|
| 1 | Material and labour for Cleaning of Raw sewage sump of any size and depth/ Stilting Chamber by opening sewage transfer pipes/ Clarisetter with rotating blades/ aerator section/mixing chamber/treated water tanklocated at sewage treatment plant with sewage collection machine and dewatering the balance sludge withman power and T&P (Tools and plants) such as pump set for De-watering, tripod, chain pully, rope, steel bucket, phawara etc all required for completion of Job for cleaning upto bottom of the sump/ tank/ chamber/ section etc and taking out all clay/sludge/mud/stone pieces and other material deposited in the sewage sump/ chamber/ tank/ section during course of time and removing deposited material to a distance from 50 mtr of the site including cleaning and greasing, painting of all motors inside the sump at 1 MLD STP Bambolim camp complete all as specified and directed by Engr-in-Charge.Note: All dewatering pumps accessories includes in Item rate, During the process of cleaning sewage vechile to be provided by the contractor complete all as specified and as directed. |
| 2 | Material and labour for Cleaning of raw sewage sumps/ wells of any size and depth in any location at Bambolim Mil camp by usingsewage collection machine including dewatering and removing the balance sludge with man power and by usingnecessary T&P required at site such as pump set for De-watering, tripod, chain pully, rope, steel bucket, phawara etc for completion of Job for cleaning upto bottom of the well and taking out all clay/sludge/mud/stone pieces and other material deposited in the sewage well during course of time and removing deposited material to a distance from 50 mtr the site of wellincluding cleaning and greasing, painting of all submersible pumps &moter insidecomplete all as specified and as directed. |
| 3 | Material and labour for scrapping/cleaning of outer surfaces of Air Blower/ Treated water pumps/ pressure feed pumps/ clarisetter motor/ gear set and other motors and spray painting with two coats of best qualitiy sythetic enamel paint over one coat of red oxide primer(colour as per approval of Engr-in-Charge) complete including writing of MES No complete all as specified and as directed. |
| 4 | Material and labour for applying painting with one Coat of synthetic enamel paint of approved colour on centrifugal pump set of capacity from 20 HP to 60 HP including inlet, outlet mains, coupling, sluice valve, non-return valve, base plate, pulley with safe guard, vacuum pipe line, starter panel board and writing the MES/ SM number with black paint of suitable size of letters including complete removal of existing old painted surfaces by washing, rubbing down and painted surfaces complete all as specified and directed.Note: Painting of suction line, pump & motor, sluice valve, NRV and delivery line inside the pump house shall be treated as one Job |
| 5 | Material and labour for painting to steel structure/ LT panels with approved colour of synthetic enamel paint one coat by using spray gun machine including preparation of old painted surface complete all as specified and directed. Note: Quoted rate is deemed to be inclusive of necessary repairs lik welding the doors/ hinges to panel board doors and other misc. petty repairs as required at site complete all as specified and as directed. |
| 6 | Material and labour for scrapping/cleaning of outer surfaces of Pipes of any size and any type and Headers and spray painting with two coats of best qualitiysythetic enamel paint over one coat of red oxide primer(colour as per approval of Engr-in-Charge) complete including marking and writing details complete all as specified and as directed. |
| 7 | Material and labour for repair of automated sewage treatment panel by attending the complaint and replacing the defective parts of same and testing complete all as specified and as directed. Note: The quoted rate is deemed to be inclusive of misc items like wires of suitable gauge, lugs, bolts and nuts, screws and other misc items required at site. The necessary contactors, relays and control MCB\"s shall be measured and paid separatelycomplete all as specified and as directed. |
| 8 | Voltage monitering relay |
| 9 | Contractor 4 pole 25 Amps |
| 10 | Elmex Contractor of size 16 sqmm |
| 11 | Elmex Contractor of size 4 sqmm |
| 12 | Copper wire of size 1.5 sqmm |
| 13 | Labour only for dismantling the Blower set complete of up to 30 HP and carrying out repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskitetc complete all as directed and reassmebling, testing & commissioning complete.Note : Spare shall be measured and paid separately. Note Item Rate Include Allinment of Shaft , Servicing of Motar, servicing Of Blower, Servicing of Gear Box,Grease Required at job Work include in unit Rate.complete all as specified and directed. |
