|
| 1 | M&L for Brickwork with fly ash bricks, straight or curvedon plan exc 6m mean radius, built in CM 1:6 including demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles etc complete all as specified and directed. |
| 2 | (a)Taking down cement plaster and clean the surface of wall for treatment by removing dust, dirt and loose particles over the surface etc by mechanical means.(b)Providing & applying the water based silicon water replellent and injection system confirming IS 2645-2003 with solid content 35% and silica content 18%.It shall be mixed with water as per surface like concrete surface 1:10 and brick/block work 1:10 as per manufacturer\"s specifications.(c)Providing & applying one coat of modified cementitious bonding agent/waterproofing coating treatement over the treated area of water repellent mixed with 1 part Cement and 1 part Latex SBR/Bond SBR.(d)Providing & laying polymer WPC compound and fiber based ready mix plaster of average 15mm thick to the walls mixed with cement mortar (1:4) admixture with an integral waterproofing compound confirm to IS 2645 @ 200ml per 50 Kg cement as per manufacturer\"s specifications. |
| 3 | (a)Taking down cement plaster and clean the surface of wall for treatment by removing dust, dirt and loose particles over the surface etc by mechanical means.(b)Providing & applying the water based silicon water repellent and injection system confirming IS 2645-2003 with solid content 35% and silica content 18%.It shall be mixed with water as per surface like concrete surface 1:10 and brick/block work 1:10 as per manufacturer\"s specifications.(c)Providing & applying one coat of modified cementitious bonding agent/waterproofing coating treatement over the treated area of water repellent mixed with 1 part Cement and 1 part Latex SBR/Bond SBR.(d)Providing & laying polymer and fiber based ready mix plaster of average 15mm thick to the walls mixed with cement mortar (1:6) admixture with an integral waterproofing compound confirm to IS 2645. |
| 4 | (a)Providing & applying the water based silicon water repellent and injection system confirming IS 2645-2003 with solid content 35% and silica content 18%.It shall be mixed with water as per surface like concrete surface 1:10 and brick/block work 1:10 as per manufacturer\"s specifications.(b)Providing & applying one coat of modified cementitious bonding agent/waterproofing coating treatement over the treated area of water repellent mixed with 1 part Cement and 1 part Latex SBR/Bond SBR.(c) Providing & laying polymer WPC compound and fiber based ready mix plaster of average 15mm thick to the walls mixed with cement mortar (1:4) admixture with an integral waterproofing compound confirm to IS 2645 @ 200ml per 50 Kg cement as per manufacturer\"s specifications. |
| 5 | (a)Providing & applying the water based silicon water repellent and injection system confirming IS 2645-2003 with solid content 35% and silica content 18%.It shall be mixed with water as per surface like concrete surface 1:10 and brick/block work 1:10 as per manufacturer\"s specifications.(b)Providing & applying one coat of modified cementitious bonding agent/waterproofing coating treatement over the treated area of water repellent mixed with 1 part Cement and 1 part Latex SBR/Bond SBR.(c)Providing & laying polymer and fiber based ready mix plaster of average 15mm thick to the walls mixed with cement mortar (1:6) admixture confirm to IS 2645. |
| 6 | Taking up or down steel tubing & connection 15 mm bore including S & F for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 7 | Taking up or down steel tubing & connection 20 mm bore including S & F for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 8 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 9 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 10 | M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of mortar 1:6etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of floor, hearth or wall tiling including cement mortar bedding (including backing coat) complete all as specified and directed. |
| 11 | M & L for glazed ceramic tiles of size 300x200x7mm thick as on vertical surfaces such as skirting/dados etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles over and including 10mm thick backing coat in CM (1:4)including dismantling of floor, hearth or wall tiling including cement mortar bedding (including backing coat) complete all as specified and directed. |
| 12 | M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of mortar 1:6etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding dismantling of floor, hearth or wall tiling including cement mortar bedding (including backing coat) complete all as specified and directed. |
| 13 | M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm as in vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) including dismantling of floor, hearth or wall tiling including cement mortar bedding (including backing coat) complete all as specified and directed |
| 14 | M&L for coloured glazed ceramic tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10mm thick backing coat in CM (1:4)including dismantling of floor, hearth or wall tiling including cement mortar bedding (including backing coat) complete all as specified and directed. |
| 15 | M & L forvitrified tiles 10mm thick light shade square shape polished, area of each tiles n. exc 0.36 sqm in floors etc set and jointed in neat cement slurryand pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6including dismantling of floor, hearth or wall tiling including cement mortar bedding (including backing coat) complete all as specified and directed. |
| 16 | M & L forvitrified tiles 10mm thick light shade square shape polished, area of each tiles n. exc 0.36 sqm on vertical surfaces such as skirting/dados etc over and including 10mm thick backing coat in CM 1:4including dismantling of floor, hearth or wall tiling including cement mortar bedding (including backing coat)complete all as specified and directed. |
| 17 | Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 18 | M & L for 18-20mm thick granite work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing complete over and including 20mm thick screed bed and bedding layer of mortar for laying floor finishes with (1:6) cement mortar complete all as specified and directed. |
