Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Subwork No.1 : Unloading PlateformItem No.1(a)Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 2 | Item No.1(b)Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259)Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 2 |
| 3 | Item No.1(c)Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-inchargeLift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 4 | Item No.2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP SSR 2023-24 / P.No. 40 / I.No. 18 |
| 5 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 6 | Item No.4Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRaft In RCC M-300MJP SSR 2023-24 / P.No. 47 / I.No.2-d |
| 7 | Item No.5Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 8 | Item No.6Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction,etc.complete.(Bd-A-11/263)MJP SSR 2023-24 / P.No. 41 / I.No.17 |
| 9 | Item No.7Structural Design Charges = 2 % of Cost of RCC work |
| 10 | Subwork No.2 : Screen ChamberItem No.1(a)Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 11 | Item No.1(b)Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259)Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 2 |
| 12 | Item No.1(c)Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-inchargeLift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 13 | Item No.2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP SSR 2023-24 / P.No. 40 / I.No. 18 |
| 14 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 15 | Item No.4Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRaft In RCC M-300MJP SSR 2023-24 / P.No. 47 / I.No.2-d |
| 16 | Item No.5Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 Vertical Wall MJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 17 | Item No.6Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction,etc.complete.(Bd-A-11/263)MJP SSR 2023-24 / P.No. 40 / I.No.17 |
| 18 | Item No.7Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 19 | Item No.8Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. completePWD SSR 2022-23 / P.No.206 / I.No.31.09 |
| 20 | Item No.9Structural Design Charges = 2 % of Cost of RCC work |
| 21 | Subwork No.3 : Sludge Storage TankItem No.1(a)Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 22 | Item No.1(b)Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259)Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 2 |
| 23 | Item No.1(c)Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 24 | Lift 1.50 to 3.00 mMJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 25 | Item No.1(d)Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Lift 1.50 to 3.00 mMJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 26 | Item No.2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP SSR 2023-24 / P.No. 40 / I.No. 18 |
| 27 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 28 | Item No.4Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRaft In RCC M-300MJP SSR 2023-24 / P.No. 47 / I.No.2-d |
| 29 | Item No.5Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 Vertical Wall MJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 30 | Item No.6Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 SlabMJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 31 | Item No.7Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 32 | Item No.8Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)MJP SSR 2023-24 / P.No. 40 / I.No.17 |
| 33 | Item No.9Providing and fixing in position steel concrete (S.F.R.C.) frame and fibre covers reinforced of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity).d) 90 x 60 cm size SFRC Cover MJP SSR 2023-24 / P.No. 287 / I.No.17-d |
| 34 | Item No.10Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. completePWD SSR 2022-23 / P.No.206 / I.No.31.09 |
| 35 | Item No.11Structural Design Charges = 2 % of Cost of RCC work |
| 36 | Subwork No.4 : Multi Disc Screw Press PlatformItem No.1(a)Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 37 | Item No.1(b)Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259)Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 2 |
| 38 | Item No.1(c)Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in MJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 39 | Item No.2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP SSR 2023-24 / P.No. 40 / I.No. 18 |
| 40 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 41 | Item No.4Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRaft In RCC M-300MJP SSR 2023-24 / P.No. 47 / I.No.2-d |
| 42 | Item No.5Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 ColumnMJP SSR 2023-24 / P.No. 48 / I.No.3-d |
| 43 | Item No.6Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 BeamMJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 44 | Item No.7Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 SlabMJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 45 | Item No.8Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 46 | Item No.9Providing stuctural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete.Structural SteelMJP SSR 2023-24 Item No.4, PG. No. 45 |
| 47 | Item No.10Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead andGI SheetPWD SSR 2022-23 Item No.38.08, PG. No. 233 |
| 48 | Item No.11Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)MJP SSR 2023-24 / P.No. 40 / I.No.17 |
| 49 | Item No.12Structural Design Charges = 2 % of Cost of RCC work |
| 50 | Subwork No.5 : Liquid Storage TankItem No.1(a)Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 51 | Item No.1(b)Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259)Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 2 |
| 52 | Item No.1(c)Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 53 | Lift 1.50 to 3.00 mMJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 54 | Item No.1(d)Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Lift 1.50 to 3.00 mMJP SSR 2023-24 / P.No. 37 / I.No. 7 |
| 55 | Item No.2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP SSR 2023-24 / P.No. 40 / I.No. 18 |
| 56 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 57 | Item No.4Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRaft In RCC M-300MJP SSR 2023-24 / P.No. 47 / I.No.2-d |
| 58 | Item No.5Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 Vertical Wall MJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 59 | Item No.6Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 SlabMJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 60 | Item No.7Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 61 | Item No.8Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)MJP SSR 2023-24 / P.No. 40 / I.No.17 |
| 62 | Item No.9Providing and fixing in position steel concrete (S.F.R.C.) frame and fibre covers reinforced of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity).d) 90 x 60 cm size SFRC Cover MJP SSR 2023-24 / P.No. 287 / I.No.17-d |
| 63 | Item No.10Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. completePWD SSR 2022-23 / P.No.206 / I.No.31.09 |
| 64 | Item No.11Structural Design Charges = 2 % of Cost of RCC work |
| 65 | Subwork No.6 : Zinc Alluminium TankItem No.1(a)Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 66 | Item No.1(b)Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-3/259)Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 2 |
| 67 | Item No.1(c)Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 68 | Item No.2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP SSR 2023-24 / P.No. 40 / I.No. 18 |
| 69 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 70 | Item No.4Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRaft In RCC M-300MJP SSR 2023-24 / P.No. 47 / I.No.2-d |
| 71 | Item No.5Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 72 | Item No.6Providing stuctural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete.Structural SteelMJP SSR 2023-24 Item No.4, PG. No. 45 |
| 73 | Item No.7Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead andGI SheetPWD SSR 2022-23 Item No.38.08, PG. No. 233 |
| 74 | Item No.8Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)MJP SSR 2023-24 / P.No. 41 / I.No.17 |
| 75 | Item No.9Supply and installation of prefabricated ground water storage bolted tanks, acomplete package in knock down, ready to assemble construction consisting of outer wall surface made out of special grade hot dip aluminum Zincalloy, metalic factory coated steel confirming toIS-15961 2012, minimum thickness of 0.6 mm. The inner surface should be provided withliners of minimum 0.6 mm thickness of reinforce polyethylene or polye propelene or metallocene material suitable for drinking water purpose. etc. complete. 23940 Litre (Zinc Tank)MJP SSR 2023-24 / P.No. 41 / I.No.17 |
| 76 | Item No.10Structural Design Charges = 2 % of Cost of RCC work |
| 77 | Subwork No.7 : Filter Feed TankItem No.1(a)Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 78 | Item No.1(b)Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259)Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 2 |
| 79 | Item No.1(c)Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 80 | Lift 1.50 to 3.00 m |
| 81 | Item No.1(d)Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Lift 1.50 to 3.00 mMJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 82 | Item No.2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP SSR 2023-24 / P.No. 40 / I.No. 18 |
