|
| 1 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in any type of soil getting out and levelling of bottom surface to required level for poles/ stay assembly/ cable complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25m thick complete all as specified and as directed. |
| 3 | Removing excavated material from site to a distance not exceeding 50 mtr away and depositing where directed not exceeding 1.5 mtr from the starting point complete all as specified and as directed. |
| 4 | Road cutting, PCC hard standing as per site requirement including excavation for laying of GI pipe and making good the disturbed surfaces all as per existing surface complete all as specified and as directed. |
| 5 | Brick work with sub class \"B\" bricks straight or curved on plan not exceeding 6m mean radius built in CM (1:4) for sluice valve pit complete all as specified and as directed. |
| 6 | Rendering 10mm thick on fair faces of brick work or concrete surfaces inside sluice valve pit in CM (1:6) complete all as specified and as directed. |
| 7 | Surface excavation not exceeding 30 cm deep and averaging 50 cm deep and getting out in soft/ loose soil including taking out vegetation from entire area of water supply installation complete all as specified and as directed. |
| 8 | Cement concrete in foundation subways (1:4:8) type D-2 aggregate including demolishing existing complete all as specified and as directed. |
| 9 | PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) for subways 40mm thick including demolishing existing complete all as specified and as directed. |
| 10 | Supply and fixing in replacement of CI sluice valve PN 1.6 with iron wheel head of size 150mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3mm thick conforming to ISI-14846/2000 complete all as specified and as directed. |
| 11 | Supply and fixing in replacement of CI sluice valve PN 1.6 with iron wheel head of size 100mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3mm thick conforming to ISI-14846/2000 complete all as specified and as directed. |
| 12 | Supply and fixing in replacement of CI sluice valve PN 1.6 with iron wheel head of size 80mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3mm thick conforming to ISI-14846/2000 complete all as specified and as directed. |
| 13 | Supply and fixing in replacement of CI non return valve PN 1.6 of size 150mm bore with stainless steel working part conforming to ISI-5312/2004 duly IS marked complete with rubber gaskit 3mm thick and nut, bolts and washer couple complete all as specified and as directed. |
| 14 | GI tubing \"medium grade\" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 100 mm dia in replacement complete all as specified and as directed. |
| 15 | GI tubing \"medium grade\" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 80 mm dia in replacement complete all as specified and as directed. |
| 16 | GI tubing \"medium grade\" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 50 mm dia in replacement complete all as specified and as directed. |
| 17 | GI tubing \"medium grade\" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 40 mm dia in replacement complete all as specified and as directed. |
| 18 | GI tubing \"medium grade\" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 25 mm dia in replacement complete all as specified and as directed. |
| 19 | GI tubing \"medium grade\" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 20 mm dia in replacement complete all as specified and as directed. |
| 20 | S&F in replacement of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 50mm bore complete all as specified and as directed. |
| 21 | S&F in replacement of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 40mm bore complete all as specified and as directed. |
| 22 | S&F in replacement of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm bore complete all as specified and as directed. |
| 23 | S&F in replacement of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm bore complete all as specified and as directed. |
| 24 | S&F in replacement of cast iron pipe with spigot and socket ends centrifugally cast class \"B\" of any length conforming to ISI laid in trenches of size 150mm bore complete all as specified and as directed. |
| 25 | S&F in replacement of cast iron pipe with spigot and socket ends centrifugally cast class \"B\" of any length conforming to ISI laid in trenches of size 100mm bore complete all as specified and as directed. |
| 26 | Material and labour in replacement of CI fitting any type, radius and angle for spigot and socketed and flanged pipes, laid piece both end flanged or one end flanged other socketed, cap, plug, dead end flanged, split collar, reducer of any size upto 150 mm bore pipe complete all as specified and as directed. |
| 27 | Material and labour in replacement of CI split coller of size 150mm dia complete with rubber gaskit 3 mm thick and nut, bolts, washer etc complete all as specified and as directed. |
| 28 | Material and labour in replacement of sluice valve spindle stainless steel suitable for 150 mm sluice valve complete with check nut complete all as specified and as directed. |
| 29 | Labour for repair/ rectification of leakage of underground water pipe line GI of size 25 to 100 mm dia with excavation Appx 1.0 X 1.0 X 1.0 mtr around the leakage, returning, filling in, removal, cutting/ disconnecting to existing leakage GI pipe line in position for repair/ rectification of leakage, repairs of unserviceable fittings and welding work as per site requirement and restore the water supply complete all as specified and as directed.Note: - Spare/ fitting shall be measured and paid separately. |