| 19 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and directed. |
| 20 | M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20mm thick screed bed or bedding layer of mortar for laying floor finishes with cement mortar 1:6 complete all as specified and directed. |
| 21 | M&L for machine cut kota stone slab flooring 18-20mm thick in riser to step, skirting, dado, pillar etc and laid over 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed. |
| 22 | S&F 4mm thick Non asbestos fibre cement building boards fixed in GI frame work as in ceiling, flat or sloppy as per manufacturer\"s instructions including dismantling wall and ceiling boards any thickness including cover fillets etc complete all as specified and directed |
| 23 | M&L for preparation of new ceiling surfacesand applying three coats of white wash complete all as specified and directed. |
| 24 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated, semicurrugated, etc) sheets in roof coverings complete all as specified and directed. |
| 25 | S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated, semicurrugated, etc) sheets in roof coverings complete all as specified and directed. |
| 26 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 27 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weldingtubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 28 | S&F rolled mild steel in joist, channel, angle or tee sections, circular tubes fixed independently as in post, pillars stanchions etc (Fe-290 Gde E165) complete including cutting , grinding, welding etc as required complete all as specified and as directed. |
| 29 | S&F framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging orsliding with and including either hook and hinges or steel hanging door fitting etc with welded, riveted or bolted of Fe-410 Gde-250A complete all as specified and as directed. |
| 30 | M & L for preparation of new steel surface of any description over 10cm width and girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 31 | S & F in repair suspendedfalse ceiling with \"E\" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clipscomplete all as specified and directed. |
| 32 | Ditto all as above Item No 31 but excluding snap grid complete all as specified and directed. |
| 33 | M & L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in floors and finishing the surface even and smooth using extra cement complete all as specified and directed. |
| 34 | Supply only Glass dividing strips 3mm thick and 38mm width inserted in position complete all as specified and directed. |
| 35 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 36 | S & F in repairfor Bib taps 15mm bore, brass chromium plated, fancy type, screwed down high pressure with crutchor butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 37 | S & F in repairfor CP Pillar taps fancy type15mm brass with capsten head chromium plated, screwed down high pressure with or without lettred \"hot or cold\" water long screwed both ends for iron pipe complete all as specified and directed. |
| 38 | S & F in repairfor CP stop/angle valves fancy type chromium plated 15mm bore brass, screwed down high pressure with crutch orbutterfly handle screwed both ends for iron pipes or for unioncomplete all as specified and directed. |
| 39 | S & F in repairs two way cock/two way angle cock with wall flange matt chrome finish complete all as specified and directed. |
| 40 | Supply and fixing in repairfor 15mm bore CP central hole basin mixer for mixing hot & cold water in WHB mixer complete all as specified and directed. |
| 41 | Supply and fixing in repair 15mm borefor CP wallmixer for mixing hot or cold water screwed downiron pipes complete all as specified and directed. |
| 42 | S & F in repair 15mm bore concealedstop valvesbrass, chromium plated long shank, with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 43 | S & F in repair 20mm bore gate valves with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 44 | S & F in repairBrass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections includingnecessary packing, union and cap and fixed of 32mm complete all as specified and directed. |
| 45 | S & F in repair Brass spindle for Bib cock/stop cock complete all as specified and directed. |
| 46 | S & F in repair Brass spindle for fancy type Bib cock/stop cockcomplete all as specified and directed. |
| 47 | S & F in repair Brass spindle for concealed stop cock complete all as specified and directed. |
| 48 | S & F in repair PVC low level flushing cistern 10 ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and directed. |
| 49 | S & F in repair PVC Syphon Kit with complete fittings for low level flushing cistern complete all as specified and directed. |
| 50 | S & F in repair Bib taps 15mmstandard of PTMT any colour, high pressure, screwed for iron pipe and fixed (Min wt-15mm-90gms) complete all as specified and directed. |
| 51 | S & F in repair Glass corner shelf fancy type 250x250 and 5.50mm thick fixed its chromium plated bracket guard and railing complete all as specified and directed. |
| 52 | S & F in repairSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed. |
| 53 | S & F in repairs PVC connection pipe 15mm bore with PTMT nuts of 450mm long complete all as specified and directed. |
| 54 | S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 55 | S & F in repairs swivel CP shower rose with long arm 125 mm dia complete all as specified and directed. |
| 56 | S & F in repairs WHB vitreous china, white, flat back, size 550x400mm incl brackets, waste coupling and waste pipe complete all as specified and directed. |
| 57 | S & F in repair vitreous china Water closet pedestal pattern with seat cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc complete all as specified and directed. |
| 58 | S & F in repair EWC vitreous china padestal pattern Anglo Indian with seat cover white including Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc, complete all as specified and directed. |
| 59 | S & F in repair vitreous china squatting pan Orissa pattern long pan size 580 x 440mmwith CI traplong neck 100mm with integral foot rest & fixing incl making good floor to match complete all as specified and directed. |
