|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (i)Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)For thickness of tiles 10 mm to 25 mm |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Of area 3 sq. metres and below |
| 4 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm (twenty milimetre) nominal size) |
| 5 | Half Brick work with common burnt clay machine moulded perforated brick of class designation 12.5 conferming to in superstructre above plinth level up to floor five level in cement mortpor 1:4 with FPS ( Non modular bricks ) |
| 6 | Providing and fixing CPVC pipe brass threaded fitting including fixing the pipe including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 20mm dia. |
| 7 | Providing and Fixing UPVC Fitting excluding pipe including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) Brass elbow (i)15mm dia. |
| 8 | UPVC Brass tee |
| 9 | CPVC Plain Tee (i) 20mm dia. |
| 10 | CPVC Brass MTA |
| 11 | CPVC Brass FTA |
| 12 | CPVC Brass FTA |
| 13 | Brass Elbow |
| 14 | Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc including carriage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge. 110 x 75 |
| 15 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge 110 mm dia. |
| 16 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 110 mm dia. |
| 17 | (ii) 75 mm dia |
| 18 | Providing and fixing PVC degree bend ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 110 mm dia. |
| 19 | (ii) 75 mm dia |
| 20 | Providing and fixing PVC Plain Tee ISI marked including fixing with approved adhesive etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 75 mm dia. |
| 21 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) 110 mm dia. |
| 22 | (ii) 75 mm dia. |
| 23 | Providing and fixing PVC Collers ISI including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)110 mm dia. |
| 24 | (b) 75mm dia |
| 25 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Cement Mortar 1:4 (one Cement: Four Sand). |
| 26 | Providing and laying Digital Ceramic walls tiles of size 300x600 mm(three hundred into Six Hundred milimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimetre)thick cement mortar 1:3(one Cement: three Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 27 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters etc. laid over 20mm thick base cement mortar 1:4.(one cement: four sand) joints treated with white cement mixed with matching pigment , epoxy touch ups, including rubbing curing, moulding and polishing to edges to give high gloss finish etc. (i) Granite of any colour and shade (a) Area of slab upto 0.50 sqm including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 28 | Providing and laying Ceramic glazed antiskid floor tiles of size600x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:3(1 Cement : 3 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 29 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetre) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) Size of tile 1200x600mm (Twelve hundred into six hundred milimetre) In steping. |
| 30 | Providing and fixing 19mm thick HDMR laminated board make action tesa in shelves / box for up boards i/c fixing with nickel platedHydraulic hinges with screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 31 | Providing and fixing 19mm thickHDMR laminated board make action tesa for shutters for cup boards / ply wood i/c fixing with nickel plated Hydraulic hinges with screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 32 | Providing and fixing 1.50 m thick Glass acrylic sheet ( sunmica ) on boards / plywood sheets make action tesa with approved adhesive and nails etc. Complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 33 | Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 9mm thick . |
| 34 | Providing and fixing square edged cover fillets PVC lining / tape including mitring at junctions with wood screws and nails complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 35 | Providing and fixing magnetic Catchers ISI marked with necessary screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 36 | Providing and fixing bright finished Stainless Steel handles with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125mm |
| 37 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, abidused trabsoarebt ir dyed required shade conforming to IS 1868 (Minium anodic coating of grade AC 15) fixed with raw plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junction at top bottom and sides with required PVC/Neoprence felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (a) For Idoors windows and ventilatiors and glazed partitions frames. |
| 38 | P/F Aluminium doors windows vantilator shutters and patitions shutters and patitians etc EPDM rubber etc (i) with float glass panes (i) 6mm thickness |
| 39 | Steel work welded in built up section/ framed work , including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 40 | Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 8mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 41 | Providing valleys of 90cm wide over all in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 8.00mm thick with zinc coating not less than 350gm/m. |
| 42 | Providing and fixing 15cm wide,45cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc including making necessary connections with rain water pipes complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.63mm (Zero point sixty three milimeter) thick. |
| 43 | Provdiing and fixing polycarbonated sheet 2.00mm thick in lining with galvanised self driven screws complete with all accessories including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 44 | Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 45 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 46 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i)One or more coats on old work |
| 47 | Painting one coats(excluding priming coat) on previously painted wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters sand papering and stopping . including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint |
| 48 | Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint |
| 49 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly leaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 50 | Providing and fixing 100 mm sand cast Iron grating for gully trap including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 51 | Providing and fixing SS bottle trap for wash basin & sink including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 32mm dia. |
| 52 | Providing and fixing Divertor upper body including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS APR-101055 K. |
| 53 | Providing and fixing Divertor upper point including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS |
| 54 | Providing and Fixing Single lever wash basin mixer including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Make ESS ESS. |
| 55 | Providing and fixing over head shower rainfall approved including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Make ESS ESS. |
| 56 | Providing and fixing over head shower arms approved including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Make ESS ESS. |
| 57 | Providing and FixingAngle stop/Angle valve including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm dia Make ESS ESS |
| 58 | Providing and FixingSteel wired connection for brass union including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 45cm long (ii) 15mm dia |
| 59 | Providing and Fixing Bath health faucet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 60 | Providing and Fixing C.P. Bottle trap including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 61 | Providing and Fixing C.P brass Towel basket bath sense including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 62 | Providing and fixing C.P. Brass Towel ring complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Make ESS ESS. |
| 63 | Providing and fixing C.P brass soap dish brackets fixed to wooden plug with C.P. Brass screws including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 64 | Providing and Fixing Toilet paper hulder including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. Viking Make ESS ESS |
| 65 | Providing and Fixing Tooth brush tumblur including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. |
| 66 | Providing and Fixing Aluminium frame edge mirror including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. |
| 67 | Providing and Fixing Magnifying mirror approved brand quility with steel rub including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. |
| 68 | Providing and Fixing Glass shelf with edge round approved including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. |
| 69 | Providing and Fixing Glass corrner with edge including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. |
| 70 | Providing and Fixing Venity HDHMR with S.S 304 hinges for wash basin including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. |
| 71 | Providing and Fixing Table top wash basin block imported including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (16\"\"x16\"\") |
| 72 | Providing and Fixing kohler pure clean Bidet Single piece water closet ovel shaped white including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. MAKE Jaquar for equivalents. |
| 73 | Providing and Fixing Stainless steel sink with drainge board 40x20 SS-304 including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. Make Ess Ess |
| 74 | Providing and fixing following kitchen accessories (i) Kitchen wire basket |
| 75 | (ii) Kitchen Plain basket |
| 76 | (iii) Kitchen Plain wire basket |
| 77 | (iv) Kitchen Grain wire basket |
| 78 | (v) C.P.C Cross pipe cutlery |
| 79 | (vi) Kitchen Cup |
| 80 | (vii) Kitchen Thali wire basket |
| 81 | (viii) Dish rock hone care ino tech |
| 82 | (ix) SSC Right schieber swing corner |
| 83 | (x) Wire rock plate Please Enable Macros to View BoQ information |