| 83 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 84 | Item No.4Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRaft In RCC M-300MJP SSR 2023-24 / P.No. 47 / I.No.2-d |
| 85 | Item No.5Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 Vertical Wall MJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 86 | Item No.6Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 SlabMJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 87 | Item No.7Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 88 | Item No.8Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.(Bd-A-11/263)MJP SSR 2023-24 / P.No. 41 / I.No.17 |
| 89 | Item No.9Providing and fixing in position steel concrete (S.F.R.C.) frame and fibre covers reinforced of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity).d) 90 x 60 cm size SFRC Cover MJP SSR 2023-24 / P.No. 287 / I.No.17-d |
| 90 | Item No.10Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. completePWD SSR 2022-23 / P.No.206 / I.No.31.09 |
| 91 | Item No.11Structural Design Charges = 2 % of Cost of RCC work |
| 92 | Subwork No.8 : Treated Water TankItem No.1(a)Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 93 | Item No.1(b)Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259)Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 2 |
| 94 | Item No.1(c)Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 95 | Lift 1.50 to 3.00 mMJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 96 | Item No.1(d)Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Lift 1.50 to 3.00 mMJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 97 | Item No.2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP SSR 2023-24 / P.No. 40 / I.No. 18 |
| 98 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 99 | Item No.4Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRaft In RCC M-300MJP SSR 2023-24 / P.No. 47 / I.No.2-d |
| 100 | Item No.5Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 Vertical Wall MJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 101 | Item No.6Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-30 SlabMJP SSR 2023-24 / P.No. 48 / I.No.5-d |
| 102 | Item No.7Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 103 | Item No.8Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction,etc.complete.(Bd-A-11/263)MJP SSR 2023-24 / P.No. 41 / I.No.17 |
| 104 | Item No.9Providing and fixing in position steel concrete (S.F.R.C.) frame and fibre covers reinforced of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity).d) 90 x 60 cm size SFRC Cover MJP SSR 2023-24 / P.No. 287 / I.No.17-d |
| 105 | Item No.10Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. completePWD SSR 2022-23 / P.No.206 / I.No.31.09 |
| 106 | Item No.11Structural Design Charges = 2 % of Cost of RCC work |
| 107 | Subwork No.9 : Sludge Drying BedItem No.1(a)Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 108 | Item No.1(b)Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259)Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 2 |
| 109 | Item No.1(c)Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 5 |
| 110 | Item No.2Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)MJP SSR 2023-24 / P.No. 40 / I.No. 18 |
| 111 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 112 | Item No.4Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRaft In RCC M-300MJP SSR 2023-24 / P.No. 47 / I.No.2-d |
| 113 | Item No.5Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 114 | Item No.6Providing second classBurnt Brickmasonrywith conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete.Brick wallMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 115 | Item No.7Providing internal cement plaster 12mmthick in single coat in cement mortar 1:4 with out neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Internal PlasteringPWD SSR 2022-23 / I.No.-32.04 / P.No. 209 |
| 116 | Item No.8Providings and faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram percement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.External PlasteringPWD SSR 2022-23 / I.No.-32.11 / P.No. 209 |
| 117 | Item No.9Providing and applyingwhite-wash in two coats onold / newplastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface bybrushing and brooming down etc. complete.PWD SSR 2022-23 / I.No.-36.03 / P.No. 227 |
| 118 | Item No.10Providing and applying colour- wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. completeColour WashPWD SSR 2022-23 / I.No.-36.04 / P.No. 227 |
| 119 | Item No.11Providing stuctural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete.Structural SteelMJP SSR 2023-24 Item No.4, PG. No. 45 |
