|
| 1 | Supply only saw dust for stop butt wall complete all as specified and directed. |
| 2 | Supply only sand for stop butt wall complete all as specified and directed. |
| 3 | Taking out old U/S mixture of saw dust and sand from site including disposing the same at low laying area and lead exc 500 mtr and n.exc 1000 mtrs complete all as specified and directed. |
| 4 | Laying and mixing mixture of sand and saw dust as per item No 01 & 02 here-in-before and filling and ramming upto depth/heightexc 2 feet and n.exc 5 feet complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site to at any distance outside MD landcomplete all as specified and directed. |
| 6 | M&L for75 mm thick Plain Cement Concrete1:4:8type D 2 (using 40mm graded stone aggregate)as in sub base of flooring/ hard standing complete all as specified and directed. |
| 7 | M&L for75 mm thick Plain Cement Concrete1:3:6type C2 (using 40mm graded stone aggregate)as in sub base of flooring/ hard standing complete all as specified and directed. |
| 8 | M&L for footpath tiles of size 300 x 300 mm and 8-10mm thick of any colour and laid over 15mm thick screed bed in CM 1:4 and joited with grey cement slurry and joints shall be filled with white cement mixed to match the shade of the tiles complete all as specified and directed. Note : Screed bed to be measured and paid separately. |
| 9 | M&L for Screed bed or bedding layer of 15 mm thick in cement mortar 1:4for laying floor finishes complete all as specified and directed. |
| 10 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 11 | M&L for PCC 1:2:4 type B2, (using 40 mm graded stone aggregate) 50 mm thick as in floors/hard standing etc laid in alternate panel and finished the cement concrete surface even and smooth without using extra cement complete all as specified and directed.Note:- Flooring shall be laid in alternate panel. |
| 12 | M&L for 75 mm thick plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in plinth protection complete all as specified and directed. |
| 13 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 14 | M&L for brick work with subclass \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 15 | Taking down cement plaster from walls, any description including racking out joints, hacking for keys,scrubbing down with water etc to receive new plaster complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick in cement mortar 1:4 on brick or concrete surfaces and finished the surfaces even and fair complete all as specified and directed. |
| 17 | M&L for preparation of newly plastered surfaces of walls and applying acrylic based Weather Coat exterior grade emulsion, two coats, in camouflage pattern, any tinted over a coat ofsuitable primer including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 18 | M&L for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat exterior emulsion paint 100% acrylic, in camouflage pattern, any tinted, including washing floors, cleaning glass, joinery,electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 19 | Demolition of reinforcedcement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed. |
| 20 | M&L for Precast RCC(1:2:4), nominal mix, Type B-1 uising 20 mm gradedstone aggregate as in cover slab of drain etc set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement shall be measured and paid seperately |
| 21 | M&L for Mild steel TMT bars 6 to 8 mm dia as in reinforcement cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 22 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 23 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
