Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | BOQ Item No. 01 to 16 Common for Jobs Demolition of brick work built in cement mortar or cement lime mortar including all of quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articlescomplete all as specified. |
| 2 | M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 3 | M & L for Preparing and applying two coats of cement base paint on newly Plasterd surface of walls complete all as specified and as directed. |
| 4 | Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified. |
| 5 | M&L for Cement concrete 1:2:4 Type B1(20 mm graded aggregate as in lintels upto 1.5m clear span, cills,steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs etc |
| 6 | M & L for 40 mm thick cement concrete type B0, 1:2:4 (12.5mm graded aggregate) as in flooring and similarand finishing the surface fair and even w/o using extra cement complete all as specified and directed. |
| 7 | S&F of 110mm bore PVC (SWR) pipes,single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed. |
| 8 | All as per item no. 07above but 75 mm bore fixed to wall. |
| 9 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed. |
| 10 | All as per above item but 75 mm bore of pipe etc. |
| 11 | S&F of 110mm bore PVC (SWR) bends,any radius with access door complete all as directed. |
| 12 | S&F of 75mm bore PVC (SWR) bends,any radius with access door complete all as directed. |
| 13 | S&F in repair vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed |
| 14 | S & F, in repair PVC connections 15 mm size with PTMT nuts of length 450 mm all as specified and directed. |
| 15 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and directed. |
| 16 | S/F in repair CP grating with or witout waste hole size 100 mm fixed with white cement in tiles flooring complete all as directed by Engr-in-charge. |
| 17 | Taking down chowkats or frameswith shutters (without taking off shutters from the frames) area n.exc 1.50 sqm each, and removing from site, all as specified and directed. |
| 18 | Taking down chowkats or frameswith shutters (without taking off shutters from the frame) areaexc 1.5 Sqm but not exc 4 Sqm each and removing from site all as specified and directed. |
| 19 | Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each all as specified and directed |
| 20 | S&F mild steel framed work as in doors or gates of angle or other section drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and stainless steel hings, Fe-410W (Gde-E-250) quality-A, complete all as specified and directed. |
| 21 | S&F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 22 | Taking down existing MS gate shutters and rexing in the same opening after necessary weldings, repairs to bush, holdfast etc and making the shutter functional, area of each shutter n.exc 4 sqm each complete all as specified and as directed. |
| 23 | S&F pressed steel frame for door with one or more rebates of size 125x60mmincluding necessary fixing lugs, lock striking plates,hold fasts etc. , size /profile of frame as per IS,complete all as specified & directed. |
| 24 | S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates ,hold fast ,etc. complete size /profile of frame as per IS complete all as specified and directed. |
| 25 | S&F 30mm thick factory made flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed. |
| 26 | S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed. |
| 27 | S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as specified and directed. |
| 28 | S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC\"C\"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame all as specified and directed. |
| 29 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 31 | S&F steel windows with side hung shuttersincluding projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed and welded, complete all as specified and directed. |
| 32 | S&F steel windows with side hung shuttersincluding projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed. |
| 33 | S&F steelventilator withtop hung shutter including box type hinges, peg stay and glazing bars complete withdove tailed or welded, complete all as specified & directed. |
| 34 | M&L18-19 mm thick plywood, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work, complete all as specified and directed |
| 35 | M&Lfor 0.90mm thick decorative PVC laminates \"Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 36 | M & L for 6mm thick external teak wood lipping for block board or veneered particle board , fixed with nails, complete all as specified and directed. |
| 37 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws, complete all as specified and directed. |
| 38 | S&F 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished complete all as specified and directed. |
| 39 | S&F 100 mm long, fancy type, stainless steel handles, complete all as specified and directed. |
| 40 | S&F magnet catcher for cup board shutter complete all as specified and directed. |
| 41 | M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 Sqcm fixed with nail complete,all as specified and directed. |
| 42 | M&L 2nd class hard wood, plain fillets, square or rectangular or tringular in section clean sawn sectional area not exc 3 sqcm fixed with nail, complete,all as specified and directed. |
| 43 | S&F 100mm size butt hinges, medium weight, stainless steel, and fixed all as specified and directed. |
| 44 | S&F in repair butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 45 | S&F 150mm long aluminium handles cast type, anodised,complete all as specified and directed. |
| 46 | S&F in repair 150mm long aluminium handles cast type, anodised,complete all as specified and directed. |
| 47 | S&F, 200 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed. |
| 48 | S&F in repair200 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed. |
| 49 | S&F aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed |
| 50 | S&F in repairs aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed |
| 51 | S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate, fixing by welding or screws as required complete all as specified & directed. |
| 52 | S&F in repairs 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed (Fixed as in Existing iron /wooden frame in own arrangement). |
| 53 | S&F, 125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 54 | S&F in repair125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 55 | Hacking out old broken glass (any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 56 | S&F of 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed. |
| 57 | S&F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane, all as specified and directed. |
| 58 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples, complete all as specified and directed. |
| 59 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples including taking down from any section and refixing with new wire mesh with tinned tack/by welding/bolting/beading in steel/wooden door/window/ ventilator and making good the disturbed portion during execution, complete all as specified and directed. |
| 60 | S&F 140mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 61 | S&F 0.56 mm Plain Aluminium sheeting alloy 31000H4in straight flashing of door complete all as specified and directed. |
| 62 | M&L for prepration of newwooden surfaces andapplying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth complete all as specified and directed. |
| 63 | M&L for preparation of newly steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10 cm width or girth, not oterwise described, complete all as specified and directed. |
| 64 | M & L for brick work using old size fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete,all as specified and directed. |
| 65 | All as per item No. 64 above but except bricks. |
| 66 | Taking down cement plaster on brick or stone walls etc including ranking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 67 | M&L rendering 10mm thick on fair faces of brick work in CM (1:6) surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 68 | M&L rendering 5mm thick in CM 1:3as in ceiling ,soffits of slaband finish the surface even and smooth without using extra cementcomplete all as specified and as directed. |
| 69 | M&L three coats of white wash on ceilings including preparation of newly plastered surfaces complete all as specified and directed. |
| 70 | M & L of preparation of newly plastered surface of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work complete all as specified and directed. |
| 71 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 72 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, laid over 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 73 | M&L for glazed ceramic coloured tiles (joint free) of size300x600x 8mm to 10mm thick over 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected. |
| 74 | M & L, 25 mm thick cement concrete1:2:4type B-1using 20mm graded aggregate as in floors, surface finished even & smooth using extra cement complete all as specified and directed. |
| 75 | Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of capacity exc 250 n exc 500 ltrs complete all as specified and directed. |
| 76 | S&F 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20 mm dia float valvesall as specified in SSR Part I and including dismantling of existing tank, complete all as specified and directed. |
| 77 | S&F, in repair 20mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed. |
| 78 | S&F in repair gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed. |
| 79 | S&F steel water GI tubing 15mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe complete all as specified and directed. |
| 80 | S&F steel water GI tubing 20mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe complete all as specified and directed. |
| 81 | S&F steel water GI tubing 25mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe complete all as specified and directed. |
| 82 | Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cuttingnot exc 10 cm girth all as spcefied and directed. |
| 83 | S&F in repair viterous china Wash HandBasin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste fittings/coupling,PVC waste pipe MS brackets complete all as specified and directed. |
| 84 | S & Fin repair CP pillar tap, castcopper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe 15mm bore. |
| 85 | S&F in repair of15mm CP bib tap long body pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes complete all as specified. |
| 86 | S & F in repair stop cock /angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes 15mm bore. |
| 87 | S&F in repair 15mm dia spindle for bib taps,angle valve and pillar taps as required as per sample given by Engr-in-Charge, complete all as specified and directed.(Including taking down existing spindle carefully and fixed the same in position). |
| 88 | S&F in repair stop valves, 15mm dia, cast copper alloy, CP fancy type with long shank and cup (concealed type) screwd down, high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions complete all as specified and directed. |
| 89 | S&F in repair kitchen sink with drainage board made of stainless steel 1.00 mm thick with plug washer and waste including bedding in cement mortar including fixing cantilever bracket and connecting union to pipe overall size 915 X 460 mm bowl size 410 X 330 X 160 mm complete all as specified and directed. |
| 90 | S&F in repair stainless steel kitchen plate rack made of 0.80mm thick sheet of size 750x600x250mm and fixed to wall, complete,all as specified and directed. |
| 91 | S&F in repair viterous china wash down water closed pan (Pedestal pattern) with \"P\" or \"S\" trap white including connection to trap and cistern, flush pipe, PVC seat cover and making good disturbed surface of floor complete all as specified and directed. |
| 92 | S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed. |
| 93 | S&F, in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed. |
| 94 | Supply and fixing 32mm bore Brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified. |
| 95 | S&F in repairCP Showerrosewith arms15mm bore ans size 125 mm complete all as specified and directed. |
| 96 | S&F, in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm bore, all as specified and directed. |
| 97 | S&F, in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 98 | S&F in repair, PVC (SWR) floor trap, plain with grat-ing including joint-ing with solvent cement (Diameter of outlet 75mm) all as specified and directed. |
| 99 | S&F in repair sheet glass shelf assemble consisting of 5.5 thick sheet glass shelf 12cm wide with CP bracket gaurd & railing 60cm longall as specified and directed. |
| 100 | S&F, in repair brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed. |
| 101 | S&F in repairs, PVC coated, MS curtain rods 22 - 25 mm dia with and including fixing of two Nos MS brackets and decorative type PVC knobs at both ends of curtain rod all as specified and directed. |
| 102 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequalcomplete |
| 103 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete |
| 104 | S&F in repair PVC(SWR) P trap 110mm, setting and jointing with solvent cement |
| 105 | S&F in repair PVC(SWR) Nahani trap 75mm, setting and jointing with solvent cement |
| 106 | S & F in repair PVC (SWR) branch piece, Single (single y) equalor unequal (75 mm Bore) complete all as specified. |
| 107 | S&F of universal ductile iron/rubber flexible coupler suitable for joining CI PIPE of 100mm diameter to PVC of 110 diameter pipe of matching OD,EPDM Gasket,Mechanical locking band corrosion resistance finish conforming to PN/16-EN545 including cleaning & preparation of Old and New pipe ends and leak proof installation complete all as specified and directed as as per Engineer-in-charge. |
| 108 | S&F of universal ductile iron/rubber flexible coupler suitable for joining CI PIPE of 100mm diameter to PVC of 75mm diameter pipe of matching OD,EPDM Gasket,Mechanical locking band corrosion resistance finish conforming to PN/16-EN545 including cleaning & preparation of Old and New pipe ends and leak proof installation complete all as specified and directed as as per Engineer-in-charge. |
| 109 | S&F, in repair, 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 110 | S&F in repair CP brass health faucet not exc 1.25 m long flexible tube including wall hook complete all as specified and directed . |
| 111 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 112 | S&F in repair \"E\" board 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white.The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers.Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc.The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall,Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly.600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee.Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture insturction. |
| 113 | Repair to leakage/sepage from toilets and bathroom by taking down and refixing of joints of CI/GI pipes with solvent/ M- seal of including taking down and refixing existing false ceiling and making good the disturbed surface complete all as specified and directed. |
| 114 | S&F in repair 20mm outerdia3-layer PP-R poly propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to wall,ceilings or in floors all as specified and directed . |
| 115 | S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12x16 mm adapter incl taking down and refixing of taps/valves etc and making good the dismantled surface with white cement complete all as specified and as directed. |
| 116 | S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12x16 mm elbow incl taking down and refixing of taps/valves etc and making good the dismantled surface with white cement complete all as specified and as directed. |
| 117 | S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12x16 mm TEE incl taking down and refixing of taps/valves etc and making good the dismantled surface with white cement complete all as specified and as directed. |
| 118 | S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12-16x20-25x25-32 mm tank TEE complete all as specified and as directed. |
| 119 | S&F in repairs 3-layer PP-R poly propylene random copolymer, 25-32 mm plain TEE complete all as specified and as directed. |
| 120 | M & L for cleaning of all loose dirt and dust fromroof surfaces and applyingroof treatment as under :- (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces and allow to dry.(b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total comsumption having below properties:-1. Elongation - 500%-600%2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm.Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. |
| 121 | M&L for screed bed10mm thick in CM 1:3 on concrete surfaces/ roof/ parapet wall using WPC as per manufacturer instructionfinished fair & even without using extra cement complete all as specified and directed. |
