|
| 1 | All the below item/Material provided/Supplies by contractor (Basic Rate with Frieght & Insurance Charges to be Quoted by bidder (in. Rs.)) |
| 2 | Material Description |
| 3 | ST POLE 11 METER LONG |
| 4 | 11 KV DISC INSULATOR WITH FITTING (T&C TYPE) |
| 5 | 11 KV DISC INSULATOR WITH FITTING (B&S TYPE) |
| 6 | 11 KV PIN INSULATOR WITH PIN |
| 7 | F/E BRACKET FOR FITTING TOP INSULATOR WUTH N&B |
| 8 | CROSS ARM MS ANGLE 65*65*6 MM V TYPE 11 KV |
| 9 | CROSS ARM HOLDING CLAMPS WITH N&B |
| 10 | PHASE WIRE ACSR DOG CONDUCTIOR |
| 11 | T OFF MS CHANNEL (125*65*1300) |
| 12 | HOLDING CLAMPS WUTH N&B |
| 13 | GAURDING CROSSS ARM MS ANGLE 65*65*6 MM |
| 14 | GI WIRE FOR GAURDING 6 SWG & 10 SWG |
| 15 | CLAMP FOR FIXING OF CROSSS ARM WITH N&B |
| 16 | STONE PAD (300*300*75 MM) |
| 17 | STAY COMPLETE (STAY ROD 16*1800 MM STAY WIRE 5 KG STAY CLAMP BOLT & NUT WITH GROUTING) |
| 18 | STAY COMPLETE (STAY ROD 20*1800 MM STAY WIRE 7/8 swg 10KG STAY CLAMP BOLT & NUT WITH GROUTING) |
| 19 | EARTHING OF POLE BY MS EARTHING ROD OF 20*2500 MM AND 6 SWG EARTHING WIRE |
| 20 | PAINTING OF POLE WITH PAINT (REDOXIDE- 2 LTR, AL PAINT -2 LTR) |
| 21 | NUT AND BOLT WITH WASHER ALL SIZE |
| 22 | DANGER BOARD WITH CLAMP & BOLTS |
| 23 | BARBED WIRE GI |
| 24 | NUMBER MARKING WITH YELLOW PAINT |
| 25 | MS ANGLE 65*65*6 MM , 4300 MM LONG BRACING WITH CLAMP |
| 26 | TOP CHANNEL MS (125X65X2240) MM |
| 27 | DROPPER MS CHANNEL (100*50*2028) |
| 28 | TOP CHANNEL (125X65X3200) MM (10.7 KG/M) |
| 29 | PG CLAMPS |
| 30 | NUMBER MARKING Board WITH YELLOW PAINT |
| 31 | EARTHNG (CHEMICAL/PIPE/PLATE ETC) COMPLETE FOR CABLE |
| 32 | CABLE AL XLPE 3C*185 SQMM 11 KV |
| 33 | CABLE JOINT KIT 3C*185 SQMM 11KV OUTDOOR TYPE |
| 34 | HDPE/DI/GI PIPE 6\" DIA FOR CABLE LAYING BY HDD |
| 35 | PIPE JOINTS FOR JOINING THE PIPE |
| 36 | HOLDING CLAMPS WITH N&B FOR GI PIPE |
| 37 | CABLE ROUTE & CABLE MARKER |
| 38 | NUMBER PLATES |
| 39 | T/F BASE MS ANGLE 75*75*6*2028 MM |
| 40 | 11 KV TPMO COMPLETE WITH CLAMPS AND CHANNELS |
| 41 | 11 KV FUSE SET WITH CLAMPS NAD CHANNELS |
| 42 | TANSFORMER 11/0.4 KV 100 KVA |
| 43 | ACSR WEASEAL CONDUCTOR |
| 44 | T OFF MS CHANNEL (125*65*1300) |
| 45 | LT INCOMING PANNEL WITH PROTECTION & METERING ARRANGEMENT (500 AMP MCCB/FUSE PROTECTION 3 CIRCUIT PROVISION |
| 46 | CABLE AL PVC 3.5C*150 SQMM LT |
| 47 | AL LUG 150 SQMM |
| 48 | AL LUG 70 SQMM |
| 49 | GI WIRE FOR GAURDING 6 SWG & 10 SWG |
| 50 | Meter PILLAR BOX FOR Meter INSTALLATION For 12 No Connection |
| 51 | MS & CIVIL STRUCUTRE FOR FEEDER PILLER BOX INSTALLATION |
| 52 | CABLE AL PVC 3.5x70 SQMM LT (DOUBLE CKT PROVISON) |
| 53 | PG CLAMPS or I Type Thimbles for Jointing Cable Of Size 70sqmm |
| 54 | HDPE Pipe 90mm |
| 55 | Errection of the below items by Contractor (All Local items/material shall be provided by contrctor) |
| 56 | ST POLE 11 METER LONG |
| 57 | 11 KV DISC INSULATOR WITH FITTING (T&C TYPE) |
| 58 | 11 KV DISC INSULATOR WITH FITTING (B&S TYPE) |
| 59 | 11 KV PIN INSULATOR WITH PIN |
| 60 | F/E BRACKET FOR FITTING TOP INSULATOR WUTH N&B |
