|
| 1 | M&L for rendering 15mm thick in two coats (10+5mm) polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces on walls, preparation for Acrylic emulsion and applying applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces including necessary scaffolding upto 15m height and removing grass, roots of plants, dry leaves & broken branches at any place of bldg and incl taking down cement plaster of any description from brick or stone walls including raking out joints, hacking for key , scrubbing down with water etc and removing debris outside MD land upto requisite distance complete all as specified. |
| 2 | M&L for rendering 10mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and 1 mm thick (minimum) white cement based wall care putty onold surfaces of wallsetc, finished even and smooth,including necessary scaffolding upto 10m height incl Taking down cement plaster of any description from brick or stone walls including raking out joints, hacking for key , scrubbing down with water etc and removing debris outside MD land upto requisite distance complete all as specified and directed. |
| 3 | M&L for rendering 5mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces and applying three coats of white wash including necessary scaffolding upto 10m height incl Taking down cement plaster of any description from brick or stone walls including raking out joints, hacking for key , scrubbing down with water etc and removing debris outside MD land upto requisite distance complete all as specified and directed. |
| 4 | M&L for structural repairs to columns, beams, slabs and chajjas at maximum height of 16 mts including scaffolding and safety measurements completely all as specified and directed by Engineer-in-charge in following steps as mentioned below1) Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning including taking down of cement plaster and disposal of malba out side the premises etc. complete as directed. Hard concrete should not be removed by force.2) M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. \"Feovert\" of \"Krishna Conchem\" OR \"Roff Rust Cleaner\" of \"Pidilite\" OR \"Shali Rustoff\" of \"STP Ltd\", on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.) |
| 5 | 3) M&L for Anticorrosive Treatment to Reinforcementusing Corroseal - ZR of M/s Krishna Conchem orEpoxy Zinc Primer of M/s. Dr. Fixitby application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat.The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed. 4) M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchemas approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete& new concrete by brush application, complete all as specified and directed. |
| 6 | 5) M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit upto 40mm thickness including levelling, profiling etc in two layers,each layer not exceeding 20mm, complete all as specified and directed.6) M&L for rendering 15mm thick in two coats (10+5mm) polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces on walls, preparation for Acrylic emulsion and applying applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces |
| 7 | M&L for structural repairs to columns, beams, slabs and chajjas at maximum height of 16 mts including scaffolding and safety measurements completely all as specified and directed by Engineer-in-charge in following steps as mentioned below1) Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning including taking down of cement plaster and disposal of malba out side the premises etc. complete as directed. Hard concrete should not be removed by force.2) M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. \"Feovert\" of \"Krishna Conchem\" OR \"Roff Rust Cleaner\" of \"Pidilite\" OR \"Shali Rustoff\" of \"STP Ltd\", on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.) |
| 8 | 3) M&L for Anticorrosive Treatment to Reinforcementusing Corroseal - ZR of M/s Krishna Conchem orEpoxy Zinc Primer of M/s. Dr. Fixitby application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat.The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed. 4) M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchemas approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete& new concrete by brush application, complete all as specified and directed. |
| 9 | 5) M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit upto 40mm thickness including levelling, profiling etc in two layers,each layer not exceeding 20mm, complete all as specified and directed.6) M&L for rendering 10mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and 1 mm thick (minimum) white cement based wall care putty onold surfaces of wallsetc, finished even and smooth, complete all as specified and directed. |
| 10 | M&L for structural repairs to columns, beams, slabs and chajjas at maximum height of 16 mts including scaffolding and safety measurements completely all as specified and directed by Engineer-in-charge in following steps as mentioned below1) Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning including taking down of cement plaster and disposal of malba out side the premises etc. complete as directed. Hard concrete should not be removed by force.2) M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. \"Feovert\" of \"Krishna Conchem\" OR \"Roff Rust Cleaner\" of \"Pidilite\" OR \"Shali Rustoff\" of \"STP Ltd\", on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.) |
