|
| 1 | Earth work excavationby mechanical means(hydraulic excavator)/manual meansin over areas for levelling the surface/ area grading works etcin all types of soils and refilling the excavated earth in the low lying areas areas as directed (filling/compacting in layers of not more than 150 mm thick compacted layer, each layer well rammed using Power Roller, watered and consolidated) etc complete all as per drawings and specifications. |
| 2 | Earth work excavation by mechanical means(hydraulic excavator)/manual means in over areas, rafts, foundation, trenches, roads etcin all types of soils below ground level of all depths including shoring, strutting, bailing / pumping of water, leveling, ramming the bottom of excavation, refilling with selected excavated materials in the sides of the foundation in layers and refilling the areas as directed with the balance available excavated earth(filling/compacting in layers of not more than 150 mm thick compacted layer, each layer well rammed, watered and consolidated) etc complete all as per drawings and specifications. This item covers Excavation and Re-filling the entire Excavated Soil as per the areas directed by NPCIL. |
| 3 | Providing, laying, spreading and compacting graded stone aggregate (size range53 mm to 0.075 mm)to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher/manual means in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density for base course preparations, complete as per specifications with required labour etc and directions of Engineer-in-Charge,as per clause 406 of MORT & H specifications complete in all respects. |
| 4 | Providing and fillingwithManufactured/Crushedsandfrom approved sourcesand filling using required manpower/machineries, tools etc. The M.Sand/ Crushed sand shall be of coursed granulars with more angular grains in nature and to be suppied due approval from NPCIL. (Fine/dusty sands are not permitted) |
| 5 | Providing and fillingwithApproved Quality Country bricksfor Cricket Pitchas per drawingsand specifications including required manpower, tools etc. |
| 6 | Supply and placing in position Country Bricksedging on outer sides of the Ground by placing the bricks in 9\" as vertical as per design, refilling/leveling the side of the bricks with required soil etc complete as directed |
| 7 | Providing and constructing Random Rubble masonry in CM 1:6 using hard granite stones for foundation works including hammer dressing the stones, providing bond stones as per specifications ,raking out the joints, scaffolding, curing etc., complete as per specifications. |
| 8 | Providing and laying plain cement concrete 1:4:8 using 40 mm and down graded stone aggregateat all height including mechanical mixing, leveling, compaction, vibrating,finishing smooth the exposed surfaces of concrete, curing etc complete as per drawings and standard specifications. |
| 9 | Providing and laying plain cement concrete 1:2:4, using 20 mm and down graded stone aggregateat all height including mechanical mixing, leveling, compaction, vibrating, finishing smooth the exposed surfaces of concrete, curing etc complete as per drawings and standard specifications. |
| 10 | Providing and constructing cement concrete block masonryof minimum M5 grade conforming to IS-2185 of latest version , using solid blocks ofspecified sizein cement mortar 1:4 by volume,for walls in ground works includingracking out joints, curing etc complete as per specification |
| 11 | Plastering of external faces (using Crushed Sand/M.Sand) of brick work/concrete for ground wall area works in cement mortar 1:4, 20 mm thick, including scaffolding, curing, forming grooves, plaster bands, border, keystone etc wherever required allas per drawings and specifications |
| 12 | Providing and laying M20/M25Design mixconcrete with cement content up to 350kg/Cum using 20mm and down graded stone aggregates including Mixing ,Ramming, Compaction, leveling, curing, placing at all lifts, including scaffolding and Finishing smooth all exposed faces complete as per specification. |
| 13 | Providing ,placing in position and removing Form work for all insitu concrete works includingscaffolding etc., complete at all elevations as per drawing and specification (measurement for form work shall be the area of forms in contact with concrete surfaces) |
