|
| 1 | Taking down shutter of any description exceeding 1 Square Metre and not exceeding 2 Square Metre each complete all as specified and directed. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc complete all as specified and directed. |
| 3 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre and not exceeding 04 Square Metre each , removing from the site including cutting holes required fortaking out existing hold fast etc. complete all as specified and directed. |
| 4 | M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam sheet instead ofwood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 5 | S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam both side PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, stile & rails feathered at edges, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 6 | M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 7 | S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 8 | S & F 35mm thick IInd class hard wood panelled door shutterwith lock rail and panelof 9mmBWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified and directed. |
| 9 | S & F 35 mm thick IInd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 10 | M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 11 | M & L for preparing of newuntreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer complete all as specified and directed. |
| 12 | M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/wallsin PCC (1:2:4) type B-0 to match the existing floors/walls complete all as specified and directed. |
| 13 | M & L forclamps , hold fasts; wall ties, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts plate washers and similar small articles conforming to Fe-290 Gde-E-165 ® complete all as specified and directed. |
| 14 | S & F IInd class hard wood plain solid straight chowkat and frame wrought framed rebatted on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed. |
| 15 | S & F stainless steelhinges 100mm long medium weightto pressed steel/angle iron frames by welding/screws complete all as specified and directed. |
| 16 | S & F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed. |
| 17 | S & F aluminium anodised barrel tower bolt 200mm size extruded section, ISI marked & fixed complete all as specified and directed. |
| 18 | S & F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked complete all as specified and directed. |
| 19 | S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp ,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 20 | S & F anodized aluminium frame with power coating (minimumthickness 50 micron) and other sections for doors, windows, ventilators, partitions,with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 21 | S & F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, with power coating (minimumthickness 50 micron)including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc complete all as specified and directed. |
| 22 | S & F door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed complete all as specified and directed. |
| 23 | S & F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimumthickness 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified and directed. |
| 24 | Supply only 5mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed. |
| 25 | Supply only 5mm thick Froasted glass in squares n exc 0.5 sq. m each pane complete all as specified and directed. |
| 26 | Supply only5mm thickTinted Coloured glass fixed to metal frame complete all as specified and directed. |
| 27 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & screwed complete all as specified and directed. |
| 28 | S & F anodized aluminium grill with power coating (minimumthickness 50 micron) of approved pattern and fixed to the existing window/ventilatorframe with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening sizefor fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as specified and directed. |
| 29 | S & FFactory made steel windows,box type,any size[ (XW2)M/F] double shutter, one openable shutter with galzing bars and other openable shutter without glazing bars, fabricated with members of standard sizes as shown on drawings including frames complete all as shown specified on drg no-(Drg No. CE(AF) WAC Palam Delhi Drg No -CEAF/STD-184-2012 complete all as specified and directed.Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth,Grills, wire cloth, sheet glass,iron mongry and guard bars as shown on drg andapplying Two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 30 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 31 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed. |
| 32 | M & L for3mm thick froasted glass and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed. |
| 33 | S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed |
| 34 | S & F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C complete all as specified and directed. |
| 35 | S & F in repairs door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width aand weight between 36 to 60 Kg and fixed complete all as specified and directed. |
| 36 | S & F in repairfor double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existingsurfaces complete all as specified and directed. |
| 37 | S & F in repairs brass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and directed. |
| 38 | S & F in repairof venation blinds( super quality) to window openings complete all as specified and directed. |
| 39 | S & F in repairplastic net fencing of mesh size not exc 32 x 32 mm and thickness not less than 4mm fixed to steel or wooden posts as per manufacturers instructions complete all as specified and directed. |
| 40 | S & F in repairs stainless steel Kitchen plate rack of overall minimum size 750mm x 750mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws complete all as specified and directed.Note : Weight of rack shall not be less than 4.00 Kg. |
| 41 | S & F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 900mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws complete all as specified and directed.Note : Weight of rack shall not be less than 6.00 Kg. |
| 42 | Taking down carefully anodized aluminium/NCL/Bombay Slindingdoors/ windows/ ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified and directed.Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleats, aluminium beadings, glazing clips, rubbers packing,slinding rollers, stays including cutting of old styles etc & adjusting the same appropriately as directed.(ii) New aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately.(iii) New Glazing shall be measured and paid separately but payment supply only items (iv) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º. |
| 43 | S& F in repairNCL locks including all fixtures complete all as specified and directed. |
| 44 | Repairs to Steel window/ventilator any type & any size by taking down Shutter, replacing defective hinge,handle & locking arrangement including necessary welding(if any) and resecuringfixed to frame complete all as specified and directed. |
| 45 | Resecuring or easing & adjusting, without taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed. |
| 46 | S & F in repair 150mm long aluminum anodised handle all as per IS complete all as specified and directed. |
| 47 | S & F in repair 200mm long aluminum anodised Pull handle all as per IS complete all as specified and directed. |
| 48 | S & F in repairs 150mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 49 | S & F in repairs 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 50 | S & F in repair 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 51 | S & F in repair stainless steelhinges 100mm long medium weightto pressed steel/angle iron frames by welding/screws complete all as specified and directed. |
| 52 | S & F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed. |
| 53 | S & F in repair DOOR SEAL BOTTOM, DOOR AIR GAP RUBBER SHIELD (Best Quality) Anti Rust , Brown/white/balck colour, Black Rubber complete all as specified and directed. |
| 54 | S & F in repairFAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for for Wadrobe, Cupboard and Almirah Door. (SS MAT)with Mounting screw complete all as specified and directed. |
| 55 | S & F in repair anodized aluminium grill with power coating (minimumthickness 50 micron) of approved pattern and fixed to the existing window/ventilatorframe with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening sizefor fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement complete all as specified and directed. |
| 56 | S & F in repairoil putty best Quality for used existing window glass complete all as specified and directed. |
| 57 | M & L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces complete all as specified and directed. |
| 58 | Dismentling floor, hearth or wall tiling incl cement mortar bedding (but ot backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 59 | M & L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed cement mortar (1:6) complete all as specified and directed. |