| 11 | 3) M&L for Anticorrosive Treatment to Reinforcementusing Corroseal - ZR of M/s Krishna Conchem orEpoxy Zinc Primer of M/s. Dr. Fixitby application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat.The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed. 4) M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchemas approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete& new concrete by brush application, complete all as specified and directed. |
| 12 | 5) M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit upto 40mm thickness including levelling, profiling etc in two layers,each layer not exceeding 20mm, complete all as specified and directed.6) M&L for rendering 5mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech including material and labour for preparation of new plastered surfaces and applying three coats of white wash complete all as specified and directed. |
| 13 | M&L as in repair for providing TMT bars any dia in various structural RCC elements like columns, beams, Slabs etc. including cutting, bending, fixing of bars with welding/ tying as required at site with & including binding wires etc. and all relevant works like anchoring of the bars in the existing RCC Members, complete all as specified and directed. |
| 14 | M&L for preparation of old plastered surfaces on walls, preparation for Acrylic emulsion and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over including necessay scaffolding upto 20mtr height and removing grass, roots of plants, dry leaves, broken branches etc at any place on bldg complete all as specified and directed. |
| 15 | M&L for complete removal of existing treatment by washing, rubbing down and stopping of old decorated surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and levelling with minimum 1 mm thick white cement based wall care putty for obtaining plain surface,including necessary scaffolding upto 10m height complete all as specified and directed. |
| 16 | M&L for Complete removal of existing treatment and preparation of plastered surfaces on walls, preparation for Acrylic emulsion and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfacesincluding necessay scaffolding upto 20mtr height and removing grass, roots of plants, dry leaves, broken branches etc at any place on bldg complete all as specified and directed. |
| 17 | M & L for preparation of old distempering surfaces including washing, rubbing down and stopping of old decorated surfaces on wallsstopping of nails holes,cracks etc. and applying one coat of oil bound distemper on wall,including necessary scaffolding upto 10m height complete all as specified. |
| 18 | Preparation of old surfaces on ceiling (plastered or unplastered or previously distempered) by washing, rubbing down and stopping of old decorated surfaces on walls and applying one coat of distemper complete all as specified. |
| 19 | M & L for preparation of old wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified. |
| 20 | M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified. |
| 21 | M&L for providing leakage/seepage proof coating by applyingprimeseal primer of Dr fixit or equivalent of M/s STP Ltd under torch dry condiiton and subsequently applying two coats of water proof decorative elastomeric coating system rain coat select system of M/s Dr fixit or equivalent of M/s STP Ltd over prepared surfaces including necessay scaffolding upto 20mtr height and removing grass, roots of plants, dry leaves, broken branches etc at any place on bldg complete all as specified and directed.Note The afore said treatment shall be got executed by the contractor from authorised applicator of the manufacturer and also necessary documents in support of the above shall be submitted by the contractor complete all as specified and directed. |
| 22 | M&L for Non-skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer 15mm thick for laying floor finishes in cement mortar 1:6 to recive tiles/stone slabs including skirting with backing coat including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris outside MD land upto requisite lead complete all as specified and directed by EIC. |
| 23 | M&L for Glazed ceramic coloured tiles in vertical surface 450x300x6-7mm thick/ 300x 450x6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (dado) including 10 mm thick back coat of cement plaster on fair faces of brick work 1:3 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris outside MD land upto requisite lead complete all as specified and directed by EIC. |
| 24 | S&F as in repairs PVC vent cowl 75/110mm bore with and including rubber ring joints, fixed to walls using clamps upto 15m height including scaffolding and all safety arrangements complete all as specified and directed. |
| 25 | S&F as in repairs 75/110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls using clamps upto 15m height including scaffolding and all safety arrangements including dismantling of old pipe any type/diaall complete all as specified and directed. |
| 26 | S&F in repairs 75/110mm bore PVC (SWR) branch piece single (Single Y/ Double Y ) any type, fixed to walls using clamps upto 15m height including scaffolding and all safety arrangements complete all as specified and directed. |
| 27 | S&F as in repairs 75/110mm bore PVC (SWR) bend any type, fixed to walls using clamps upto 15m height including scaffolding and all safety arrangementscomplete all as specified and directed. |
| 28 | S&F as in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white with integral foot rests with flush pipe of 32mm dia including 10 ltr capacity low level flushing cistern with necessary PVC connections 15mm size with PTMT nuts of length 450mm long etc complete all as specified and directed by EIC/GE. |
