Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling and taking out carefullyold Unserviceable / Worn – Out and broken components of Wooden and Steel Furniture without damaging the remaining serviceable members, furniture and Supplying and Fixing of the same with new components such as Prelaminated MDF Board, Exterior Grade, One side decorative lamination and other side balancing white conforming to IS – 14857, Plywood BWR Grade conforming to IS – 303, Mild Steel Sections, Iron mongery fittings, Builders Hardware, Tapestry Cloth, Foam, Plastic Cane, Cotton / Nylon Newar etc. and Wood Work made of First Class Hard Wood [Teak Wood], seasoned, free from knots and cracks, wrought finished including tightening the joints, pinning, screwing, nailing, wedging, gluing, providing hinges, polishing / painting the entire article with standard workmanship complete to its original shape and size all as shown on drawings, as specified and as directed for following articles:Note: All furniture items shall be painted / polished only after completing all repairs and renewals etc. The furniture shall be repaired / renewed, Painted / Polished on site at Officers Married Accommodation after completion of B / R and E / M Welcome Maintenance works. All materials to be incorporated in the work shall conform to the latest IS Specification. Anti-termite and anti-bug treatment shall be done before polishing the wooden furniture and rate quoted is deemed to be including the same. |
| 2 | STOOL STEEL (305x305x510mm) : FD-81 |
| 3 | M & L for repair to STOOL STEEL (305X305X510MM)by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg 510mm height made of 1mm thick MS sheet made to shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-81) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 4 | M & L for repair to STOOL STEEL (305X305X510MM)by taking down/removing the existing broken /unserviceable Top carefully by cutting the welded ends with hand held machine and supply and fixing new Top made of 1.25mm thick MS sheet made to shape and of size 305x315mm as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-81) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 5 | STEP STOOL 2 TIER : FD-131 (M) |
| 6 | M & L for repair to STEP STOOL 2 TIER by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made out of 25mm dia MS tube, 20 Gauge thick made to shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-131(M)) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 7 | S & F in replacement of Castor wheel 50mm dia with ball bearing duly fixed with rubber over the same as per the exisiting and fixed to exact place and position in various furniture articles complete all as specified, shown on drawing and as directed. |
| 8 | M & L for repair to STEP STOOL 2 TIER by taking down/removing the existing broken /unserviceable Top carefully by cutting the welded ends with hand held machine and supply and fixing new Top made of 1.25mm thick MS sheet made to shape and of size 230x230mm as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-131(M)) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 9 | STOOL WITH CUSHION TOP : FD-103(M) |
| 10 | M & L for repair to STOOL WITH CUSHION TOP by taking down/removing the existing broken /unserviceable Clip carefully by cutting the welded ends with hand held machine and supply and fixing new clip made of 1.6mm thick MS sheet made to L-shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-103(M)) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 11 | M & L for repair to STOOL WITH CUSHION TOP by taking down/removing the existing broken /unserviceable Padded Seat of 380 mm dia carefully and supply and fixing new Padded seat with rexine cover in olive green colour as per the exisiting size and shape complete all as specified, shown on drawing and as directed. (Drg No. FD-103(M)) |
| 12 | RACK TOWEL STEEL : FD-81 |
| 13 | M & L for repair to RACK TOWEL STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of 175mm height, 25mm dia MS tube of 1.6mm thick made toshape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-81) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 14 | SCREEN MOVEABLE STEEL : FD-83 |
| 15 | M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of 300mm height, 25mm dia MS tube of 1.6mm thick made toshape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-83) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 16 | M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable hinge carefully by cutting the welded ends with hand held machine and supply and fixing new stainless steel Hinge, 100mm size fixed to the exact place and position complete all as specified, shown on drawing and as directed. (Drg No. FD-83) |
| 17 | M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Hook and Spring carefully and supply and fixing new Hook and Spring, PVC coated, 1150mm long all as per the exisiting specification and fixed complete all as specified, shown on drawing and as directed. (Drg No. FD-83) |
| 18 | M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Hook and Spring carefully and supply and fixing new Hook and Spring, PVC coated, 550mm long all as per the exisiting specification and fixed complete all as specified, shown on drawing and as directed. (Drg No. FD-83) |
| 19 | M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Cotton fabric curtain carefully and supply and fixing new Cotton fabric curtain of size 1160x1200mm duly stitch of green colour of Rate not less than Rs. 200.00 per metre all as per the exisiting specification and fixed complete all as specified, shown on drawing and as directed. (Drg No. FD-83) |
| 20 | M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Cotton fabric curtain carefully and supply and fixing new Cotton fabric curtain of size 550x1200mm duly stitch of green colour of Rate not less than Rs. 200.00 per metre all as per the exisiting specification and fixed complete all as specified, shown on drawing and as directed. (Drg No. FD-83) |
| 21 | TABLE BEDSIDE (TP) : TP-GODREJ |
| 22 | S&F in repair top drawer SS channel 12\" long complete all as specified and directed |
| 23 | S&FSS Knob of 25 mm dia and removal of old PVC knob complete all as specified and directed |
| 24 | S & F in repair 4 lever SS lock with key complete all as specified and directed |
| 25 | M & L for repair to TABLE BED SIDE SS TOP by taking down/removing the existing broken /unserviceable PPCP Top carefully and supply and fixing new Top of size 460X400 mm made of Stainless steel Grade I thickness 1.5mm thick to existing frames underneath and cut the corners to insert the existing legs including spray paint with synthetic enamel paint over red oxide primer on both inside and outside complete all as specified and shown on drawing |
| 26 | M & L for repair to TABLE BED SIDE SS TOP by taking down/removing the existing broken /unserviceable PPCP bottom chamber top sheet of size 460X400 mmand refix with new top sheetof Stainless steel Grade I thickness 1.5mm thick to existing frames underneath and cut the corners to insert the existing legs including spray paint with synthetic enamel paint over red oxide primer on both inside and outside complete all as specified and shown on drawing |
| 27 | TABLE BED SIDE STEEL: FD-133(M)/157 |
| 28 | S & F in replacement 50mm Butt hinges, stainless steel and fixed to various type of furniture article as shown on drawings complete all as specified and directed. |
| 29 | S&F in repair cabiner/Spring catcher as per sample for shutter door |
| 30 | S & F in replacement 25mm dia brass, chromium plated knob and fixed to various type of furniture article as shown on drawings complete all as specified and directed. |
| 31 | M & L for repair to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Topand supply and fixing of new Top of size 600x380mmmade out of 18mm thick prelaminated MDF boardexterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak woodcomplete all as specified, shown on drawing and as directed. (Drg No. FD-157) |
| 32 | M & L for repair to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Topand supply and fixing of new Top of size 550x330mm made of 12mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nailscomplete all as specified, shown on drawing and as directed. (Drg No. FD-133(M)) |
| 33 | M & L for repair to TABLE BED SIDE STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 150mm high by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed.(Note: Finishing coat of paint shall be measured and paid seperately) |