| 120 | Item No.12Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofingwithoutwindtiles including fastening with galvanised iron screws and bolts, lead andGI SheetPWD SSR 2022-23 Item No.38.08, PG. No. 233 |
| 121 | Item No.13Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.(Bd-A-11/263)MJP SSR 2023-24 / P.No. 41 / I.No.17 |
| 122 | Item No.14Structural Design Charges = 2 % of Cost of RCC work |
| 123 | Subwork No.11 : Control Panel cum Office Room with Toilet Block and Internal Electrical workItem No.1Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m MJP SSR 2023-24 / P.No. 37 / I.No. 1 |
| 124 | Item No.2Filling in plinth and floors / trenches with contractor\"s murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)MJP SSR 2023-24 / P.No. 41 / I.No.17 |
| 125 | Item No.3Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150MJP SSR 2023-24 Item No. 1.b, Page No. 47 |
| 126 | Item No.4Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rateof 5 litresof emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paperPWD SSR 2023-24 Item No. 21.22, Page No. 155 |
| 127 | Item No.5Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor ReinforcementRCC Footing M-200MJP SSR 2023-24 Item No. 2.b, Page No. 47 |
| 128 | Item No.6Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)RCC beam & lintel M-200MJP SSR 2023-24 Page No. 50 Item No. 4 |
| 129 | Item No.7Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted )RCC Column M-200MJP SSR 2023-24 Item No.3.b, Page No. 47 |
| 130 | Item No.8Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and desingns or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted .) Slab M-200MJP SSR 2023-24 Item No. 5.b, PG. No. 48 |
| 131 | Item No.9Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use fo L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted .) Excluding M S or Tor reinforcement.Chajja M-200MJP SSR 2023-24 Item No. 6.b, Page No. 49 |
| 132 | Item No.10Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor SteelMJP SSR 2023-24 Item No. 8.b PG. No. 50 |
| 133 | Item No.11Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of innerwalls/ in plinth external walls including bailing out water manually, striking joint sonun exposed faces,raking out joints on exposed faces and watering etc. Complete.PWD SSR 2022-23 Item No. 27.15, Page No.197 |
| 134 | Item No.12Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar of following proportion superstructure including striking out & racking out joint watering and scafolding etc complete.PWD SSR 2022-23 Item No. 27.05, Page No.197 |
| 135 | Item No.13Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. completePWD SSR 2022-23 Item No. 32.05, Page No.209 |
| 136 | Item No.14Providing sand faced plaster externally in cement motar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 Kg. per cement bag, curing the same for not less than 2 days and keeping the surface of the base coat rough to recive the sand faced tretment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for foureen days scaffolding etc. complete.PWD SSR 2022-23 Item No. 32.11, Page No.209 |
| 137 | Item No.15Providing and applyingwhite-wash in two coats onold / newplastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface bybrushing and brooming down etc. complete.PWD SSR 2022-23 / I.No.-36.03 / P.No. 227 |
| 138 | Item No.16Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc.complete.PWD SSR 2022-23 Item No. 36.04, Page No.227 |
| 139 | Item No.17Providing and laying matt finish ceramic tiles of having size 30cmx30cm confirming to I.S. 15622/2006 (group DII-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. PWD SSR 2022-23 Item No. 33.24, Page No.215 |
| 140 | Item No.18Bamboo wood paneling or paneling and glazing in paneled and glazed shutters for doors of 25 to 40mm thick. Providing & fixing in position Phenol bonded Bamboowood paneling of 10mmthick, in 25 to 40mm thick paneled or paneled and glazed shutters for doors,windows,clere storey windows in approved colous, texture & finishi. The bamboo wood planks shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. The panels shall have profiled in terlocking system locked in place with bamboop ins, all complete as per direction of theEntgineer inchargeand (Area of opening for panel inserts excluding portion inside grooves or rebates)PWD SSR 2022-23 Item No. 48.20, Page No.313 |
| 141 | Item No.19Providing and fixing steel windowof various sizes as per detailed drawingwit houthot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) PWD SSR 2022-23 Item No. 39.20, Page No.247 |
| 142 | Item No.20Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC \"C\" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick 95 mm wide PVC PWD SSR 2022-23 Item No. 39.47, Page No.255 |