| 29 | S&F as in repairs vitreous China wash basin white, flat back size 550 x 400mm including 15mm dia fancy type pillar tap as approved by the GE, chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia of required length and all necessary 450mm long outlet and inlet PVC connections pipes with PTMT check nuts complete all as specified and directed by EIC. |
| 30 | S&F as in repairs vitreous china urinal half stall type (back or corner wall type ), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with discharge pipe etc complete all as specified and as directed by Engineer In Charge. |
| 31 | S&F as in repairs vitreous coloured China Europeon water closet (Pedestal Pattern)including 10 ltr capacity low level flushing cistern with necessary PVC connections 15mm size with PTMT nuts of length 450mm long etc complete all as specified and directed by EIC. |
| 32 | S&F as in repairslow level/high level PVC flushing cistern with PVC flush pipe, brackets, and PVC connection complete of 10 Ltr capacity all as specified and directed by EIC. |
| 33 | S&F as in repairs 15 mm dia Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as speicified and directed by EIC. |
| 34 | S&F as in repairs Two way Bib cock with flange 15mm dia approved by the GE complete all as specified and directed by EIC. |
| 35 | S&F as in repairs 15mm bore brass CP Stop Cock approved by the GE, complete all as specified and directed by EIC. |
| 36 | S&F as in repairs 15mm bore brass CP angle Stop valve approved by the GE, complete all as specified and directed by EIC. |
| 37 | S&F as in repairs 15mm bore brass CP Bib Tap approved by the GE, complete all as specified and directed by EIC. |
| 38 | S&F asin repairs 15mm bore brass CP Pillar Tap approved by the GE, complete all as specified and directed by EIC. |
| 39 | S&F as in repairs brass chromium plated, shower rose, 125mm size with and including 195mm long 15mm bore brass chromium plated shower arm with bend of 45 degree, complete all as specified and directed by EIC.Make: Seiko, Cera, Jaquar or equivalent approved by GE. |
| 40 | S&F as in repairs waste fitting of 32 mm borebrass, chromium plated for glazed ware wash basin etc complete all as specified and directed. |
| 41 | S&F as in repairs waste pipe for WHB 32mm bore fixed to wash hand basin coupling length pipe 0.90 mtrs each complete all as specified and directed. |
| 42 | S&F as in repairs stainless steel grating in round shape 100mm dia with one hole for waste pipe complete all as specified and directed. |
| 43 | S&F as in repairsstainless steel grating in ground shape 100mm dia without hole complete all as specified and directed. |
| 44 | S&F as in repair for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement and filling PCC 1:2:4 type B1 using 20mm graded stone aggregate with water proofing compound complete all as specified and directed by EIC.. |
| 45 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm and Supply & fixing 15 mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 46 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm and Supply & fixing 20 mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 47 | Supplying and laying as in repairs of 20mm dia CPVC pipes UV stable,leak proof, tough ,rigid , conforming to IS:15778 of SDR 11 standard., medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 48 | S&F as in repairs for 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed by EIC. |
| 49 | S&F as in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 20mm bore complete all as specified and directed by EIC. |
| 50 | S&F as in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 15 mm bore complete all as specified and directed by EIC. |
| 51 | S&F as in repairs stainless steel butt hinges, 100mm,medium weight complete all as specified and directed by EIC. |
| 52 | S&F as in repairs stainless steel butt hinges, 75mm,medium weight complete all as specified and directed by EIC. |
| 53 | S&F as in repairs aluminium, anodised, barrel tower bolts of extruded section of size 200mm complete all as specified and directed by EIC. |
| 54 | S&F as in repairs aluminium, anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed by EIC. |
| 55 | S&F as in repairs aluminium, anodised, barrel tower bolts of extruded section of size 100mm complete all as specified and directed by EIC. |
| 56 | S&F as in repairs extruded aluminium alloy handles, fabricated type of size 100mm in any position complete all as specified and directed by EIC. |
| 57 | S&F as in repairs extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed by EIC. |
| 58 | S&F as in repairs floor door stopper of aluminium alloy bodyand tongue, anodised with hard drawn steel spring of length 140mm fixed in flooretc complete all as specified and directed by EIC. |
| 59 | S&F as in repairs for Aluminium wire cloth, 0.45mm nominal dia ofwire and average width ofaperture 1.40mm and fixed with in wooden and aluminium windows, doors etc,and fixing of teak wooden beeding, aluminium patticomplete all as specified and as directed by the Engineer in charge.Note: i) The rate includes for the removal of shutter from the frame for aluminium windowsand refixing the same after fixing of wiremesh along with aluminium pattiii) The rate includes for the removal of wooden beading from the shutterand refixing the same after fixing of wire mesh in wooden door/windows |
| 60 | S&F as in repairs aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 300 mm fixed at any position all as specified and directed by EIC. |
| 61 | S&F as in repairs aluminium (Die cast body)hydraulically Door closer regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg all as specified and directed by EIC. |