| 34 | M & L for repair to TABLE BED SIDE STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MSSquare pipe of size 25mm of wall thickness 1.6mm made to shape 150mm high by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed.(Note: Finishing coat of paint shall be measured and paid seperately) |
| 35 | COUCH EXAMINATION - MASSAGE (STEEL) / TABLE CUSHIONED : FD-122 / 135 |
| 36 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Long Rail carefully by cutting the welded ends with hand held machine and supply and fixing new Long Rail made of MS tube 25mm dia of wall thickness 1.6mm, 1800mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 37 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Short Rail carefully by cutting the welded ends with hand held machine and supply and fixing new Long Rail made of MS tube 25mm dia of wall thickness 1.6mm, 900mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 38 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square tube of size 25mm of wall thickness 1.6mm, 700mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 39 | M & L for repair to various type steel furniture articles by running welding at damaged joints of legs/stiffner etc n.exc 6mm thick of metal to be welded complete all as shown on drawing, as specified and directed. |
| 40 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Base of drawer carefully and supply and fixing new Base of drawer ply of size 600x380mm ofBWR 6mm thick plywoodfixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-122) |
| 41 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Back of drawer carefully and supply and fixing new Back of drawer of size 91x380mm made out of 12mm thick BWR plywood, both sides teak finished fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122) |
| 42 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Sides of drawer carefully and supply and fixing new Sides of drawer of size 91x600mm made out of 12mm thick BWR plywood, both sides teak finished fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122) |
| 43 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Shelf carefully and supply and fixing new Shelf of size 400x300mm made out of 12mm thick BWR plywood, both sides teak finished fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122) |
| 44 | M & L for repair to Drawers of COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by rejointing the existing disjointed portion of drawers with approved adhessive/screws/nails all as shown on drawings complete all as specified, shown on drawing and as directed. (Drg No. FD-122) |
| 45 | S & F in replacement Stainless steel spring, copper coated, 100mm dia, 100mm high duly fixed with cane stick 9mm dia as per the existing specifications and fixed to various type of furniture article as shown on drawings complete all as specified and directed. |
| 46 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceablecomplete fadded upholestery carefully and supply and fixing new complete leatherite upholestery of approved colour/shade of 1500mm wide cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135) |
| 47 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceablecomplete worn out foam alongwith cotton layer and hassian cloth carefully and supply and fixing new complete foam, 25mm thck 32 density alongwith 12 mm thick cotton layer and hassian cloth fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135) |
| 48 | CHAIR EASY (CUSHIONED) STEEL : FD-121(M) |
| 49 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square pipe of size 19mm of wall thickness 1.6mm made to shape 510mm high by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M)) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 50 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable Base Rail carefully by cutting the welded ends with hand held machine and supply and fixing new Base Rail made of MS Square pipe of size 19mm of wall thickness 1.6mm made to shape 700mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M)) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 51 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down the existing broken /unserviceable Hand Restand supply and fixing of new Hand Rest of size 19x65x700mm made out of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M)) |
| 52 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceablecomplete worn out fadded Leatherite Upholestery from Seat carefully and supply and fixing new complete Leatherite Upholestery from Seat of size 560x635mm of approved shade of cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M)) |
| 53 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceablecomplete worn out fadded Leatherite Upholestery from Back Rest carefully and supply and fixing new complete Leatherite Upholestery from Back Rest of size 560x355mm of approved shade of cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M)) |
| 54 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by rejointing the existing disjointed Flat iron cleats in between hand rest and MS square pipe by replacing the damaged steel scerws with new one of size 20x3 mm and fixed properly all as shown on drawings complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M)) |
| 55 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by rejointing the existing disjointed Metal Clamp at back side of seat rest by replacing the damaged steel scerws with new one and fixed properly all as shown on drawings complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M)) |
| 56 | REPLACEMENT OF U/S CASTOR WHEELS |
| 57 | 150 mm dia size for Bed stead iron : TP |
| 58 | 50 mm dia for Screen moveable : FD-83 |
| 59 | 50 mm dia for Table invalid SS: FD-131 |
| 60 | 50 mm dia for Step steel 3 / 2 / 1 tier front : FD-131 |
| 61 | LOCKER 3 / 4 / 6 UNIT : FD-127 |
| 62 | M & L for repair to LOCKER 3/4/6 UNIT by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg of size 420x100x100mmmade out of 1mm thick Mild steel sheet by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-127) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 63 | M & L for replacement of brass chromium plated handle of size 50mm long fixed with internal metal screws to varios type furniture articlescomplete all as specified, shown on drawing and as directed. |
| 64 | M & L for repair to LOCKER 3/4/6 UNIT by taking down/removing the existing broken /unserviceable Shutter carefully by cutting the welded ends with hand held machine and supply and fixing new Shutter as per the existing size and shapemade out of 1mm thick Mild steel sheet by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-127) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 65 | M & L for repair to LOCKER 3/4/6 UNITby taking down/removing the existing broken /unserviceable Lock from shutter carefully without disturbing the adjoining partsSupply and fixing of new 4 lever lock, brass with duplicate keys complete all as specified, shown on drawing and as directed. (Drg No. FD-127) |
| 66 | M & L for repair to LOCKER 3/4/6 UNITby taking down/removing the existing broken /unserviceable Hanging rod carefully without disturbing the adjoining partsSupply and fixing of new Hanging rod of brass chromium plated, 25mm dia, 1.6mm wall thickness, as per the existing length as shown on drawing duly fixed in exisiting support complete all as specified, shown on drawing and as directed. (Drg No. FD-127) |
| 67 | DESK SCHOOL CHILD TYPE \"A\" : FD-124 (M) |
| 68 | M & L for repair to DESK SCHOOL CHILD TYPE \"A\" by taking down/removing the existing broken /unserviceable Shelf Top carefully and supply and fixing new Shelf Top of size 900x800mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-124) |
| 69 | M & L for repair to DESK SCHOOL CHILD TYPE \"A\"by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 560mm high by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-124) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 70 | M & L for repair to DESK SCHOOL CHILD TYPE \"A\"by tightening the lossen Flat Iron strip of size 25x3mm on shorter side by replacing the screws etc as shown of drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-124) |
| 71 | M & L for repair to DESK SCHOOL CHILD TYPE \"A\"by Re-fixing of worn out existing wooden plank at back side and bottom side by replacing the screws etc as shown of drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-124) |
| 72 | DESK FOR SCHOOL DRG CWE/SK/263(R ) &BENCH FOR SCHOOL DRG CWE/SK/263- NSB : CWE/SK/263 & 263 ( R) |