| 14 | Bearing. |
| 15 | Gasket Set |
| 16 | Gear Assembly Set |
| 17 | Oil Seal set |
| 18 | O ring Set |
| 19 | Gear Oil |
| 20 | Material and labour for overhauling the sewage pump set (non-clogging) capacity 5 HP, 3 phase by removing from the sewage sump,machining the shaft, replacement of gaskets, oil seals, SS nuts, bolts and washers replacement of protection pipe clamps, gun metal bushes and filling the shaft protection pipe with adequate quantity of lubricating oil, re-assembling & re-fixing in position the same including testing and commissioningetc complete all as specified and as directed. |
| 21 | All as per item No 20.00 above but for pump set of capacity7.5 HP, 3 phase. |
| 22 | All as per item No 20.00above but for pump set of capacity8 HP, 3 phase. |
| 23 | All as per item No 20.00above but for pump set of capacity10 HP, 3 phase. |
| 24 | All as per item No 20.00above but for pump set of capacity25 HP, 3 phase. |
| 25 | Supply and fix submersible cable 3 core 6 Sqmm multi stranded copper conductor against unserviceable existing cable. |
| 26 | Material and labour for dismantling the dozing pump set with motor complete after disconnecting the electric connections from panel board and transporting the same to workshop & opening electric motor and taking out complete parts and cleaning the slot, repairing/replacing the rotor assembly with bearing bracket & tolerance ring, replacing of pumping tube, injection check valve 3/8\" re-assembling & re-fixing in position the same including testing and commissioningetc complete all as specified and directed. |
| 27 | Material and labour for fabrication and fixing of pump set base frame using MS channel ISMC 100 including two coat of synthetic enamel paint over a coat of red oxide primer and dismantling the corroded and damaged base frame for pump set of capacity 5 HP to 30 HP etc complete all as specified and directed. |
| 28 | Supply and fix in repairs DOL starter including contactors, relays & coil, three phase suitable for pump sets of capacity 2.5 to 6.5 HP with relay range 3-8 Amp etc complete all as specified and directed. |
| 29 | Supply and fix in repairs DOL starter including contactors, relays & coil, three phase suitable for pump sets of capacity 7.5 HP with relay range 13-22 Amps etc complete all as specified and directed. |
| 30 | Supply and fix in repairs automatic star-delta starter 3 phase 400/440 volt including contactors, relay, coil etc suitable for pump sets of 7.5 to 10 HP etc complete all as specified and directed. |
| 31 | Supply and fix in repairs automatic star-delta starter 3 phase 400/440 volt including contactors, relay, coil etc suitable for pump sets of 10 to 15 HP etc complete all as specified and directed. |
| 32 | Supply and fix in repairs automatic star-delta starter 3 phase 400/440 volt including contactors, relay, coil etc suitable for pump sets of 15 to 30 HP etc complete all as specified and directed. |
| 33 | Supply and Fix overload and single phasing Relay suitable for 9-13 Ampcomplete all as specified and as directed.Make: Havells/ Siemens/ L&T/ Schneider. |
| 34 | Supply and Fix Contactor suitable for 240V, 25 Acomplete all as specified and as directed.Make: Havells/ Siemens/ L&T/ Schneider. |
| 35 | Supply and fix MCCB TPN 32 Ampcomplete all as specified and directed.(Make : L&T, Havells) |
| 36 | Supply and fix LED phase indicator lamps RYB (set of three) complete all as specified and directed. (Make : L&T, Siemens, Meco) |
| 37 | Taking down/ dismantling old unserviceable pump set of any capacity in any location after disconnection of all electrical connections and transporting to the reputed work shop of capacity up to 7.5 HP pump sets for repair/ rewinding the motor, replacement of rotor bearings of suitable size, repairs to the rotor shaft and refixing the same in same or other location where specified after completion and testing and commisioning all as specified and as directed.Note:The quoted rate is deemed to be inclussive of necessary misc fixing accessories like bolts, nuts and washers, glands, oiling, greasing etc required at site complete all as specified and as directed. |
| 38 | All as per Item sl No- 37.00 above but for capacity of pump sets from 7.5 HP to 15 HP. |
| 39 | All as per Item sl No- 37.00 above but for capacity of pump sets from 25 HP to 40 HP. |
