|
| 1 | Demolition of cement concrete un-reinforced of any description and in any position not otherwise specifically provided for, including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Excavation in trenches, n exc 1.5 mtr wide and n,exc 1.5 mtr in depth; for foundation etc. or for shafts, wells cesspit, manholes, pier holes,etc n,exc 10 Sqm on plan and n exc 1.5mtr in depth and getting out as in hard/dense soil complete all asspecified and directed by Engg-in-Charge. |
| 3 | M&L for hardcore of broken stone or boulder of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all asspecified and directed. |
| 4 | M&L for plain cement concrete 1:2:4 type D-2 (using 40mm graded stone aggregate) as in foundation filling as mass concrete or in sub base of floors complete all asspecified and directed. |
| 5 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling as mass concrete or in sub base of floors complete all asspecified and directed. |
| 6 | M&L for TMT steel bars10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specifiedas directed by the Engineer-in-Charge. |
| 7 | M&L for TMT steel bars6 to 8mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specifiedas directed by the Engineer-in-Charge. |
| 8 | Use and waste of formwork to sides of rough finished surfaces of concrete foundation, footing, bases of columns, raft beams, side and soffits (if any) of foundation, plinth beam and similar work, complete all as specified and directed. |
| 9 | M&L reinforced cement concrete nomonal mix type 1:2:4 type B-1 1:2:4 using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span and chajjas complete all asspecified and directed. |
| 10 | M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all asspecified and directed. |
| 11 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed. |
| 12 | Removing excavated material / soils to a distance not exc. 50 mtr and depositing where directed at a level not exc.1.5 mtr above the starting point, complete all as specified and directed. |
| 13 | M&Lforwalling pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in 1:2:4 type C1 (using 20 mm graded aggregate) set in cement mortar 1:6 complete all as specified ans directed by Engineer-in-Charge |
| 14 | M&L forrendering 15mm thick in CM (1:3)on concrete roof top surface and chajjas surface finished the surface even and smooth to get uniform level surface for laying of membrane treatement with using water proofing compoundcomplete all asspecified and directed. |
| 15 | M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 using Fe-410 Gde E-250complete all asspecified and directed. |
| 16 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 17 | S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings, cladding to walls etc, fixed with self tapping screws or \"J\" or \"L\" type hooks and bolts, complete all as specified and directed. |
| 18 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket tc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,luminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 19 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in eachpane glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all asspecified and directed. |
| 20 | S&F solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all asspecified and directed. |
| 21 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. |
| 22 | S&F for 150 mmAluminium anodised, barrel tower bolts of ex truded section and fixed complete all as specified. |
| 23 | S&F for 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21complete all as specified. |
| 24 | S&F for 100 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified. |
| 25 | M&L for 75mm thick cement concrete 1:4:8type D-2 (40mm graded aggregate) as in sub floors, sub bases, floors etc.complete all asspecified and directed. |
| 26 | M&L for non skid ceramic coloured tiles 7 to 8mm thick 1st quality (square/rectangular) area of each exc 0.06 sqm but n exc 0.11sqmas in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface and over and incl screed bed or bedding layer of mortar 15mm thick laying floor finished in CM 1:6, complete all as specified and directed. |
| 27 | M&L for coloured glazed ceramic tiles (350x250x7mm/450x350x7mm)thick on verticle surfacesset and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 10 mm thick cement plaster in CM 1:4, complete all as specified and directed. |
| 28 | S&F 15mm bore GI tubing medium grade including fitting complete to wall and ceiling or laid in floor complete all as specifed and directed. |
| 29 | S&F 20mm bore GI tubing medium grade including fitting complete to wall and ceiling or laid in floor complete all as specifed and directed. |
| 30 | S&F Vitreous china wash hand basin (550X400mm) white, flat back excluding taps,including brackets &32mm waste cuppling complete all as specifed and directed. |