| 14 | Providing cutting ,bending placing and tying mild steel, high yield steel reinforcementin RCC works including providing spacer blocks in CM 1:2, binding wires etc.complete at all elevations as per drawings and specifications including dewatering wherever necessary etc complete as per drawings and specifications |
| 15 | Providing, fabricating and erection of Structural steel members made out of M.S. angles, flats, plates, pipes, channels, tubes, rods etc conforming to relevant ISetc., includingcost of welding, welding rods, drilling holes, bolts/nuts wherever required and providing and applying two or more coats of approved quality synthetic enamel paint over a coat ofzinc chromate yellow primer etc., as per drawings and specifications |
| 16 | Supply and Fixing in position approved quality Stainless Steel of Grade-312 for handrails/other areas as directedusing SS pipes/tubes/balls etc including chasing the walls/floor for Fixing in position and filling the area by cement concrete 1:2:4, finishing with cement plaster in CM 1:4 etc completeas per drawings and specifications |
| 17 | P roviding and Fixing roofing at all elevations using Zinc-A luminium alloy coated profile sheet of 0.45 mm thickness of TATA \"Durashine\"/JSW /Hindalco /Geo roof make of approved colour including all shapes, over laps, side cladding, ridges, eaves board, gutters etc., including supplying and fixing of necessary 6mm dia J or L, G I hooks, bolts, nuts, screws, bitumen washers, sealing of joints etc., complete all as per manufacturer\"s recommendationsincluding scaffolding as per drawings and specifications. (Note: Payment shall be made only to the superficial area. No over laps, corrugations /profile shall be measured) |
| 18 | Providing and Fixing roofing using multiwall Polycorbonate sheet roofing of 8mm thickness ofLexan/Everest Composites/Nimisha Impex/Anand Plastics/Shri Balaji Roofingmakes of approved colour and shade including all shapes, over laps, side cladding etc. Fixing with required screws, fishers etc including required tools,tackles, labour etc complete |
| 19 | Providing and applying two coats of First Quality synthetic enamel paint of Asian paints/ Lewis Berger/ICI Dulux/NIPPON/NEROLAC make of approved colourover a coat ofprimer on new wood / steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filler etc., including cost of filler primer, paint etc all completeas per drawings and specifications |
| 20 | Providing and applying Exterior Emulsion PaintApex of Asian paints/Weather cote of Lewis Berger /Weather shield of ICI Dulux/Sumo Xtra of Nippon/Nerolac make& shade in two or more coatsto give an even shadeas per manufacturer\"s instructions to the external plastered surfaces including preparation of surfaces, scaffolding etc. at all elevations, completeas per drawings and specifications |
| 21 | Providing and Fixing 20mm thick Exterior grade designer tilesof approved colour and design over 20mm thick base cement mortar 1:4 laid and pointed with white cement slurry mixed with pigments to match with the shade of the tileincluding rubbing, curing, in Staircases (both tread & riser), Walkway areas, Entrances etc.,as per drawings and specifications(Note:Minimum price of Tile shall be of Rs.45/Sq.ft-excluding GST) |
| 22 | Supplying and fixing in position 18mm thickColoured PVC integral foam sheet on the Structural steel framing for Screen wall purposes. The PVC Integral Foam shall be factory manufactured solid section of light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides. The sheet shall have density of 500 - 600 Kg/Cum, water absorption less than 1% and tensile strength greater than 11 MPa. PVC integral form sheet shall be of M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) or M/s Kemron Wood plast Pvt Ltd Or M/s ASIS India Pvt Ltd Integral PVC Form makes , jointing the same with required fixing arrangements with Structural steel membersetc., all complete as per specification and as directed by the Engineer-In-Charge. |
| 23 | Ceramic Tiles |