| 73 | M & L for repair to DESK FOR SCHOOLby taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1200x450mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/263& 263 (R) ) |
| 74 | M & L for repair to BENCH FOR SCHOOLby taking down/removing the existing broken /unserviceable seat carefully and supply and fixing new seat of size 1200x450mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/263& 263 (R) ) |
| 75 | M & L for repair to DESK/ BENCH FOR SCHOOL by replacement of existing faded lamination carefully and supply and fixing new lamination of 1 mm thick, size 1200x450mm, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/263& 263 (R) ) |
| 76 | M & L for repair to DESK/ BENCH FOR SCHOOLby taking down/removing the existing broken /unserviceable Legs carefully by cutting the welded ends with hand held machine and supply and fixing new Legs made of MS pipe of size 25mm dia of wall thickness 1.6mm made to shape 600mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/263& 263 (R) ) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 77 | DESK FOR SCHOOL DRG CWE/SK/258 (R ) & BENCH FOR SCHOOL DRG CWE/SK/263(R ) - NSB : CWE/SK/258 & 258 (R ) |
| 78 | M & L for repair to DESK FOR SCHOOLby taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1500x450mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK /258 (R) |
| 79 | M & L for repair to BENCH FOR SCHOOLby taking down/ removing the existing broken /unserviceable seat carefully and supply and fixing new seat of size 1500x450mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/258(R) & 263 (R) ) |
| 80 | M & L for repair to DESK/ BENCH FOR SCHOOL by replacement of existing faded lamination carefully and supply and fixing new lamination of 1 mm thick, size 1500x450mm, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/258(R) & 263 (R) ) |
| 81 | M & L for repair to DESK/ BENCH FOR SCHOOLby taking down/removing the existing broken /unserviceable Legs carefully by cutting the welded ends with hand held machine and supply and fixing new Legs made of MS pipe of size 25mm dia of wall thickness 1.6mm made to shape 650mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/258(R) & 263 (R) ) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 82 | DESH WOODEN FOR KG CWE(P)/V/SK01 (DHC) : CWE(P)/SK-01 |
| 83 | M & L for repair to DESK WOODEN FOR KG by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1210 x 450mm made of 12mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No.CWE(P)/V/ SK-01 (DHC) ) |
| 84 | M & L for repair to DESK WOODEN FOR KG by taking down the existing broken /unserviceable Legand supply and fixing of new Legs made to shape of size 50mmx50mm and 450mm long of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK01 (DHC)) |
| 85 | M & L for repair to TABLE DESK WOODEN FOR KG by taking down the existing broken /unserviceable Long railand supply and fixing of new long Rail of size 50mmx25mm, 1110 mm long made out of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No.CWE(P)/V/SK01 (DHC)) |
| 86 | M & L for repair to TABLE DESK WOODEN FOR KG by taking down the existing broken /unserviceable Short railand supply and fixing of new Short Rail of size 25mmx25mm, 350 mm long made out of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No.CWE(P)/V/SK-01 (DHC)) |
| 87 | CHAIR WOODEN FOR KG CWE(P)/V/SK02 (DHC) : CWE(P)/SK-02 |
| 88 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable front Legand supply and fixing of new front Legs made to shape of size 40mmx40mm and 295 mm long of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC)) |
| 89 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable rear Legand supply and fixing of new rear Legs made to shape of size 40mmx40mm and 600 mm long of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC)) |
| 90 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable short stiffenerand supply and fixing of new short stiffener made to shape of size 50mmx25 mm and 275 mm long of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC)) |
| 91 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable long stiffenerand supply and fixing of new long stiffener made to shape of size 50mmx25 mm and 305 mm long of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC)) |
| 92 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable seat baseand supply and fixing of new seat base made to shape of size 305mmx275 mm of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC)) |
| 93 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable top rest and supply and fixing of new top rest made to shape of size 25 mmx 50 mm and 280mm long of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC)) |
| 94 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable middle rest and supply and fixing of new middle rest made to shape of size 25 mmx 35 mm and 280mm long of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC)) |
| 95 | DESK AND BENCH (NSB) : SKT-01 |
| 96 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable desk Top with plank carefully and supply and fixing new desk Top of size 910x350mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-01) |
| 97 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable bench Top with plank carefully and supply and fixing new bench Top of size 910x 275 mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-01) |
| 98 | DESK AND BENCH (NSB) : SKT-02 |
| 99 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable desk Top with plank carefully and supply and fixing new desk Top of size 910x 420mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-02) |
| 100 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable bench Top with plank carefully and supply and fixing new bench Top of size 910x 320 mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-02) |
| 101 | DESK AND BENCH (NSB) : SKT-01 |
| 102 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable bench Top with plank carefully and supply and fixing new bench Top of size 910x 430 mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-03) |
| 103 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable bench Top with plank carefully and supply and fixing new bench Top of size 910x 330 mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-03) |
| 104 | SOFA SET 4 SEATER (3+1) / SOFA 3 SEATER (2+1)(FD-272 / 258) |
| 105 | M & L for repair to SOFA SET 4 SEATER (3+1) by removing the following unserviceable components carefully without damaging the adjacent wooden parts, tightening the entire wooden frame using nails and screws and carry out the following works in sequence complete all as specified, shown on drawing and as directed:-(i) Cool foam of density 40 of approved make in seat, back and sides (ii) SS spring 100 mm dia Copper coated of 100 mm high to be replaced with U/S one duly fixed with cane stick 9 mm dia (iii) Hessain cloth for the base and side at the egdes & base (iv) Markin cloth as initial cover over cool foam(v) Replacement of tapestry cloths for Base and Back rest of superior quality of approved shade/colour by the user of 4\" wide, costing not less than Rs. 600.00 Per RM, duly stiched by the upholster asdirected by theEngr-in-charge (Drg No : FD-272) |
| 106 | M & L for repair to SOFA 3 SEATER (2+1) by removing the following unserviceable components carefully without damaging the adjacent wooden parts, tightening the entire wooden frame using nails and screws and carry out the following works in sequence complete all as specified, shown on drawing and as directed:-(i) Cool foam of density 40 of approved make in seat, back and sides (ii) SS spring 100 mm dia Copper coated of 100 mm high to be replaced with U/S one duly fixed with cane stick 9 mm dia (iii) Hessain cloth for the base and side at the egdes & base (iv) Markin cloth as initial cover over cool foam(v) Replacement of tapestry cloths for Base and Back rest of superior quality of approved shade/colour by the user of 4\" wide, costing not less than Rs. 600.00 Per RM, duly stiched by the upholster asdirected by theEngr-in-charge(Drg No : FD-258) |
| 107 | LOCKER BEDSIDE STEEL : FD-1029 |
| 108 | S & F in repair 75x40 mm size 3 mm thick hasp & staple, safety type, aluminum anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws to various type of furniture articles complete all as specified, shown on drawing and as directed. (Drg No. FD-1029) |
| 109 | S&F in repair stainless steel conduit pipe of 20 mm dia of lengh 380 mm incluing two socket to support conduit pipe complete all as specified, shown on drawing and as directed |
