Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 2 | Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed. |
| 3 | M&L 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregateas bedding of tiles/Kota stone and padding or levelling courseall as specified and directed at sitecomplete all as specified and directed.Note : Bedding or Padding to roofwill be provide where require as directed by EIC |
| 4 | M&L for Stone slab ( Jodhpur stone) 50 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in plinth protection,etc., punched dressed on exposed faces/edges rounded or chamfered and self faced other sideembedded orbedded onPCCbeds set, jointed and pointed in cementmortar 1:4complete all as spd as directed |
| 5 | M&L for joint free, Vitrified Ceramic tiles of light shed10 mm thick (square/rectangular) polished , area of each tile exc 0.42 but n.exc 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 6 | All as per item here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4,complete all as specified and as directed. |
| 7 | M&L for non skid ceramic colored tiles , 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqmas in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 8 | M&L for ceramic colour tiles in vertical surface of size 350 X 250 x 7/450x300x7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed. |
| 9 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed. |
| 10 | All as per item No. 09here-in-above but not exc 1.5 sqm each complete all as specified and as directed. |
| 11 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension,including 6 mm thick full length fancy type toughned glass,EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 12 | Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, including 6 mm thick full length toughned glass, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall becceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 13 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. including 6 mm toughned full length fancy type glass andwiremesh of 0.56 mm in nominal dia of wire average width of aperture 1.18 mm,Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 14 | S&F powder coated ( minimum thickness of powder coating not less than 50 micron) aluminium window shutter (three shutter) sliding type with frame of powder coated aluminium channelsectionsuitable for sliding aluminium shutters weighing 0.55Kg/M of three channel including necessary joining cleats glazing clips rubber packing Powder coatedaluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter withwiremesh of 0.56 mm in nominal dia of wire average width of aperture 1.18 mm, including necessary locking arrangement and handle etc; as specified etccomplete all as specified and directed. |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fastenersincl in this item of required dia and length complete as per direction of Engineer-in-Charge. |
| 16 | M&L 30mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fie again of the shall be as per manufacture instruction complete all as specified and complete all as specified and complete all as specified and directed. |
| 17 | Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova 80 to 100mm thick mud phuska/cement concrete/lime coba /brick layer etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed. |
| 18 | M&L of water proofing treatment to non-accessibleroof slabwith APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3kg/Sqm as per manufacturer’s instructions laidwith torch application complete all as specified and directed by Engineer-in-Charge with following course of description below:-(a) 10 mm thick plaster in CM 1:4 with WPC (liquid water proofing compound @ 0.20 Ltr/bags(50 Kg Bag))will be applied over the roof slab (subjected to condition as mentioned in notes) . After the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/sqcm using cement based grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment. (b) the surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimney stacks, etc. and other similar situation to ease up about corners.(c) Bitumious based primer confiorming to IS: 3384 @ 0.3 kg/Sqm to be applied on prepared surface, till the surface is propely impregnated. (d) After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer\"s instruction. The overlap while toching shall be 100mm in longitudinal direction and 100 mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer.(e) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.(f) after apllication of APP membrane with a layer of blown grade bitumen of any penetration applied hot @ 1.7Kg per Sqm blinded with grit or pea size gravel @ 0.006 cum per Sqm and lightly tamperedNote :The cost of all items i.e. from Sr No. (a) to Sr No.(f) are included in quoted rate and no separate payment will be done for the above except liquid WPC. |
| 19 | Supply only liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as specified and directed. Make : Dr Fixit LW+ |
| 20 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregateheat resisting granolithic concreteusing WPC as per manufacturer over APP memberane with panels not exceeding 2 Sqm as dummy contraction joint 2mm deepx 10mm wide filled with sealing compound etccomplete all as specified and directed.Note :- The rate for Dummy contraction joint on granolithic concrete includingfilling sealing compoundand WPC shall be included in this item. |
| 21 | S&F of ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall with Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 22 | S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 23 | S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall with Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof including taking down of eaves gutter and rain / waste water pipes including all fittings any size and patterncomplete all as specified and directed. |