| 60 | S&F in repair vitreous china bowl type urinal flat back size of 465x355x265mm white with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1: 4 complete all as specified and as directed. |
| 61 | S & F in repair kitchen sink with drainage board made out of stainless steel 1mm thick with plug washer waste coupling waste pipe incl bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 62 | S & F in repair stainless steel kitchen plate rack made out of 0.80mm thick stainless steel sheet of size 900mm x 600mm x 250mm of approved pattern complete all as specified and directed |
| 63 | S & F in repair PVC coloured bath cabinet overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed. |
| 64 | M & L for providing precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slab set in CM 1:4 including necessary form work and demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to faciliate demolition) complete all as specified and directed. |
| 65 | S & F mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 66 | S & F in repair waste pipe 32mm for WHB & sink complete all as specified and directed. |
| 67 | S & F in repair hand shower (health faucet) with 1mtr flexible tube with hot and cold water supply wall hook, bracket etc complete set of superior quality complete all as specified and directed. |
| 68 | S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 69 | S & F in repair 600x450mm bevelled edge mirror of fancy type selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 70 | Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5sqm but n. exc 4.0sqm each complete all as specified and directed. |
| 71 | Taking down chowkhat with shutter (without taking off shutter from the frame) area n. exc 1.5sqm each complete all as specified and directed. |
| 72 | Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed. |
| 73 | Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting from the face of jamb/wall exc half brick but n. exc one brick complete all as specified and directed. |
| 74 | M & L for PCC type B-1 (1:2:4) 20mm graded aggregate as in concrete for fixing hold fasts for bed blocks etc complete all as specified and directed. |
| 75 | M & L plain cement concrete (1:2:4), type B1 using 20mm graded stone aggregate as in coping including necessary form work complete all as specified and directed. |
| 76 | S & F Bands, straps, supports or stays for rain water ventilating pipes including bolts if required, hooks for large gates, hook and pintel hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, palin angle cleat for securing purlinto wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 77 | S & F Second class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed |
| 78 | S & F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 79 | S&F solid PVC door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed. |
| 80 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed |
| 81 | S & F Rubber beading size 65x5mm for doors complete all as specified and directed. |
| 82 | S & F in repair 18/19mm thickBlock boards, grade 2 quality ,interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed. |
| 83 | S & F 0.9 mm thick sunmica/laminator with decorative lamination fixed with synthetic Glue / Adhesive to timber frame/wood work, edge chamferedcomplete all as specified and directed. |
| 84 | S & F 30 mm width of flaps continuous piano hinges MS bright finish are electroglavanised complete all as specified and directed. |
| 85 | S & F mild steel butt hinges 100mm size medium weight and fixed complete all as specified and directed. |
| 86 | S & F stainless steel butt hinges 100mm size medium weight and fixed complete all as specified and directed. |
| 87 | S & F 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 88 | S & F butt hinges 75 mm mild steel hinges medium weight and fixed complete all as specified and directed. |
| 89 | S & F 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed. |
| 90 | S & F 150mm size aluminium handle, fabricated type anodised, ISI markedcomplete all as specified and directed. |
| 91 | S & F aluminiumanodized barrel tower bolts 200 mm of extruded section all as specified and directed. |
| 92 | S & F 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed |
| 93 | M & L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 94 | S & F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position including dismantling of existing water tanks of capacity exc 250 & n. exc 500 ltr complete all as specified and directed. |
| 95 | S & F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position including dismantling of existing water tanks of capacity exc 500 & n. exc 1000 ltr complete all as specified and directed. |
| 96 | S & F in repair PVC tank cover with locking arrangement for 500 / 1000 ltrs water tank complete all as specified and directed. |
| 97 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltrs etc complete all as specified and directed. |
| 98 | S & F in repair 15mm dia ball valve high pressure, of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed. |
| 99 | S & F in repair 20mm dia ball valve high pressure, of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed. |
| 100 | S & F 110mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall including taking down eaves gutters and rain waterpipes any size or pattern including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed. |
| 101 | S & F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall including taking down eaves gutters and rain waterpipes any size or pattern including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed. |
| 102 | S & F PVC(SWR) bends 110mm dia complete all as specified and directed. |
| 103 | S & F PVC(SWR) bends 75 mm dia complete all as specified and directed. |
| 104 | S & F in repairs CP tubular towel rod, 20mm dia, \"D\" type, 60cm long between flange complete all as specified and directed. |
| 105 | S & F in repair 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed. |
| 106 | S & F in repair 40 mm bore Brass chromium plated Waste coupling for kitchen sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed. |
