Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling and taking out carefully old Unserviceable/Worn Out/broken components of Wooden/Steel Furniture without damaging the remaining serviceable members, furniture and Supplying and Fixing of the same with new components such as Prelaminated MDF Board, Exterior Grade, One side decorative lamination and other side balancing white conforming to IS – 14857, Plywood BWR Grade conforming to IS – 303, Decorative laminate sheets, Mild Steel Sections, Iron mongery fittings, Glass fixing/fittings, Builders Hardware, Tapestry Cloth, Foam, Plastic Cane, Cotton/Nylon Newar etc.and Wood Work made of1st Class Hard Wood (Teak Wood), seasoned, free from knots and cracks, wrought finished including tightening the joints, pinning, screwing, nailing, wedging, applying putty, gluing, providing hinges,handles/knobs, polishing/painting the entire article with standard workmanship complete to its original shape and size all as shown on drawings,as specified,as brief description of items and as directed by Engr-in-Charge. All furniture items shall be painted/polished only after completing all repairs and renewals etc. The furniture shall be repaired/ renewed, Painted/Polished on site at Officers Married Accommodation after completion of BR/EM Welcome Maintenance works. Work will be executed inside the Barrack Store Yard of GE(NB) Vizag and at various sites as per requirement as directed by Engr-in-Charge without fail. All materials to be incorporated in the work shall conform to the latest IS Specification. Anti-termite and anti-bug treatment shall be done before polishing the wooden furniture. Rate quoted is deemed to be including the same. |
| 2 | M & L for painting to CHAIR DINING MS TUBE STEEL WITH PLY [SAILOR J & K SECTOR] by one coat of synthetic enamel paint of approved 1st quality by spray machine to match with existing colour/shade after preparation of surface to steel surfaces of the chairand fill uneven surfaces with puttycomplete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. TP/CCE-SK-18). |
| 3 | M & L for repair to CHAIR DINING MS TUBE STEEL WITH PLY [SAILOR J & K SECTOR] by Taking out old pressed /torn cushions from each seat and Supply of 40 density,50mm thick PU foam cushion of size 400mmx430mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per meter of approved color made to shape duly finishing the surfaces/edges smooth and fixed with four screw and nuts, bolts to lower edge frame tightly all as shown on drawing, as specified and as directed by Engr-in-Charge (Drg No. TP/CCE SK-18). |
| 4 | M & L for Repairs to CHAIR DINING MS TUBE STEEL WITH PLY [SAILOR J & K SECTOR] by taking down the existing broken MS pipe of 20 mm dia and replacing the same with new MS pipe 20 mm dia of 350 mm length bent to curve shapeand fix with arc welding with smooth edge finish jointing rear leg/back rest framesall as shown on drawing, as specified and as directed.(Drg No. TP/CCE SK-18) |
| 5 | M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (size 30x55x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-279). |
| 6 | M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (size 30x65x460mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-279). |
| 7 | M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable seat side rail carefully without disturbing the adjoining partsSupply and fixing of new seat side rail (size 30x65x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-279). |
| 8 | M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable front rail carefully without disturbing the adjoining partsSupply and fixing of new front rail (size 30x65x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-279). |
| 9 | M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable rear rail carefully without disturbing the adjoining partsSupply and fixing of new rear rail (size 30x65x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-279). |
| 10 | M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side Stiffner (size 20x25x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) |
| 11 | M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre Stiffner (size 20x25x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-279). |
| 12 | M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 45x15mm curved out of size 45x35x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing,as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-279). |
| 13 | M & L for repair to CHAIR DINING (rectangular pattern) by Taking out u/s worn out cane from each seat and S&F new seat of 40 density,75mm thick PU foam cushion of size 440mmx430mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-279). |
| 14 | M & L for Polishing to CHAIR DINING (rectangular pattern) with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship all as directed by Engineer-in-charge and as specified (Drg No. FD-279). |
| 15 | M & L for repair to CHAIR DINING (Square Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (size 65x45x890mm with upper end to be chamfered at 45 degree and lower ende at 25x25mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-203/228). |
| 16 | M & L for repair to CHAIR DINING (Square pattern)by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (size 45x45x460mm with lower end size 25x25mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-203/228). |
| 17 | M & L for repair to CHAIR DINING (Square pattern)by taking down/removing the existing broken /unserviceable Back rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 45x15mm curved out of size 45x35x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-203/228). |
| 18 | M & L for repair to CHAIR DINING (Square pattern)by taking down/removing the existing broken /unserviceable Side/Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side/Centre Stiffner (size 25x20x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-203/228). |
| 19 | M & L for repair to CHAIR DINING (Square pattern) by Taking out u/s worn out cane from each seat and S&F new seat of 40 density,75mm thick PU foam cushion of size 440mmx430mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-203/228). |
| 20 | M & L for Polishing to CHAIR DINING (Square pattern) with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship all as directed by Engineer-in-charge and as specified (Drg No. FD-203/228). |