| 110 | M & L for repair to LOCKER BED SIDE STEEL by taking down/removing the existing broken /unserviceable Leg from bottom of locker carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Leg made of 1.5mm thick MS sheet of size 600x100x100mm fixed to locker to the existing place through welding and rivetingand applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. (Drg No. FD-257/1029) |
| 111 | Taking down/removing the existing broken /unserviceable MS hinges of size 75 mm from Door Shutter of Almirah steel carefully without disturbing the adjoining parts including Supply and fixing new hinges of existing size andspecificationscompleteshown on drawing and as directed |
| 112 | M & L for repair to LOCKER BED SIDE STEEL by taking down/removing the existing broken /unserviceable dented/hanging Door Shutter(size 1020 x 380 mm) carefully without disturbing the adjoining partsre-fixed the same to almirah complete all as specified, shown on drawing and as directed. (Drg No. FD-257/1029) |
| 113 | TABLE FOR HAVS AND ORS : FD-223 |
| 114 | M & L for Repairs to TABLE FOR HAVS AND ORSby taking down the existing broken /unserviceable Legs and replacing the same with new Legs of size 60 x 60 at top and 30 x 30at bottom of long 760 mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed.(Drg No. FD-223) |
| 115 | M & L for Repairs to TABLE FOR HAVS AND ORS by taking down the existing broken /unserviceable Top Long Rail and replacing the same with new Top Long Rail of size 900mmx65mmx25mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed.(Drg No. FD-223) |
| 116 | M & L for Repairs to TABLE FOR HAVS AND ORS by taking down the existing broken /unserviceable Top Short Rail and replacing the same with new Top Short Rail of size 600mmx65mmx25mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed.(Drg No. FD-223) |
| 117 | M & L for Repairs to TABLE FOR HAVS AND ORS by taking down the existing broken /unserviceable Top and replacing the same in position with new Top made of 18mm thick prelaminated MDF board, exterior grade of size 900mm x 600mm with 4mm thick teak wood beading alround its edges duly fixed with suitable wooden screw all as shown on drawing, complete all as specified and directed..(Drg No. FD-223) |
| 118 | M & L for Repairs to TABLE FOR HAVS AND ORS by taking down the existing broken /unserviceable bottom Stiifener and replacing the same with new bottom Stiifener of size 900mmx40mmx25mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed.(Drg No. FD-223) |
| 119 | TABLE DINING OR : FD-165 |
| 120 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 760mm high by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-165) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 121 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Long Rail carefully by cutting the welded ends with hand held machine and supply and fixing new Long Rail made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 1600mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-165) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 122 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Short Rail carefully by cutting the welded ends with hand held machine and supply and fixing new Short Rail made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 515mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-165) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 123 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable foot rest carefully by cutting the welded ends with hand held machine and supply and fixing new Long foot rest made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 1600mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-165) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 124 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Side Stiffner carefully by cutting the welded ends with hand held machine and supply and fixing new Side Stiffner made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 515mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-165) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 125 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Aluminium Top Sheet carefully and supply and fixing new Aluminium Top Sheet of 22 Gauge of size 1975x760mm having glossy finish fixed to table top all as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-165) (Note: Finishing coat of paint shall be measured and paid seperately) |
| 126 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1900x685mm made of 18mm thick plywood, BWR grade fixed headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-165) |
| 127 | M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Screws from Top carefully and replaceing with new MS Screw nails of 40mm long and fixed properly the Top of table complete all as specified, shown on drawing and as directed. (Drg No. FD-165) |
| 128 | DOUBLE BUNK CHARPOY STEEL : FD-112 |
| 129 | M & L for repair to CHARPOY DOUBLE BUNK by taking down/removing the existing broken /unserviceable newar from both the berth and S & F new 12mm thick plywood, BWR grade-AA of size 2030x910 mm by making necessary cutting at edges duly fixed on GI pipe frame with 10mm dia nuts, bolts and washer complete all as specified, shown on drawing and as directed. (Drg No. FD-112) |
| 130 | S & F 25 mm square MS Pipe of 1.6 mm thick of910 mmlengthof approved brand, duly welded the ends to the long rail at an equal distance underneath rails for better grip while placing the Ply top |
| 131 | Welding the existing wornout 100x40x6 mm FI clamp to achieve stability to existing base stiffner for each berth |
| 132 | S&F 9 mm dia machine screw for upper and lower berth in the charpoy in lieu of broken/dismantled one complete all as specified, shown on drawing |
| 133 | S&F 25x3 mm FI clamps for holding MNF in lieu of existing broken one, including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing |
| 134 | CHARPOY GIPLYTOP FD-220 R |
| 135 | M & L for repair to CHARPOY GI PLYTOPby taking down the existing broken /unserviceable angle frame and replacing the same with new MS angle frame of size 25x25x3 mm, 890 mm long fixed to charpoy by welding the ends to both side long rail at an equal distance for resting the ply top and connecting to 32 mm GI pipe from underneath including two coats of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer all as shown on the drawing, as specified and as directed.(Drg No. FD-220(R) |
| 136 | M & L for repair to CHARPOY GI PLYTOPby taking down the existing broken /unserviceable square frame and replacing the same with new MS square frame of size 25 mm of 1.6 mm thick ,890 mm length fixed to charpoy by welding the ends to both side long rail at an equal distance for resting the ply top and connecting to 32 mm GI pipe from underneath including two coats of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer all as shown on the drawing, as specified and as directed.(Drg No. FD-220(R) |
| 137 | M & L for Repairs to Charpoy CHARPOY GI PLYTOP by taking down the existing broken /unserviceable legs and replacing the same with newMS conduit pipe leg of 32 mm dia of 18 gauge,440 mm longfixed to existing 3 way elbow all as shown on drawing, as specified and as directed.(Drg No. FD-220[R]) |
| 138 | S&F in repair 32 mm dia GI 3 way elbow all as shown on drawing, as specified and as directed. |
| 139 | S&F in repair GI checknut complete all as shown on drawing, as specified and as directed. |
| 140 | M & L for repair to CHARPOY GI PLYTOP by taking down/removing the existing broken /unserviceable Plytop and S & F new plytop pf 12mm thick plywood, BWR grade-AA of size 1980x900mm by making necessary cutting at edges duly fixed on GI pipe frame with 10mm dia nuts, bolts and washer complete all as specified, shown on drawing and as directed. (Drg No. FD-220 R) |
| 141 | SOFA SINGLE SEATER : FD-373 |
| 142 | M & L for repair to SOFA SET SINGLE SEATER, by Removing broken legs of sofa chairs carfeuly without damaging the adjacent parts, supply and fixing the new legs of size 70x35x515mm made of 1st class teak wood using screw complete all as specified and as shown on drawing and as directed. (Drg No.FD-373) |
| 143 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken arm rest of sofa chairs carfeuly without damaging the adjacent parts, supply and fixing the new arm rest of size 70x35x745mm made of 1st class teak wood using screw complete all as specified and as shown on drawing and as directed. (Drg No.FD-373) |
