|
| 1 | Sub Head-I (CTO Compound, Cuttack) |
| 2 | Withdrawing a 3HP submersible pump set from the Bore well along with delivery pipe lines after disconnection of power supply cable, delivery pipes etc. complete as required. |
| 3 | Transportation of the faulty pump set from site to nearest authorized service centre and bring back to site after repairing i/c loading and unloading etc. as required. |
| 4 | Dismantling the submersible Pump motor set, checking and fault finding, preparation of bill of materials/defect listetc. complete as required. |
| 5 | Repairing of the 3 HP pump set i/c replacement of damaged impeller, testing, checking etc complete as required. |
| 6 | Lathe work of the shaft and replacement of the Gun metal Bush etc reassembling after necessary repairing etc complete as required. |
| 7 | Supplying and laying of 32mm diaHDPE pipe of PN 8 for protection ofcable complete as required.( Make : Oriplast /SS ). |
| 8 | Replacement of the burnt out/faulty/damaged/ worn out Submersible cable and nylon ropes by new pne offollowing types and sizes i/c fixing, connectionand testing etc. as required. |
| 9 | 3 core 2.5sqmm weather proof copper conductor submersible flat cable |
| 10 | 8mm Nylon Rope |
| 11 | Replacement of the following damaged pipe lines with accessories by new ones of following sizes i/c all plumbing works etc. as required. |
| 12 | 150 mm dia CPVC pipe (medium class) |
| 13 | 20mm dia UPVC pipe (medium class) |
| 14 | 20mm dia UPVCElbow |
| 15 | 40mm CPVC Union |
| 16 | 40x32 mm GI elbow |
| 17 | Rope wire Clamp |
| 18 | 32 mm steel nipple of 20 cm length |
| 19 | Steel nut bolt 3\" length |
| 20 | 8\" dia 10mm thick MS bore well cover plate |
| 21 | MS flat clamps holding the bore well pipe & pump |
| 22 | Cleaning of the sorroundings of the borewell and digging of the soil to detect the housing pipe bofore removing the faulty pump and Shifting of the recovered GI pipe to Electrical Division Office etc complete as required. |
| 23 | Re-installation of the repaired 3HP submersible pump set along with delivery pipe lines etc.in the bore well i/c reconnection of delivery pipe, electrical power supply cable, testing and trial run etc. complete as required. |
| 24 | Providing & fixing of following wattnew generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection suitable for operation on 230 volts, 50 HZ AC supply i/c fixing, connection and testing etc. as required. (Make : Philips/ Havells/ Wipro / Osaram / Crompton / Bajaj). |
| 25 | 25 Watt |
| 26 | 45 Watt |
| 27 | Replacement of faulty and damaged ceiling fan by new one of following size of Havells/Usha / Crompton/SS Makesuitable for operation on 240 volts AC, 50Hz i/c fixing and connection etc. as required. |
| 28 | a) 1200 mm ceiling fan |
| 29 | Replacement of the following burnt out/damaged cable/wires/lugs/sockets etc. by new one of following types, sizes and ratings PVC insulated FRLS copper conductor single core stranded flexible cable i/c laying / drawing in existing conduit/pipe, connection, testing etc. as required. |
| 30 | 10sqmm with copper wire |
| 31 | 10sqmm with copper sockets |
| 32 | Replacement offaulty SDFU switchesby new ones of following ratings with specious sheet steel enclosure so that there will be no need of separate cable gland boxes, having terminal shrouds and phase barriers on both sides suitable for Cylindrical/DIN type HRC fuse links, confirming to IEC-60947-3, IS/IEC:60947-3,after dismantlingthe old defective ones, fixing, connection & testing etc. as required. |
| 33 | 32 Amps 415 volts TPN SFU in Sheet steel enclosure with rewirable type fuses.(Make: L&T FN type, /Havells / Siemens) . |
| 34 | Supplying and fixing of flowing size hylam sheet cover i/c cutting for fixing switches/sockets and drilling hole for existing on the existing Switch board box etc complete as required. |