| 21 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (size 25mm dia at bottom, 45mm dia at entre and 25mm dia at top made out of 65x45x865mm with upper end to be chamfered at 45 degree) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-16). |
| 22 | M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining partsSupply and fixing of new Front leg (size 25mm dia at bottom, 45mm diatop made out of 45x45x460mm with upper end to be chamfered at 45 degree) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-16). |
| 23 | M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Front rail carefully without disturbing the adjoining partsSupply and fixing of new Front rail (size 65x30x420mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-16). |
| 24 | M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Rear rail carefully without disturbing the adjoining partsSupply and fixing of new Rear rail (size 65x30x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-16). |
| 25 | M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Side rail carefully without disturbing the adjoining partsSupply and fixing of new Side rail (size 65x30x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-16). |
| 26 | M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Side stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side stiffner (size 25x19x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-16). |
| 27 | M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Centre stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre stiffner (size 25x19x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-16). |
| 28 | M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 45x12 curved out of size 50x30x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-16). |
| 29 | M & L for repair to CHAIR DINING (Circular pattern) by Taking out u/s worn out cane from each seat and S&F new seat of 40 density,75mm thick PU foam cushion of size 440mmx430mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-16). |
| 30 | M & L for Polishing to CHAIR DINING (Circular pattern) with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship all as directed by Engineer-in-charge and as specified (Drg No. FD-16). |
| 31 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 55x25x490mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 32 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining partsSupply and fixing of new Front leg (Size 55x25x545mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 33 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Side Rail (Size 70x40x575mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 34 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Front Rail (Size 55x25x510mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 35 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Rear Rail (Size 50x25x480mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 36 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Frame carefully without disturbing the adjoining partsSupply and fixing of new Back Frame (Size 55x20x480mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 37 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Bottom Frame carefully without disturbing the adjoining partsSupply and fixing of new Back Bottom Frame (Size 55x40x480mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 38 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Side Frame carefully without disturbing the adjoining partsSupply and fixing of new Back Side Frame (Size 70x25x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 39 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Wooden Member carefully without disturbing the adjoining partsSupply and fixing of new Wooden Member (Size 20x15x440mm) screwed to side frame made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 40 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 65x25x610mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 41 | M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Front/Back Base Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Front/Back Base Stiffner (Size 55x25x510mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 42 | M & L for repair to CHAIR EASY (Rectangular Pattern) by Taking out u/s worn out cane from each seat and S&F new seat of 40 density,75mm thick PU foam cushion of size 575mmx510mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 43 | M & L for repair to CHAIR EASY (Rectangular Pattern) by Taking out u/s worn out cane from each back and S&F new back of 40 density,50mm thick PU foam cushion of size 480mmx440mmx50mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 44 | M & L for Polishing to CHAIR EASY (Rectangular Pattern) with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-229). |
| 45 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Rear/Front leg carefully without disturbing the adjoining partsSupply and fixing of new Rear/Front leg (Size 40mm dia at Centre & top and 20mm dia at bottom out of 40x40x490mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge(Drg No. FD-17). |
| 46 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Side Rail (Size 70x25x530mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-17). |
| 47 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Front Rail (Size 55x25x520mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-17). |
| 48 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Rear Rail (Size 50x25x480mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-17). |
| 49 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Back Frame carefully without disturbing the adjoining partsSupply and fixing of new Back Frame (Size 55x19x480mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-17). |
| 50 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Side Frame carefully without disturbing the adjoining partsSupply and fixing of new Side Frame (Size 25x70x530mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) |
| 51 | M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 65x25x600mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-17). |