| 107 | S & F in repair 25mm diafancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed. |
| 108 | S & F in repair steel Soap dish CP any size complete all as specified and directed. |
| 109 | S & F in repair stainless steel grating doom 100mm dia complete all as specified and as directed. |
| 110 | S & F in repair 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) complete all as specified and directed. |
| 111 | S & F in repair 100mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints and fixed to walls complete all as specified and directed. |
| 112 | S & F in repair 75mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints and fixed to walls complete all as specified and directed. |
| 113 | S & F cast iron bends (any radius) diminishing pieces or tapers for 100mm dia complete all as specified and as directed. |
| 114 | S & F cast iron bends (any radius) diminishing pieces or tapers for 75mm dia complete all as specified and as directed. |
| 115 | S & F cast irondoor bends (any radius) ovel access door diminishing pieces or tapers for 75mm dia complete all as specified and as directed. |
| 116 | S & F cast irondoor bends (any radius) ovel access door diminishing pieces or tapers for 100mm dia complete all as specified and as directed. |
| 117 | S & F in repair 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed |
| 118 | S & F in repair 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed. |
| 119 | S & F in repair 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed. |
| 120 | S & F in repair 200mm aluminiumanodized barrel tower bolts of extruded section all as specified and directed. |
| 121 | S & F in repair plain Aluminium sheet 0.56mm thick fixed with nails to wooden shutters complete all as specified and directed. |
| 122 | S & F in repair 150mm aluminiumanodized barrel tower bolts of extruded section all as specified and directed. |
| 123 | S & F in repair 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 124 | S & F in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 125 | S & F in repair Aluminium floor door stopper two lagged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed. |
| 126 | S & F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller or roller plate complete all as specified and directed. |
| 127 | S & F 3mm thick plain sheet glass ordinary quality incl glazing with putty area n.exc 0.5 sqm in each pane including hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and providing complete all as specified and directed. |
| 128 | S & F in repair Aluminium (die cast) body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 129 | Complete removal of existing treatment and applying two coats of oil bound distemper over a coat of birla putty complete all as specified and directed. |
| 130 | M & L applying two coats of oil bound distemper over a coat of birla putty including preparation of newly plastered untreated surface complete all as specified and directed. |
| 131 | M & L for preparation of old treated surface of wall/roof including facia, cornices etc and applying a coat of weather proof exterior emulsion paintcomplete all as specified and directed. |
| 132 | M& L for painting building number plate with background using black synthetic enamel paint and building number with white synthetic enamel paint, overall area of plaque exc 0.1 sqm but n. exc 0.4 sqm each complete all as specified and directed. |
| 133 | M & L for preparation of new plastered surfaces of wall and applying three coatsof white wash complete all as specified and directed. |
| 134 | M & L for prepration of old treated surface of wall and applying one coat ofwhite wash completeall as specified and directed. |
| 135 | M & L for prepration of old treated surface of wall and applying two coat ofwhite wash completeall as specified and directed. |
| 136 | M & L for prepration of old treated surface of ceiling and applying one coat ofwhite wash completeall as specified and directed. |
| 137 | M & L for prepration of old treated surface of ceiling and applying two coat ofwhite wash completeall as specified and directed. |
| 138 | M & L for preparation old treated surface of wall and applyingone coats of cement base paint complete all as specified and directed. |
| 139 | M & L for preparation old treated surface of wall and applyingtwo coats of cement base paint complete all as specified and directed. |
| 140 | M & L for preparation of old treated surface of wall and applying one coat of oil bound distemper complete all as specified and directed. |
| 141 | M & L for preparation of old treated surface of wall and applying two coat of oil bound distemper complete all as specified and directed. |
| 142 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 143 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 144 | M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed. |
| 145 | M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamelled paint complete all as specified and directed. |
| 146 | Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying 2mm thick wall care putty over prepared surface to achieve thesurface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & Fungal rsistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed .Note : Primer & acrylic emulsion to be carried out through air less spray machine (Mechanical means) and maximum height upto 25 mtr and rate included necessary scaffolding. |
| 147 | Material and Labour for complete removal of existing treatment of wall surface with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying minimum 2mm thick wall care putty over prepared surface to achieve surface even and smooth and applying two coats of plastic emulsion paint including primer on surfaces of walls complete all as specified and directed. Note : Plastic emulsion paint to be applied through mechanical means only on wall surfaces and maximum height of wall upto 8mtr. |
| 148 | M & L for preparation of old floor surface of chequered cement concrete tile /kerb stone surfaces, facias, cornices etc by completeremoving all scale, loose material dust etc and applying one coats of weather proof anti fungal (Apex) paint as per manufacturers instruction complete all as specified and directed |