| 30 | Supply and fixing GI union 100 mm dia complete all as specified and as directed. |
| 31 | Supply and fixing GI union 50 mm dia complete all as specified and as directed. |
| 32 | Supply and fixing GI union 40 mm dia complete all as specified and as directed. |
| 33 | Supply and fixing GI union 25 mm dia complete all as specified and as directed. |
| 34 | Supply and fixing GI union 20 mm dia complete all as specified and as directed. |
| 35 | Supply and fixing GI socket 100 mm dia complete all as specified and as directed. |
| 36 | Supply and fixing GI socket 50 mm dia complete all as specified and as directed. |
| 37 | Supply and fixing GI socket 40 mm dia complete all as specified and as directed. |
| 38 | Supply and fixing GI socket 25 mm dia complete all as specified and as directed. |
| 39 | Supply and fixing GI socket 20 mm dia complete all as specified and as directed. |
| 40 | Supply and fixing GI Elbow 50 mm dia complete all as specified and as directed. |
| 41 | Supply and fixing GI Elbow 40 mm dia complete all as specified and as directed. |
| 42 | Supply and fixing GI Elbow 25 mm dia complete all as specified and as directed. |
| 43 | Supply and fixing GI Elbow 20 mm dia complete all as specified and as directed. |
| 44 | Supply and fixing GI Tee 50 mm dia complete all as specified and as directed. |
| 45 | Supply and fixing GI Tee 40 mm dia complete all as specified and as directed. |
| 46 | Supply and fixing GI Tee 25 mm dia complete all as specified and as directed. |
| 47 | Supply and fixing GI Tee 20 mm dia complete all as specified and as directed. |
| 48 | Supply and fixing GI Nipple 50mm dia 150 mm long complete all as specified and as directed. |
| 49 | Supply and fixing GI Nipple 40mm dia 150 mmlong complete all as specified and as directed. |
| 50 | Supply and fixing GI Nipple 25mm dia 100 mmlong complete all as specified and as directed. |
| 51 | Supply and fixing GI Nipple 20mm dia 100 mmlong complete all as specified and as directed. |
| 52 | Supply and fixing GI reducer 25/20mm dia complete all as specified and as directed. |
| 53 | Supply and fixing GI reducer 20/15mm dia complete all as specified and as directed. |
| 54 | Labour for repair/ rectification of leakage of underground CI/ DI pipe line of size 80 to 150 mm bore dia in position complete with excavation Appx 1.5 X 1.5 X 1.5 mtr around the leakage, returning filling in, removal, cutting/ dismantling of leakage complete with and including cocking to existing lead joint, filling new lead joint burning and taking out existing lead joint as per site requirement and restore the water supply complete all as specified and as directed.Note: - Spare/ fitting shall be measured and paid separately. |
| 55 | Material and labour filling CI spigot and socketed joint of any size Lead pig complete all as specified and as directed. |
| 56 | Material and labour filling CI spigot and socketed joint of any size Lead wool complete all as specified and as directed. |
| 57 | Material and labourfor filling CI spigot and socketed joint of any size Spun Yarn complete all as specified and as directed. |
| 58 | Material and labour for Altoch GP packing of 45 Kg in drum complete all as specified and as directed. |
| 59 | Supply and fixing in replacement of unserviceable bolt 16 mm dia X 150mm long fully threaded with counted head nuts and washer heavy duty conforming to ISI for MS column pipe/ CI flanged pipe complete all as specified and as directed. |
| 60 | Repair/ Maint/ service to swimming pool filteration plant complete with cleaning of underground sump by removing dirt and mud, repairs of unserviceable spare parts fitting valves, filter media, PVC strainer, pressure gauge, butterfly valve, air vent pipe complete with cleaning internally including taking out all filter media outside and kept separately each media at site for reuse, preparing external services of filter media and make the surface smooth and applying two coats of synthetic enamel paint and a coat of red oxide primer complete with suction and discharge pipe and relaying all filter media in proper layer duly washed and tested on full load complete all as specified and as directed.Note: - Spare shall be measured and paid separately. |
| 61 | Supply and fixing in replacement water pressure gauge 10 Kg 100 mm dia complete with 3/8 inch brass sampling cock complete all as specified and as directed. |
| 62 | Supply and fixing in replacement butterfly valve cast iron body with gun metal sheet conforming to IS-13095 of size 150 mm dia complete all as specified and as directed. |
| 63 | Material and labour in replacement of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm bore complete all as specified and as directed. |
| 64 | Supply and fixing double deck type PP strainer of size 3/8 inch or ½ inch complete all as specified and as directed. |
| 65 | Supply and fixing in replacement suction sweeper complete assembly along with pump motor for swimming pool (pool cleaner) 36 inch long complete with wheels, PVC core nylon brush 36 inch NRV complete all as specified and as directed. |
| 66 | Supply and fixing in replacement suction flexible rubber hose pipe 80 mm dia braded type green colour conforming to ISI complete with suitable size MS clamp complete all as specified and as directed. |
