|
| 1 | वार्ड न० 06 में ट्रेंचिंग ग्राउंड में बाउंड्रीवाल निर्माण का कार्य I |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator) manual means in foundation trenches or drains thot exceeding 1.5 m in width or 10 sqm on plan) ncluding dressing of sides and ramming of bottoms, lift upto 15 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m |
| 3 | PCC 148 (1 Cement 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Providing and laying in position specified grade of remforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinih level 1:15:3 (1 cement 15 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work forFoundations, lootings, bases for columns etc. for mass concrete |
| 6 | Foundations, footings, bases of columns, |
| 7 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 8 | Limtels, beams, plinth beams, girders, bressumers and cantilevers |
| 9 | Steel reinforcament for R.C.C. work including straightening. eating banding, placing in position and binding all complete upto level hero-Mechanically Truated bars of grade Fe-500D or more. |
| 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural etc as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 11 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 12 | Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimeter for chimney stacks, sky light etc.: 1.00 mm thick |
| 13 | P/Fixing Signe Board Please Enable Macros to View BoQ information |