| 24 | S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floorsincluding taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 25 | S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 26 | S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 27 | S&F 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal, complete all as specified and directed. |
| 28 | S&F 75 mm bore PVC (SWR) junction single (Single `T\") equal or unequal, complete all as specified and directed. |
| 29 | S&F PVC (SWR) vent cowl 110 mm bore, jointing to waste pipe, complete all as specified and directed. |
| 30 | S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed. |
| 31 | S&F in repairPVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 32 | S & F 15 mm bore Galvanized Steel tubes, medium gradefixed to walls and ceilings or laid in floors, concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed |
| 33 | S & F 20 mm bore Galvanized Steel tubes, medium gradefixed to walls and ceilings or laid in floors,concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed |
| 34 | M & L25 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws,including designer edge binding tape of required width, including dismantling of old cupboard boarding of any description all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately) |
| 35 | M & L18 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including designer edge binding tape of required width,including dismantling of old cupboard boarding of any description all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately) |
| 36 | S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 40 mm, complete all as specified and directed |
| 37 | S & F brass drawer/shutter handles fancy type , projection drop (50mm to 65mm) on screwed platey complete all as specified and directed |
| 38 | Supply and fixglass sliding shutter for Showcase /Barusing 5.5 mm transparentthoughned glass , aluminium two track rail all around the glass fixed with SS screw, includingS S roller assembly for movement of glass shutter ,including all necessary accessorries required for horizontal movement of two track glass shutter complete all as specified and directed |
| 39 | S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed. |
| 40 | S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as specified and directed. |
| 41 | S & F in repairs 20 mm bore Gun-metal, ISI,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 42 | S & F in repairs 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 43 | S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified and directed. |
| 44 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as directed. |
| 45 | S&F in replacement of premium quality corner glass shelf 300 mm with Chromium plated bracket guard and railing and fixing accessories, complete all as directed. |
| 46 | M&L in repair for Aluminium anodisedcurtain rod25mm diawith fancy caps/lobs and wall mounting bracket cuttingin to length requiredat sitecomplete all as specified and directed by Eng-In-ChargeNote: Bracket and end caps/lobs are included in quoted rate. |
| 47 | S & F in repair chromium plated shower rose 150 mm size fancy type with or without swivel joints, any size, including fixing tosteel pipe or union |
| 48 | S&F in replacement of 1st quality handshower (health faucet) with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. |
| 49 | S&F in replacement of 3-in-1 wall mixer 1st qualitywith provision for overhead Shower with 115mm long bend pipe on upperside, connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as directed. |
| 50 | S&F in repair vitreous china table top wash basin (1st quality)white or off white, flat back, including single lever extended body swan neck basin mixer pillar tap suitable for table top wash basin , CP waste copling and CP bottle trap complete all as approved by Engr-in-charge and directed. Notes: Swan Neck Pillar Tap, Bottle Trap, Waste coupling , connection pipe, outlet pupe are included in quoted rate. |
| 51 | Supply & Fix in repairs Vitreous China wash down water closet pan (single unit, means one piece), EWC, wall mounted/hung, white or off white coloured including concealed flushing cistern system & matching coloured seat covered fixed, complete all as approved by Engr-in-charge and directed. |
| 52 | S&F in replacement of CP towel rail 600 mm long fancy type withwall bracket made of cast copper alloy, chromium plated, complete all as directed. |
| 53 | S&F of 600x450 mm size and 4mm thick beveled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and directed. |
| 54 | S&F in replacement of1st quality PVC multipurpose cabinet mirror having inbuilt shelf to accommodate daily routine items with front openable door of overall size 350 x 450 mm, complete all as specified and directed. |
| 55 | M&L for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall), window sill, door sill, window jamb etc , 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all specified and directed. |
| 56 | Demolition of RCC Not exc 15cm thickness Roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work |
| 57 | M&L for RCC1:2:4type B-1 (Nominal Mix) (using 20 mm stone agg) as in Chajja supported on walls, beams and columns in roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as spd |
| 58 | M&L for mild steel deformed TMT bars 10mm dia and over (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as spd and directed by engr in charge |
| 59 | M & L for rough finish formwork to soffits of suspended slabs such as roof slabs, floor slabs and lintels, landingand similar work n exc 200mm thick. complete all as spd and directed by engr in charge |
| 60 | Demolition of brick/Stone work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed. |
| 61 | M&L for brick work with old sizefly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 62 | M&L for half brick thick wall with old size fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed. |
| 63 | M&L for15 mm rendering thick in CM (1:6) on fair faces of brick work/stone surfaces finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed. |