| 24 | Providing and Fixing in position ceramic unglazedfloor tiles of size 300 x 300 mm as specified below (thickness to be specified by the manufacturer) of premium quality confirming to IS-15622 of JOHNSON/ SOMANY/ REGENCY/NITCO/BELL/ KAJARIA/AGL/ CERA/ SIMPOLA /HSIL/VERMORA/BONZER7/PAVIT make, in all colours and shadeslaid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) with 3mm spacerand fixing with adequate cement slurry/paste, including pointing the joint with filler materials and matching colour pigment etc at all floors complete all as per drawings and specifications (Note: 1. Joint filler item will be paid under relevant item.2. Minimum price of Tile shall be of Rs.50/Sq.ft -excluding GST) |
| 25 | Providing and Fixing in positionceramic glazedwalltiles of size 300 x 450 mm (thickness to be specified by the manufacturer) of premium quality confirming to IS-15622 of JOHNSON/ SOMANY/ REGENCY/ NITCO/BELL/ KAJARIA/AGL/CERA/SIMPOLA/HSIL/ VERMORA/ BONZER7make laid on 20mm thick Cement Mortar 1:3(1 Cement : 3 Coarse Sand)and fixing with adequate cement slurry/paste in position on the wallincluding pointing the joint with white cement mixed withcolour pigment of matching shade complete at all floors, allas per drawings and specifications (Note:Minimum price of Tile shall be of Rs.60/Sq.ft -excluding GST) |
| 26 | Providing and applying Exterior Emulsion PaintApex of Asian paints/Weather cote of Lewis Berger /Weather shield of ICI Dulux/Sumo Xtra of Nippon/Nerolac make& shade in two or more coatsto give an even shadeas per manufacturer\"s instructions to the external plastered surfaces including preparation of surfaces, scaffolding etc. at all elevations, completeas per drawings and specifications |
| 27 | Providing and laying M40 grade 80 mm thick interlocking precast concrete pavers blocks as pr relevant IS of approved shape over a profiled layerto the required line, pattern etc., allas per drawings and specifications (Note:Minimum price of Tile shall be of Rs.44/Sq.ft-excluding GST) |
| 28 | Providing and laying20mm thick (+-2mm)polished Natural granite slab of approved colourJet Black,for platform/flooring/wall cladding and other surfaces as directedwith all exposed surfaces buffed,cuttingrequired shapes, making half/full round nosing, making holes for fixing utilitiesas required, set over a base of cement mortar 1:4, 20 mm thick neatly pointed with white cement and colouring pigmentsto match the shade of the stone as per the requirement, curing, rubbing, polishing, making pocket holes forfixing kitchen sink/wash basin /gas hose etc completeas per drawings and specifications. The rate inclusive of cutting the Granite for required shapes as per drawings and as directed |
| 29 | Providing and laying NP:2 grade RCC hume pipes with collars of 750mm dia of approved make as directed by NPCIL , joined with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing the joints etc complete. |
| 30 | Providing, casting, finishing, curing, hoisting and placing in position 50mm thick precast slabs in cement concrete 1:2:4 using 20mm down size stone aggregate excluding cost of reinforcement but including formwork all complete as per drawings and specifications (The rate shall be exclusive of reinforcement) |
| 31 | Providing and plantingapproved hedgesand maintaining the same for minimum twelve months in order to have a healthy growth (the end date of maintenance shall bethe date of completion of Defects liability perid)with the following activities: a)Providing best quality/healthy sapling of CLERODENDRUM INERME/ACHALPHYA RED & GREEN/Murraya exoctica & Jetropha/Pendanus/Spider lilly or any other plant approved by ENC required age suitable for plantation. b) Excavation in all type of soil for plantation of sizes 400mm dia & 400 mm deep and planting including preparation of the pit by filling with soil mixed with cowdung/farmyard manure.c)Minimum 3 Nos. of hedges should be provided per RM, d) Watering manually twice a weekfrom the nearby sources with required watering hozes etc and labour, materials, etc., as directed by the Engineer-in-charge. |
| 32 | Supplying and planting& healthy well grown plants-FOXTAIL PALM,/Rayal palm/Areca Palm-2500 MM Height maintaining the same for minimum twelve months in order to have a healthy growth (the end date of maintenance shall bethe date of completion of Defects liability perid) with required labour and watering the same etc complete |