| 52 | M & L for repair to CHAIR EASY (Circular Pattern) by Taking out u/s worn out cane from each seat and S&F new seat of 40 density,75mm thick PU foam cushion of size 575mmx510mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-17). |
| 53 | M & L for repair to CHAIR EASY (Circular Pattern) by Taking out u/s worn out cane from each back and S&F new back of 40 density,50mm thick PU foam cushion of size 480mmx440mmx50mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per metre of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-17). |
| 54 | M & L for Polishing to CHAIR EASY (Circular Pattern) with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-17). |
| 55 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (Size 30x55x660mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 56 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 30x55x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanshipcomplete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 57 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat SideRail (Size 30x65x535mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 58 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Rear Rail (Size 30x65x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 59 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Front Rail (Size 30x65x535mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 60 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Side stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side stiffner (Size 25x20x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 61 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Centre stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre stiffner (Size 25x20x535mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 62 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 50x15mm curved out of size 50x35x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 63 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 60x25x520mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 64 | M & L for repair to CHAIR WRITING (Rectangular Pattern) by Taking out u/s worn out cane from each seat and S&F new seat of 40 density,75mm thick PU foam cushion of size 535mmx470mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per meter of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 65 | M & L for Polishing to CHAIR WRITING (Rectangular Pattern) with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-280). |
| 66 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (Size 25 mm dia at both ends and 45 mm dia at centre made out of size 45x45x685mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-20). |
| 67 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 25 mm dia at bottom, 20 mm dia at top and 45 mm dia at centre made out of size65x45x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-20). |
| 68 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Side stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side stiffner (Size 25x19x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-20). |
| 69 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Centre stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre stiffner (Size 25x19x515mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-20). |
| 70 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining partsSupply and fixing of new FrontRail (Size 30x65x515mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-20). |
| 71 | M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 55x19x480mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-20). |
| 72 | M & L for repair to CHAIR WRITING (Circular Pattern) by Taking out u/s worn out cane from each seat and S&F new seat of 40 density,75mm thick PU foam cushion of size 515mmx470mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per meter of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-20). |
| 73 | M & L for Polishing to CHAIR WRITING (Circular Pattern) with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-20). |
| 74 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (Size bottom 25x25mm out of 45x45x715mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 75 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size Bottom 25x25mm out of60x45x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 76 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side Stiffner (Size 25x20x420mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 77 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre Stiffner (Size 25x20x535mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 78 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Front Rail (Size 30x65x535mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 79 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Rear Rail (Size 30x65x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 80 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Side Rail (Size 30x65x420mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 81 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 20x15mm curved out of size 50x30x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 82 | M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 60x25x425mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 83 | M & L for repair to CHAIR WRITING (Square Pattern) by Taking out u/s worn out cane from each seat and S&F new seat of 40 density,75mm thick PU foam cushion of size 535mmx470mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per meter of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 84 | M & L for Polishing to CHAIR WRITING (Square Pattern) with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-202/250). |
| 85 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 55x30x835mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-285). |
| 86 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (Size 55x30x455mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-285). |
| 87 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Side Rail (Size 30x65x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-285). |
| 88 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Seat Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Front Rail (Size 65x30x445mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-285). |