| 61 | CROSS ARM MS ANGLE 65*65*6 MM V TYPE 11 KV |
| 62 | CROSS ARM HOLDING CLAMPS WITH N&B |
| 63 | PHASE WIRE ACSR DOG CONDUCTIOR |
| 64 | T OFF MS CHANNEL (125*65*1300) |
| 65 | HOLDING CLAMPS WUTH N&B |
| 66 | GAURDING CROSSS ARM MS ANGLE 65*65*6 MM |
| 67 | GI WIRE FOR GAURDING 6 SWG & 10 SWG |
| 68 | CLAMP FOR FIXING OF CROSSS ARM WITH N&B |
| 69 | STONE PAD (300*300*75 MM) |
| 70 | STAY COMPLETE (STAY ROD 16*1800 MM STAY WIRE 5 KG STAY CLAMP BOLT & NUT WITH GROUTING) |
| 71 | STAY COMPLETE (STAY ROD 20*1800 MM STAY WIRE 7/8 swg 10KG STAY CLAMP BOLT & NUT WITH GROUTING) |
| 72 | EARTHING OF POLE BY MS EARTHING ROD OF 20*2500 MM AND 6 SWG EARTHING WIRE |
| 73 | PAINTING OF POLE WITH PAINT (REDOXIDE- 2 LTR, AL PAINT -2 LTR) |
| 74 | NUT AND BOLT WITH WASHER ALL SIZE |
| 75 | DANGER BOARD WITH CLAMP & BOLTS |
| 76 | BARBED WIRE GI |
| 77 | NUMBER MARKING WITH YELLOW PAINT |
| 78 | MS ANGLE 65*65*6 MM , 4300 MM LONG BRACING WITH CLAMP |
| 79 | TOP CHANNEL MS (125X65X2240) MM |
| 80 | DROPPER MS CHANNEL (100*50*2028) |
| 81 | TOP CHANNEL (125X65X3200) MM (10.7 KG/M) |
| 82 | PG CLAMPS |
| 83 | NUMBER MARKING Board WITH YELLOW PAINT |
| 84 | EARTHNG (CHEMICAL/PIPE/PLATE ETC) COMPLETE FOR CABLE |
| 85 | CABLE AL XLPE 3C*185 SQMM 11 KV |
| 86 | CABLE JOINT KIT 3C*185 SQMM 11KV OUTDOOR TYPE |
| 87 | HDPE/DI/GI PIPE 6\" DIA FOR CABLE LAYING BY HDD |
| 88 | PIPE JOINTS FOR JOINING THE PIPE |
| 89 | HOLDING CLAMPS WITH N&B FOR GI PIPE |
| 90 | CABLE ROUTE & CABLE MARKER |
| 91 | NUMBER PLATES |
| 92 | T/F BASE MS ANGLE 75*75*6*2028 MM |
| 93 | 11 KV TPMO COMPLETE WITH CLAMPS AND CHANNELS |
| 94 | 11 KV FUSE SET WITH CLAMPS NAD CHANNELS |
| 95 | TANSFORMER 11/0.4 KV 100 KVA |
| 96 | ACSR WEASEAL CONDUCTOR |
| 97 | T OFF MS CHANNEL (125*65*1300) |
| 98 | LT INCOMING PANNEL WITH PROTECTION & METERING ARRANGEMENT (500 AMP MCCB/FUSE PROTECTION 3 CIRCUIT PROVISION |
| 99 | CABLE AL PVC 3.5C*150 SQMM LT |
| 100 | AL LUG 150 SQMM |
| 101 | AL LUG 70 SQMM |
| 102 | GI WIRE FOR GAURDING 6 SWG & 10 SWG |
| 103 | Meter PILLAR BOX FOR Meter INSTALLATION For 12 No Connection |
| 104 | MS & CIVIL STRUCUTRE FOR FEEDER PILLER BOX INSTALLATION |
| 105 | CABLE AL PVC 3.5x70 SQMM LT (DOUBLE CKT PROVISON) |
| 106 | PG CLAMPS or I Type Thimbles for Jointing Cable Of Size 70sqmm |
| 107 | HDPE Pipe 90mm |
| 108 | CONCERTING OF POLE (0.268 CU.M/POLE) |
| 109 | Concreting of Stay |
| 110 | Digging of Pit Suitable for Erection of 11m STP /Stay with the help of wring machine |
| 111 | DIGIING OF HORIZANTAL BORING UNDER THE RAILWAY TRACK FOR FIXING OF HSPE.GI/DI PIPE 6\" FOR LAYING OF CABLE WITH IN PIPE |
| 112 | DIGIING OF CABLE TRENCH EXCEPT UNDER THE RAILWAY TRACK FOR LAYING GI PIPE AND CABLE WITH FIRST CLASS BRICKS PROTECTION AND FILLING THE RIVER SAND INCLUDING BACK FILLING BY SAND COMPLETE |
| 113 | Cable Laying Charge |
| 114 | Laying of HDPE Pipe with HDD Method |
| 115 | Cable Laying Charge for LT |
| 116 | Laying of HDPE Pipe |
| 117 | Digging of Trench in Hard Rocky Surface Please Enable Macros to View BoQ information |