| 122 | M&L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roofkerbs/padding /benching or mud stops, and platform for mounting service tanks, rounded,chamfered on edges including necessary use and waste of fromwork etc all as specified anddirected. |
| 123 | Dismantling of existing roof treatment of any description and any thickness including PCC padding complete including removal of debris away from the site complete all as directed |
| 124 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on wall,complete all as specified & as directed. |
| 125 | All as per description of serial item no. 124 above but applying applying one coat of white wash on ceiling surfaces. |
| 126 | All as per description of serial item no. 124 above but applying applying twocoat of white wash on wall surfaces. |
| 127 | M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint,complete,all as specified & directed. |
| 128 | M&Lfor preparation of old decorated surfaces of walls by washing, rubbing down & stopping of painted surfaces and applying two coat of cement base paint, complete,all as specified and directed. |
| 129 | M&L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper (OBD) of approved shade/tint, complete all as specified and as directed. |
| 130 | M&L for preparation of old decorated surfaces of walls and applying two coat of oil emulsion distemper (OBD) of approved shade/tint complete, all as specified and as directed. |
| 131 | M&L forpreparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint,complete all as specified and as directed. |
| 132 | M&L forpreparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete, all as specified and as directed. |
| 133 | Complete removal of existing treatment from wall Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on old work over two coats of wall care putty (1 mm thick) to make surface even and smooth, and complete all as specified and directed. |
| 134 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white basesynthetic enamel paint,all as directed. |
| 135 | S & F in repair /easingsteel windowshutter size n. exc 1.5 sqm each including fixing of wire cloth of0.36 mm dia stainless steel grade 304with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading ,including welding where required, making good for smooth handling , andfixing of missinghandles ,tower bolt etc completeand refixing in same openingall as specified and directed.Note: The buildings in this area are 3-storied, no extra payment will be claimed for working at heights.All rates are inclusive of rate of scaffoldings, safety gears, ladders, ropes, harness etc |
| 136 | M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:4 complete all as specified and as directed. |
| 137 | Ditto all as per item No 136 above but except bricks(Old size Bricks obtained from item No 1 above shall be used) |
| 138 | M&L brick work with sub class B fly ash bricks in one brick thick honey comb walling,built in cement mortar 1:4 complete all as specified and as directed. |
| 139 | Taking down cement plaster on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc but lime plaster any description complete all as specified and directed |
| 140 | M&L for PCC (1:2:4) Type B-2, using 40 mm graded stone aggregate as in foundtaion, filling and mass concrete complete all as specified and directed. |
| 141 | M&L PCC 1:3:6 type C2 ( with 40 mm graded agrregate) in Surface channel or drains including necessary form works , stops ,moulds etccomplete all as specified and as directed. |
| 142 | M&L for cement concrete type C-2 1:3:6 using 40 mm graded stone aggregate in filling foundation and mass concrete, complete all as specified and directed. |
| 143 | M&L for Aggregate for loose filling, of broken bricks of gauge 40mm to 80mm graded. |
| 144 | Forming Contraction (Dummy) joints 100mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed. |
| 145 | Supply only glass dividing strips 38mm wide and 3mm thick |
| 146 | M & L for 75 mm thick cement concrete type C2, 1:3:6 (40mm graded aggregate) as in sub base of floorscomplete all as specified and directed. |
| 147 | S&F non skid tiles, exterior grade, any pattern of size 300x300mm/ 400x400mm 10-12 mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed. |
| 148 | S&F chequered tiles rubber moulded, glossy finished, decorative designed cement concrete tiles 25 mm thick size of tiles as approvedset, jointed and pointed in neat cement slurry with grey cement and pigments in floor incl 15 mm thick screed bed with cm 1:4 complete all as specified and as directed. |
| 149 | Dismantling stone slabs ortiles laid bedded andlaid dry and pointed in any mortar of any description or thickness in floors, aprons etc |
| 150 | S&F Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and properembedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all as specified and directed. |
| 151 | M&L for refixing of interlocking paver blocks with grey cement and pigment complete all as specified and directed. |
| 152 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including necessary forms mould mitred /stopped ends etc |
| 153 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto |
| 154 | Demolition of reinforced cementConcrete of any description and in any position not otherwise specifically provided for (reinforcement cut as reqiured to faciliate demolition) complete all as specified and directed. |
| 155 | Material and labour for precast manhole cover slabs in RCC 1:2:4, type B-1, using 20 mm graded stone aggregate and set in CM 1:4 complete all as specified anddirected by the Engineer-in-Charge. Note: Reinforcement will be measured and paid for seperately) |