| 67 | Repair/ Maint/ service to swimming pool dewatering centrifugal pump set single stage 5 -- 7.5 HP complete with repairs of CI impeller, neck ring, bearing, hosing, sleeve and remetalling to pump shaft, welding, brazing and polishing etc and make the pump serviceable complete all as specified and as directed.Note: - Spare shall be measured and paid separately. |
| 68 | Supply and fixing CI Impeller complete all as specified and as directed. |
| 69 | Supply and fixing ball bearing complete all as specified and as directed. |
| 70 | Supply and fixing stainless steel sleeve complete all as specified and as directed. |
| 71 | Supply and fixing stainless steel neck ring complete all as specified and as directed. |
| 72 | Supply and fixing pump shaft coupling with key tyre type complete all as specified and as directed. |
| 73 | Supply and fixing superior quality copper sulphate complete all as specified and as directed. |
| 74 | Supply and fixing PVC insulation patch roll for submersible cable connection complete all as specified and as directed. |
| 75 | Supply and fixing in replacement of fully automatic star delta starter 3 phase, 415 Volt, 50 Hz, suitable for submersible pumping set heavy duty with overload relay range 37 - 50 Amp complete all as specified and as directed. |
| 76 | Material and labour for cleaning to overhead RCC reservoir of any capacity internally at appx 40 feet high stagging by using water treatment chemical/ bleaching powder/ Sodium hypochloride chemical including cleaning internally entire wall surface, removing deposited particular, scrubbing complete wall surface and applying coat treatment water chemical on complete wall and drain out the water after disconnecting all rising/ distribution sluice valves complete all as specified and as directed. |
| 77 | Material and labour for cleaning to underground sump of any capacity internally at any height/ stagging by using water treatment chemical/ bleaching powder/ Sodium hypochloride chemical including cleaning internally entire wall surface, removing deposited particular, scrubbing complete wall surface and applying coat treatment water chemical on complete wall and drain out the water after disconnecting all rising/ distribution sluice valves complete all as specified and as directed.Note: - Rate of labour to empty tank deemed to be included in quoted rates. |
| 78 | Material and labour for providing two coats of synthetic enamelled base paint on external surface of MS sheet/ rails/ rising main/ distribution pipe/ wash out MS/ CI pipe with suitable colour coding to overhead RCC reservoir at stagging appx 22 mtr complete all as specified and as directed. |
| 79 | Material and labour for painting and writing letters \"SAVE WATER\" in Block letter size 36\" x 18\"\" on dome of overhead water RCC tank and underground sump, writing of tank capacity and date of cleaning and due date of cleaning in capital letters of 80mm size on external surface of wall with white enamel paint over black background of any capacity overhead tank and underground sump complete all as specified and as directed by Engineer-in-Charge. |
| 80 | Material and labour for rectification of leakage in distribution CI pipe line 80/100/150mm bore dia of RCC overhead reservoir Appx at 40\" to 60\" height outside the reservoir near doom complete with repairs/ cocking of lead, spun yarn, rubber gaskets, nut, bolts, washers of suitable size and made the pipe line leakage free complete all as specified and as directed.Notes: - (i) Rates are deemed to be included charges of hiring T&P, Veh, Ladders, steel shuttering or any equipment required at site.(ii) Contractor shall be fully responsible for life insurance of the person deployed at site and get the repair under his supervision visitor from the qualified technician. |
| 81 | Dismantling and taking down electric motor of dozing system and shifting in workshop for repair and rewinding with super enamelled copper winding wire of same gauge and no\"s of turns complete with insulated material i.e. varnish, cotton tape, bamboo strips, emory paper and drying including repairs of unserviceable spare parts complete all as specified and as directed.Note: - Spare parts shall be measured and paid separately under respective items. |
| 82 | Supply and fixing motor seal complete all as specified and as directed. |
| 83 | Supply and fixing motor bearing complete all as specified and as directed. |
| 84 | Supply and fixing motor fan blade complete all as specified and as directed. |
| 85 | Supply and fixing rotor shaft complete all as specified and as directed. |
| 86 | Supply and fixing coupling complete all as specified and as directed. |
| 87 | Dismantling and taking down dozing pumping set and shifting in workshop for repair/ maintenance/ overhauling and reassembly after necessary repair refixing same place complete with and including repairs of unserviceable/ defective spare parts and testing on load at site complete all as specified and as directed.Note: - Spare parts shall be measured and paid separately under respective items. |
| 88 | Supply and fixing Agitator assembly complete all as specified and as directed. |
| 89 | Supply and fixing Agitator bearing complete all as specified and as directed. |
| 90 | Supply and fixing Agitator shaft with stainless steel blade duly FRP coated complete all as specified and as directed. |
