|
| 1 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete – As per the Direction of office in charge. |
| 2 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily– As per the Direction of office in charge. |
| 3 | Plastering the walls 20mm thickness using with cement mortar 1:4 including cost of all materials, labours and other charges etc complete– As per the Direction of office in charge. |
| 4 | Laying stone jelly concrete 1:3:6 for increase the level at the bathroom area for providing tiles flooring including cost of all materials, labours and other charges etc., complete– As per the Direction of office in charge. |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) other charges etc– As per the Direction of office in charge. |
| 6 | Providing and fixing mineral fibre false ceiling tiles With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60) at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k 0.052 0.057 w/m K, Fire Performance as per (BS 476 pt-6&7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main \"T\". The system should rest on periphery walls /partitions with the help of Gl perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface to the internal surface of the walls after Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including cost of all materials, labours and other charges etc – As per the Direction of office in charge. |
| 8 | Providing FRP door shutter with door frame for toilet blocks including cost of all fixtures and other fixing charges etc., complete– As per the Direction of office in charge. |
| 9 | Supply of electrical materials and necessary electrification to the store room area including bathroom area etc complete– As per the Direction of office in charge.PVC pipes for wiring 10 feet (ISI) |
| 10 | PVC bends (ISI) |
| 11 | PVC elbow (ISI) |
| 12 | 4 way junction box |
| 13 | 2mm square copper wire for electrification each 90rmt |
| 14 | 4mm square copper wire for electrification each 90rmt |
| 15 | Switch boards with necessary sockets and switches |
| 16 | Providing earthing, wiring connection from main service board to internal connections. |
| 17 | LED tube light 50w |
| 18 | Ceiling fan |
| 19 | LED light fitting for false ceiling area including necessary fixtures. (Fittings samples to be get approved before execution) |
| 20 | Skilled labour (Electrician) including EPF ESI and other GST charges etc |
| 21 | Unskilled labour including EPF, ESIS as per the minimum wages act and other GST charges etc |
| 22 | Supplying of the plumping materials and necessary fixtures with water supply connection with providing water tank etc complete– As per the Direction of office in charge. 2\" UPVC Pipes for water connection 10 feet each |
| 23 | PVC elbow and bends |
| 24 | Steel taps |
| 25 | Wash bastion |
| 26 | Western closet with flush tank |
| 27 | Exhaust fan |
| 28 | Flush gun |
| 29 | Cost of solutions, threads and cutting blades etc for fixing, fitting of the above fixtures. |
| 30 | Skilled labour (Plumber) including EPF ESI and other GST charges etc |
| 31 | Unskilled labour including EPF, ESIS as per the minimum wages act |
| 32 | Towel rack rail (Stainless steel) |
| 33 | Soap stand (Stainless steel) |
| 34 | Mirror (45cm X 60cm) |
| 35 | PVC tank 1000 ltrs |
| 36 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete– As per the Direction of office in charge. |
| 37 | Providing MS grill gate in front of the front side using with 50x50x6mm MS L angle horizontal and vertical frames and 50x6mm MS flat horizontal center to center and 16mm dia rods 10 cm to 10cm each distance including providing aldrop and top of the grill to be provide MS sheet with necesary welding, cutting charges and other charges etc complete– As per the Direction of office in charge. |
| 38 | Providing new GI sheet 0.8mm thickness with necessary L angles for fixing in position for avoiding rainy water stagnation including cost of all materials, labours and other charges etc., complete– As per the Direction of office in charge. |
| 39 | Dismantling the existing wall for providing new door way to the toilet block area including cost of all materials, labours and other charges etc complete– As per the Direction of office in charge. |
| 40 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, Finishing walls with ready mixed Premium acrylic emulsion paint including all materials and labour charges etc. complete– As per the Direction of office in charge. |
| 41 | Pointing the Interlocking bricks using with cement mortar 1:2 including cost of all labours materials and other charges etc complete– As per the Direction of office in charge. |
