|
| 1 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 2 | Granite stone slab colour black, Cherry/Ruby red |
| 3 | Area of slab upto 0.50 sqm |
| 4 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 5 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 6 | One coat |
| 7 | Two coats |
| 8 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 9 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 10 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 12 | One or more coats on old work. |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 14 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 15 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. |
| 16 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 17 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 18 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 19 | Taking out existing wooden door /window shutter, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door /window frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 20 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 21 | For thickness of tiles 10 mm to 25 mm |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 23 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 24 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 25 | 610x460 mm bowl depth 200 mm. |
| 26 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 28 | 20 mm nominal outer dia. Pipes. |
| 29 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 30 | 15 mm nominal bore. |
| 31 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 32 | 15 mm nominal bore. |
| 33 | Providing & fixing fly proof wire gauze mesh to windows, clerestory windows & doors with aluminium \"U\" beadingas per site requirement and as directed by E-I-C etc. complete. |
| 34 | Stainless steel (grade 304) wire gauze of 0.3 mm dia wire and 1.8mm aperture on both directions. |
| 35 | Cleaning of existing staff quarter at all heights by removal of cob web, pigeon droppings, debris, unwanted, un serviceable abandoned material etc. from all the rooms, dusting of walls, windows, doors, cupboards etc., washing the flooring of all rooms with detergent, washing the flooring and dado of toilets and bath room with the acid etc., making them into useable/liveable conditions complete etc. for immediate occupation of quarter as directed by Engineer-in-charge. Each quarter cleaning is measured as one job. |
| 36 | Type-IV Qtr. |
| 37 | Providing and fixing of approved quality and colour etc. all operations complete as directed by the engineer in charge. |
| 38 | Health faucet with wall support lever of 15mm nominal bore stainless steel/ CP brass nozzle jet and handle of approved quality and make for EWC |
| 39 | C.P. brasstwo in one bib cock 15 mm nominal boreof approved quality conforming to IS:8931: |