|
| 1 | Clearing and Grubbing Road Land . Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.(2.03 201 II A) ( Excluding GST) |
| 2 | Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. (3.01 301) ( Excluding GST) |
| 3 | Construction of Embankment with Material Deposited from Roadway Cutting: Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.(3.17 &305) ( Excluding GST) |
| 4 | Construction of Embankment with material obtained from borrowpits : Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. ( 3.2&305) ( Excluding GST) |
| 5 | Granular Sub-Base with Graded Material.Using Crusher Run Construction of granular sub-base using crusher run, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause (4&401+407) ( Excluding GST) |
| 6 | Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(4.14&406) ( Excluding GST) |
| 7 | Prime Coat over WMM/WBMProviding and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 to 1.00 kg/sqm using mechanical means. ( Excluding GST) |
| 8 | Tack Coat on Bituminous surfaces Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.)( Excluding GST) |
| 9 | Graded Bituminous Macadam (DBM) Grading-IProviding and laying Dense Graded Bituminous Macadam (DBM) Grading-I with 100-120 TPH HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder VG-40 @4.00% or as per approved job mix formula which ever is higherby weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification 5th revision clause No. 505 complete in all respects including cost of all materials, T&P, labour, cartage for proper completion of work as per direction of Enginee-in-Charges. ( Excluding GST) |
| 10 | Recycling of Bituminous Pavement with Central Recycling Plant Using by Dense Graded Bituminous Macadam Grading-1Recycling pavement by cold milling of existing bituminous layers, planning the surface after cold milling, reclaiming excavated material to the extent of 30 per cent of the required quantity, hauling and stock piling the reclaimed material near the central recycling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvenators as required, mixing in a hot mix plant, transporting and laying at site and compacting to the required grade, level and thickness, all as specified in clause 519. ( Excluding GST) |
| 11 | Graded Bituminous Macadam (DBM) Grading-IIProviding and laying Dense Graded Bituminous Macadam (DBM) Grading-II with 100-120 TPH HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder VG-30 @4.5% or as per approved job mix formula which ever is higherby weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification 5th revision clause No. 505 complete in all respects including cost of all materials, T&P, labour, cartage for proper completion of work as per direction of Enginee-in-Charges.( Excluding GST) |
| 12 | Providing and laying bituminous Concrete with 60-90 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregrates of specified grading premixed with bituminous binder, @ 5.4 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade. level and alignment and rolling with smooth wheeled vibatory and tandem rollers to achive the desired compaction as per MOTRH specification Clause 509 complete in all respect ( Excluding GST) |
| 13 | Cement Concrete PavementConstruction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement (OPC) 400 kg per cum as per mix design, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation memberane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing including cost of all materials, T&P, labour, cartage for proper completion of work as per direction of Enginee-in-Charges. MoRTH Standard Data book S.No. 6.2 (602)( Excluding GST) |
| 14 | Construction of Earthen shoulders : Construction of earthen shoulders with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slopes and compacted to meet requirement to Table 300-2. As per MoRT&H Specification.(3.18/305) ( Excluding GST) |
| 15 | S/F of Kilometer Stone/Sign Board lettring Painting etc.( Excluding GST) |
| 16 | S/F of Hecto Meter Stone/Sign Board lettring Painting etc.( Excluding GST) |
| 17 | S/F of Big Kilometer Stone/Sign Board lettring Painting etc.( Excluding GST) |
| 18 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet) SI No. 692( Excluding GST) |
| 19 | Excavation in foundation in soil mixed with mooram. Shingle, Kankar requiring the use of special tools and plant such as pickaxes, stables etc. including all lift and all lead including filling, watering and ramming of excavated earth into the trenches and disposal of surplus earth as directed by the Engineer-in-charge. ( Excluding GST) |
| 20 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification Proper Completion of the work Engineer-In-Charge.( Excluding GST) |
| 21 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (PCC M-15)( Excluding GST) |
| 22 | Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (RCC M-30)( Excluding GST) |
| 23 | Reinforced Cement Concrete in Substructure complete as per Drawing and Technical Specifications. (RCC M-30)( Excluding GST) |
| 24 | Reinforced Cement Concrete in Super Structure complete as per Drawing and Technical Specifications. (RCC M-30)( Excluding GST) |
| 25 | Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specification clauses 1000 and 1202.( Excluding GST) |
| 26 | Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification clauses 1002, 1005,1010 & 1202.( Excluding GST) |
| 27 | Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawings and technical specification clauses 1002,1010 & 1202.( Excluding GST) |
| 28 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.( Excluding GST) |
| 29 | Providing and Laying Filter material underneath pitching in slopes complete as per drawing and Technical Specification( Excluding GST) |
| 30 | Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight( Excluding GST) |
| 31 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications ( Excluding GST) |