| 156 | S&F Precast factory made steel fibre reinforced concrete manhole covers with frame of thickness 75 mm of any shape as require (circular/square/rectangular), fixed with CM (1:4) complete all as specified and as directed. (Note: Plan area will be measured for payment) |
| 157 | M&L forreinforced cement concrete type B1 1:2:4 (20 mm graded aggregates) as in slabs supported on walls, roof beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified |
| 158 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregates) as in Beams, cantilevers, bressummers, lintelsand the like complete all as specified |
| 159 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified |
| 160 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified |
| 161 | M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exc 200 mm thick horizontal or sloping for rough finished surface of flat concrete complete all as specified and directed. |
| 162 | M&L for form work to sides and soffits of roof beams, lintels, lever shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified. |
| 163 | M&L for form work to concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batterrough finished surfaces of concrete flat all as specified. |
| 164 | M&L for form work to sides pillars, posts, struts, piers, columns and stanchions etc square or rectangular rough finished surfaces of concrete flat all as specified. |
| 165 | M&L for formwork to edges of concrete flats, roofs and sides of RCC/ PCC bands in walls, and similar work exc 5cm but n exc 10cm wide complete all as specified |
| 166 | S&F (TMT bars) 10mm dia and over cut to length, bent to shape required,including cranking and bending spirally for hooping for coloumns, hooking ends and binding with and including M.S wire not less than 0.9mm dia all as specified and directed. |
| 167 | M & L TMT bars 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 168 | Description same as item noabove but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified. |
| 169 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long and 16 to 20mm diameter of neck complete all as specified. |
| 170 | M&L for MS round bars (Fe-410-W (Gde E-250) quality A or Fe-290 (Gde-E-165))) 10mm dia and over cut to Length bent to shape requiredincl cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips . |
| 171 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 172 | S&F mild steel angles/flat iron as in fencing post and struts including embeeded in concrete and screwing etc including securing bolts, cutting tops to shape as directed, drilling holes notching for wire, etc complete all as spficied Fe 290 Gde E-165, complete all as specified and directed. |
| 173 | S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; railings;and similar work conforming to Fe.290.Gde-E-165, framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and as directed. |
| 174 | S&F MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde E- 250) quality A complete. |
| 175 | S&F pre-painted galvalume aluminium zinc coating base corrugated steel sheets 0.50mm thick of any approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling of existing sheet (corrugated, semi corrugated, plain etc) as in roofs etc including ridges complete all as specified and directed. |
| 176 | S&F pre-painted galvalume aluminium zinc coating base Plain steel sheets 0.50mm thick of any approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling of existing sheetas in ridges complete all as specified and directed. |
| 177 | M & L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 178 | M&L for preparation of new steel Surfaces of any description, n.exc 10cm in width or girth and applying two coats of enamel paint over a coat of red oxide primer, complete all as specified and directed |
| 179 | Dismantling fencing wire mesh, any type |
| 180 | S & F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured |
| 181 | Supply only Chain link MS galvanisd fencing, any size or type |
| 182 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 183 | S&F 2mm thick PVC translucent Plain sheet fixed with coach screw and washer in roof, wall etc including dismantling of existingtranslucent sheet/CGI/AC sheet etc complete all as specified and directed. |
| 184 | Excavating over areas, not Exc 1.5 m deep and getting out in soft/loose soil. |
| 185 | Excavating over areas,Exc 1.5 m deep and getting out in soft/loose soil. |
| 186 | Excavationin trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10 sqm on plan and n exc 1.5mtr in depth and getting out in soft/loose soils complete all as specified and directed. |
| 187 | -ditto- as above but exc 1.5 m depth |
| 188 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil |
| 189 | Removing excavated material n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed. |
| 190 | S&F 150 MM bore Reinforced concrete pipes, class NP2, laid in trenches andjointed with collars in cement and sand mortar 1:1Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), set in cement mortar, incl laying of 100 mm thick Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately ) |
| 191 | S&F 200 MM bore Reinforced concrete pipes, class NP2, laid in trenches andjointed with collars in cement and sand mortar 1:1Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), and concrete bed, set in cement mortar, incl laying of 100 mm thick Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 200 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately ) |
| 192 | S&Ffor SGSW drain pipes of 150mm bore including taking up broken sewage pipe linelaid in trenches andjointed with collars in cement and sand mortar 1:1Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), and concrete beds,set in cement mortar, incl laying of 100mm thick Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 150 mm bore including packing under, and haunching / Surround against the sides of pipes after they are laid and tested complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately) , all as specified and directed. |