| 144 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken batten of sofa chairs carfeuly without damaging the adjacent parts, supply and fixing the new batten of size 50x20x585mm made of 1st class teak wood using screw complete all as specified and as shown on drawing and as directed. (Drg No.FD-373 |
| 145 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken short rail carfeuly without damaging the adjacent parts, supply and fixing the new short rail of size 100x35x570 mm made of 1st class teak wood using screw complete all as specified and as shown on drawing and as directed. (Drg No.FD-373) |
| 146 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken long rail carfeuly without damaging the adjacent parts, supply and fixing the new long rail of size 100x35x625 mm made of 1st class teak wood using screw complete all as specified and as shown on drawing and as directed. (Drg No.FD-373) |
| 147 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken short bearer of sofa carfeuly without damaging the adjacent parts, supply and fixing the new short bearer of size 40x40x530mm made of 1st class teak wood using screw complete all as specified and as shown on drawing and as directed. (Drg No.FD-373) |
| 148 | S & F in repair Nylon bushes for legs of sofa chair |
| 149 | M & L for repair to SOFA 1/4/5 SEATER by Removing the old unserviceable torn / worns out Cushion cover carefully and supply and fixing new Cushion cover (21\"x22\"x4\") of approved colour and shade not less than Rs. 400.00 per mtr duly stiched with Zip of best quality all as shown on drawing and as directed. (Note: Cushion cover/Tapestry cloth:- It shall be heavy linen look fabric, plain velvet fabric or as per approved sample placed in BSO yard . (Drg No. FD-373) |
| 150 | M & L for repair to SOFA 1/4/5 SEATER by Removing the old unserviceable torn / worns out Foam Cool carefully and supply and fixing new Foam Cool of size 530x560x100mm thick of density 40 of approved make all as shown on drawing and as directed. (Drg No. FD-373) |
| 151 | CHAIR VARENDAH (MESS) : FD-359 |
| 152 | M & L for repair to CHAIR VERANDAH (MESS) by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 20mm dia conduit of 1.6mm thick, fixed by proper gas welding and applying one coat of red oxide zinc chrome primer to the external surfaces of new conduit after preparation of surfaces complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-359) |
| 153 | M & L for repair to CHAIR VERANDAH (MESS) by Painting frame of the Chair verandah with two coats of Milk white colour synthetic enamel paint of approved 1st quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth and make smooth by applying metal putty where required complete all as directed by Engineer-in-charge and as specified. (Drg No. FD-359) |
| 154 | M & L for repair to CHAIR VERANDAH (MESS) by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-359)(Note: The caning of chairs shall be carried only after finishing with painting all as required at site.) |
| 155 | S&F in repair PVC hard shoe cap complete all as specified and directed |
| 156 | BIN SOILED LENIN SMALL (CANE) 750X450X450 : FD-15 / 244 |
| 157 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable legsand supply and fixing of new legs made to shape of size 40 mm dia at top,25 mm dia at bottom and 75 mm high of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 158 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable legsand supply and fixing of new legs made to shape of size 45 X45 mm at top, 25 X25 mm at bottom and 100 mm high of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 159 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing short stiffenerand supply and fixing of new short stiffeners of size 400x19 mm of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 160 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing wooden plank on leg tops and supply and fixing of new 12 mm thick plank of size 880x450 mm of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 161 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing vertical member and supply and fixing of new vertical member of size 45x45 mm of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 162 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing top rail and supply and fixing of new top rail of size 45x19 mm of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 163 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing bottom rail and supply and fixing of new bottom rail of size 57x19 mm of 1st class teak wood as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 164 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing plywood from front/back and supply and fixing of new 6 mm thick BWR plywood, one side teak finished(Apprx size 350x730 mm) as per drgcomplete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 165 | M & L for repair to Bin soiled lenin (Cane) by taking down the existing plywood from top and supply and fixing of new 6 mm thick BWR plywood, one side teak finished(Apprx size 450x750 mm)complete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 166 | S & F in repair MS Butt hinges 75 mm long with SS srews for openable lid at top complete all as specified and directed |
| 167 | M & L for repair to Bin soiled lenin (Cane) by removing u/s worn out TW edging and supply and fixing of new edging of size 6x25 mm of 1st class teak wood complete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 168 | M & L for repair to Bin soiled lenin (Cane) by removing u/s worn out cane from sides and recanning the with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick complete all as specified, shown on drawing and as directed. (Drg No. FD-15) |
| 169 | CHAIR DINING LONG BACK ( OFFICER MESS) : TP/SK-15 |
| 170 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg of size 30x30x990 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-15) |
| 171 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining partsSupply and fixing of new Front leg of size 50x50x460 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-15) |
| 172 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable side rail/Front/back rail (seat base) carefully without disturbing the adjoining partsSupply and fixing of new side rail/Front/back rail (seat base)of size 25x50x370 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-15) |
| 173 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Side / centrer stiffener connecting for rear/front legs carefully without disturbing the adjoining partsSupply and fixing of new Side / centrer stiffener connecting for rear/front legs of size 25x50x405 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-15) |
| 174 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Back rest frames carefully without disturbing the adjoining partsSupply and fixing of new Back rest frames of size 25x20x500 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-15) |
| 175 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Back rest Top stiffener carefully without disturbing the adjoining partsSupply and fixing of new Back rest Top stiffener of size 25x45x380 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-15) |
| 176 | Tightening the existing triangular corner bits underneath the seat connecting base stiffener complete all as directed (Drg No. TP/SK-15&16) |
| 177 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining partsSupply and fixing of new seat (size 430 x 460 mm) made of 12 mm thick BWR Ply wood covered on top with 40 density cool foam of 75mm thick, duly covered with best quality leatherite cover, shall be fixed with in / over the wooden frame by using black gypsum screws from beneath through corner brackets and shade as approved by GE complete all as shown on drawing and as directed. (Drg No. TP/SK-15) |
| 178 | CHAIR DINING OVAL BACK (OFFICER MESS) : TP/SK-16 |
| 179 | M & L for repair to CHAIR DINING OVAL BACKby taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg of size 30x30 (bottom), 45x45 (centre) and 50 x 50(top) of length 900 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-16) |
| 180 | M & L for repair to CHAIR DINING OVAL BACKby taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining partsSupply and fixing of new Front leg of size 30x30 (bottom), 45x45 (centre) and 50 x 50(top) of length 400 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-16) |