| 33 | Providing lawn involves planting BERMUDA grass by dippling method and maintaining the same for twelve months in order to have a healthy growth (the end date of maintenance shall bethe date of completion of Defects liability perid) with the following activities a) providing best quality/ healthy grass suitable for lawn. b) Excavation in all type of soil for a depth of 150mm and filling with soil mixed with cow dung/farmyard manure @ 100kg/100 Sq. Meter for bed preparation .(c) Watering by operating sprinkler system Or manually required watering hoses includingcost of labourtools and tackles etc complete. |
| 34 | Providing and Fixing in position approved vitreous chinaware orissa pattern Water Closet 580 mm x 440 mm \"Hindware/Cera/Nycer/Parryware\" make with \"S\" or \"P\" trap with all jointing materials including excavation, making hole in masonry, reconstructing the same, encasing the pan and trap with brick jelly concrete 1:2:4 and finishing the same etc., completeas per drawings and specifications |
| 35 | Supply |
| 36 | Fixing |
| 37 | Providing and Fixing in position approved European type water closet of \"Hindware/Cera/Nycer/Parryware\" make comprising of a) Wash down EWC in white glazed vitreous chinaware with integral \"P\" of \"S\" trap with or without vent and jointing the trap with soil pipe in CM 1:1 b) Hindware/Cera/ Nycer/Parryware make PVC 10 liters capacity low level flushing cistern with all syphonic fittings.c) White solid plastic seat cover with CP pillar hinges and rubber buffers etc completeas per drawings and specifications |
| 38 | Supply |
| 39 | Fixing |
| 40 | Providing and fixing PVC flushing cistern of 10 litres capacity \"Hindware/Cera/ Nycer/Parryware\" make with all syphonic fittings, including assembling the cistern components and flush pipe, testing etc., Complete all as per specifications etc complete as per drawings and specifications. |
| 41 | Supply |
| 42 | Fixing |
| 43 | Providing and Fixing in position best quality vitreouschinaware hand wash basin of 550x400mmsize white colour of Hindware/Cera/Nycer/Parryware/Prayag/Johnson/Somany make and Fixing with Rug bolt of approved size and makeas per drawings and specifications |
| 44 | Supply |
| 45 | Fixing |
| 46 | Providing and fixing PTMT symet waste coupling -32mm dia half threaded for wash basinof Prayag/Polytuf/Wavin Vectus/King pipes/Polo India/Plasto make with rubber plug ball chain with necessary check nut as per drawings and specifications. |
| 47 | Supply |
| 48 | Fixing |
| 49 | Providing and Fixing heavy quality PTMTbottle trap as per IS-9763 of Prayag/Polytuf/Wavin Vectus/King pipes/Polo India/Plasto make of self cleaning design for wash basin. - 32 mm nominal bore |
| 50 | Supply |
| 51 | Fixing |
| 52 | Providing and Fixing 15 mm size heavy quality CP brass pillar cock easy clean type as per relevant ISfor wash basin with capstan head Adson/Cera/Parrywaremake as per drawings and specifications |
| 53 | Supply |
| 54 | Fixing |
| 55 | Providing and Fixing heavy quality 15mm dia CP brass angle cock as per relevant IS,Adson/Cera/Parrywaremake as per drawings and specifications |
| 56 | Supply |
| 57 | Fixing |
| 58 | Providing and Fixing heavy quality 15 mm dia, CP brass screw down long bodied bib tap with CP brass flanges as per relevant IS,Adson/Cera/Parrywaremake as per drawings and specifications |
| 59 | Supply |
| 60 | Fixing |
| 61 | Providing and Fixing C.P. brass three pronged robe hooks ofAdson/Cera/Parrywaremake with C.P. brass flange as per drawings and specifications |
| 62 | Supply |
| 63 | Fixing |
| 64 | Providing and Fixing in position mirror of size 600 x 450mm, made of Indian glass 6mm thick manufactured by Modi guard/Saint Gobain/Hindustan/Borosil/Asahi India/La Opala RG Ltd make factory silvered with PVC backing 4mm thick etc., completeas per drawings and specifications |
| 65 | Supply |
| 66 | Fixing |
| 67 | Providing and Fixing 15 mm dia PVC inlet connections to withstand temperature up to 600 C of\"Kohinoor/Prayag/ Adson/water tec\" make with heavy PVC check nut at both ends of length not exceeding 450 mm as per drawings and specifications |
| 68 | Supply |
| 69 | Fixing |
| 70 | Providing and Fixing isolating composite Brass Ball valve \"Akar/Zolato/Leader\" make with compression type integral seal end connection suitable for PE-AL-PE composite piping system as per IS-15450, suitable for hot and cold water Supply as per drawings and specifications:Isolating composite Brass Ball valve - 50x50mm (Suitable for 4050 composite pipe) |