| 143 | Item No.21Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. PWD SSR 2022-23 Item No. 33.25, Page No.215 |
| 144 | Item No.22Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litersPWD SSR 2022-23 Item No.42.53, Page No.280 |
| 145 | Item No.23Providing and fixing Orissa type white glazed earthen ware water closet pan of size 260mm x 440mm x 580mm with approved make Slim wall hung cistern with installation kit including S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete.PWD SSR 2022-23 Item No. 39.48, Page No.259 |
| 146 | Item No.24Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm sizeincluding Bib cock stop tap brass heavy15mm, brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap upto the outside face of the wall.PWD SSR 2022-23 Item No.41.65, Page No.272 |
| 147 | Item No.25Supplying & erecting decorative pre-wired box type fitting/batten suitable for 4 feet, T8 LED tube light (excluding tube light).PWD SSR Ele. 2023-24 Item No.2-1-1, Page No.15 |
| 148 | Item No.26Supplying and erecting regular/ standard model ceiling fan of 1400 mm. Sweep complete erected in position as per specification no. FG-FN/CFPWD SSR Ele. 2023-24 Item No.2-10-5, Page No.35 |
| 149 | Item No.27Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.PWD SSR Ele. 2023-24 Item No.2-6-1, Page No.23 |
| 150 | Item No.28Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no EA-EPPWD SSR Ele. 2023-24 Item No.2-10-5, Page No.35 |
| 151 | Item No.29Providing and fixing on walls / ceiling / floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kilogram /meter with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. completePWD SSR 2022-23 Item No.41.12, Page No.267 |
| 152 | Item No.30Providing and fixing on walls / ceiling / floors, 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kilogram/meter with necessary fittings and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessaryand conveyingand stacking the same in PWD chowky or as directed etc.PWD SSR 2022-23 Item No.41.14, Page No.267 |
| 153 | Item No.31Structural Design Charges = 2 % of Cost of RCC work |
| 154 | Subwork No.12 : FILTER MEDIAItem No.1Stone Aggregate - 40 mm, 20mm , 10 mm & 5 mma) For ZA TankStone Aggregate 10mm |
| 155 | Stone Aggregate 20mm |
| 156 | Stone Aggregate 40mm |
| 157 | b) For SDBStone Aggregate 10mm |
| 158 | Stone Aggregate 20mm |
| 159 | Stone Aggregate 40mm |
| 160 | Item No.2Transportation as per STATEMENT VI Including loading, unloading and stackingAggregate 40 mm & above (25 Km)MJP SSR 2023-24 / P.No. 22 / Statement VI |
| 161 | Subwork No.13 : Allied WorkItem No.1Supplying and erecting LED street light fitting suitable above Each 26W to 30W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG- ODF/FLS2 PWD/CSR 2023-24/Electrical/Item No. 2-3-3/Page No.19 |
| 162 | Item No.2Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5x3.65x3.25 mm thickness (4.5+1.75+1.75 m) length respectively and total 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg) as per specification no. OH-PL/STPPWD/SSR / 2022-23 / Item No.8-1-1 / Page No. 127 |
| 163 | Item No.3Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in ChargePWD/SSR / 2022-23 / Item No.6.36 / Page No. 60 |
| 164 | Item No.4Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved welding,anchoring and applying 3 coats of anticorrosive paint, etc. complete asdirected by Engineer-in-chargeMJP SSR 2023-24 Item No. 5 PG. No. 281 |
| 165 | Item No.5Topographic Survey of land available at site for construction of FSTPAs per Quotation |
| 166 | Item No.6Carryout Ficals Sample testAs per Quatation |
| 167 | Item No.7Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe (Rezan /concenti Deleted ire 0.75 mm dia ) withhot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6mmat 2.5mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete.PWD SSR 2022-23 / P.No.264 / I.No.40.05 |
| 168 | Item No.8Providing and fixing M.S.gate 2.5 M wide for compound with 40mmdiaG.I. pipe, approved grill work, RCC M-150 side pillars of 25cm x 40cm x 2.5M height, its foundation, finishing, painting, etc. complete.MJP SSR 2023-24 / I.No.3 / P.No. 56 |
| 169 | Item No.9Technology Provider Charges, Provide has to be submit process calculation with Hydraulic design and Drawings as per the Availability of land and FSTP capacityAs per Market rate |
| 170 | Sub work B - E&M WorkItem No.1Manual Screen- size 1 m length x 0.5 m width of SS 304 MOC and Manual hand rake for cleaning screen of SS handle 1 m in length and cleaning area of 6 Nos. 10 mm SS rod of total length 200 mm straight and 50 mm of 90 degree bend.As per Quotation |