| 181 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable side/front rail (seat base) carefully without disturbing the adjoining partsSupply and fixing of new side /front rail (seat base)of size 25x60x420 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-16) |
| 182 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable back rail (seat base) carefully without disturbing the adjoining partsSupply and fixing of new back rail (seat base)of size 25x60x360 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-16) |
| 183 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable Side / centrer stiffener connecting for rear/front legs carefully without disturbing the adjoining partsSupply and fixing of new Side / centrer stiffener connecting for rear/front legs of size 25x25x420 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-16) |
| 184 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable back rest framecarefully without disturbing the adjoining partsSupply and fixing of new back rest frame of size 15x20x440 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-16) |
| 185 | M & L for repair to CHAIR DINING OVAL BACK by taking down/removing the existing broken /unserviceable back rest Top stiffener carefully without disturbing the adjoining partsSupply and fixing of new back rest Top stiffener of size25x 60 x 460 mm (curve shaped) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP/SK-16) |
| 186 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining partsSupply and fixing of new seat (size 430 x 360 mm) made of 12 mm thick BWR Ply wood covered on top with 40 density cool foam of 50 mm thick, duly covered with best quality leatherite cover, shall be fixed with in / over the wooden frame by using black gypsum screws from beneath through corner brackets and shade as approved by GE complete all as shown on drawing and as directed. (Drg No. TP/SK-16) |
| 187 | CHAIR DINING LONG BACK (VISAKHA) : TP-VISAKHA |
| 188 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg of size 40x40x900 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. |
| 189 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining partsSupply and fixing of new Front leg of size 45x45x400 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. |
| 190 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable side rail carefully without disturbing the adjoining partsSupply and fixing of new side rail of size 25x60x420 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. |
| 191 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Front/back rail (seat base) carefully without disturbing the adjoining partsSupply and fixing of new Front/back rail (seat base) of size 25x70x420 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. |
| 192 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Side / centrer stiffener connecting for rear/front legs carefully without disturbing the adjoining partsSupply and fixing of new Side / centrer stiffener connecting for rear/front legs of size 45 x 25 x 430 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. |
| 193 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Back rest horizontal frames carefully without disturbing the adjoining partsSupply and fixing of new Back rest horizontal frames of size 90 x 25 x 400 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. |
| 194 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Back rest horizontal frames carefully without disturbing the adjoining partsSupply and fixing of new Back rest horizontal frames of size 90 x 30 x 400 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. |
| 195 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable Side / centrer stiffener connecting for rear/front legs carefully without disturbing the adjoining partsSupply and fixing of new Side / centrer stiffener connecting for rear/front legs of size 20 x 35 x 420 mm made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. |
| 196 | M & L for repair to CHAIR DINING LONG BACK by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining partsSupply and fixing of new seat (size 500 x 490 mm) made of 12 mm thick BWR Ply wood covered on top with 40 density cool foam of 50 mm thick, duly covered with best quality leatherite cover, shall be fixed with in / over the wooden frame by using black gypsum screws from beneath through corner brackets and shade as approved by GE complete all as shown on drawing and as directed. |
| 197 | HAT STAND SMALL /LARGE (WITH MIRROR) : FD-361 / 362 |
| 198 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Looking Mirror and replacing the same with new Looking Mirror of size 440mmx300mm made of 5mm thick glass duly fixed with teak wood beading made of 10mmx12mm section as required all as shown on drawing, complete all as specified and directed. |
| 199 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Back and replacing the same in position with new Back made of 6 mm thick BWR plywood of size 1000mm x 710mm fixed with suitable screw/adhesive all as shown on drawing, complete all as specified and directed. |
| 200 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Back and replacing the same in position with new Back made of 6 mm thick BWR plywood of size 1330 mm x 710mm fixed with suitable screw/adhesive all as shown on drawing, complete all as specified and directed. |
| 201 | S & F in Repairs Stainless Steel Pegs of size 75x120mm duly fixed with brass screw as required all as shown on drawing, complete all as specified and directed. |
| 202 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Teak Wood Beading and replacing the same with new Teak Wood Beading of size 35mmx6mm fixed with screws as required all as shown on drawing, complete all as specified and directed. |
| 203 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Front Face and replacing the same in position with new Front Face made of 4mm thick teak faced BWR plywood of size 1000mm x 710mm fixed with suitable screw/adhesive all as shown on drawing, complete all as specified and directed.. |
| 204 | M & L for Repairs to HAT STAND WITH MIRROR by taking down the existing broken /unserviceable Front Face and replacing the same in position with new Front Face made of 4mm thick teak faced plywood of size 1330mm x 710mm fixed with suitable screw/adhesive all as shown on drawing, complete all as specified and directed. |
| 205 | TABLE DRESSING LADIES : FD-378 |
| 206 | M & L for Repairs to TABLE DRESSING LADIES by taking down the existing broken /unserviceable Looking Mirror and replacing the same in position with new Looking Mirror made of 5mm thick glass of size 1220x370mm duly supported with 6mm thick plywood, BWR, Grade A and fixed all as shown on drawing complete all as specified and directed. |
| 207 | Taking down the existing broken /unserviceable Teak Wood Beading and replacing the same with new Teak Wood Beading of size 35mmx45mm fixed with screws as required all as shown on drawing, complete all as specified and directed. |
| 208 | M & L for Repairs to TABLE DRESSING LADIES by taking down the existing broken /unserviceable Back and replacing the same in position with new Back made of 6 mm thick Plywood, BWR, Grade-A of size 1220mm x 370mm duly fixed with suitable wooden screw all as shown on drawing, complete all as specified and directed. |
| 209 | M & L for Repairs to TABLE DRESSING LADIES by taking down the existing broken /unserviceable chamber and S & F new chamber made of 18 mm thick MDF board of size 380x900x450 mm with alround 3 mm TW beeding and two drawers having 12 mm TW at back & sides and 6 mm ply at bottom made to shape of size 425x160x380 mm with four hard wood base 60x10 mm size in four base corner all as shown on drawing, complete all as specified and directed. |
| 210 | M & L for Repairs to TABLE DRESSING LADIES by taking down the existing broken /unserviceable Sliding glass and replacing the same in position with new Sliding glass made of 5.5mm thick plain sheet glass of size 425x160 mm duly fixed in existing Al channel at bottom upper space of bottom chamber all as shown on drawing, complete all as specified and directed |
| 211 | S & F in repair SS knobs 40 mm dia complete all as specified and directed |
| 212 | DRESSING STOOL : FD-374 |
| 213 | M & L for Repairs to DRESSING STOOL by taking down the existing damaged Seat Cushion and replacing the same in position with new Seat Cushion made to shape of size 380x450 mm with 50mm thick32 density PU foam duly covered with best quality tapestry cloth of rate not less than Rs. 400.00 per Metre complete all as shown on drawing, complete all as specified and directed |
