|
| 1 | Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound, on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement,Incl preparation new decorated surfaces of wallsfor applying Two coats of weather coat paint over a coat of base/primer complete all as specified and directed.Note : WPC measured and paid separately. |
| 5 | Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even,Incl preparation new decorated surfaces of wallsfor applying Two coats of weather coat paint over one coat of base/primer coat complete all as specified and directed |
| 6 | M&L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces Incl preparation new decorated surfaces of wallsfor applying Two coats of weather coat paint over a coat of base/primer complete all as specified and directed. |
| 7 | M&L RCC, type B-1 (1:2:4) using 20mm graded aggregate in, slab supported on wall, walls beams and columns in floors, roof landings complete all as specified and directed. |
| 8 | Use of waste form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed. |
| 9 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 10 | S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 11 | Dismantling of existing unserviceable RCC/PVC water tankand S&F 1000 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed. |
| 12 | S&F 20mmball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed |
| 13 | Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories) |
| 14 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / newMS stack clamps ofFI 50 x 3mm complete all as specified and directed. |
| 15 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 16 | S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 17 | Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site complete all as specified and directed. |
| 18 | Material and labour for 40mm thick (avergae consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of \"V\" shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed. |
| 19 | M&L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3%by weight of cement on fair faces of RCC/stone patti roof surfaces finished even & smooth without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately. |
| 20 | M&L roof treatment with APP modified polymeric water proofing membrane, 3mm thick having centre core not less than 100 mircron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 3.0 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps complete all as specified and directed |
| 21 | M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed. |
| 22 | S&F mild steel framed work such as grills, grating cooler stands, etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 23 | M&L for preparation of newsteel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed. |
| 24 | Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed. |
| 25 | M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending for hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips conforming to all complete all as specified and directed |
| 26 | M & L for Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan for any type of soil and rock complete all as specified and directed. |
| 27 | M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified and directed |
| 28 | M & L for Removing excavated soil exc. 250m but n exc 500m depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 29 | M & L for Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed. |
| 30 | M & L for walling of random rubble uncoursed stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. |
| 31 | M & L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 32 | M & L for coarse sand (Size 1.20mm) filling in floor or paving laid in layers n. exc. 15cm thick spread leveiled and rammed complete all as specified and directed. |
| 33 | M & L for gravels (Size 5-10mm) filling in floor or paving laid in layers n. exc. 15cm thick spread leveiled and rammed complete all as specified and directed. |
| 34 | M & L for gravels for granolithic floors graded from 12.5mm to 3.60 mm filling in floor or paving laid in layers n. exc. 15cm thick spread levelled and rammed complete all as specified and directed. |
| 35 | S & F of PVC pipes (Class 3 (6.0 Kg/cm2), 150 mm bore, single sockets, in any length with rubber ring joints with solvent for permanent in joint laid in floors or wall with Clips for wall complete all as specified and directed. |
| 36 | M & L for cement concrete bed to PVC pipes including packing under and haunching againstthe sides of pipe after they are laid & tested for 150 mm PVC bore of pipe withcement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 37 | S & F of PVC pipes (Class 3 (6.0 Kg/cm2), Slotted pipe 150 mm bore, single sockets, in any length with rubber ring jointswith solvent for permanent in jointlaid in floons or wall complete all as specified and directed. |
| 38 | S & F of Drilling bore hole of 300 mm dia with drill bore machine of suitable capacity penetrating any tye of soil/ rock and inserting suitable length along the alinghment & connecting with PVC Slotted pipe 150mm dia upto at end point & laying (incl required item casing and caping for required length for soil not fall in boring area after bore) complete all as specified and directed.Note :- PVC Pipe will be measured and paid seperately. |
| 39 | S & F of MS Jali for Filtration of water and allow to move along the bore complete all as specified and directed. |
| 40 | S & F of one side valve150 mm dia for PVC pipe fixed at the end of Bore complete all as specified and directed. |
| 41 | M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 42 | M & L for PCC 1:3:6 Type C2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 43 | M & L for MS work for fencing post/gates and struts made from angle iron and flat iron in any section including cutting tops to shape, drilling holes and notching for fixing of wires etc confirming to Fe-290 or Fee-330, complete all as specified and directed. |
| 44 | Supply only chain link MS zink coating 60 gms as per IS 4826 fencing of any mesh size and 3mm dia or wire complete all as specified. Note : This items shall be measured and paid as per actual weight or standard weight as per SSR which ever is less complete all as specified and directed. |
| 45 | Fixing only chain link fencing including line wire, any mesh size and any type of standards rails straining bolt etc including provision of binding wire complete all as specified and directed. |
| 46 | S & F of 4mm dia galvanised medium coated steel wire cut to length as required for fixing chain the fencing etc complete all as specified and directed. |
| 47 | M & L for5 to 10mm dia and length exc 5cm and n.exc 10cm mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed endto be fitted with washers etc complete all as specified and directed. |
| 48 | M & L for preparation of new steel & iron surface of width or girth exc 10cm & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide zinc chrome complete all as specified and directed. |
| 49 | Total in Figures |
| 50 | Quoted Amount in Words |
