|
| 1 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises, complete all as specified and directed. |
| 2 | Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness, complete all as specified and directed. |
| 3 | M&L for 25mm thk PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in subbase of floors, complete all as specified and directed. |
| 4 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/ highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles, complete all as specified and directed. |
| 5 | M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6for laying floor finishes, complete all as specified and directed. Note : Work will be in patches or in bulk. |
| 6 | M & L forVirified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc., complete all as specified and directed. |
| 7 | M & L for digitally Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc., complete all as specified and directed. |
| 8 | M&L forVirified Ceramic tiles in skirting 10 mm thick (square/ rectangular) polished, area of each tiles match as the size of floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15mm th screed bed in CM (1:4) in floors etc., complete all as specified and directed. |
| 9 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed. |
| 10 | M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed. Note : Work will be in patches or in bulk. |
| 11 | M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick rendering in cement mortar (1:4) jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 12 | M & L20mm thick Granite (of any type) machine cut in, wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including screed bed 15 mm thick in CM (1:6), complete all as specified and directed. |
| 13 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed. |
| 14 | Material and Labour for Brick work with sub class \"B\" brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed. |
| 15 | M&L for Precast cement concrete(1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar (1:4), complete all as specified & directed by Engineer-in-Charge. |
| 16 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc, complete all as specified and directed. |
| 17 | M & L for 5 mm thick cement plaster in CM(1:3) on ceilingsurfaces and finish the surface fair and even without using extra cement, complete all as specified and directed. |
| 18 | M & L for rendring 15mm thick in cemet mortar 1:6 including mixing of liquid water proofing compound as per manufacturer\"s instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement, complete all as specified and directed.Note:- WPC will be measured and paid separately. |
| 19 | M & L for rendring 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer\"s instructions on brick work or concrete surfaces or in chajjas/ parapet walls etc finished even and smooth without using extra cement, complete all as specified and directed. |
| 20 | Supply only integral liquid water proofing compound, complete all as specified and directed. |
| 21 | M&L for preparation of new plastered or unplastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty of 1 mm thickness, complete all as specified and directed by Engr-in-charge. |
| 22 | M&L for preparation of new plastered or unplastered surface of wall incl washing/ rubbing down and stopping of old painted surfaces of ncluding cornices etc and making good of holes by filling holes in plastered surfaces with POP and applying one coat of plastic exterior emulsion paint, complete all as specified and as directed by Engr-in-Charge. |
| 23 | M&L for preparation of old plastered or unplastered surface of ceiling by brooming down or steel wire brushing, moss and efflorescent salts and trading oil and greasy spots.and applying one coat of Oil bound distemper on ceiling, complete all as specified and directed by Engr-in-charge. |
| 24 | M&L for prepartion of old painted wood or wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as directed by Engr-in Charge. |
| 25 | M&L preparing oldpainted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 26 | Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each, complete all as specified and as directed. |
| 27 | Taking down shutters of any description exc 2.00 sqm each, complete all as specified and as directed. |
| 28 | Supplying and fixing factory made 28-30mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required sizemodulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 29 | S&F 2nd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of timber flate on both sides, with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressed treated, complete all as specified and as directed. |
| 30 | S&F 2nd class hard wood 35mm thick Factory made glazed and skelton shutterand open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part I section 8 clause 8.24 (a) supplied and fixed to chowkats, complete all as specified and as directed. |
| 31 | S&F factory made 30 mm thick flushshutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed. |
| 32 | S&F Powder coated Aluminium anodised frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed. |
| 33 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge all as specified. |
| 34 | S&F 4.80mm thick sheet glass, ordinary quality and glazing in squaresexceeding 0.50 Sqm in each pane, complete all as specified & directed by Engineer-in-charge. |
| 35 | S&F 3mm thick sheet glass, ordinary quality and glazing in squaresexceeding 0.5 Sqm in each pane, complete all as specified & directed by Engineer-in-charge. |