| 62 | S&F as in repair fancy type decorated Stainless Steel curtain hanging rods 20 mm dia and fixed to stainless steel bracket for hanging curtain complete all as specified and directed by EIC. |
| 63 | S&F as in repairs Stainless Steel brackets having screw for tightening of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed by EIC. |
| 64 | Taking down carefully existing aluminium sliding window shutters,(glass/wire mesh) /frame not exceeding 1.5 Square Metre each |
| 65 | All as per Item above butexceeding 1.5 Square Metre and not exceeding 04 Square Metre. |
| 66 | S&F standard aluminum section powder coated in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco).Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment.Cost of other consumables required for the item shall be deemed to be included in the quoted rate.However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only.Fixing by element of these items shall be deemed to be included in quoted rate. |
| 67 | Supply only 4 to 5mm thick glass ordinary quality plain withincluding wooden/rubber beading or gasket for aluminium sectioncomplete all as specified |
| 68 | Supply only 2.50 to 3.0mm thick pin head glass withincluding wooden/rubber beading or gasket for aluminium sectioncomplete all as specified |
| 69 | S&Faluminum anodised grill DG- 104 of Deco grill or equivalent fixed with \"F\"/\"U\" section approved make all as specified and directed.Note : (i)Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE.(ii) Minimum thickness of anodizing shall be 15 microns. |
| 70 | Supply only Aluminium wire cloth, 0.45mm nominal dia ofwire and average width ofaperture 1.40mm and fixed with in wooden windows, doors etc and including M&L for fixing of teak wooden beading of suitable size all around complete all as specified and as directed by the Engineer-in-Charge. |
| 71 | Supply only new locking arrangement for aluminium windows complete all as specified and directed. |
| 72 | M&L for 12 mm thick Prelaminated particle board, interior grade, both sides with decorative choice laminations fixed with screws to aluminium sections including taking down of old boards of any type complete all as specified and directed by GE/EIC. |
| 73 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including cutting holes required fortaking out existing hold fast etc. complete all as specified and as directed. |
| 74 | All as per Item above butexceeding 1.5 Square Metre and not exceeding 04 Square Metre each complete all as specifiedand directed. |
| 75 | S&F for Solid PVC Door Frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 76 | S&F for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame madeout of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2020 complete all as specified and directed |
| 77 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account will be provided |
| 78 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 79 | M&L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed |
| 80 | S & F,1st class hardwood 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed |
| 81 | S & F 1st class hardwood, glazed and skelton shutter, 35mm thick, open rebated and prepared to receive glass, gauze etc, edges of framing plane, chamfered or rounded, fitted with cut and mitered bead for securing glass, gauze etc, size of member of shutters as specified in SSR Part -I, section 8, class 8.24(a) (Door shutter), supplied and fitted to chowkats complete all as specified and directed |
| 82 | S&F Pre- painted galvalume sheet having aluminum zinc coating with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by usingproper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fastners etc. completely all as specified and directed. upto maximum height of 20 Mtr including scaffolding and all safety equipments if required including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as specified.Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. |
| 83 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet in ridge 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified upto maximum height of 20 Mtr including scaffolding and all safety equipments if required including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as specified.Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. |
| 84 | S&F as in repairs for steel rolling shutters,1mm lath thickness without ball bearing,as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete push pull or manual type and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 85 | S&F as in repairs for steel rolling shutters,1 mm lath thickness without ball bearing,as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, gear operated type with bevel gear box and crank handle and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 86 | S&F as in repair mild steel safety lever locks with four levers for rolling shutters complete all as specified and directed |
| 87 | S&FFramed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors, Gates including Hold fast & Aldrop and related items; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 including of dismantling of old iron or mild steel work of any description complete all as specified and as directed by EIC. |
| 88 | M&L for plain Cement concrete in foundations, filling and mass concrete type B-2 1:2:4 (using 40mm graded aggregate) including demolition of old concrete below or above ground level and removal of debris outside MD land upto requisite distance complete all sa specified and directed by EIC. |