| 171 | Item No.2Sewage PumpSewage Pumps-Supplying Non clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as belowHead upto 10 MtrsMDSP Pump (1W +1S) MJP Mech.CSR 2023-24 / I.No. PM 9-1-1 / P.No. 8 |
| 172 | ZA Tank Feed Pump (1W +1S) |
| 173 | Filter Feed Pump (1W +1S) |
| 174 | Treated Water Pump (1W +1S) |
| 175 | Item No.3Multi Disc Screw Press 1.25 Cu.m/Hr inlet Flow including automatic dosing system with Automatic poly dosing systemAs per Quatation |
| 176 | Transportation & Erection charges = 15% cost of Multi Disc Screw Press Machinery |
| 177 | Item No.4Designing,Supplying, Installing, commissioning & testing of Power Analyser interfacing to PLC Panel with modbus communicatuionport, as per IEC 62053 and in the prescribed format including mounting arrangement.Power AnalyserMJP Mech.CSR 2023-24 / I.No. 2.5 / P.No. 127 |
| 178 | Item No.5Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. > 7.5 HP & Up to 12.5 HPMJP Mech.CSR 2023-24 / I.No.LG 3-1 / P.No. 39 |
| 179 | Item No.6Supply, install and commission Electromagnetic Flow Meter (EMF) for size 63 mm 2.50 inch FlowmeterAs per Quotation |
| 180 | Item No.7Designing, Supplying, Installing, commissioning & testing of Ultrasonic level transmitter CE marked with following technical parameters Interfacing with PLC panel including mounting arrangementMJP Mech.CSR 2023-24 / I.No.1.1.a / P.No. 114 |
| 181 | Item No.83 core PVC insulated, PVC sheathed copper conductor flat submersible cableSupplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.3 core 16 sq mm MJP Mech.CSR 2023-24 / I.No.CB 1-6 / P.No. 48 |
| 182 | Item No.9Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cableSupplying and erecting, XLPE/ PVC insulated, armouredcable 1100V grade with ISI mark Four core,solid/stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sqmm, complete erected on wall /on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner.4 Core 6 sq mm MJP Mech.CSR 2023-24 / I.No.CB 6-2 / P.No. 51 |
| 183 | Item No.10Copper conductor PVC insulated, Un-armoured control cableSupplying and erecting Un-armoured control cablewith ISI mark stranded / solid copper conductor 1.1 kV grade completeerectedonwall /panel or in provided trench in an approved manner.4 core 2.5 sq mmMJP Mech.CSR 2023-24 / I.No.CB 8-2 / P.No. 53 |
| 184 | Item No.12Pressure Sand Filter and Activated Carbon Filter of FRP / MSEP vessel with suitable thickness to withstand a water pressure including MPV or 5 Valve system and PVC / UPVC / MSEP interconnecting and underdrain piping including fittings, with standard filter media layer. Suitable openings to be provided to ease addition and removal the media.Dia 18 Inch x 65 Inch minimum heightAs per Quotation |
| 185 | Item No.13NaOCl Chlorinator Pump Diaphragm Type / peristaltic type / Solenoid / Max Flow Rate Upto 10LPH Power Source Electric - Phase Single Material PP / PTFE(Teflon) / Voltage 230 Volt / Frequency 50Hz / Mixing Tank of 50 Ltrs capacity- 1 No / Dosing Pump - 2 NosAs per Quotation |
| 186 | Item No.14Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipessuitable for potable water with solvent cementjoints including cost of couplers, as per ISspecification no. 4985 / 1988 excluding GSTlevied by GOI and GOM in all respect, includingtransportation, freight charges, inspectioncharges, loading, unloading, conveyance to thedepartmental stores and stacking the same inclosed shed duly protected from sun rays andrains including cost of jointing material i.e.solvent cement, etc. complete (selffit type to bejointed with cement solvent).Working Pressure 8 Kg/cm263 mmMJP SSR 2023-24 / I.No.1-c / P.No. 74 |
| 187 | 75 mm |
| 188 | 90 mm |
| 189 | Item No.15Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOt & GOM in all respect etc. complete80 mm DiaMJP SSR 2023-24 / I.No.2-a-iii / P.No. 145 |
| 190 | Item No.16Providing and supplying ISl mark CI D/F reflux valves (non-return valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete.Reflux valves as per I.S.5312 Part I (1984)80 mm DiaMJP SSR 2023-24 / I.No12-a-iii / P.No. 144 |
| 191 | Item No.17Lowering, laying, jointing in position following CI/DF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves )80 mm DiaMJP SSR 2023-24 Page No. 148 Item No. 4 |
| 192 | Item No.18Giving satisfactory hydraulic testing of following C.I. D/F Reflex valves, Butterfly valves and Sluice valves.80 mm DiaMJP SSR 2023-24 Page No. 148 Item No. 4 b |
| 193 | Item No.19Bio MediaSupplying of Specially designed Filter media including HDPE bags, Lightweight coco husk size (2-16 mm) and Bio media including mixture of Vermicomposting, cocopeat with special worms per designed quantityAs per Quotation |
| 194 | Operation & Maintenance Charge for 6 months Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
