|
| 1 | Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for taking out and laying CI/GI pipe complete all as specified and directed. Note :- Earth work for taking out existing pipe line shall be done after testing commisioning of new pipe line. |
| 2 | Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer complete all as specified and directed. |
| 3 | Removal of surplus spoil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting pointcompleteall as specified and directed. |
| 4 | Taking down 100 mm bore CI pipeline from trench stacking it reuse or issued to contrctroctor as credit of following sizesNote :- Ttaking out existing pipe line shall be done after testing commisioning of new pipe line. |
| 5 | - ditto - all as per above ser item no. 4 but 150mm bore. |
| 6 | - ditto - all as per above ser item no. 4 but 200mm bore. |
| 7 | Refixing old rerived serviceable 100 bore CI pipe of any description in trench completeall as specified and directed. |
| 8 | - ditto - all as per above ser item no. 7 but 150mm bore completeall as specified and directed. |
| 9 | - ditto - all as per above ser item no. 7 but 200mm bore completeall as specified and directed. |
| 10 | S&F of 100mm bore DI pipe K9in any lengthlaid in trenchand connecting up with water supply main complete including jointes all as specified and directed |
| 11 | - ditto - all as per above ser item no. 10 but 150mm bore completeall as specified and directed. |
| 12 | - ditto - all as per above ser item no. 10 but 200mm bore completeall as specified and directed. |
| 13 | S&F in replacement cast iron fitting such as bends, tapers, (any type, radius and angle) tapers any type, (straight, bend, increasing,decreasing or double socket etc.) Tee pieces single branch. \"Y\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs tee pieces, single branch for spigot and socket and flanged pipe up to 150 mm bore complete all as specified and directed. |
| 14 | Supply and fixing in replacment cast iron sluice valve80 mm bore with flanged ends, ISI mark with Gun metal spindle, CI gate with brass ring and iron wheel handle with jointing material such as nuts /bolts washers and rubber insertion sheet etc including taking out old U/S sluice valve complete all as specified |
| 15 | - ditto - all as per above ser item no. 14 but 100mm bore completeall as specified and directed. |
| 16 | - ditto - all as per above ser item no. 14 but 200mm bore completeall as specified and directed. |
| 17 | M&L for valve pits of internal dimensions 90cm x 90 cm x 90 cmmaking good disturbed/dismantled brick work in cement mortar (1:4) plastering surfaces in cement mortar 1:6, 15mm thick and PCC coping in cement concrete 1:2:4 type B-1 and providing MS cover in replacement made out of MS sheet 3 mm thick duly welded to MS angle iron frame 35x35x5mmincluding frame work as per existing sizewith two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.(a) M&L for brick work using sub class \"B\" (old size bricks) in CM 1:4 (b) M&L for rendering 15 mm thick in CM 1:4 finishing even and fair (c) M&L for PCC 1:2:4 type B-0 (using cum 12.5 mm graded stone aggregate ) as in coping (d) M&L for any type of mild steel work such as frame sheet 3 mm thick including welding (e) M&L for painting two coats of synthetic enamel paint over a coat of red oxide primer to untreated steel surface & prep of surface. |
| 18 | M&L for lead joint suitable for CI pipe 80 mm bore complete all as specified and directed. |
| 19 | - ditto - all as per above ser item no. 18 but 100mm bore completeall as specified and directed. |
| 20 | - ditto - all as per above ser item no. 18 but 200mm bore completeall as specified and directed. |
| 21 | PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in block mass concrete below and above the ground level for resting pipe line allas specified and directed. |
| 22 | Supply and fix electric water heater stoarage type steel/ABS body with mettalic inner tank & heating element upto 2KW capacity 25Ltr, BEE 5 Star ratedAC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces complete with all accessories such as safety valve, thermostate, NRV, steel braided connection piece of 450 mm long complete all as specified. Make:- Havells/Crompton/Usha/Bajaj |
| 23 | M&L for sub main wiring with two runs of single core PVC insulated FRLSH, unsheathed copper condutor, multi stranded cable of size 2.5 Sqmm 1100 volts grade drawn PVC concealed conduit of size19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 2.5 Sqmm single core copper conductormulti-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two run of 2.50 Sqmm cable one run of 2.50 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.) |
| 24 | Supply and fixing sheet metal enlosure single pole and neutral with two pin socket and earth plug complete with one MCB single pole 240 volts 20 amps complete all as specified and directed by EIC. |
| 25 | S&F of MCB, 10 to 32 Amp, SP, 240 Volt Make - Legrand/Schneide/Siemens-Betagard |
| 26 | S&F of GI pipe medium grade with all fitting fixed on wall with all connection accessories of size 15 mm bore complete all as specified and directed. |
| 27 | M&L for Hot water tap of brass/gun metal 15 mm bore complete all as specified and as directed by Engr-in-charge. |
| 28 | S&F of gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed of size 15 mm dia complete all as specified and directed. |
| 29 | M&L for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel Metal flush mounting box for mounting of fittings like switch , socket and fan regulator and cover plat of suitable modules capacity and make of swich socket complete all as specified and as directed. |
| 30 | One light point controlled by one, one way switch |
| 31 | - ditto - all as per above ser item no. 29 here in before but 2.5 Sqmm P.V.C insulated unsheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board. |
| 32 | S&F of switch piano flush type single pole one way 6 Amp (ISI Marked) |
| 33 | S&F of switch piano flush type single pole one way 15 Amp (ISI Marked) |
| 34 | S&F of socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) |
| 35 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) |
| 36 | S&F of hot water PVC connections for geysers including necessary clamps, nuts and bolts etc. complete all as specified and directed. |
| 37 | M&L for hot water tap of brass/gun metal 15 mm bore complete all as specified and as directed by Engr-in-charge. |
| 38 | S&F of air circulator fan 230 volts single phase Oscillating 450mm Sweep suitable for wall mounting complete all as Specified and as directed by Engineer -in-Charge. |
| 39 | S&F of exhaust fan, made of steel body AC single Phase. 230V of size 450 mm sweep heavy duty with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as directed. |
| 40 | S&F of exhaust fan, made of steel body AC single Phase. 230V of size 450 mm sweep heavy duty with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as directed. |
