|
| 1 | M&L for brick work using fly ash brick conforming toIS-12894:2002,size , straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6)including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete,all as specified and directed |
| 2 | Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete. |
| 3 | M&L 15 mm thick rendering in CM (1:6 ) onstone masonry surfaces or surface other than fair face of brick-work or on one side of lathing incl finished even and smooth (without using extra lime or cement all as specified. |
| 4 | M&L 15 mm thick rendering in CM (1:4 ) onstone masonry surfaces or surface other than fair face of brick-work or on one side of lathing incl finished even and fair complete all as specified. |
| 5 | Raking out joints/ pointing to squared rubble masonry, coursed or uncoursed in cement mortar or cement lime mortar including M&L Keyed pointing to random or polygonal rubble, uncoursed or brought upto coursein cement mortar 1:4,complete all as specified. |
| 6 | M&L preparation surfaces plastered or unplasterd surface of walls andapplying three coats of whitewash on wall complete all as specified. |
| 7 | Preparation of old surfaceincluding brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of whitewash on wall complete all as specified. |
| 8 | M&L preparation of new plastered surface of wallsand applying two coat of cement based paint over priming plastered and other surfaces with alkaliresistant priming paint complete. |
| 9 | M&L preparation of stone surface / unplastered surface of wallsand applying two coat of cement based paint complete all as specified. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 11 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 12 | M&L 0.80 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 13 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings. |
| 14 | M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed. |
| 15 | M & L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified& directed. |
| 16 | M&L MS framed work as in truss, purlin or rafter of angle iron including distance pieces cleats etc of Fe 410-w(Gde E-250) qualities complete all as specified and directed |
| 17 | Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified. |
| 18 | Preparation of old treated steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paintcomplete all as specified. |
| 19 | M&L applying two coat of synthetic enamel painting of steel and iron surfaces of small articles such as metal switch blocks, metal ceiling roses, articles of builder\"s hardware such as door springs, hooks, knobs, fasteners, stays, locks, latches, etc., straps to roof trusses, gates and similar articles, when unconnected with other painting or when painted in a different tint complete all as specified. |
| 20 | S&F expanded metal, n.exc 4.00 kg cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified. |
| 21 | S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 |
| 22 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 23 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. |
| 24 | S&F 110 mm dia PVC (SWR) bends complete all as specified. |
| 25 | M&L PQC as in cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre,thickness of concrete 25 cm or less including necessary form work and finishing surface of concrete roads, pavements, by brooming complete all as specified. |
| 26 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade\"A\" complete all as specified. |
| 27 | Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade\"A\". |
| 28 | M&L cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and faircomplete all as specified. |
| 29 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles. |
| 30 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified. |
| 31 | Dismantling wrought iron or mild steel work of any description not otherwise provided including demoliton of emedded portion cement concrete of complete all as specified. |
| 32 | Dismantling fencing wire mesh, any type |
| 33 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified. |
| 34 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire |
| 35 | S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 36 | M & L for angle posts and struts in fencing including cutting tops to shape as directed drilling holes notching for hole including necessary drilling bilting or rivetting complete or forged into spikes framed guards bars including one coat red oxide and applying two coat synthetic enamel paint including complete all as specified and directed. |
| 37 | Fixing onlyfor angle posts and struts in fencing including cutting tops to shape as directed drilling holes notching for hole including necessary drilling bilting or rivetting complete or forged into spikes framed guards bars complete all as specified and directed.Note- Angle post will be reused obtained from demolition/dismanteling. |
| 38 | S & F mild steel screw bolts (machine made ) with hexagonal or square heads of diametre of neck 16-20mm and lentgh of bolt exc 5 CM but n.exc 10 CM long, bolt with waher and nuts all as specified and direced. |
| 39 | Excavation in trenches soft loose soil not exc 1.5 m wide and not exc 1.5m in depth for foundation etc and getting out complete all as specified. |
| 40 | M&L Cement concrete in foundation 1:4:8 type D-2 , 40 mm graded stone aggregate as in sub base of foundation, filling and mass concrete complete all as specified. |
| 41 | M&L Squared rubble walling Jodhpur type,regular coursed, well bonded, bedded and solidly hearted, built in CM1:4 complete all as specified. |
| 42 | All as item No-13 above but exept stone masonary complete all as specified.Note- item reused obtained from demolition |
| 43 | M&L rendering 15mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing fair & rough in cm 1:4 complete all as specified. |