| 89 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 290 gde E-165 including of dismantling of old iron or mild steel work of any description and removing from site complete all as specified and as directed by EIC. |
| 90 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(Any Size/Capacity) |
| 91 | M&Lfor Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face |
| 92 | M & Lfor aluminium anodised suspended false ceiling fixed in the panels of size consisiting of 600x600 mm lay in tiles 8 mm thick with PVC lamination on the face side andmetalized polyester film on backside as granular pattern of saint gobain/Armstrong /equivalent; with aluminium anodised angle 30 x30 x 2 mm fixed along the wall and main and cross tees of size 31.75 x 31.75 x 1.6 mmscrewed along side of walls fixed with wooden plugs and hanging from existing slab/ steel truss including 6 mm diaGI wire suspended adjustable level from rafter purlins(length as per site requirement) including dismantling of old ceiling board any type/size and removing debris outside MD land upto requisite distance complete all as directed by Engineer-in-charge.Note :The contractor\"s quoted rates shall also be deemed to include for making/ cutting opening in the ceiling of the required size and shape for fixing light fitting, cat walk and provision of neccesary scaffolding for complete work at maximum height of 12mtrs etc, complete all as directed. |
| 93 | S&F as in repairs for PVC coated chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by EIC. |
| 94 | M & L PCC 1:3:6 type C2 using (40 mm graded aggregate) as in surface channels and drains. including demolition of cement concrete in ground floors (below or above ground level) not exceeding 15cm thicknessand removing the debris outside MD land upto requisite lead all as specified and directed |
| 95 | M&L for PCC 1:4:8 type D2 using (40mm graded aggregate) in foundations, fillings and mass concrete below ground level including demolition of old/existing concrete below ground level of any description n.exc 15cm thick and removing debris outside MD land upto requisite distance complete all as specified and directed by EIC. |
| 96 | M & Lfor brick work in CM (1:6) using sub class \"B\" bricks strainght or curved as curved as required on plan exc 6mtrs mean radius etc. including demolition of old masonry of any description and removal of debris outside MD land upto requisite distance & M & L for rendering 15 mm thick on the fair faces of brickwork or concrete surfaces in CM 1:6 including finishing the surface of top layer even and smooth complete all as specified and directed by EIC. |
| 97 | M&L for Pre-cast cementconcrete blockmasonry with solid blocks, exc. 10 cm in width andsetting CM 1:6 in mortar ,Type B1,1:3:6,(20mm gradedaggregate)including demolition of old masonry of any description and removal of debris outside MD land upto requisite distance& M & L for rendering 15 mm thick on the fair faces of brickwork or concrete surfaces in CM 1:6 including finishing the surface of top layer even and smooth complete all as specified and directed by EIC. |
| 98 | M&L for granite (of any type) work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including requisite moulding/rounding of edges including demolition of old granite of any thickness and removing debris outside MD land upto requisite distance complete all as specified and directed by EIC. |
| 99 | M&L for pre-polished Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer 15mm thick for laying floor finishes in cement mortar 1:6 to receive kota stone slabs including demolition of old kota stone of any type/size complete all as specified and directed by EIC. |
| 100 | M&L for 75mm thick cement concrete type C-2,1:3:6 (40mm graded stone aggregate) as in plinth protection ,finishing cement concrete surface even and smooth without using extra cement and spike rollong to surfaces or making impression of expanded metal,whilst the concrete is green including necessary dummy joints @1.5m spacing and filling with bitumen & necessary form work including demolition of old concrete of any description and removing debris outside MD land upto requisite distance complete all as specified and directed by EIC. |
| 101 | M& LPre Polished Chequredcement concrete tiles 30cmx 30 cm x 20 mm thick, set, jointed and pointed in near cement slurry in floors with mixture of grey white cement in equal proportions over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 including M&L for providing PCC 1:4:8 type D2 (40mm graded aggregate) as sub base 75mm thick including demolition of old concrete of any description and removing the debris outside MD land upto requisite lead & |
| 102 | M&L Machine pressed precast concrete interlocking paver block Coloured any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over and including25 mm thick sand cushion including M&L for providing PCC 1:4:8 type D2 (40mm graded aggregate) as sub base 75mm thick including demolition of old concrete of any description and removing the debris outside MD land upto requisite lead &complete all as specified |
| 103 | M&L for pre polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including backing coat of 10mm thick in CM 1:3. and jointed with with grey cement slurr mixed with pigment to match the shade of the slab including rubbing, cutting upto mirror finish and polishing complete polishing complete including dismantling/hacking out/roughening of existing old surface and removal of debris outside MD land complete all as specified and directed by EIC. |
| 104 | Note : A SUM OF RS 46080.00 TOWARDS SCHEDULE OF CREDIT SHALL BE DEDUCTED TO ARRIVE THE CONTRACT SUM |