| 32 | Drainage Spouts complete as per drawing and Technical specification. As per MORT&H SPecification No. 14.9( Excluding GST) |
| 33 | Providing and laying boulder apron and river bed for protech againt seour with stone boulders weighing not less the 40 kg each complete as per drawing and Technical Specification 16.01( Excluding GST) |
| 34 | PCC 1:3:6 in FoundationPlain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days (MoRTH Sl.No. 12.04)( Excluding GST) |
| 35 | RCC Grade M20Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M20( Excluding GST) |
| 36 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. As per Morth Sr.No.9.07( Excluding GST) |
| 37 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. As per MORT&H Clause 9.03( Excluding GST) |
| 38 | Supply/Laying of dry OBB in Hume pipe culvert foundation including all materials, labour and T&P complete.As per SOR CH 20, SI 18( Excluding GST) |
| 39 | Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications.( Excluding GST) |
| 40 | Supply, laying and fixing of NP4 class hume pipes in proper position in culvert. 600mm Dia( Excluding GST) |
| 41 | Supply, laying and fixing of NP4 class hume pipes in proper position in culvert. 1000mm Dia( Excluding GST) |
| 42 | Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications ( Excluding GST) |
| 43 | Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications .( Excluding GST) |
| 44 | White washing with lime on undecorated wall surfaces (Two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drops and loose scales of lime wash and other foreign matters..as per SOR CH 16, (Sl.No. 672)( Excluding GST) |
| 45 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. SOR( Excluding GST) |
| 46 | Retro reflectorised Traffic Sign as per IRC 67-2012 Providing and fixing of retro reflectorised cautionary mandatory and informatory sign as per IRC 67-2012 made of high instensity grade sheeting vide clause 801.3 friced over aluminium sheeting type- IV 1.5mm thick supported on a mild stell angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. The retro reflective sheeting shall be tested shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender.( Excluding GST)i) 60cm equiliteral tringle with diffinitation plate size (20cmX60cm)( Excluding GST) |
| 47 | Retro reflectorised Traffic Sign as per IRC 67-2012 Providing and fixing of retro reflectorised cautionary mandatory and informatory sign as per IRC 67-2012 made of high instensity grade sheeting vide clause 801.3 friced over aluminium sheeting type- IV 1.5mm thick supported on a mild stell angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. The retro reflective sheeting shall be tested shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender.( Excluding GST)iii) 80mmx60mm rectangular with diffinitation (20cmx60cm) Informetory Board( Excluding GST) |
| 48 | Retro reflectorised Traffic Sign as per IRC 67-2012 Providing and fixing of retro reflectorised cautionary mandatory and informatory sign as per IRC 67-2012 made of high instensity grade sheeting vide clause 801.3 friced over aluminium sheeting type- IV 1.5mm thick supported on a mild stell angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. The retro reflective sheeting shall be tested shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender.( Excluding GST)v) 90 cm high octagon( Excluding GST) |
| 49 | Retro reflectorised Traffic Sign as per IRC 67-2012 Providing and fixing of retro reflectorised cautionary mandatory and informatory sign as per IRC 67-2012 made of high instensity grade sheeting vide clause 801.3 friced over aluminium sheeting type- IV 1.5mm thick supported on a mild stell angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. The retro reflective sheeting shall be tested shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender.( Excluding GST)vi) 155x60cm double chevron( Excluding GST) |
| 50 | Retro reflectorised Traffic Sign as per IRC 67-2012 Providing and fixing of retro reflectorised cautionary mandatory and informatory sign as per IRC 67-2012 made of high instensity grade sheeting vide clause 801.3 friced over aluminium sheeting type- IV 1.5mm thick supported on a mild stell angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. The retro reflective sheeting shall be tested shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender.( Excluding GST)vii) 30x90 cm Hazard( Excluding GST) |
| 51 | Supply and Fixing of Linear Delineator System (LDS) Panels made of Micro Prismatic Retro Reflective Sheeting duly laminated of thin aluminium foil to a unique corrugated shape to provide Retro Reflection across wide range of observations and external angles. Eatch LDS panel should be of norminal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly on existing MS railing MS Sections welding as and when required. SOR CH-27 SI-2( Excluding GST) |
| 52 | Supply & Fixing of pavement Makers (Cat Eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) consisting of ASA plastic housing fitted with tightly adherent plotting compound. The housing shall contain prismatic two glass coverd prismatic reflective face to reflect light I/C all taxes. SOR CH-27 SI-5( Excluding GST) |
| 53 | Repeated Bar 5mm high for one set Providing and laying of hot applied Thermoplastic compound 5mm thick including reflectorising slass beads @ 250gms per sqm area, thickness of 5mm is exclusive of surface applied glass beads as per IRC-35. The finished surface to be level, uniform and free from streak and holes.( Excluding GST) |
| 54 | Maintenance Charges for Bituminous Road Part Maintenance Charge including repair of painted surface, earthwork on patri, etc. complete as per direction of E.I. for the period of five years from the actual date of completion of work .For First Year @ Zero% (Excluding GST) |
| 55 | 2nd Year @ 0.25% (Excluding GST) |
| 56 | 3rd Year @ 0.50% (Excluding GST) |
| 57 | 4th Year @ 0.75% (Excluding GST) |
| 58 | 5th Year @ 1.00 % (Excluding GST) Please Enable Macros to View BoQ information |