| 36 | M & L for plain sheet glass plain 3mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane including hacking out of old/broken glass, complete all as specified and as directed. |
| 37 | S & F in repairs 10 to 12 mm thick Toughened glass as in door shutters, plateform, partition including necessary cutting to shape, drilling holes as reqd, jointing cleats, glazing clips, ruber neoprene packing, Stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws, complete all as specified and directed. |
| 38 | S&F Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete fixed, complete all as specified and directed. |
| 39 | S&F in repairs Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc, complete all as specified and directed. |
| 40 | M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applyingtwo coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface, complete all as specified and directed. |
| 41 | S&F butt hinges ISI marked 100mm size medium weight cold rolled ms in any type of chowkat or frame including welding if required, complete all as specified and directed. |
| 42 | S&F 150mm size extruded aluminium alloy handles ISI marked fabricated type, anodised, complete all as specified and directed. |
| 43 | S&F aluminum anodised barrel tower bolts of extruded section 150 mm long, bearing ISI mark, complete all as specified and directed. |
| 44 | S&F aluminium alloy, anodised, sliding door bolt plate with hasp and staple (bolt type), 250 mm size and fixing in clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed. |
| 45 | S&F in repair Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed. |
| 46 | S & F in repairs 150 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed. |
| 47 | S & F in repairs aluminum aodised sliding door bolts of 300mm long with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, bearing ISI mark, complete all as specified and directed. |
| 48 | S & F in repairs aluminum anodised handle fabricated type extruded section of 150mm long, bearing ISI mark, complete all as specified and directed. |
| 49 | S&F in repairs Stainless steel tubing of 25 mm dia chromium plated minimum 1mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc, complete all as specified and directed.Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 50 | S&F in repair 18 to19 mm thick HDHMR board, prelaminated one side with decorative choice lamination & other side high glossy acrylic sheet of 3mm thick, exterior grade, fixed with screws to frame work as in cup borad & kitchen cabinet shutters and all other similar works, complete all as specified and directed. Make:- Action tessa/Greenply/century ply as approved by GE. |
| 51 | S & F in repair 6mm thick of size 600x450mm looking mirror fixed to wall with stainless steel plugs/ connecter/ spacers/ screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position, complete all as specified and directed. |
| 52 | S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directedjoint run and leadfront or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 type B-0, complete all as specified and directed. |
| 53 | Supply & fixing in repair vitreous china wash down water closet of Pedestalpattern white including making connection to trapand to flushing pipe etc complete and making good to floor, complete all as specified and directed. |
| 54 | S & F in repair Vitreous china premium/1st quality wash down water closet floor mounting EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections short connections pipe of length upto 600 mmand Cutting holes in or through walls, packing with PCC 1 : 2 :4 type B-0, complete all as specified and directed. |
| 55 | S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 56 | S & F in repairs Flushing cistern of PVC 10 ltr capacity valveless syphonic action type, low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size, complete all as specified and directed. |
| 57 | S & F in repairs Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer\"s instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 58 | S & F in repairs Vitreous china premium/1st quality wash basin (counter top), white, size 550x400 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer\"s instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 59 | S & F in repairs Vitreous china premium/1st quality wash basinflat back white, size 630x450 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer\"s instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 60 | Supply and fixingin repair of fancy typepillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type, complete all as specified and directed. |
| 61 | S & F in repair Bib taps, CP, fancy type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed, complete all as specified and directed. |
| 62 | S&F in repairs 15mm bore stop valves, cast copper alloy, chromium plated fancy type with long shank cup (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 63 | S&F in repairs Angular Stop Cock, CP, fancy type with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position, complete all as specified and directed. |
| 64 | S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe, complete all as specified and directed. |
| 65 | S&F in repairs Brass CP wall Mixer 3 in 1 System with provision for overhead and hand shower suitable 15mm bore of pipe, complete all as specified and directed. |
