|
| 1 | NOTES :- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 50% of materials with him till the completion of item/date.2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay.3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station.4. If any painting works, contractor need to clean the area and remove the drop marks from floor, doors, windows, sills, inbuilt furniture items etc. otherwise a recovery of Rs 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. |
| 2 | Dismantling timber scantlings 40 Sqcm and over unframed work in fillets, rails, posts, rafters, purlins, etc. in section and in any position. |
| 3 | Dismantling fencing wire mesh, any type |
| 4 | M&L forMS angle iron conforming to Fe- 290(Gde E 165) as in fencing post Complete all as specified and as directed |
| 5 | Excavating in post holes in hard/dense soilnot exc. 0.50 cumand getting out, return filling and removing surplus soil to a distance not exc. 50 mtrs and making good disturbed ground Complete all as specified and as directed |
| 6 | M&L for PCC 1:2:4 type B2 ( using 40 mm graded aggregate) for angle iron post Complete all as specified and as directed |
| 7 | Supply ony Chain link of sizeMS galvanised fencing any size or type Complete all as specified and as directed |
| 8 | Fixing onlychain link fencingincluding line wires, any mesh, size and type to any type ofstandard, rails, straining bolts etc., including provision of binding wire Complete all as specified and as directed |
| 9 | M&L for Mild steel round bars 10 mm dia and over,cut to length, bent to required shape including cranking, hooking ends and securing with welding with 10 cm overlaping between two bar all as specified and directed by Engineer-in Charge as in in reinforcement. |
| 10 | M&L for Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) Complete all as specified and as directed |
| 11 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15mm Complete all as specified and as directed |
| 12 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlarfacings, dressed stonework and precast concrete articles complete all as specified and directed |
| 13 | M&L Pre-cast cement concrete block masonry of type C1 1:3:6 (20mm graded aggregate) set in CM 1:4 with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed. |
| 14 | M&L 15 mm thick Rendering cement plaster 1:4 on fair faces of brick masonary or concrete surfaces finished even and smooth complete all as specified and directed. |
| 15 | M&L for 3 coats of White washing over a coat of primer with white or tinted on walls complete all as specified and as directed. |
| 16 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 17 | Demolition of cement concrete of any description laid in any position and remove the debris out MOD land complete all as specified and directed. |
| 18 | Dismantling floor, hearth or wall tiling & terrazoo including cement mortar bedding (but not backing) and rubbish off the premises. |
| 19 | M&L 25 mm thick PCC(1:2:4 )type B0 using 12.50 mm graded stone aggregate as in floor all as specified and directed. |
| 20 | M&L Vitrified Endura Tiles (Parking, Flooring, Path and other purposes) of any shade (10-12) mm thick (square/ rectangular) polished, area of each tiles exc 0.09 sqm and n exc 0.16 Sqm, in floors etc along with screed bed or bedding layer in CM 1:6 of mortar 15 mm thick for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 21 | M&L for 75 mm thick cement concrete type C2 (1:3:6) (using 20mm graded aggregate) as in plinth protection in alternate bays not more than 3.0mtr length with joints between panels is 12mm wide will be filled with1 part ofheated bitumen 85/25 grade and 3 parts of sand complete all as specified and directed. |
| 22 | M&L for PCC flooring work 40mm thick type B1 1:2:4 (20mm graded aggregate) finished even and smooth using extra cement as directed. |
| 23 | M&L Double charged/ Glazed Vitrified Ceramic tiles of light/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 24 | M&L Double charged/ Glazed Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, with 10mm thick screed bed or bedding layer in CM 1 : 4 for skirting in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 25 | M&L Non-skid Ceramic tiles (Rectified tiles) of 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, approved 1st qualityin floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed. |
| 26 | M&L Non-skid Ceramic tiles (Rectified tiles) of 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm approved 1st qualityin floors etc along with rendering of 10mm thick in CM 1:4 to stone/ brick masonry, scoured for fixing tiles/ stone slabs as in skirting/dados in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed. |
| 27 | M&L Non skid ceramic tiles of 7 to 8 mm thick(square/ rectangular) area of each the exceeding 0.11 sqm but not exceeding 0.18 sqm,of approved 1st qualityin floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed. |
| 28 | M&L Non skid ceramic tiles of 7 to 8 mm thick(square/ rectangular) area of each the exceeding 0.11 sqm but not exceeding 0.18 sqm with 10mm thick screed bed or bedding layer in CM 1 : 4 for skirting in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 29 | Removing excavated/demolished material exc 250 m n.exc 500m or out of MOD land and depositing where directed. |
| 30 | Dismantling of Stone slabs and tiles of any description or thickness laid dry or laid dry and pointed complete as directed. |
| 31 | M&L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 10mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed |
| 32 | M&L 15-20 mm thick Sadarahalli Stones slab (of any type), any colour, Polished bedded over cement screed bed 10mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed |
| 33 | Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situationcomplete all as specified and directed. |
| 34 | M&L Hardcore of gauge exc. 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface complete all as specified. |
| 35 | M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed. |
| 36 | M&L 50mm sand filling under floor or in foundations including watering and consolidation all as specified and directed. |
| 37 | M&L Machine pressed precast conctete Interlocking paver blockwith grey cement and colour pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 all as specified and directed. |
| 38 | M&L Machine pressed precast conctete Interlocking paver blockwith grey cement and colour pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade all as specified and directed. |
| 39 | M&L Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry colour to match in floors including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes of cement plaster with cement motor 1:4 complete all as specified and as directed. |
| 40 | M&L Providing, cement concretein roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed. |
| 41 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including Excavation, RFR, making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 42 | S&F water closet \"S\" trap Ivory colour 680 x 370x 750mm with soft close seat cover with twin flusing cistern fitted on floor with wall distance 225mm +/- 10mm from the wall complete all as specified and directed Make:CERA/Parryware or equivalent |
| 43 | S&F Stainless Steel Pegset of 4 No Pegs fixed withand including CP brass screws and wooden/Plastic cleats and fixed complete all as specified and directed. |
