 150mm bore laid and jointed on concrete bed complete.Including testing all as specified and directed. |
| 62 | M&L for Concrete bed to drain pipe 150mm bore laid to falls including packing under & haunching against the sides of pipes after they are laid and tested, in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), complete all as specified and directed. |
| 63 | M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 150mm Dia complete all as specified and directed. (Note : Work in Foule Position), complete all as specified and directed. |
| 64 | Septic tank, for 10 users exc. In ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab covers incl RCC precast manhole cover having 6 mm plate embedded all sound/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc. complete for 10 users, complete all as specified and directed. |
| 65 | Soakage well excavation in ordinary soil foundation on PPC 1:3:6 walls of honeycombed and solid in M25 concreteincluding intercepting chambers, screen chambers, brick work in CM, RCC cover slab in M25 /RR masonry /filling with brick bats complete of size 1.2 mtr dia3 m deep including vent pipe. (25 users), complete all as specified and directed. |
| 66 | M&L for 100MM thick Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass-concrete/foundation or floor,complete all as specified and directed. |
| 67 | Extra for forming finished drain or channel 30cm inner grith in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc (inner grith only to be measured for payment), complete all as specified and directed. |
| 68 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI markedand including provision of 1.5 sqmm PVC insulated copper cable FRLSH as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches, socket outlet and fan regulators etc, complete all as specified and as directed for the followings:- |
| 69 | (a)One light/fan/bellpoint controlled by one switch single pole one way, complete all as specified and directed. |
| 70 | (b) All as per item No 68.01here-in-before butone3 pin 6 amp switch socket out let independent,complete all as specified and directed. |
| 71 | All as per item No 68.01 here-in-before but using 02 Nos. 2.5 sq mm size for main cable and 01 No.2.5 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board, complete all as specified and directed. |
| 72 | Supply and fix of switch modular flush 10A single pole one way ISI marked, complete all as specified and directed. |
| 73 | Supply and fix of modular sockets 10 Amp 2 in 1 2/3 pin combined, complete all as specified and directed. |
| 74 | Supply and fix of switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked, complete all as specified and directed. |
| 75 | Supply and fix of modular sockets 16Amp 2 in 1 3/5pin combined, complete all as specified and directed. |
| 76 | Supply and fix of ceiling rose surface bakelite 60x25mm three terminal, complete all as specified and directed. |
| 77 | Supply and fixing of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 78 | S&F LED batten extruded surface mountingfitting 2 feet long aluminium housing 10 wattinput voltage 220 volt inbuilt LED and driver, complete all as specified and directed. |
| 79 | Supply and fixingof Ventilating Fan250 mm sweep, 1250 RPM, non metallic resin body,single phase 240 volts AC 50 Hzand connecting up complete including louvers and provision of making holes and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan, completeall as specified and as directed. |
| 80 | S & F of LED light fitting 10 Watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 81 | supply and fix of connecting and testing LED street light 35 watt 6000k/3000k new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminium housing with high efficient led as lighting source and PC cover having toP opening seperate driver compartment with IP66 protection and impact resistance of IK07 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length, complete including taking down old light fitting. |
| 82 | Supply & fix of MCB DB SPN 4 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting, completeall as specified and directed. , |
| 83 | Supply and fix of MCB, single pole and neutral, 230 volts, 32 Amp rating, \"C\" series fixed in DBs catered here-in-before, complete all as specified and directed. |
| 84 | Supply and fix of MCB SP 6-32 Amps 240 volts 10 KA 50 HZ \"C\" curve, complete all as specified and directed by Engineer in Charge. |
| 85 | Material, labour jointing & testingXLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 core including making connection with suitable size of cable gland, aluminium lugs etc., complete all as specified and as directed. |
| 86 | Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning, complete all as specified and dierected. |
| 87 | Supplying, laying sub class \"B\" bricks old size with axis of the bricks perpendicularto the axis of the cable as in cable protection complete all as specified and directed. |
| 88 | Supply & Fixing in replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia, complete all as specified and directed. |
| 89 | M & L for Point wiring complete with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including casing caping of size not less than 20mm width with suitable gang box and wiring to be terminated in pressed stell sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable s in earth wire (green colour) connected to common earth dolly for one light point, complete all as specified and as directed. |
| 90 | Supply and fixing of wall mounted fan 400mm, 230 volts, 50Hz 1420 RPM with 90 degree oscillation and having speed control by two pull cord system, complete all as specified and as directed. |
| 91 | Supply and fixing of Ventilating Fan 200mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, provision of making hole for fixing of fan as reqd and copper cable 3 core of size 0.5 Sqmm for connection from ceiling rose to fan, complete all as specified and as directed. |
| 92 | Supply and fixing of Ventilating Fan 150mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, provision of making hole for fixing of fan as reqd and copper cable 3 core of size 0.5 Sqmm for connection from ceiling rose to fan, complete all as specified and as directed. |
| 93 | Supply and fixing of Exhaust Fan 300mm sweep (steel body) heavy duty, 1250 RPM, single phase 240 volts AC 50 Hz including louvers and for fixing of exhaust fan and copper cable 3 core of size 0.5 Sqmm for connection from ceiling rose to fan, complete all as specified and as directed. |
| 94 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