| 31 | S&F 15mm Stop/angle valves, fancy type, chromium plated cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engr in Charge. |
| 32 | S&Fbrass CP brass shower rose with swivel joint 125 mm size all as specified in repairs complete all as specified as directed by engineer-in-charge. |
| 33 | S&F 15mm two way bib cock chromium plated cast copper alloy screwed pressure, with crutch or butterfly handle , screwed for iron pipe or unionfor health faucet complete all as specified and as directed by Engineer-in-charge |
| 34 | S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all asspecified and directed. |
| 35 | S&FPVC connections 15mm size with PTMT nuts of length 600mm complete all asspecified and directed. |
| 36 | M&L 10 ltr capacity PVC low level flushing cistern syphonic action type with inlet ball valve, float and handle and including bracket and flush pipe complete all asspecified and directed. |
| 37 | S&F vitreous China wash down Water closet pan (pedestal pattern) \"with plastic water closet seatcover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) in repairs, complete all as specified and directed. |
| 38 | S&Fhealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 39 | S&F vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all asspecified and directed. |
| 40 | S&F 100mm dia cast iron soil, wasteand vent pipe, sand cast, in any length with or without ears with connections are fitted/sealed with M-seal includingjoints fixed to wall complete all asspecified and directed. |
| 41 | S&F 75mm dia cast iron soil, wasteand vent pipe, sand cast, in any length with or without ears with connections are fitted/sealed with M-seal includingjoints fixed to wall complete all asspecified and directed. |
| 42 | S&F cast iron Nahani trap 100 mm dia with gratting including jointing to waste pipe fixed with concrete cement in (1:2:4) type B1 using 20 mm graded stone aggregate etccomplete all asspecified and directed. |
| 43 | S&F cast iron floor trap of 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4) complete all asspecified and directed. |
| 44 | S&F high density polythelne pipe of 50 mm bore dia (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all asspecified and directed. |
| 45 | S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all asspecified and directed. |
| 46 | S&F bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule complete all asspecified and directed. |
| 47 | S&F600x450 mm beveled edge looking mirror of selected quality glass and backing with PVC frame and fixed to wall with PVC rawl plugs with steel screws and cup washerscomplete all asspecified and directed. |
| 48 | S& F 15 mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed complete all asspecified and directed. |
| 49 | S&F 1000 ltrs PVC rotational moulded polyethylene water storage tanks triple layer made (cylindrical vertical with closed top ) hoisted and fixed in position all as spd in SSR part-I complete all asspecified and directed. |
| 50 | S&F ball float valve PTMT with epoxy coated aluminimum rodfor 20 mm bore pipe high pressure with polythelene high density float and complete screwed for iron pipe, complete all as specified and directed. |
| 51 | S&F 600mm long CP towel rail offixed to wall with steel screws and PVC rawl plug complete all asspecified and directed. |
| 52 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all asspecified and directed. |
| 53 | M&L for preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified. |
| 54 | S&F 10mm thick plaster of paris ceiling (Gypsum anhydrous) as in ceiling fixed on GI frame work, complete all as specified and directed. |
| 55 | S&F Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia.40mm long, complete all as specified and directed. |
| 56 | S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete allas specified in section 8 of SSR Part-II (2020) drawing. |
| 57 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC framecomplete allas specified in section 8of SSR Part-II (2020) drawing. |
| 58 | M&L for Salt glazed stone ware drain pipes grade \"A\" internal dia of pipe 150 mm laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed. |
| 59 | M&L cement concrete bedfor drain pipe of 150 mm bore diain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) including packing under and completely surronding pipes after they are laid and tested, complete all as specified. |
| 60 | M&L for Providing & fixing false ceiling at all heights with GRG (Glass Fibre With fully Reinforced Gypsum) false ceiling tiles of semi perforated 12mm tiles ,Size 595 x 595 mm of approved texture, design and patterns having moisture micro tegular edged or 10 mm content less than 2%, humidity resistancethick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG 8225:1987, Noncombustible as per BS 476 (part 4) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. |