| 193 | S&F DWC (Double wall corrugated ) 150 mm dia pipes manufactured as per IS 16098(part -2) having internal surface smooth and external corrugated surface of SN -4 stiffness laid and jointed Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), and concrete beds,set in cement mortar, incl laying of 100mm thick Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately) , all as specified and directed. |
| 194 | M&L for Cutting into existing manholes for connecting new drains, 150 mm bore and making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete |
| 195 | Taking down rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store |
| 196 | S&F in repairs vitreous china squatting pan \"Orissa\" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed. |
| 197 | S&F in repair for Plastic water closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 198 | S&F in repair Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed |
| 199 | S&F, in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed. |
| 200 | S&F in repairs 32 mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified. |
| 201 | S&F in repairs 75 mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 202 | Dewatering of soak well , septic tanks by using mechanicalpump diesel driven with fuel operator and crew of water etc at siteall as specified and directed by Engineer in charge. |
| 203 | Cleaning of soak well, septic tank by way of desludging foreign material manually/mechanically and removal of sludge/silt/liquid mud sand (in foul conditions) etc, and disposed off outside of MOD premises (at thelocation notified by the local Municipal Corporation/Cantt board as per rules of public health), including digging required nos of pits for depositing sludge and future capping the pit with the 25 cm thick layer of soiland sprinkling bleaching powder ( including supply of bleaching powder) over the area of ditches with one metre around complete all as specified and directed. |
| 204 | Cleaning of blockage of sewer lines of any sizes/ dia of sewer line (i.e. branch sewer line, main sewer line) by way of cleaning desludging foreign material as well as roding ofsewer line between successive manholes manually/mechanically or pumping out sewage from blocked line including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional from Ist manhole upto final drop as septic tank, soakage well all as specified and directed . |
| 205 | Cleaning of all manholes upto 1.5 meter depth of any size and removal of sludge/silt/liquid mud sand (in foul conditions) etc, and disposed off out of MOD premises (at thelocation notified by the local Municipal Corporation/Cantt board) (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soiland sprinkling powder ( including supply of bleaching powder) over the area of ditches with one metre around complete all as specified and directed. |
| 206 | Cleaning of all manholes upto 3.00 meter depth of any size and removal of sludge/silt/liquid mud sand (in foul conditions) etc, and disposed off out of MOD premises (at thelocation notified by the local Municipal Corporation/Cantt board) (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soiland sprinkling powder ( including supply of bleaching powder) over the area of ditches with one metre around complete all as specified and directed. |
| 207 | Cleaning of all blockages of Nahni traps/floor traps/bottle traps, blockages of WC\"s, upto 1st manhole/Gully Trap in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning ofdrain pipes of any diaby rodding and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at thelocation notified by the local Municipal Corporation/Cantt board).complete all as specified and directed.Note :- For Item No 203 to 2071.The cleaning shall be carried out with mechanized operation by means of diesel / electric operated vehicle mounted hydraulic operated high pressure suction -cum -jetting machines fitted with pump of required capacity and the sludge sucked out with Super Succer Machine of required capacityand sent to storage tanks for further disposal to the authorised disposal site land at any distance and without any additional cost. 2. The sludge deposited in sewage line shall be fully cleaned and disposed off the same outside the MOD land at any distance and without any additional cost , on the same day when it was taken out.The job shall be carried out with safety precaution equipmentand with strict supervision .3. During the mechaized operation , the service provider /Contractor shall be equiped with Gas monitor , nylon rope ladder , torch light and compressor blower etc along with the sewage cleaning truck mounted suction / jetting machine . 4. The unit rate quoted by the contractor shall interalia deemed into the cost of providing skilled driver and operator and supervising engineer including provision of water for jetting & removal of sludge /silt /liquid /mud & sand (in foul position )etc. 5. The contractor shall engage the above mentioned T & P and intimate to Enginner - In -Charge in writing with Machine No./ Vehicle No. etc for their record and prior approval .6. A Register shall be maintained by contractor showing the Machine No /Vehicle No. and their deployment at site mentioning time and date duly sighned by concern JE , Engr -in- charge and contractor and the same register shall be produced while claiming the payment by the tenderer . |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
