|
| 1 | DismantlingPlain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | M & L for Pre-painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 4 | M & L for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 all as specified complete all as specified and directed. |
| 5 | M & L for 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valleyutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275fixed with self tapping screws as specified complete all as specified and directed. |
| 6 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 7 | M & L 6mm thick Asbestos cement one piece plain angular ridge fixed with L-type or J-type or cranked hook bolts complete all as specified and directed. |
| 8 | M & L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed. |
| 9 | Dismantling Polycarbonate sheet/Fibre glass reinforced translucent corrugated sheeting in roof/wall coverings complete all as specified and directed. |
| 10 | S & F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 11 | S & F 2mm thick polycarbonate sheet fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 12 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any thickness complete all as specified and directed. |
| 13 | M & L for false ceiling made out of E-board classic of size 595 x 595 x 4 mm thick, (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as specified and directed. |
| 14 | Dismantling of false ceiling gridany typeincluding cover fillets complete all as specified and directed. |
| 15 | M & L for GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/ccomplete all as specified and directed. |
| 16 | Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of)etcin all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified and directed. |
| 17 | M & L screed laid 15mm thick in cement mortar (1:4) as in roofover green concrete surface finished even and smoothusing Lequid WPC complete all as specified and directed.Note :- Liquid WPC will be measured and paid seperately. |
| 18 | M & L for providing cement concrete intype B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in roof padding,laid to(consolidated thickness 65mm or less) as leveling course, laid and compacted inmin slope 1:30 over roof complete all as specified and directed. |
| 19 | M & L for roof treatment using APP based polymeric membrane minimum weighing not less than 3kg/sqm black finish reinforced with non woven polyster matt with thermo finish (wt. not less than 150 gms/sqm) laid over compatible bitumen primer @0 .30 liters per sqm and bitumen 85/25 @ 1.20 Kg per Sqm with help of torching with a proplyne or a butane gas using torch with minimum overlap of 75mm at side and 100mm at ends and sealing including applying a coat of bitumen primer & bitumen 85/25 applied hot all as per manufacturer instructuions. For parapet in a groove (No separate payment will be made and measurement will be done for horizontal surfaces) including applying a coat of heat repallant bitumen aluminium paint @ 0 .1 liter per Sqm on topof treated surface of roof complete all as specified and directed. |
| 20 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified and directed. |
| 21 | M & L brick work sub class \"B\" bricks(OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 22 | M & L brick work sub class \"B\" bricks , (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 23 | M & L for PCC 1:3:6 type C1 (using 20 mm gradded stone agg )as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, drain channels, copings,parapetscopings,water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. |
| 24 | S & F in repair viterous china counter top basin 450 x 525 x 195 mm shape oval including 32mm CP waste soupling & PVC flexible waste pipe of 90 cm long complete all as specified and directed. |
| 25 | S & F in repair viterous china wash down water closet pan (Pedestral pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-aypohonage pipe etc with & including WC seat cover cloured closed pattern with flat bottom and cover, CP jet nozzle, viterous china symphonic action type twin flush flushing cistern of 10ltrs capacity with lid, necessary fittings complete all as specified and directed. |
| 26 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. |
| 27 | M & L rendering 10mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified. |
| 28 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick masonary or concrete surfces of walls, mixed with water proofing admixute (ISI marked), finished even and smooth without using extra cement complete all as specified and directed.Note: Supply only water proofing admixture shall be measured and paid for separately. |
| 29 | M & L for rendering 15mm thick in cement mortar (1:4) on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound complete all as specified and directed.Note: Supply only water proofing admixture shall be measured and paid for separately. |
| 30 | M & L rendering 5mm thick in cement mortar (1:3) on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 31 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 32 | M & L for preparation of new plastered surfaces of walls and applying one coat of Oil bounddistemper overa coat of 1mm thick wall care putty of approved tint complete all as specified and directed. |
| 33 | M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 34 | M & L for preparation of newly plastered surface of walls & applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed.NOTE: Camouflage/ plain pattern decided by the Engr-in-Charge. |
| 35 | M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 36 | M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed. |
| 37 | M & L for preparation of newly plastered/unplasteredsurfaces of ceilings & applying two coats of oil bound distemper (OBD)complete all as specified and directed. |