| 64 | M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC) on fair faces ofbrick/stone surfaces, finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note: WPC in 5 mm thick 2nd layer plaster measured and paid separately. |
| 65 | M&L for15mm rendering thick in CM (1:6) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed. |
| 66 | M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC ) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed. Notes: WPC in 5 mm thick 2nd layerplaster measured and paid separately. |
| 67 | M&L for10 mm rendering thick in CM (1:3) on fair faces of concrete surfaces in ceiling finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed. |
| 68 | M&L for preparation of new plastered of wall surface and applying two coats of oil bound distemper, over a coat of chalk whitening primerover and incl a layer 3mm thick of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 69 | M&L forpreparation of surfaces of wallsand applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof)of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer\"s drums with seal intact. |
| 70 | M&L for preparation of new plastered of ceiling surface and applying three coats of white wash on new plastered surface of ceiling surface, complete all asspecified and as directed. |
| 71 | M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand paper rubbing and finally washing with wateringand applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof)of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer\"s drums with seal intact. |
| 72 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitening primer, over a layer of (JK/Birla) 3.0 mm thick wall care putty to get smooth and level finish, complete all as specified and directed. |
| 73 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated ceiling surfaces and preparationof ceiling surface and applying Threecoats of White wash on new plastered surface of ceiling surface, complete all as specified and as directed. |
| 74 | S&F SS grating of round shape dome type 4\" to 5\", floor traptraps etc,complete all as specified and directed. |
| 75 | Dismantling stone slabs and tiles of any description or thickness laid , bedded and pointed in any mortaras in floors, aprons etc. complete all as specified and directed. |
| 76 | M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 77 | M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10 mm thick backing coatin CM 1:4 complete all as specified and directed.Note: Kota stone in Step will be placed in single piece with groove lines at edge. |
| 78 | M&L for factory made machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed.Note : The cost of sand cushion and plastering to edges is included in quoted rate.) |
| 79 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 80 | S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 81 | Supply and fixing stainless steel (grade 304) railing made of hollow tubes , channel, plates, etc. including welding , grinding, buffing, polishing, and making curvature (where required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc. of required size on the top of the floor/staircase or side of the waist slab with suitable arrangements as per direction of the Engineer-in-Charge.Notes: For payment purpose only weight of the stainless steel members shall be considered excluding fixing accessories such as nut, bots fasteners etc as these are deemed to be included in quoted rate |
| 82 | Supply & fixing (S S railing with glass) side mounted , supply and installation of model make or equvalent , SS 304 grade 900 mm high railing made of SS 304 Grade hand rail pipe of 50 mm outer dia and 1.6 mm wall thickness polish with automatic round polishing machine to get a uniform hailine finish K240 mounted with the help of adjustable solid neck support on balustrade of approved design at 900 mm center to center (or actual division as per site condition) fitted with four numbers solid glass connectors for holding the infill glass of 12 mm thick toughned and laminated , glass connectors to be fitted with balustrade with the help of SS screw overall mounted on the SS 304 grade solid base plate 100mm x 8 mm with the help of dash fastners oh Hilti/Fischers Make of equivalent.Note : For payment purpose only lengthof the railingshall be considered excluding fixing accessories such as nut, bots fasteners etc as these are deemed to be included in quoted rate |
| 83 | M&L for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed |
| 84 | M&L Framless 12mm glass double doorwith necessary floor spring at the bottom and pivot at the top. The door will be fitted with a 450mm D type SS handle both side and locking arrange ments fixed on glass as per sample kept in AGE B/R - I office complete all as spd.Note :-The rate for Floor spring & Pivot, Purpose made handle and locking arrangement shall inluded in this item . |
| 85 | Supply and laying XLPE insulated PVC innersheathed multi stranded armoured copper conductorcable 1100 volts grade three core from LT panel to starter, complete laid in floor/wall or cable duct including fixing with appropriate Copper lugs, spreader links etc all of size 10 sq mm 3 core. |
| 86 | Supply, installation, testing and commisioning of mono block centrifugal pump set 7.5 KW/10 HP, three phase, 415V, 2900 RPM, 50 Hz, minimum head 11 meter, maximum Head 39 meter, discharge minimum 9 LPS and maximum discharge 23 LPS electric driven,inclusive of star delta starter and copper cable from starter to motor and PCC foundation including weather protection covering all as specified and directed by Engineer in charge. MAKE : KDS1040 or EquivalantKirloskar/KSB/crompton. |
| 87 | Excavation in trenches not exc 1.5m widthand not exc1.5 min depth and getting out forlaying of pipes etc in soft/loose soil . |
| 88 | Returning filling in including spreading levelling watering and ramming in layers not exceeding 25 cm in any type of soil. |
| 89 | Removing of excavated surplus soil to a distance not exceeding50M where directed and at a level not exceeding 1.5 M above the starting point. |