| 214 | TABLE DRESSING GENTS : FD-379 |
| 215 | M & L for Repairs to TABLE DRESSING GENTS by taking down the existing broken /unserviceable Looking Mirror and replacing the same in position with new Looking Mirror made of 5.5mm thick glass of size 760x380mm duly supported with 6mm thick plywood, BWR, Grade A and fixed all as shown on drawing complete all as specified and directed. |
| 216 | taking down the existing broken /unserviceable Teak Wood Beading and replacing the same with new Teak Wood Beading of size 25mmx25 mm fixed with screws as required all as shown on drawing, complete all as specified and directed. |
| 217 | M & L for Repairs to TABLE DRESSING GENTS by taking down the existing broken /unserviceable Back and replacing the same in position with new Back made of 6 mm thick Plywood, BWR, Grade-A of size 760mm x 380mm duly fixed with suitable wooden screw all as shown on drawing, complete all as specified and directed. |
| 218 | S&F in repair new TW batten of size 25x35x1090 mm complete all as specified and directed. |
| 219 | M & L for Repairs to TABLE DRESSING GENTS by taking down the existing broken /unserviceable chamber and S & F new chamber made of 18 mm thick MDF board of size 300x900x150 mm with alround 3 mm TW beeding and two drawers having 12 mm TW at back & sides and 6 mm ply at bottom made to shape of size 425x160x380 mm with four hard wood base 60x10 mm size in four base corner all as shown on drawing, complete all as specified and directed. |
| 220 | S & F in repair SS knobs 30 mm dia complete all as specified and directed |
| 221 | BED HARD PLY TOP(FD-213 / 264) |
| 222 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden long rail and replacing the same with new long rail of size 1980x90x35mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. |
| 223 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden Short rail at Foot/Head board and replacing the same with new Short rail of size 900x40x60mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. |
| 224 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden Batten from Foot/Head board and replacing the same with new Batten of size 60x30x840mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. |
| 225 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden Vertical Batten from Foot/Head board and replacing the same with new Vertical Batten of size 75x22x220mm made of well seasoned soft wood after cutting, made to shape and size and equally spaced from each other before connecting Top or bottom battens inside Foot/Head board as required all as shown on drawing complete all as specified and directed. |
| 226 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable 4mm thick veneer ply from head board at one side and replacing the same with new 4mm thick veneer/OST ply of size 780x340mm, one side teak finished in position duly fixed with adhesive and headless nails all as shown on drawing complete all as specified and directed. |
| 227 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable 4mm thick veneer ply from foot board at one side and replacing the same with new 4mm thick veneer/OST ply BWR grade of size 780x180mm, one side teak finished in position duly fixed with adhesive and headless nails all as shown on drawing complete all as specified and directed. |
| 228 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable Beading from foot/head board and replacing the same with new Beading, 12 mm dia half cut teak wood beading by using adhesive and headless nails, made to shape and size as required all as shown on drawing complete all as specified and directed. |
| 229 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden leg from head board and replacing the same with new leg of size 660x60x60mm at top and 660x30x30 mm at bottom, made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. |
| 230 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden leg from foot board and replacing the same with new leg of size 500x60x60mm at top and 500x30x30 mm at bottom, made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. |
| 231 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden stiffner and replacing the same with new stiffner of size 900x40x60mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed |
| 232 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable plywood top and replacing the same with new top of 12mm thick plywood BWR, grade-AA of size 1980mm x 900mm with 12 Nos of 40mm long countersunk wood screw, made to shape and size as required all as shown on drawing complete all as specified and directed. |
| 233 | M & L for Repairs to Bed Hard plywood top by taking down the existing broken /unserviceable wooden corner triangular bracket and replacing the same with new corner bracket of size 100x100x25mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed. |
| 234 | M & L for Polishing tobed Hard plywood top with two or more coats of french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship all as directed by Engineer-in-charge and as specified.(Note: The polishing shall be carried out after making the article intact by tightening all parts and carrying out anti termite and anti bugtreatment. The cost of the same is deemed to be included with the unit quoted rate of the item |
| 235 | ALMIRAH LARGE STEEL 1/2 H X 1/2 S : FD-114 |
| 236 | S & F in repair Lock, 75x50 mm size, 6 lever lock, brass with duplicate keysfixed with screw/ spot weld to shutter of almirahs all as specified and directed by Engr-in-Charge. |
| 237 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 S by taking down/removing the existing broken /unserviceable Box Cover carefully without disturbing the adjoining partsSupply and fixing of new key Box Cover made of 1 mm thick MS sheet of same size 250x120x40 mm duly fixed fixed to almirah steel and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. |
| 238 | Supply and fixing in repair 3-way assembly including 6mm thick bars round with necessary fittings of approved quality complete all as specified and directed by Engr-in-Charge. |
| 239 | S & F in repair Handle, 120mm size, chromium plated fixed to various furniture articles complete all as specified, shown on drawing and as directed. |
| 240 | Removing old unserviceable broken bush between 3 way lock devicefrom Almirahs and supply and fix new brass bush as directed by Engr-in-Charge. |
| 241 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 S by taking down/removing the existing unserviceable/rusted bottomsheet and supply and fix new bottom made out of 1mm thick MS sheet made to shape and size (920 X 485 mm) as on drawing and fixing by welding matching with existing almirah and one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified, shown on drawing and as directed.. |
| 242 | S & F in repair 20mm dia hanging/curtain rod, 1.25mm wall thickness, chromium plated with and including CP end socket/bracketfixed with screws to various type of furniture articles complete all as specified, shown on drawing and as directed. |
| 243 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 S by taking down/removing the existing broken /unserviceable Leg carefully without disturbing the adjoining partsSupply and fixing of new Leg made of 1.5 mm thick MS sheet of same size 100(W)x 480(L)x 100(H) mm duly fixed fixed to almirah steel and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. |
| 244 | M& Lfor Removing old broken hinges of Almirahs steeland S & F new MS hinges or U clips 70 / 75mm long duly welded complete all as specified and directed by Engr-in-Charge. |
| 245 | ALMIRAH LARGE STEEL / SMALL STEEL : FD-350 / 351 |
| 246 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Lock from shutter carefully without disturbing the adjoining partsSupply and fixing of new 6 lever lock,size (75x50) mm, brass with duplicate keys complete all as specified, shown on drawing and as directed. |
| 247 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Inside Box Cover carefully without disturbing the adjoining partsSupply and fixing of new Inside Box Cover made of 1 mm thick MS sheet of size 250x120mm duly fixed to almirah steel and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by spraying complete all as specified, shown on drawing and as directed |
| 248 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable 3-Way locking assembly from shutter carefully without disturbing the adjoining partsSupply and fixing of new 3-Way locking assembly made of 6mm dia mild steel round bar with necessary fittings of approved quality and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as per the existing specification, shown on drawing and as directed. |