| 61 | M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) etc Fe 410 -W (Gde- E- 250) quality-A complete all asspecified and directed. |
| 62 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all asspecified and directed. |
| 63 | S&F GI wire chain link fencing (n exc 2.5kg/sqm) 3mm thick, UV resistant, 1mm dia PVC coated 75X75mm mesh size complete all asspecified and directed. |
| 64 | S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all asspecified and directed. |
| 65 | S&F Mild steel round bars 10 mm dia cut to length bent to shape as required as in chain link fencing strengthening bars.Fe-410-W(Gde.E-250) quantity-A or Fe 290 (Gde-E-165) complete all asspecified and directed. |
| 66 | Surface excavation n.exc (not exceeding) 30 cmdeep and averaging 15cmdeep and getting out in hard / dence soilcomplete all as specified and directed by Engineer-in-Charge. |
| 67 | M&L for cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all asspecified and directed. |
| 68 | Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 150 mm PCCcomplete all as specified ans directed by Engineer-in-Charge. |
| 69 | Forming Construction joint 30mm deep x 10mm wide filled with sealing compound For Grade B for 150 mm PCCcomplete all as specified ans directed by Engineer-in-Charge. |
| 70 | M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Conductor drawn through CASING CAPING of suitable size , medium grade, ISI marked including necessaryAccessories,surface as ordered, mounted on 1.6mm thick Sunk Mild Steel Pressed Terminal Box of suitable size duly painted with Red Oxide Metal Primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, Fan Regulators, etc. and Earth Continuity connected to Common Earth dolly for ONE LIGHT/FAN POINT/Bell PointCONTROLLED BY ONE 1-WAY SWITCH 6 AMP including grouting Conduit on Brick Walls, etc. and Making Good disturbed Surfaces of Brick Walls, Ceilings, Floors, etc. in Cement Mortar 1:3 and necessary Surface Treatments so as to match with the Existing Finishes, complete all as specified and as directed. |
| 71 | One light & exhaust fan point control by one switch. |
| 72 | One5 pin socket outlet on Independent board complete all as specified and as directed. |
| 73 | - ditto- allas per item No-70 here-in-beforebut with 2.5 Sqmm wire for 15 Amp socket outlet on independent board |
| 74 | M&L Sub-main Wiring with 2-Runs of 6 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty along with the Wiring drawn inCONDUIT/PVC CASING & CAPING, complete all as specified and as directed.Note : (i) Three length of wire along with conduit will be measured as one Length. |
| 75 | S&F Switch Piano 6 Amp, Flush type, Single Pole, 1-way, complete all as specified and as directed. |
| 76 | Supply and Fixswitch socket combination 2 in 1,5 pin,5 Amps flush type 220 V,complete all as specified and as directed by Engr-in-charge. |
| 77 | Supply and Fixswitch socket combination 2 in 1,6 pin,15 Amps flush type 220 V,complete all as specified and as directed by Engr-in-charge. |
| 78 | S&F Ceiling Rose, 3 Terminals, PVC Polycarbonate, Isolated body complete all as specified and as directed. |
| 79 | S&F LED Light fitting enviornmental friendly, energy efficient 20 watt LEDmirror light 4 fit long complete all as specified and as directed. |
| 80 | S&F LED Light fitting enviornmental friendly, energy efficient 10 watt LEDmirror light 2 fit long complete all as specified and as directed. |
| 81 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 82 | S&F of exhaust fan 300 mm sweep steel body AC single phase, 230 volts complete with blades , andframe and louvers etc complete all as specified and directed by Engr in charge. |
| 83 | S&F MCB distribution board double Door of sheet metal Single pole and neutral4 way with 200 amps rated bus bar 240 volts ,complete all as specified and as directed by Engineer-in-Charge. |
| 84 | S&F MCB ,SPN 240 volt 40 Amp ,complete all as specified and as directed by Engineer-in-Charge. |
| 85 | S&F MCB single Pole 240 Volts 6 to 32 Amp ,complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the plate at a depth not less\"than 1.5 mtr belowground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2& RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion including taking down existing unserviceable earthing complete all as specified. |
| 87 | S&F 25mm bore GI tubing medium grade including fitting complete to wall and ceiling or laid in floor complete all as specifed and directed. |
| 88 | S& F 25 mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed complete all asspecified and directed. |
| 89 | S&F energy efficent square surface ceiling mounted LED down 2 x 2 luminaire light, 34/36 watt white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover complete all as directed by Engr-In-Charge. |