| 89 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Seat Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Rear Rail (Size 65x30x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-285). |
| 90 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side Stiffner (Size 20x25x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-285). |
| 91 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre Stiffner (Size 20x25x445mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-285). |
| 92 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (Size 50x15mm out of size 50x35x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) |
| 93 | M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining parts and S&F new seat of 40 density,75mm thick PU foam cushion of size 445mmx440mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per meter of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-285). |
| 94 | M & L for Polishing to CHAIR WOODEN BOTTOM with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-285). |
| 95 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 30x55x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 96 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining partsSupply and fixing of new Front leg (Size 30x55x460mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 97 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Side Rail (Size 30x65x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 98 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Seat Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Front Rail (Size 65x30x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 99 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Seat Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Rear Rail (Size 65x30x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 100 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side Stiffner (Size 20x25x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 101 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre Stiffner (Size 20x25x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 102 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (Size 45x15mm out of 45x35x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 103 | M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining partsSupply and fixing of new seat of 40 density,75mm thick PU foam cushion of size 445mmx440mmx75mm duly covered with inner linen cotton cloth and best tapestry cloth not less than Rs 250.00 per meter of approved color and shade placed over a hard wood frame around, duly fixed with counter sunk screws or fix over additional support frame duly provided from centre to centre complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 104 | M & L for Polishing to CHAIR DINING JCO (MAP) with two or more coats of French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6/MAP/05). |
| 105 | CHAIR CBT STEEL WITH ARMS/ WITHOUT ARMS : FD-75 (M)S&F following components of chair CBT steel with arms/without arms including dismantling taking out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. |
| 106 | Dismantling, taking out carefully old existing seat of any description & replacement of the same with S&F new seatmade out of 12 mm thick Plywood BWR Grade ISI marked covered with 50mm thick PU form and best quality PU leather cloth of rate ranging Rs 250/- as well seat should be fixed through 02 Nos MS stiffner size 25mmx4mm(duly two coat of gray enamel paint over a coat of red oxide primer) & suitable Nut/BoltScrews with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge, Make of Ply :-Greenply,Century, Kitply (Drg No. FD-75(M). |
| 107 | Dismantling, taking out carefully old existing back of any description & replacement of the same with S&F new backmade out of 12 mm thick Plywood BWR Grade ISI marked covered with 50mm thick PU form and best quality PU leather cloth of rate ranging Rs 250/- as well bsack should be fixed through 02 Nos MS stiffner size 25mmx4mm(duly two coat of gray enamel paint over a coat of red oxide primer) & suitable Nut/BoltScrews with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge, Make of Ply :-Greenply,Century, Kitply (Drg No. FD-75(M). |
| 108 | Replacement of Arms rest with S&F new Arms rest made out of black integral skin polyurethne reinforced with MS insert and shall be scratch and weather resistance of chair briefing static baised with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-75(M). |
| 109 | Replacement of shoe/Cap with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws for bottom of MS Pipe frame and Plastic End Cap suitable for top of MS Pipe frame with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge (Drg No. FD-75(M). |
| 110 | M&L for two coats of Gray synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the chair CBT steel with arms/without arms, paint them through a spray machine to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge, Make of Paint: Asian/Berger/Nerolac (Drg No. FD-75(M)). |
| 111 | M & L for repair to CHAIR CB STEEL WITH ARM AND WITHOUT ARM by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 25mm dia conduit of 1.6mm thick, fixed by proper gas welding and applying one coat of red oxide zinc chrome primer to the external surfaces of new conduit after preparation of surfaces with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD-75(M). |
| 112 | CHAIR VERANDAH (MS STRIP)(Drg No. FD/E6MAP/11) |
| 113 | M & L for repair to CHAIR VERANDAH (MS STRIP) by taking down/removing the existing broken /unserviceable rusted mild steel strip from the chair carefully and S & F new mild steel strip of 375mm long, 25mm wide and 3mm thick, fixed by proper gas welding complete all as per the existing specifications, then S&F new seat and back made by using pressure-treated plywood and add padding of 50mm thick 40 density foam sheets including screwing, nailing, wedging gluing, new webbing tape, new PVC lipping duly covered with new water resistant tapestry cloth of approved color and texture of rate not less than 250 per meter. The fixing of cloth shall be done by using heavy duty staple gun tacker, powder coated screws. The seat and back all around shall also be covered with new water resistant tapestry cloth then covered with plastic transparent film with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6MAP/11). |