| 35 | Hylam sheet cover |
| 36 | Repairing of the 3 phase starter i/c replacement of faulty components like contactor, relay etc complete as required. |
| 37 | Sub Head -II (BSNL Staff Quarter Compound Bidanasi) |
| 38 | Supplying and fixing of the following size PVC box on wall etc complete as required. |
| 39 | 7\"x5\" PVC Box |
| 40 | 4\"x4\" PVC box |
| 41 | Supplying and fixing of flowing size hylam sheet cover i/c cutting for fixing switches/sockets and drilling hole for existing on the existing Switch board box etc complete as required. |
| 42 | Hylam sheet cover |
| 43 | Replacement of faulty and damaged ceiling fan by new one of following size of Havells/Usha / Crompton/SS Makesuitable for operation on 240 volts AC, 50Hz i/c fixing and connection etc. as required. |
| 44 | a) 1200 mm ceiling fan |
| 45 | Supply of the following electrical accessories/components for Electrical Light Fittings i/c testing etc. as required. |
| 46 | Driver with universal connector for LED light fittings (45watt) |
| 47 | Replacement of the lamp holders/ceiling roses etc. by new ones of reputed makes etc. as required. |
| 48 | 20Amps 250 Volts 3 pin industrial Plug& socket |
| 49 | Sub Head -III (BSNL Staff Quarter Compound Mahanadi Bihar) |
| 50 | Supplying and fixing of flowing size hylam sheet cover i/c cutting for fixing switches/sockets and drilling hole for existing on the existing Switch board box etc complete as required. |
| 51 | Hylam sheet cover |
| 52 | Supply and fixing of 32 Amps 240 volts DP main switch on existing angle frame/surface of wall/board i/c connection etc. as required. |
| 53 | Supplying and fixing of the following size PVC box on wall etc complete as required. |
| 54 | 4\"x4\" PVC box |
| 55 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 56 | 63 A |
| 57 | Supply of the following sizesPVC insulated & PVC sheathed Aluminium conductor armoured cable 650/1100 V. grade confirming to IS : 7098 (Part-1) 1988i/c transportation to respective sites etc. as required for replacement of faulty/burnt out cables. |
| 58 | 4 core 25 sqmm |
| 59 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 60 | Up to 35sqmm |
| 61 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size Up to 35sqmm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 62 | Up to 35sqmm |
| 63 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size Up to 35sqmmin the existing Duct/Air as required. |
| 64 | Up to 35sqmm |
| 65 | Supply and fixing of SMC Junction box of size 200mm x 140mm x 95mm (inside dimensions) with hinged door type including supply and fixing of 1no. 4 pole stud connector with nuts and bolts etc. as required. (Sintex GSJB2014/SS) |
| 66 | Replacement of the following burnt out/damaged cable/wires/lugs/sockets etc. by new one of following types, sizes and ratings PVC insulated FRLS copper conductor single core stranded flexible cable i/c laying / drawing in existing conduit/pipe, connection, testing etc. as required. |
| 67 | 16sqmm copper wire |
| 68 | 16sqmm copper sockets |
| 69 | Replacement of the defective sub-energymeter by Supplying and fixing of factory tested, direct connected type 1 phase 2 wire Digital energy meter of rating 10-60 amp, accuracy class-1.0, suitable for operation on 230/240V (P-N),50 Hz+5% AC supply, operating temperature range from+55 deg C to -10 Deg C, protection class of IP-51 compliance to IS-13779, IEC-62052-11 and IEC-62053-21 in the existing meter box provision for sealing of mains and terminal covers, etc.as reqd. (Make & Model: SECURE SARAL Uni-Directional Single Phase LED Energy Meter/equivalent model of L&T) |
| 70 | S/F following size medium class GI pipe in ground/on surface for protection of cable etc as reqd. (make: ATC / ATL / BST / GSI / ITC / ITS / IIA / JST / Jindal /TTA / Tata/Zenith) |
| 71 | 40 mm dia |