| 44 | M&L Providing, cement concrete type B-0,1:2:4 (12.50mm graded aggregate )in roof kerbs as inlintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not providedfor in Item 04028, water troughs and the like including weathering, slightly roundedor chamfered angles and throating, as directed |
| 45 | S&F Dressed stone slabs as in coping,window cill etc of stone slab 25 mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints;exposed edges rounded or chamfered as directed, set, jointed and pointed laid over 15 mm thick screed bed bedding layersincement mortar 1:6 complete all as specified. |
| 46 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm soft/loose soil. |
| 47 | Removing excavated material/soil not exeeding 50 meater and deposting where directed at a level n. exc 1.5 M above the starting point. |
| 48 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete |
| 49 | Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 50 | M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregateas in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as spcefied and directed |
| 51 | S & F for MSTMT bars 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips . |
| 52 | Preparing old surfaces of steel or iron work of any description and girth over 10cmand applying two coats of synthetic enamel paintcomplete all as specified andas directed by Engineer incharge. |
| 53 | Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpaperingand M&L two coats of cement base painton new plastered surfaces all as directed by Engr in charge. |
| 54 | S&F 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rendering 10mm thick backing coat on fair faces of brick work or concrete surfaces to received the granite complete all as specified. |
| 55 | Taking down carefully aluminum/copper point wiring (light/fan/ socket/ power) complete including fittings such as switch, socket, ceiling roses light fittings etc andand making good disturbed surface of wall all as specified and directed by Engineer-in-Charge. |
| 56 | Material and labour for point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC FRLSH insulated sheathed 1100 Volt grade cable in and incl PVC FRLSH CONCEALED CONDUIT PIPE (ISI Marked) with all accessories including new pressed steel terminal boxes (sunk in wall ) with 3.00 mm thick plastic laminated sheet top cover or PVC FRLSH board including PVC FRLSH top cover with 1.50 sq mm insulated unsheathed PVC FRLSH multistranded covered copper conductor for common earth and connecting to earth dolly and making good disturbed surface of wall incl matching the colour of wall/ceiling with extisting wall/ceiling colour all as specified and directed forOne light/exhaust/ceiling fan/Bell point controlled by one switch one way |
| 57 | All as per item Ser No 56aboveone socket out let 5 Amps 3 Pin on same board with other switch |
| 58 | All as per item Ser No 56 aboveone socket out let 5 Amps 5 pin on independent board |
| 59 | All as per item No 56 here in before but with single core multistranded cable of size 4 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 4 Sq mm all as specified and directed |
| 60 | Supply and fixingPiano type switch5 Amps one way. |
| 61 | Supply and fixing socket out let 2 in 1 multi pin 5 Amps flush type universal. |
| 62 | Supply and fixing switch piano15/16 Ampsone way 240 volts |
| 63 | Supply and fixingt socket outlet in repair 2 in 1, 3 pin, 5 and 15 Amps socket outlet 240 volts SP |
| 64 | Supply and fixingCeiling rose on PVC FRLSH board size 65 X 50 mmthree terminal Complete. |
| 65 | Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 66 | Supply and fixing LED Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 67 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP67 protection, with impact and corrosion resistant complete with driver and lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 68 | Taking down old sub main wiring and M&L for concealed sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : Tworun of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cableincuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces. |
| 69 | S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way (Concealed flush to wall), 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Note : 1.Blank plates will be included on the quoted rates.2. All wires to be properly connected with copper lugs.3.MCB will be measured and paid separately. |
| 70 | S&F in replacement of TPN DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way (Concealed flush to wall), 415 volts with bus bar rating 250 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directe d.Note : 1.Blank plates will be included on the quoted rates.2. All wires to be properly connected with copper lugs.3.MCB will be measured and paid separately. |
| 71 | Supply and fixingin replacement MCB TPN, 63 Amp, C Curve10 KA ISI Marked Complete with connection testing and commissionin |
| 72 | Supply and fixing in repair 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 73 | Supply and fixing MCB SPN, 63 Amp, C Curve 240 volts. |
| 74 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 75 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core |
| 76 | Supplying and laying (length perpendicular to axis of cable) un-reinforced precast concrete cable cover,ISI marked ,class LT, type 1, size 250mm x 150mm x 40mmduly embossed with \"LT Cable 1100 Volts, cable size inSQMM\" allas specified and as directed. |
| 77 | M & L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15 cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part I and as directed. |
| 78 | Supply and lay 50 mm bore galvanised steel tubing Light grade with all fittings and fixtures laid in trench or ceiling or laying in floors complete all as directed. |
| 79 | Supply and fix exhaust fan ,steel body AC single. 230V of size 450 mm sweep heavy duty with blades and frame and louvers complete all as specified and directed by engineer-in-charge. |