| 114 | M & L for repair to CHAIR VERANDAH (MS STRIP) by taking down/removing the existing broken /unserviceable rusted Rear Leg from the chair carefully and S & F new mild steel rear leg made of 16mm dia MS conduit pipe 18 Gauge thickened 400mm long fixed by proper gas welding with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6MAP/11). |
| 115 | M & L for repair to CHAIR VERANDAH (MS STRIP) by taking down/removing the existing broken /unserviceable rusted Front Leg from the chair carefully and S & F new mild steel Front leg made of 16mm dia MS conduit pipe 18 Gauge thickand 550mm long fixed by proper gas welding complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/E6MAP/11). |
| 116 | M & L for repair to CHAIR VERANDAH (MS STRIP) by Painting frame of the Chair verandah with two coats of Milk white colour synthetic enamel paint of approved 1st quality over a coat of red oxide primer after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth and make smooth by applying metal putty where required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge (Drg No. FD/E6MAP/11). |
| 117 | CHAIR CBA STEEL WITH HAND REST(DRG NO. FD-120) |
| 118 | MS Square pipe of 19 mm size, 16 G (1.6 mm thick)to be fix after cutting offRusted legs or seat/back rest frameswith hack-saw blade and welded dulypainted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 119 | Hand Padof teak wood of size 300 x 300x 20 mm made to shape as per drg,duly french polished and fixed with piano hinges as required with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 120 | Jointing of worn out MS Square pipe 19 mm size of leg or frame by Gas welding and applying red oxide primer at jointed area with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 121 | Replacement of Arms rest with S&F new Arms rest size 50x20x255 made out of black integral skin polyurethne reinforced with MS insert and shall be scratch and weather resistance of chair briefing static baised with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 122 | Dismantling, taking out carefully old existing seat & back of any description & replacement of the same with S&F new seat and back made out by using padding of 50mm thick 40 density foam sheets including screwing, nailing, wedging gluing, new webbing tape, new PVC lipping duly covered with new PU leather cloth of approved color and texture of rate not less than 250 per meter. The fixing of cloth shall be done by using heavy duty staple gun tacker, powder coated screws as well seat & back should be fixed through 02 Nos MS stiffener size 25mmx4mm (duly two coat of enamel paint of approved color over a coat of red oxide primer) & suitable Nut/Bolts Screws. The Seat and Back frames should be polished with one or more coat of French Polish before fixing of seat/back with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 123 | Plastic End Cap suitable for MS Pipe frame and PVC Shoe suitable for legs, duly removing worn out one with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 124 | CHAIR STEEL WITHOUT ARMS MODEL CHR 18 / CHR 14 (MAKE GODREJ) |
| 125 | Jointing of worn out MS Square pipe 20 mm size of leg or frame by Gas welding and applying red oxide primer at jointed area with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 126 | M&L for two coats of TA/Graphite Gray synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of all Steel frames of Chair Steel with Arms, then paint (Make of Paint: Asian/Berger/Nerolac) through a spray machine to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 127 | Remove u/s worn out cane from seat/back and S&F new seat and back made out by using padding of 50mm thick 40 density foam sheets including screwing, nailing, wedging gluing, new webbing tape, new PVC lipping duly covered with new PU leather cloth of approved color and texture of rate not less than 250 per meter. The fixing of cloth shall be done by using heavy duty staple gun tacker, powder coated screws as well seat & back should be fixed through 02 Nos MS stiffener size 25mmx4mm (duly two coat of enamel paint of approved color over a coat of red oxide primer) & suitable Nut/Bolts Screws with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 128 | Replacement of shoe/Cap with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws for bottom of MS Pipe frame and Plastic End Cap suitable for top of MS Pipe frame with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 129 | CHAIR STEEL WITH ARMS MODEL CHR 7 / CHR 6 (MAKE GODREJ) |
| 130 | Jointing of worn out MS Square pipe 20 mm size of leg or frame by Gas welding and applying red oxide primer at jointed area with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 131 | M&L for two coats of TA/Graphite Gray synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of all Steel frames of Chair Steel with Arms, then paint (Make of Paint: Asian/Berger/Nerolac) through a spray machine to obtain a high gloss finish similar to new furniture with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 132 | Replacement of Arms rest with S&F new Arms rest size 50x20x255 made out of black integral skin polyurethne reinforced with MS insert and shall be scratch and weather resistance of chair briefing static baised with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 133 | Remove u/s worn out cane from seat/back and S&F new seat and back made out by using padding of 50mm thick 40 density foam sheets including screwing, nailing, wedging gluing, new webbing tape, new PVC lipping duly covered with new PU leather cloth of approved color and texture of rate not less than 250 per meter. The fixing of cloth shall be done by using heavy duty staple gun tacker, powder coated screws as well seat & back should be fixed through 02 Nos MS stiffener size 25mmx4mm (duly two coat of enamel paint of approved color over a coat of red oxide primer) & suitable Nut/Bolts Screws with standard workmanship complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 134 | Replacement of shoe/Cap with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws for bottom of MS Pipe frame and Plastic End Cap suitable for top of MS Pipe frame with standard workmanship complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