| 71 | Supply |
| 72 | Fixing |
| 73 | Providing and Fixing in position at all elevations PVC pipes of\"Prince/Jain/ Kitec/Finolex/Supreme/Astral/Ashirvad\" makeof Type-Bconforming to IS 13592 of latest version and specials such as bends, junctions with or without doors, cowls, etc., for soil, waste, vent or anti-syphonage pipes & fixing pipes on GI brackets of approved design at minimum 1 m spacing with cost for core cutting, laying under floors etc complete as per drawings and specifications |
| 74 | 50mm |
| 75 | Supply |
| 76 | Fixing |
| 77 | 75 mm |
| 78 | Supply |
| 79 | Fixing |
| 80 | 110 mm |
| 81 | Supply |
| 82 | Fixing |
| 83 | 160 mm |
| 84 | Supply |
| 85 | Fixing |
| 86 | Providing and placing on terrace (at all floor levels) polyethene water Storage Tankscapacityas required of Sintex/Aquatec/Supreme Industrie/Penguin Tank Industries/Vectus Industries make with cover and suitable locking arrangements and making holes for inlet, outlet, scour and overflow pipes as per drawings and specifications |
| 87 | Providing and Fixing horizontal type high pressure ball cock of 40 mm dia \"Prayag\" make item code 155 / Or similar model inPolytuf/Wavin Vectus/King pipes/Polo India/Plasto make with required accessories like ball, rod, rubber washer and double check nut, all conforming to relevant IS etc complete as per drawings and specifications |
| 88 | Providing and Fixing single/multi PVC Nahani trap of self cleaning design with 75 mm dia outlet, Prince/Jain/ Kitec/Finolex/Supreme/ Astral/ Ashirvad make as per relevant IS,Stainless steel Grating and including necessary cement concrete 1:2:4 for embedding and making good the floor, connecting the trap to the waste pipe, forming circular hole up to floor level and rendering smooth etc.Complete as per drawings and specifications |
| 89 | Construction of inspection chambers of internal clear dimension 450 x450 up to a maximum depth of 600mm in 230 mm thickfly ash brick masonry in CM 1:6usingfly ash bricksas per IS:12894, class designation : 5 from the approved manufacturer by NPCIL, over a bed of 150mm thick 1:4:8 cement concrete foundation, plastering with CM 1:4, 20mm thick on inside, outside and all exposed surface finished with floating coat of neat cement, PCC 1: 2:4 for benching and channel finished with neat cement,Top covered with100mm thick RCC 1:2:4 grade slab with required steel reinforcements, , including providing & Fixing double seal C.I. manhole cover & frameof 450x 450mmweight not less than 38 kg (as per relevant IS),embedding the C.I. frame in RCC cover slab etc completeas per drawings and specifications. (Earth work excavation and steel reinforcement will be paid under relevant item) |
| 90 | Construction of inspection chambers of internal clear dimension 900 x600 mmup to a maximum depth of 900 mm in 230 mm thickfly ash brick masonry in CM 1:4, usingfly ash bricksas per IS:12894, class designation : 5 from the approved manufacturer by NPCIL, over a bed of 150mm thick 1:4:8 cement concrete foundation, plastering with CM 1:4, 20mm thick on inside, outside and all exposed surface finished with floating coat of neat cement, PCC 1:2:4 for benching and channel finished with neat cement, providing and Fixing C.I. steps weighing not less than 3.5 Kg/each at 300 mm centre to centre etc., Top covered with100mm thick RCC 1:2:4 grade slab with required steel reinforcements,, including providing & Fixing double sealC.I. manhole covers & frames of size 600 x 450mm of weight not less than 50 kg (as per relevant IS),embedding the C.I. frame in RCC cover slab etc complete as per drawings and specifications(Earth work excavation and steel reinforcement will be paid under relevant item) |
| 91 | Extra depth for above item, for depth beyond 900 mm, 300mm or part there of including providing and Fixing CI steps weighing not less than 4.5 kg/each etc, as per specifications |
| 92 | Providing and Fixing polyethylene - Aluminium polyethylene (PE-AL-PE) composite pressure pipe UV stabilized with carbon black confirming to IS:15450-2004 for water Supply (with required fittings and fixtures)including providing and Fixing composite box clamps/fixing pipes on GI brackets of approved designat 1000mm spacingfor external worksOr laying under floor wherever required and cutting the walls for required depth for concealed installation including cutting charges and making good the walls/concretefor internals and providing and Fixing all the required specials/fittings etc wherever required at all elevations including cost of scaffolding, core cutting etc. completeas per drawings and specifications (Earthwork excavation will be paid under relevant item). |