| 38 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadscomplete all as specified and directed. |
| 39 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfacescomplete all as specified and directed. |
| 40 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each, removing from the site including cutting holes required fortaking out existing hold fast etc complete all as specified and as directed. |
| 41 | M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam sheet instead of wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 42 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 43 | S & F stainless steelhinges 100mm long medium weightto pressed steel/angle iron frames by welding/screws complete all as specified and directed. |
| 44 | S & F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked complete as specified and directed. |
| 45 | S & F extruded aluminium alloy handles 150mm size fabricated type anodised ISI marked complete as specified and directed. |
| 46 | S & F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C complete all as specified and directed. |
| 47 | Dismantling floor , hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 48 | M & L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed. |
| 49 | M & L Glazed ceramic coloured tiles in vertical surface450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 50 | M & L for 18/19mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed cement mortar (1:6) complete all as specified and directed. |
| 51 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete all as specified and directed. |
| 52 | M & L for 25 thick cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as inlevelling coarse for tiles complete all as specified and directed. |
| 53 | M & Lfor 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 54 | M & L for Providing and laying prepolishedcement concrete Chequered tiles 30cm X 30cm X 25mm thick, with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape heavy duty , set,jointed and pointed in neat cement slurry in floorsover screed bed 15mm thick (1:6) cement mortar complete all as specified and directed. |
| 55 | M & L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 56 | M & L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed. |
| 57 | M & L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed. |
| 58 | Dismantling of cement concrete (un-reinforced) kerb stone and the like of any description of and in any position not otherwise specially provided for complete all as specified and directed. |
| 59 | M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 60 | Demolition/Removal of existing RCC water tanks including cover (capacity not exc 1000 Ltrs) placed on the roof of the Bldgs/ Qtrs including removal of their staging/ platform complete all as specified and directed.Note: (i)Tank/staging shall be taken down after demolition in small pieces.(ii) Demolition shall be carried out careefully without damaging roof treatment.(iii)Roof treatment came out/damaged during demolition shall be made good with same specification without any extra cost.(iv)Small trees/ bushes/ plantation near the tank shall be uprooted and roof treatment shall be made good. |
| 61 | M & L brick work sub class \"B\" brick work placed on roof of the Bldgs/Qtrs for water tank platform with Sub-class bricks (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 62 | S & F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified in SSR Part-I complete all as specified and directed. |
| 63 | All as per Item No 62.00 here-in-above but tank capacirty of tank 1000 ltrs complete all as specified and directed. |
| 64 | S & F Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 15/20mm dia (minimum weight 142/210 gms) complete all as specified and directed. |
| 65 | Dismantlingtimber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 66 | M & L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 67 | M & L for painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces complete all as specified and directed. |
| 68 | Dismantling of posts or struts ( wood, steel or RCC ) any section including taking out embedded portion in concrete, brick work or masonary and making good disturbed portion complete all as specified and directed. |
| 69 | M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement compete all as specified and directed. |
| 70 | S & F in repair plastic net fencing of mesh size not exc 32 x 32 mm and thickness not less than 4mm fixed to steel or wooden posts as per manufacturers instructions complete all as specified and directed. |
| 71 | S & F in repair retro reflective sign board made of high intensity retro reflective sheeting pasted on both sides of 3 mm thick ACP sheet with letters/graphics to be overlayed high intensity retro reflective sheeting of Make 3M/Avery dension as approved by IRC/MORTH duly plotted cut of approved colour fixed with SS frame work complete all as specified and directed. Note: SS Frame work will be measured and paid seperately. |
| 72 | Excavating in post holes in soft/ loose soils(or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 73 | M & L for PCC type C-2 (1:3:6) (using 40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified and directed.Charge. |
| 74 | S & F in repair for 18/19mm thick High Density High Moisture Resistant board (HDHMR) Prelaminated both sides as in Controller\"s Desk ,palmed boxes,showcase,shutters of Cup Boards etc including 6mm designing teak wood beading on edges complete all as specified anddirected. |
| 75 | S & F 75mm extruded brass handles, fabricated type polished complete all as specified and directed. |
| 76 | S & F Width of flaps (when open) 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 77 | S & F fast DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for for Wadrobe, cupboard and Almirah Door (SS MAT) with mounting Screw complete all as specified and directed. |
| 78 | M & L for preparation of old painted surfaces of wood and wood based materials of any dscription over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.Note: The rate quoted by tenderer is deemed to included in item for painting any type of bldgs for married /OTM accn, stores, all type of fencing/ gates/ concetina coil angle including any height and width at AF Stn Sarsawa shall be made good by the contractor without any extra cost to the Govt. |
| 79 | M & L for preparation of old painted wooden surfaces of any description n. exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified and directed.Note: The rate quoted by tenderer is deemed to included in item for painting any type of bldgs for married /OTM accn, stores, all type of fencing/ gates/ concetina coil angle including any height and width at AF Stn Sarsawa shall be made good by the contractor without any extra cost to the Govt. |
| 80 | M & L for preparation of old painted steel, galvanised sheet and iron surfaces of any description over 10 cmwidth or girth and applying one coat of synthetic enamel paint in camouflauge pattern or plian or pattern decided by Engr-in-Charge complete all as specified and directed.Note: The rate quoted by tenderer is deemed to included in item for painting any type of bldgs for married /OTM accn, stores, all type of fencing/ gates/ concetina coil angle including any height and width at AF Stn Sarsawa shall be made good by the contractor without any extra cost to the Govt. |
| 81 | M & L for preparation of old steel, galvanised sheet and iron surfaces of any description n. exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified and directed.Note: The rate quoted by tenderer is deemed to included in item for painting any type of bldgs for married /OTM accn, stores, all type of fencing/ gates/ concetina coil angle including any height and width at AF Stn Sarsawa shall be made good by the contractor without any extra cost to the Govt. |
| 82 | M & L for preparation of old/newly painted RCC posts and cement surfaces any description over 10 cmwidth or girth and applying one coat of synthetic enamel paint in camouflauge pattern or plian or pattern decided by Engr-in-Charge complete all as specified and directed.Note: The rate quoted by tenderer is deemed to included in item for painting any type of bldgs for married /OTM accn, stores, all type of fencing/ gates, angle including any height and width at AF Stn Sarsawa shall be made good by the contractor without any extra cost to the Govt. |
| 83 | M & L for preparation of old/newly painted RCC posts and cement surfaces any description n. exc 10 cm in width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified and directed.Note: The rate quoted by tenderer is deemed to included in item for painting any type of bldgs for married /OTM accn, stores, all type of fencing/ gates, angle including any height and width at AF Stn Sarsawa shall be made good by the contractor without any extra cost to the Govt. |
| 84 | M & L for preparation of old PAINTING BRICK, STONE, CONCRETE, ASBESTOS CEMENT SHEET OR PLASTER SURFACES of any description over 10cm girth or width not otherwise described and applying one coat of plastic emulsion paint (exterior grade) complete all as specified and directed. |
| 85 | S & F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290) complete all as specified and directed. |
| 86 | S & F mild steel round bars as in tie bars of 10 mm dia and over, fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete all as specified and directed.Note: Cost of cutting to length, bent to shape rquired & binding with MS wire is included in above rate. |
| 87 | S & F for Mild steel screw boltsdia of Neck 5mm to 10mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long complete all as specified and directed. |
| 88 | Dismantling structural steel work including door /gate , frame ,trusses complete all as specified and directed. |
| 89 | M & L compound girdersand stachions, lattice giders, aerial masts, stair,gate,frame work , staging for water tanks and the like including caps, bases, splices etc channel sections or angles with plates, including all lattice bars, stiffeners, gussets plates, etc.Fe- 290 (Gde E-165) quality \"A\" complete all as specified and directed. |
| 90 | S & F Rolled mild steel Framed work as in doors or gates of angle or other section confirming to Fe-410-Swith gusset plate , rails braces etc. complete drilled for fixing of steel sheeting or othercoveringdoor etc to be prepared for hanging or slinding with and including either hooks hinges and rollers for slinding gates, guide rail of MS flat and framing required for fixing of rollers, pintle hinges, locking arrangement as required and hanging also fastening and fixing complete using Fe- 290 (Gde E-165) quality \"A\" complete all as specified and directed. |
| 91 | Dismantling of fencing wire mesh,any type complete all as specified and directed. |
| 92 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 93 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire complete all as specified and directed. |
| 94 | Restraining & resecuringthe old chain link fencing including making good stable etc complete all as specified and directed. |
| 95 | S & F in repairGalvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 96 | Restraining & resecuringthe old Galvanised. 2 strand, steel barbed wire 2.24mm dia barbedincluding making good stable etc complete all as specified and directed. |
| 97 | S & F in repair Punched tape concertina coil 600/1000mm dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed. |
| 98 | M & L for preparation of old plastered surfaces of wall & applying one coat of external emulsion paint complete all as specified and directed.Note: Camouflague pattern/Plainor pattern decided by engr-in Charge /Air force Authority. |