| 249 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Handle from shutter carefully without disturbing the adjoining partsSupply and fixing of new Handle, 120mm size, chromium plated complete all as specified, shown on drawing and as directed. |
| 250 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable broken bush between 3 way locking device carefully without disturbing the adjoining partsSupply and fixing of new bush as per the existing size and specifications complete all as specified, shown on drawing and as directed. |
| 251 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Bottom sheet of size (950x450)mm carefully without disturbing the adjoining partsSupply and fixing of new Bottom sheet made of 1 mm thick MS sheet of same size and shape duly fixed fixed to almirah steel and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. |
| 252 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Leg from bottom of almirah small/medium carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Leg made of 1.5mm thick MS sheet of size 440x100x80mm fixed to almirah steel to the existing place through welding and rivetingand applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. |
| 253 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Leg from bottom of almirah large carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Leg made of 1.5mm thick MS sheet of size 480x100x100mm fixed to almirah steel to the existing place through welding and rivetingand applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. |
| 254 | S & F in repair mild steel Hinge or U clip 70/75mm long duly welded to various type of furniture articles complete all as specified, shown on drawing and as directed. |
| 255 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Shelves carefully without disturbing the adjoining partsSupply and fixing of new Shelves made of 1 mm thick MS sheet of size 440x800mm fixed to almirah steel with cleats, nuts & bolts and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by sprayingcomplete all as specified, shown on drawing and as directed. |
| 256 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable dented/hanging Door Shutter carefully without disturbing the adjoining partsre-fixed the same to almirah with and including new hinges as per the existing specificationscomplete all as specified, shown on drawing and as directed. |
| 257 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing dented/hanging Shelves carefully without disturbing the adjoining partsand re-fixed the same to almirah steel with new cleats, nuts & bolts complete all as specified, shown on drawing and as directed. |
| 258 | S & F in repair 100 mm long Aluminium handle with oven baked finish complete all as specified and directed |
| 259 | S&F hard rubber shoe complete all as specified and directed |
| 260 | M & L for preparation of old painted steel surface by filling metal putty to the uneven surfaces and remove the all dust etc with a fine cloth and applying spray painting with two coats of synthetic enamel paint (1st quality) of approved make as per existing shade externally and internally over a coat red oxide primer complete all as specified and as shown on drawing. (Note: The work will be excecuted at various units |
| 261 | Table bedside steel : FD-76 /133(m) /157 |
| 262 | Couch examination - massage (steel) / Table cushioned : FD-122 / FD-135 |
| 263 | Rack towel tubular steel 380 w x 915 H mm: FD-81 |
| 264 | Rack stationery steel 380 L X 230 W X 330 H mm: FD-81 |
| 265 | Stool steel 305 L X 305 W X 510 H mm: FD-81 |
| 266 | Stool steel 305 L X 305 W X 760 H mm: FD-81 |
| 267 | Screen moveablethree-fold (1650 h x 2400 w): FD-83 |
| 268 | Table invalid tubular frame of size 1070 x 460 x 415 mm: FD-131 |
| 269 | Step steel 1 tier (size 460x 460 x 150 mm) : FD-131 |
| 270 | Step steel 2 tier (size 460x 460 x 300 mm) : FD-131 |
| 271 | Step steel 3 tier (Size 460 x 460 x 450 mm): FD-131 |
| 272 | Stool adjustable with SS top 330 mm dia: FD-119 |
| 273 | Stool revolving adj with cushion top 380 mm dia: FD-103 |
| 274 | Locker steel 3 unit ( size 1050 H X 920 L X 485 w mm): FD-127 |
| 275 | Locker steel 4 unit ( size 1010 H x 930 l X 430 w mm): FD-127 |
| 276 | Locker steel 6 unit (size 1455 h x 930 l x 430 w mm): FD-127 |
| 277 | Rack pigeon hole steel (size 1905 h x 915 l x 305/610 w mm): FD-106 |
| 278 | Table tubular SS top (size 1220 l x 610 w x 760 w mm ) : FD-119 |
| 279 | Table tubular SS top (size 1670 l x 760 w x 750h mm): FD-90 |
| 280 | Table tubular SS top (size 920 l x 920 w x 760 h mm) : FD-142 |
| 281 | Table tubular SS top (szie 2100 l x 900 w x 760 h mm): FD-144 |
| 282 | Locker Bedside steel (internal & external) : FD-1029 |
| 283 | Table folding tubular steel (size 600 x 600 x 760 mm): FD-142 |
| 284 | Almirah large steel with shelves (Adjustable): FD-67 |
| 285 | Almirah medium/small steel with shelves (Adjustable): FD-67 |
| 286 | Almirah large steel (Glazed): FD-104 |
| 287 | Almirah medium steel (Glazed): FD-104 |
| 288 | Almirah medium steel 1/2 H x 1/2 S : FD-114 |
| 289 | Book case steel (Glazed): FD-90 |
| 290 | Couch examination message: FD-122 |
| 291 | Table cushioned: FD-135 |
| 292 | Box ice steel: FD-73 |
| 293 | Chair easy cushioned steel : FD-121 |
| 294 | Chair invalid wheeled (Non-folding): HFD-21 |
| 295 | Trolley for clyinder steel : FD-132 |
| 296 | Board for fire order/Hospital rules (steel): FD-131 |
| 297 | Trestle store room steel: FD-86 |
| 298 | Rack adjustable 6 tier (1905x 915 x 610 mm): FD-106 |
| 299 | Rack adjustable 3 tier ( 990 x 915 x 610 mm): FD-106 |
| 300 | Side rack with trays ( 685 x 255 x 760 mm): FD-97 |
| 301 | Desk for School Drg CWE/SK/263(R ) &Bench for School Drg CWE/SK/263- NSB: CWE/SK/263 & 263 ( R) |
| 302 | Desk for School Drg CWE/SK/258 (R ) & Bench for School Drg CWE/SK/263(R ) - NSB : CWE/SK/258 & 258 (R ) |
| 303 | Desk school child type (Type A): FD-124 |
| 304 | Table morturey Steel 2000 x 760x 760: FD-143 |
| 305 | Table steel 2100 x 900 x 760 mm: FD-144 |
| 306 | Almirah medium steel Adjustable shelf: FD-243 |
| 307 | Charpoy double bunk : FD-112 |
| 308 | Desk 4\" 6\": FD-107 |
| 309 | Rack side 3 / 4 spaces steel: FD-1023/97(M) |
| 310 | Cot double dunk : GE/RD/103 |
| 311 | Cot double dunk : GE/RD/99 |
| 312 | Locker large steel 2 Unit for OTM Single sailor: GE/RD/106 |
| 313 | M & L for preparation of old painted french polished wooden furniture by scrapping the old tane shade polish, dirt stains on arms, outer surfaces of the item with emery paper or paper machine.The uneven surfaces to be filled with Bee-wax and apply hi gloss french polish with spray machine to get the glossy look |
| 314 | Sofa set 5 seater: FD- 258 |
| 315 | Sofa set 4 seater: FD- 258 |
| 316 | Sofa single seater: FD- 272 |
| 317 | Table centre 600 mm dia (malamine top): FD- 134 |
| 318 | Trestle store room wooden: FD- 86 |
| 319 | Table 2\"x2\": FD- 95 |
| 320 | Table with PLS Top 5\"x2\"-10\"\": FD- 289 |
| 321 | Table dining 6pers (KD type): FD- 269 |
| 322 | Table with PLS Top 3\"x3\": FD- 291 |
| 323 | Table with marble top (3\"x2\"6\"x 2\"6\") : FD- 300 |
| 324 | Table with marble top (4\"x2\"x 2\"6\"): FD- 299 |
| 325 | Table pantry with drawer : FD- 295 |
| 326 | Table Cook: FD- 297 |
| 327 | Workshop bench 1800 / 1500 x900x760 : FD- 145 |
| 328 | Table wooden 5\"x2\"10\": FD- 296 |
| 329 | Table 10\"x4\"x2\"6\": FD- 298 |
| 330 | Table 3\"x2\" with drawer: FD- 283 |
| 331 | Table 3\"x2\" : FD- 55 |
| 332 | Table 3\"x2\" with marble top: FD- 291 |
| 333 | Side Board large: FD- 26 |
| 334 | Locker bedside wooden : FD- 222 |
| 335 | Almirah mess utensil: FD- 93 |
| 336 | Almirah large wooden with shelves: DB-4116 |
| 337 | Almirah medium wooden with shelves:DB-3959 |
| 338 | Almirah medium wooden galzed: DB-4222 |
| 339 | Almirah large wooden 1/2 H x 1/2 S: DB-4049 |
| 340 | Almirah medium wooden 1/2 H x 1/2 S: DB-3050/3959 |
| 341 | Board notice glazed: FD-99 |
| 342 | Book case LP : F-8 |
| 343 | Desk stand lecture: FD-125 |
| 344 | Desh wooden for KG CWE(P)/V/SK01 (DHC): CWE(P)/SK-01 |
| 345 | Chair Wooden for KG CWE(P)/V/SK02 (DHC): CWE(P)/SK-02 |
| 346 | Desk and Bench (NSB): SKT-01 |
| 347 | Desk and Bench (NSB): SKT-02 |
| 348 | Desk and Bench (NSB): SKT-03 |
| 349 | Table for HAVs and ORs: FD-223 |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
