|
| 1 | Supply of Agricultural Machineries with following specifications: |
| 2 | Supply of Tractorand accessories with following specifications:a) Supply of tractor with following specifications 4 stroke, direct injection diesel engine, dual clutch, oil immersed disc brake, Single PTO, Independent PTO lever, dry type air filter, constant mesh / synchromesh transmission, planetary drive, 4wheel drive, PTO power above 38HP, automatic depth and draft control, Dry weight below 2 ton, wheel base above 1950mm, ground clearance more than 350mm, water proof front housing, in-built power-steering. front bumper, test report from designated institution.Accessories: ToolKit, Srew Jack, ROPS with Canopy, Seat with seat belt, Ballast weight, Drawbar, Universal joint, 3 point link with nut and bolt. b) Cutivator5 tyne rigid type Duck foot cultivator suitable for the above tractor, test report from designated institution c) RotavatorCentrally Aligned Multi-Speed Rotavator with Gear type Transmission Suitable for the above tractor1. Width of Cut Not Less than 1750 mm2. Number of Blades 423. Working Depth upto 200 mm4. Weight Less than 500 kgTest report from designated institutiond) Tractor operated shredderTractor PTO operated shredder having production Capacity not below 1500 Kg/hr with universal joint suitable for the above Tractor, input size dimension 1450 x 1760 x 1050mm (L*W*B). Test report from designated institutione) Hydraulic Tipping Trailer 5Tone suitable for above tractorSuitable for above tractor, Body size 10ft x 6ft x1.5ft, Platform with minimum thickness of 5mm MS sheet, Side door with minimum thickness of 2.5mm MS Sheet, with minimum Jack capacity of 5 ton and tyre size 9.00 x16. (minimum) 4 mm, T Jacky of 5T capacity to be supplied with 360 degree turning clamp. |
| 3 | Garden Tiller 5.5 HP with attachments Blue spirel, Ridger rotavator with specification below4 stroke, air cooled, single cylinder, HP not less than 5HP, Petrol engine working width 35-55-85cm, depth not below 7.5cm, overall weight not more than 60kg, test report from designated institution |
| 4 | Brush Cutter4 stroke, Cutter dia. not less than 300mm, overall weight less than 8kg, HP not less than 1.5 HP, cutter dia not less 300mm,Fuel tank capacity not less than 600 ml. Cost including GST, transportation up to site and demo. Test certificate from designated institution |
| 5 | Coconut climberHemperi model with SS 3 rod, weight less than or equal to 12 Kg. |
| 6 | Aluminum ladder Aluminum Straight Ladder (20Ft) with flat step, load bearing capacity 150kg, supporting channel thickness 4mm or above, Riser height 10 to 13 inch, step channel width 2inch or above, test report from designated institution |
| 7 | Aluminum Pole ladder Aluminum pole ladder height 30ft or nearest with weight below 15kg and cylindrical aluminium pipe with thickness not below 1,3mm with circlip type. Nylon steps and soil gripper, gap between step not above 30cc, test certificate from any govt institution. |
| 8 | Battery operated SprayerBattery operated Sprayer 12 Amp/12 V battery and with suitable lance, tank capacity 15 Lr to 20 Lr, weight not more than 7kg, auto cutoff, test report from designated institution |
| 9 | Chain SawChain saw petrol engine 2 stroke with Engine CC 75 to 90, Weight Power 5.5Hp, overall weight Below 8 Kg, carbide tipped blade, Guide bar length 18 inch,test report from designated institution |
| 10 | Petrol operated water pumpPetrol fuel, 3HP or nearest at 3600rpm, 4 stroke, forced air cooled, Pump type centrifugal self priming pump, inlet dia 80mm, outlet 80mm, discharge not less than 1100 lpm, total head 23m, dry weight not more than 28kg,test report from designated institution |
| 11 | Telescopic pole pruner manualTelescopic extendable Pole Pruner (manual) with 6.5m aluminum pipe, 16\" curved tooth S.S. pruner blade, weight not more than 3kg. |
| 12 | Chaff cuttersingle phase A/C induction motor 5 HP or nearest, 3 star rating or above, Cutting capacity 1500 Kg/hr having double blade and test certificate |
| 13 | Electric Lawn mowerContinuous rating 1600 W or nearest, Hole dia meter 8 m, cutting with 410 m, cutting height 20-75 mm, vibrating level 2.5m / (s ^ 2) or less, sound power level 95 db (A) or less, dimension nearest 1465 * 530 * 905 - 1135mm weight below 20 Kg |
| 14 | Pressure Washer (3HP)230 V/50 HZ 3 star rating motor, pressure 130-145 bar flow rate, 500 lit/hr (max) in let temperature up to 40° C, load 2-1 KW, weight without accessories not more than 12 Kg. Minimum Area of performance m2/hr 40 |
| 15 | Slurry pump3 HP or nearest size Electric Slurry Pump having 3 star rating and above, 50x50 suction delivery size in mm, Rpm 2880, solid passage 10 mm, head ranges 3.2 m to 20 m and discharge, 1000 to 250 l/minute or nearest. |
| 16 | Battery operated ride on self propelled multipurpose tool bar including all attachmentsa)Battery operated ride on self propelled multipurpose tool barApproximate weight 200kg, No.of wheels 3, motor power 1200w continuous and 2500w peka, no of gear 2, battery capacity 5 KW minumium, power tiller type tow hitch, 699kg load haulage, lift mechanisam by electro hydraulic lift, charging sytem with input voltgare 180-280v, 50 Hz, charge time 3.5 to 4 hr for full charge, input socket 16A. the machinery should have auxillary controller box to give power to the attachments like rotavator, auger, power sprayer etc,test report from designated institutionb) 3 tyne sweep shovel cultivatorWeight 25 to 28kg, no of tynes-3, Tyne spacing 13 inch adjusable, working width 1 ft to 2.9ftc) Rear TubLoad capacity 150kg, Telescopic suspension- 2nos,dimension 735x620x355mmd) 2ft flail mower (mulcher)Motor type BLDC, power 1200w continuous 2500w peak, maximum speed 2000rpm, maximum weight 80kg, y type blade, no of blades 32, cutting width 610mm, no of flanges-16 nos belt drivene) Earth AugerMotor Type BLDC, auger bit maximum speed- 240rpm, Drill diameter- 6,8,12 & 24 inch, drill length 610mmf) Power Weeder attachment (Rotovator)Motor Type BLDC, maximum speed 210rpm, No.of blades 20, Tillage width 24 inch, Maximum tillage depth 3 inchg) HTP sprayer attachment with motorMotor Type BLDC,maximum speed 2800-3600rpm, ouput pressur (bar) -10 to 35 maximumh) 3 side opening trolleyLoad capacity -600kg, Dimension 1830mm*860mm*870mmi) 3ft front douserLoad capacity -50kg, Dimension 920mm*170mm*440mmj) Front lift mechanisamDimension 1045mm*310mm*455 mm, load capacity 50kg, mounting with M12*30 (7Nos)k) DC operated sprayer pumpflow rate 9to 10lpm, maximum pressure 15 bar, weight below 2.2kgl) Rotatory Dibble Seed Drill (4 drums)4 types drums suitable for differenct seeds, seeding gap adjestable between 15 inch to 60 inch, total lengh 1850mm The supply should include PVC/ Flexible suction pipe length 8m with diameter suitable for proposed pump inlet and a PVC delivery pipe length 15m with diameter suitable to the proposed pump outlet. The suction pipe shall be fitted with a PVC foot valve suitable to the proposed suction pipe.NRV to be provided and Vacuum pump with all fittings. Please Enable Macros to View BoQ information |