| 40 | Material and labour for removing the unserviceable copper winding and rewinding with same gauge super enameled copper winding wire, assembling motor and fitting back to original position testing and commissioning for motor capacity upto 7.5 HP all as specified and directed (Note : Approximate copper winding required 7.00 Kg for each motor) |
| 41 | All as per item No 40.00 above but for motor capacity 10 HP 3 phase (Note : Approximate copper winding required 8.5.00 Kg for each motor) |
| 42 | All as per item No 40.00 above but for motor capacity 15 HP 3 phase(Note : Approximate copper winding required 12.5 Kg for each motor) |
| 43 | All as per item No 40.00 above but for motor capacity 25-30 HP 3 phase30 HP 3 phase (Note : Approximate copper winding required 21.5 Kg for each motor) |
| 44 | Material and labour for opening the submersible pump sets ofany capacity for minor repair and servicing by replacing worn out bearings, gun metal bushes, removing the impeller and re-fixing after repairing shaft and re-assembling the same with necessary nut bolt, packing etc complete all as specified and directed. |
| 45 | Material and labour for removing the burnt winding from the cores of submersible pump of capacity ranging upto 5 HP and rewinding with same gauge super enameled copper winding wire complete all as specified and as directed. |
| 46 | Material and labour for removing the burnt winding from the cores the submersible pump of capacity ranging exceeding 5 HP to 10 HP and rewinding with same gauge super enameled copper winding wire complete all as specified and as directed. |
| 47 | Material and labour for removing the burnt winding from the cores the submersible pump of capacity ranging exceeding 10 HP to 15 HP and rewinding with same gauge super enameled copper winding wire complete all as specified and as directed. |
| 48 | Material & Labour only for dismantling the pump set complete of 25/12.5/7.5/5 HP and carrying out repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade , greasing of bearing, replacement of gaskitetc complete all as directed and reassmebling, testing & commissioning completeall as specified and as directed.Note : Spare shall be measured and paid separately. |
| 49 | Supply and fix in repair of following parts for existing centrifugal pump set electric driven 3 phase 415 volt 30/25/12.5/7.5/5/2 HP having discharge completeall as specified and as directed. |
| 50 | Motor bearing No. 6312 of Make SKF/NBC/TATA/FAG/UBC. |
| 51 | Motor bearing No. 6212 of Make SKF/NBC/TATA/FAG/UBC. |
| 52 | Motor cooling fan |
| 53 | Pump motor MS coupling |
| 54 | Suitable spider. |
| 55 | Cover bolts & washers |
| 56 | Pump bearing No. 6307 of Make SKF/UBC/TATA/FAG/NBC |
| 57 | CI impellar suitable forcentrifugal pump set. |
| 58 | CI Gland packing chaplla |
| 59 | SS Sleeve (Gland Sleeve) |
| 60 | Pump shaft with studs and nuts for pump body. |
| 61 | Starter relay of Make : Jyoti, Range 36-60 |
| 62 | Magnet coil of Make Jyoti. |
| 63 | Starter timer of Make : Jyoti |
| 64 | Starter copper contact set |
| 65 | Gland Packing |
| 66 | Bearing grease AP-3 Make : Castrol |
| 67 | Supply and Fix ERW (Electric Resistance Welded) pipes in any length any location having nominal bore of 80 mm, heavy duty 4.85 mm thick with plain ends confirming to IS 1239 (Part-1)-2004 cutting, welding, jointing etc complete all as per site requirement and as specified and directed.Note: (i) The quoted rate is deemed to be inclussive of cutting at required length, grinding, welding and making leake proof jointsand including painting with suitable synthetic enamel paint over a coat of red oxide etc complete. (ii) Quoted rate also includes MS long bens with plain ends of any degree, MS tees Plain ends as required at site and the same are measured in RM for the payment purpose.(iii) MS Flanges of suitable size shall be measured and paid separately. |
| 68 | All as per item No 67.00 above but for nominal bore of 100 mm. |
| 69 | Supply and Fix Cast iron body butterfly valve PN-16 ISI marked, heavy duty suitable to fix MS/GI pipe in any position of size up to 80 mm dia including fixing arrangements as required at site including necessary Bolts, Nuts and rubber packing setc complete all as specified and as directed. |
| 70 | All as per item No 69.00 above but for 100 mm dia. |
| 71 | Supply and install double flanged non return valve 80mm dia, Swing check-up, Single door pressue upto 1.6 PN conforming to IS: 5312 (Part I) having cast iron body & gun metal working parts with nut, bolts, gaskets etcandtestedto1.5timesofworkingpressureasapprovedoffollowingsizesofreflux withby pass arrangement complete all as specified & directed. |