| 66 | S & F in repairs brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 67 | Supply & fixing in repair Jet spray for water closet pan pedestal pattern including making connections and fixed in position, complete all as specified and directed. |
| 68 | S & F in repair brass chromium plated shower 15 mm bore single shower rose incl shower arm fancy type fixed to pipe, complete all as specified and directed by directed by Engr-in-charge. |
| 69 | S & F in repair Toilet paper holder with flat recessed type stainless steel, complete all as specified and directed. |
| 70 | Supply & Fixing 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections, complete all as specified and directed by Engr-in-charge. |
| 71 | Supply & Fixing 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections, complete all as specified and directed by Engr-in-charge. |
| 72 | S&F in repairs PVC connection 450mm long and 15 mm dia with brass fly nut at both ends, complete all as specified and directed. |
| 73 | Supply and fixingin repairs PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level, complete all as specified and directed. |
| 74 | Supply & Fixingin repairCorner glass shelf size 300 mm radius with and including bracket and glass complete set etc., complete all as specified and directed. |
| 75 | Supply & Fixingin repair Glass shelf size 600 mm long with and including bracket and glass complete set etc., complete all as specified and directed. |
| 76 | S&F in repairs Tubular towel rail brass chromium plated 20 mm diaD-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed. |
| 77 | Supply & Fixingin repair stainless steel Towel Rack with lower hanger size 24\"\" (600 mm) fixed to walls with hook etc., complete all as specified and directed. |
| 78 | S&F in repair PVC mirror cabinet of size 300x450mm of selected quality glass fixed in PVC cabinet, complete all as specified and directed. |
| 79 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc, complete all as specified and directed. |
| 80 | S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door, complete all as specified and directed. |
| 81 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 82 | S&F in repair 110 mm bore PVC (SWR) bends/shoes any radius, complete all as specified and directed. |
| 83 | Supply & fixedin repairs stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracketof overall size 915x460mm bowl size 410x330x160mm, complete all as specified and directed. |
| 84 | Supply & fixedin repairs stainless steel sink, made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 85 | S&F in repairs stainless steel plate rack of 600X750X250mm fixed to wall, complete all as specified and directed by Enginer in charge. |
| 86 | S & F for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank, complete all as specified and directed. |
| 87 | S & F for Rotational moulded polyethylene water storage tanks of 3000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank, complete all as specified and directed. |
| 88 | S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for any capacityPVC tank, complete all as specified and directed. |
| 89 | S & F in repairs 15mm Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe, complete all as specified and directed. |
| 90 | S & F in repairs 20mm Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe, complete all as specified and directed. |
| 91 | S & F in repairs 25mm Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe, complete all as specified and directed. |
| 92 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets, complete all as specified and directed. |
| 93 | M & L forGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed. |
| 94 | S & F for 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids, complete all as specified and directed.Note:- Frame work for ceiling shall be measured and paid separately.) |
| 95 | M&L for Anodised aluminium snap gridframe work for false ceiling, complete all as specified and directed.Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm.(ii) Rate quoted by the contractor shall deemed to inclusive of frame work complete. |
| 96 | M&L for providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturer instructions, complete all as specified and directed. |
| 97 | M& Lfor two coats of Oil bound distemper on ceiling surface including prepration of new surface, complete all as specified and directed. |
| 98 | Supply and fixing for PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed. |
| 99 | S&F in for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame, complete all as specified and directed. |
| 100 | Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc, complete all as specified and directed. |
| 101 | S&F Rolled mild steel for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, including two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed. |
| 102 | S&F in Rolled mild steel for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, including two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed. |
| 103 | Supplied and fixing of rolled mild steel for framed work such as grills, gratings, gate /designer gateetc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, windows, balcony in ground floor, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde -E-165, including two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed. |
| 104 | S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws including dismantling (AC corrugated, semi corrugated/ PPGI sheets in roof coverings, complete all as specified & directed by Engineer in charge. |