| 90 | Supply & Laying High density polyethylene pipes (HDPE) double wall corrugatted (DWC) of pressure rating 6 kgf/cm2 and of size 50 mmlaid in trenches along with the appropriate size of cables for protection all as specified and as directed by EIC. |
| 91 | Supply and connecting with existing header pipe galvanized, “Medium class”, including fittings of size 80 mm (3”) dia |
| 92 | Supply and fix Valve, reflux, with by-pass Arrangement, 80 mm (3”) dia |
| 93 | Earthing completewith galvanised steel earth plate electrode 60X60cmX6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as show in elecrical plate No 3 connected to earthing test point all as sepcified or indicated including testing on completion. |
| 94 | Supply and fixgun metal gate valve with iron wheel head screwed both ends for iron pipeand fixed ofsizes 20mm bore incl taking down and removal from site. |
| 95 | All as per item ser No 94 above but for 25mm bore |
| 96 | All as per item ser No 94 above but for 80mm bore |
| 97 | Dismentling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate PCC block 20 cm thick wall massonary built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate inclframe made of angles iron of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etcof size 900x600x1000mm all as specified and directed by Engr-in-Charge. |
| 98 | Taking down carefully aluminum/copper point wiring (light/fan/ socket/ power) complete including fittings such as switch, socket, ceiling roses light fittings etc andand making good disturbed surface of wall all as specified and directed by Engineer-in-Charge. |
| 99 | M&L for modular point wiring One light/Fan/bell point /Exhaust fan controlled by one switch one way complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core,PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dollyand including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator withsleek and curvy cover plates, for mounting ofmodularswitches, sockets, fan regulators complete all as specified and as directed. |
| 100 | All as per item No 97 but for one socket out let 5 Amps 3 Pin on same board with other switch |
| 101 | All as per item No 97 but forone socket out let 5 Amps 3 pin on independent board |
| 102 | All as per item No 2 here in before but with single core multistranded cable of size 4 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 4 Sq mm all as specified and directed |
| 103 | Supply and fixing in replacement Modular switch 16 Ampsone way 240 V complete all as specified and directed. |
| 104 | Supply and fixingin replacement Modular socket out let 2/3 pin combined 6 Amps 2 module complete all as specified and directed. |
| 105 | Supply and fixing in replacement Modular switch6 Amps one way. |
| 106 | Supply and fixingin replacement Modular socket outlet in repair 2/3 pin, 6/16 Amps socket outlet 240 volts 2 module complete all as specified and directed. |
| 107 | Supply and fixingin replacement modular Fan step regulator, 120W - 2 module complete all as specified and directed. |
| 108 | Supply and fixingin replacement Ceiling rose on PVC FRLS board size 65 X 50 mmthree terminal Complete. |
| 109 | Supply and fixingin replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 110 | Supply and fixingin replacement LED lights fitting 10W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 111 | Supply and fixingin replacement LED Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 67 protection complete |
| 112 | Taking down old sub main wiring and M&L for concealed sub main wiring with 2 run of 6 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLSH, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : Tworun of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cableincuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces. |
| 113 | M&L for Taking downexhaust fan, steel body/ PVC Body AC single Phase. 230V of size 250/300m sweep with, blades, and frame and louvers and keep in safe custody for refix after complete of work by making all necessary connection. |
| 114 | Taking down and refixing the Ceiling fan after repair work (i.e celaning, oiling, greasing, blade leveling etc) complete with down rod and 3 core 1.5 sg mm copper conductor cable from ceilingrose to fan complete with all accessoriesall as directed by Engr-in-Charge. |
| 115 | S&F in replacement of TPN DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way (Concealed flush to wall), 415 volts with bus bar rating 250 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directe d.Note : 1.Blank plates will be included on the quoted rates.2. All wires to be properly connected with copper lugs.3.MCB will be measured and paid separately. |
| 116 | S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way (Concealed flush to wall), 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.Note : 1.Blank plates will be included on the quoted rates.2. All wires to be properly connected with copper lugs.3.MCB will be measured and paid separately. |
| 117 | Supply and fixingin replacement 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissionin |
| 118 | Supply and fixingin replacement MCB SPN, 40 Amp, C Curve 240 volts.in the MCB DB Complete with connection testing and commissionin |
| 119 | M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed. |
| 120 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5core |
| 121 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5core |
| 122 | Supplying and laying un-reinforced precast concrete cable cover,ISI marked ,class LT, type 1, size 250mm x 150mm x 40mmduly embossed allas specified and as directed. |
| 123 | M & L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15 cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part I and as directed. |
| 124 | Supply and lay 50 mm bore galvanised steel tubing Light grade with all fittings and fixtures laid in trench or ceiling or laying in floors complete all as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