| 93 | 12-16mm dia(for internal water supply of Toilets) |
| 94 | Supply |
| 95 | Fixing |
| 96 | 16-20mm dia(for internal water supply of Toilets) |
| 97 | Supply |
| 98 | Fixing |
| 99 | 20-25mm dia(for internal water supply of Toilets) |
| 100 | Supply |
| 101 | Fixing |
| 102 | 32-40mm (for internal water supply of Toilets) |
| 103 | Supply |
| 104 | Fixing (for Ground sprinkler system piping) |
| 105 | Fixing (for internal water supply of Toilets) |
| 106 | 40-50mm |
| 107 | Supply |
| 108 | Fixing(for Ground sprinkler system piping) |
| 109 | Fixing (for internal water supply of Toilets) |
| 110 | 50-63mm(for Ground sprinkler system piping) |
| 111 | Supply |
| 112 | Fixing |
| 113 | 63-75mm(for Ground sprinkler system piping) |
| 114 | Supply |
| 115 | Fixing |
| 116 | 75-90mm(for Ground sprinkler system piping) |
| 117 | Supply |
| 118 | Fixing |
| 119 | 90-110mm(for Ground sprinkler system piping) |
| 120 | Supply |
| 121 | Fixing |
| 122 | Sprinkler Pumping Systemusing 1.75Hp Pressure Booster Pump (Head-50M) with accessories as per the following specification and comprise of with All fittings including electrical fittings and requirements to charge the Pump. Electrical Connection will be provided within a distance of 20M (Appx) from pump location. ( UG Sump ) Make : LUBI/TEXMO/KIRLOSKAR/ |
| 123 | Supply of 50mm dia Finolux/Kothari/Dutron/ Aquatech/Kalpataru/Waterman make green suction hoseas directed |
| 124 | Supply and Commissioning of Pop-up Rotory Sprinkler withNozzle of throw radius 16 to 20m Make - Rainbird /Hunter/ k RAIN/Pimtas/Toro |
| 125 | Providing & FixingCommissioning of Swing Joint 1\" x 12’’ length Make : Rainbird/hunter/Pimtas/toro |
| 126 | Providing, Fixing & Commissioning of Ball Valves with necessary fittings as Sprinkler Section Valve, for 2.0 \" dia Make - Harit / Simtas/Xeritech |
| 127 | Providing, Fixing & Commissioning of Air Release Valve 1\"\" Make -Harit / Simtas/Xeritech |
| 128 | Providing & Fixing of 6\" Rectangular Valve Boxes with openable lid, for enclosing Section Valve / Isolation Valve. Make - Rainbird/hunter/ecoaqua/sintex |
| 129 | Providing & Fixing of 10\" Rectangular Valve Boxes with openable lid, for enclosing Section Valve / Isolation Valve. Make -Rainbird/hunter/ecoaqua/sintex |
| 130 | Providing, Fixing & Commissioning of 1’’ Quick Release Coupler Key of Brass Body. Make - Rainbird/hunter/ecoaqua/sintex |
| 131 | Providing, Fixing & Commissioning of Quick Release Coupler Key Brass Body. Make - Harit / Rainbird/hunter/ecoaqua/sintex |
| 132 | Providing, Fixing & Commissioning of Quick Release Coupler Swiel Elbow Brass Body. Make -Harit/ecoaqua/sintex/Xeritech |
| 133 | Providing, fixing & commissioning of 45 m3 capacity Disc Filter with drain valve & necessary fittings. Make - Rainbird/Armas / Xeritech |
| 134 | Providing, Fixing & Commissioning of 2\"\" Pressure Release Valve Make - Harit / Zolato/Armas/Automat/Xeritech |
| 135 | Supply,Fixing & commissioning Of Automatic irrigation control system as interface Between Communication Cable and Solenoid Valve Make : Rainbird /Hunter |
| 136 | Providing, Fixing & Commissioning of Solenoid Valves, 2’’ dia with necessary fittings. Make - Rainbird /Hunter |
| 137 | Providing, Fixing & Commissioning of Common Wire - 1.0 sq.mm x single core cable for automation with Conduit Pipe Make - Polycab (ISI) / Havells/Kundan/Finolax |
| 138 | Consultancy Charges forInspection of Ground developmental works by deployment of Play ground development Expertwho possesses authorized Curator Certification from Board of Control for Cricket in India (BCCI). The cost includes the fee for consultants along with his technical team/experts etc, transportation charges, accomodation and all other incidental charges incurred. For every visit, the Sports expert should inspect the sequence of works/improvements/ suggetions etc and a Report on the same to be submitted to NPCIL. |
| 139 | Applicable GST Rate (%) Included in the Quoted Price |