| 72 | Supply only poly electolyte chemical for disinfection of raw sewage water, ISI marked complete all as specified and as directed. |
| 73 | Supply only alum ferric base chemical for disinfection of raw sewage water, ISI marked complete all as specified and as directed. |
| 74 | Supply only poly aluminium carbon chemical for odour removal of treated sewage water, ISI markedcomplete all as specified and as directed. |
| 75 | Supply only sodium Hypochlorite 5.25% (bleach concentrate for treated sewage water, ISI markedcomplete all as specified and as directed. |
| 76 | Supplyonly of Orthodoline solution bottle in 500 ml for chlorine testingcomplete all as specified and as directed. |
| 77 | Supply and Fix MS flanges standard size, heavy duty of size 80 dia suitable for threaded/ weldedto MS pipe all as specified and as directed. |
| 78 | Supply and Fix MS flanges standard size, heavy duty of size 100 dia suitable for threaded/ weldedto MS pipe all as specified and as directed. |
| 79 | Material and labour of PVC flexible pipe (heavy duty) of size 50 mm dia for sewage system, ISI markedcomplete all as specified and as directed. |
| 80 | S&F of submersible flat copper stranded cable 1100 Volt grade of size 10 sqmm 3 core complere all as specified and directed. |
| 81 | Supplying, laying or fixing, in repairs, jointing and testing LT under ground electric power cableCrossed linked polyethylene ( XLPE Cable)insulated, galvanised steel strip or wire armoured,ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 70 sqmm cross sectional area, 3 1/2 core, complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc |
| 82 | Supplying, laying or fixing, in repairs, jointing and testing LT under ground electric power cableCrossed linked polyethylene ( XLPE Cable)insulated, galvanised steel strip or wire armoured,ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 50 sqmm cross sectional area, 3 1/2 core, complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc |
| 83 | Material and labour for Site clearance by cleared for shrubs, vegetation, cutting of grass, bush, wood trees, sapling not exceeding 30 cm girds with roots and levelling of area and removal of same out side MD landcomplete all as specified and as directed. |
| 84 | Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit ndot less than2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts and washers made out of GI/steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board/switch board/control board all shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc complete. |
| 85 | M & O forSTP Land Sewage lifting wells installed at various Bambolim by deputing two FGM ofSTP Plant per shift for timing of two shifts (i e 0600 hrs to 1400 hrs & 1400hrs to 2200 hrs ) including daily cleaning of surrounding Area,for smooth functioning, checking ofmotor,pump starter etc. any damage. & any breakdown shall be immediately inform to concernedJE/AGE E/M as specified and directed.Location: STP Plant/sewage sump wells(i) The contractor shall pay to the staff per month in their bank account through online and statement and statement of bank account shall be submitted to GE for verification while claiming interim payment.NO offline Payment will be accepted except for the 1st month(ii) The rates quoted shall be deemed to be inclusive of minimum wages as latest notification issued by Govt of India/ Sate Govt /Local body which ever is higher as on bid submission end date as described in Sch \"A\" note . (iii) Minimum wages shall be applicable for Semi-skilled workers category as per latest revised wages of labour as fixed byGovt of India/ Sate Govt /Local body which ever is higher as on bid submission end date.(iv) Contribution towards EPF, ESIC, and Bonus shall be paid in RAR and Final Bill only after submission of valid and authenticate documents in support of proof of payment by the contractor failing which payment against these heads shall not be made.(v) fgm must have wear uniform and safety shoes with necessary tools on duty time.(vi) Duty roster, daily log book and attendance register to be compulsory maintain and update regularly.(vii)stp sumpmust be keep cleaned and presentable conditions including surrounding area.(viii).Contractor should provide mobile phone to the operator with proper recharge for emergency contact to MES Authority(ix)The operator Should be always present at stp plant for smooth function of the same in shift including sunday and holidays demed to be included Quoted rates.(x)The Operator Should always ready to attend the intercom phone for any type of Emergency |