| 91 | Supply and fixing foot valve complete all as specified and as directed. |
| 92 | Supply and fixing suction valve complete all as specified and as directed. |
| 93 | Supply and fixing discharge valve complete all as specified and as directed. |
| 94 | Supply and fixing injection fitting complete all as specified and as directed. |
| 95 | Supply and fixing PE tubing 5/8\" (8 mtr) complete all as specified and as directed. |
| 96 | Supply and fixing solenoid motor complete all as specified and as directed. |
| 97 | Supply and fixing main head (PP/ PVC) complete all as specified and as directed. |
| 98 | Supply and fixing main head hexagonal bolts complete all as specified and as directed. |
| 99 | Supply and fixing diaphragm (taflon faced) complete all as specified and as directed. |
| 100 | Supply and fixing Acrylic front cover complete all as specified and as directed. |
| 101 | Supply and fixing speed/ stroke nob complete all as specified and as directed. |
| 102 | Supply and fixing toggle switch complete all as specified and as directed. |
| 103 | Supply and fixing strainer for foot valve complete all as specified and as directed. |
| 104 | Supply and fixing electronic controlled circuit plate complete all as specified and as directed. |
| 105 | Supply and fixing NRV spring complete all as specified and as directed. |
| 106 | Supply and fixing Air release valve complete all as specified and as directed. |
| 107 | Supply and fixing power chord with plug complete all as specified and as directed. |
| 108 | Supply and fixing injection check valve (NRV) complete all as specified and as directed. |
| 109 | Supply and fixing FRP Solution preparation cum settling tank 170 litres capacity with lid, Port Hole, inlet/ outlet drain connection, level gauge, sludge deposition facility etc and fitted with speed reducing motor and stainless steel - 316 agitator combined with dosing tank capacity 100 litres with lid, Port hole, inlet/ outlet/ drain connection, level gauge but without speed reducing motor and stainless steel - 316 agitator etc complete all as specified and as directed.Make-: RMCO or equavalant as approved by GE. |
| 110 | Supply and fixing in replacement of chlorine test kit with coloured sample complete with all testing filaments and OT solution in rexin finish wooden box complete all as specified and as directed. |
| 111 | Supply and fixing in replacement of water pressure gauge 7 Kg/ 10 Kg heavy duty 100 mm dia complete with brass sampling cock 3/8\" and pressure gauge cock complete all as specified and as directed. |
| 112 | Supply and fixing in replacement of OT solution chlorine test (500 ml) complete all as specified and as directed. |
| 113 | Material and labour for chlorine gas cylinder 100 Kg capacity for cleaning and disinfection of swimming pool water containing algaecide and coagulant with arrangement for controlled release of active ingrediants in water and head suspensor complete all as specified and as directed. |
| 114 | Material and labour for pool cleaner solution liquid type for cleaning swimming pool and bring it to clear state each bottle 3.8 litres complete all as specified and as directed. |
| 115 | Supply, installation, testing and commissioning in repair of existing LT Panel and DOL Starter panel CPRI approved, factory made, floor mounted double door, 3 phase 4 wire, 50 cycles, 415 Volts with replacement of burnt and non functional contactor, suitable relays, DOL starter suitable for 15-25 HP submersible motor with all connected items of existing make and size, complete internal wiring and making panel functional with satisfactory level of Engineer-in-Charge complete all as specified and as directed.Note: - All items i.e. spare parts, contactor, suitable relays, DOL starter, internal wiring, labour charges and making all disturbed surface good shall be deemed to be included in the quoted rate and nothing extra from the Department shall be admissible on this account. |
| 116 | Cleaning the entire area within the fencing/ boundary wall of tubewell installations which includes cutting of bushes/ shrubs/ unwanted grass in the peripherry/ surrounding of complete installation i.e. O/H reservoir, Gen rooms, Clear water sumps, removing unwanted grass at the complete installation including sweeping of whole area and disposal of all the removed material as directed after cutting/ cleaning. The plinths around the complete buildings at installation is to be maintained free from any type of grass and cleaning complete all as specified and as directed by Engineer-in-Charge.Note:- Rate quoted will be composite cleaning of area throughout the periodicity as and when required by deploying regular source of cleaning i.e. manpower and all types of T&P. |
| 117 | Material and labour Crystal type white Amonia Alum Grade - 1 quality suitable for water treatment plant complete all as specified and as directed. |
| 118 | Supply and fixing in replacement of submersible cable 16 Sqmm 3 core flat copper conductor heavy duty 1100 Volts grade conforming to ISI complete all as specified and as directed by Engineer-in-Charge. |
| 119 | Supply and fixing in replacement of RM series is a reciprocating mechanically actuated diaphragm dosing pumps suitable for dosing quantities of liquid products upto 1100 lph complete all as specified and as directed.Make-: RMCO Model No. RMPV 13 or equivalent as approved by GE. |
