Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #53265244

Tender For Additional / Alternator And Replacement Of Steel Window In Offers Md Accommodation At Certain Blocks In Circle At Dssc Wellington

Issued by Statutory Bodies & Commissions/Committees · wellington, Tamil Nadu
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
24 Jan 2026
0 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
wellington → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Additional / Alternator And Replacement Of Steel Window In Offers Md Accommodation At Certain Blocks In Circle At Dssc Wellington

BOQ

Name of work : ADDN/ ALTN AND REPLACEMENT OF STEEL WINDOW IN OFFRS MD ACCN AT CERTAIN BLOCKS IN CIRCLE AT DSSC WELLINGTON
Sl. No. Item Description
1Taking down door/ window chowkats orframe with shutter (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specifiedand as directed.
2Taking downdoor/window chowkats or frame with shutter (without taking off shutters from the frames) exc. 1.5 Sqm & n. exc. 4.00 Sqm each.
3Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed
4Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar
5Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slabin single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter topin steps, jambs, pillars, window-cills,etc, including cutting, polishing and rounding to edges of stone slabsetc., complete all as specified and as directed.
6Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels withlocking system) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.00 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook , zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,incl Glazing shall be provided with 4.8mm thick Plain / frosted glass fixed with appropriate size beading as per manufacurer\"s specificationsandStainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter, complete all as specified and directed by Engineer-in-Charge. complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. ® PER SQUARE METRE S & F Material only
7Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimensioncomprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsizefor fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.Glazing shall be provided with 4.8mm thick Plain / frosted glass fixed with appropriate size beading as per manufacurer\"s specificationsNote: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
8Providing and fixing factory made uPVC white colour fixed window/ventilatorof area exc 1.00sqmbut not exc 2.00sqm made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastenersincl glazing shall be provided with 4.8mm thick Plain / frosted glass fixed with appropriate size beading as per manufacurer\"s specifications
9M&L for usingCement mortar 1:4Forming jambs and soffits etc. to openings (to foregoing item),including cutting, toothingand properly bonding into old work, also facing, jointing and pointing to match existing work, complete
10M & L for PCC (1:3:6) type C-1 (using20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks,etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
11S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading s specified and as directed.
12M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165
13Material and labour for Aluminium designer powder coated decorative curtain rods (Drapery rods) 20mm dia, exterior grade 3mm thickwith and including side caps, holding clamps and \"F\" and \"L\" brackets,fixed to wall with PVCrawl plug and brass screws etc., complete all as specified and as directed.
14M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete as specified and as directed.
15M&L for use & waste of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. to flat rough finished surfaces of concrete square or rectangle complete as specified and as directed.
16S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and as directed.
17M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m meanradius built in CM 1:6
18M&LPrecast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete.
19Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.
20M&L for 15 mm thick rendering in cement mortar 1:4on brick work or block masonry surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed.Note: WPC shall be measured and paid seperatly.
21Supply only liquidwater proofing compound of approved makecomplete all as specified and as directed.
22Material and labour for Rendering in Cement Mortar 1:6, 15mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.(Internal surface)
23M/L preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxideall as specified and as directed.(Internal surface)
24M/L Preparing old steel surfaces girth exc. 10 cm girth and applying one coat of synthetic enamel paint all as specified and as directed.(Internal surface)
25M&L for preparation of new surfaces of walls and applying with whiteputty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc andapplying two coats ofOil bounddistermper over a coat of alkali resistant priming paint primerby approved applicator of the manufacturer of the paint and all as specified and as approved.
26M&L Preparing newly plastered surfaces of external walls andfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
27M&L for complete removal of existing treatment on surfaces of wall and applying with whiteputty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc andapplying two coats of Oil bounddistermper over a coat of alkali resistant priming paint primerby approved applicator of the manufacturer of the paint and all as specified and as approved
28Complete removal of existing treatment on external wallsby wire brushing, crack filling & Bio-wash to fight microbial growth and for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as per manufacturer instruction as directed

AI Tender Summary

OUR REF NO 53265244
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.50 Lakhs
LAST DATE 24-01-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Additional / Alternator And Replacement Of Steel Window In Offers Md Accommodation At Certain Blocks In Circle At Dssc Wellington
Basic Detail
Tender No 8516/E8
Bidding Type Tender
Location
City wellington
State Tamil Nadu
Key Dates
Publish Date 03 Jan 2026
Submission Date 24 Jan 2026
Open Date 31 Jan 2026
Finance
Tender Value 43.50 Lakhs
Tender Fee 500
EMD 87000
Exemption Available
Document List
145f1d17-6f35-4dbc-b991-a92884adb732.html
8516TENDER.pdf
BOQ_836565.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 31, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

145f1d17-6f35-4dbc-b991-a92884adb732.html

pdf

8516TENDER.pdf

xls

BOQ_836565.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender