|
| 1 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. all as specified and directed |
| 2 | M/L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen)VG -10 @ 5 Kg per 10 Sqm on existing black top surface all as specified. |
| 3 | M&LforBituminous premixed carpet, 3cm consolidated thickness,with 0.27 cu.m. of stone chippings mixed with 14.6 kg of binder, rolled and compacted to required camber and gradient |
| 4 | M & L for Premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen, applied and rolled to auniformsmooth surface |
| 5 | M/L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen)VG -10 @ 10 Kg per 10 Sqm on unsurfaced water bound macadam incl preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. all as specified. |
| 6 | M & L for premix bituminous macadam laid/ rolled and compactedto required gradient and camber with Paving bitumen VG-30 content of 4% by weight of total mix (consolidated thickness 75 mm or less) for correction of undulation / camber. |
| 7 | M & L for layinghot applied thermoplastic compound (paint) 2.5 mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc. required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No. 803 as per IRC. Painting lines, dashes, arrows, letters etc. on roads, pavements and the like exc. 10 cm wide with road marking paint, white or golden yellow all as specified. |
| 8 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 9 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 10 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 11 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete. |
| 12 | M&L for 75 mm thick PCC 1:4:8 Type D-2 using 40mm graded stone agg.complete all as specified |
| 13 | Providing and laying 80mm thick factory made chamfered edge cement concretepaver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over and including 50mmthick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete |
| 14 | M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coppingall as specified and directed. |
| 15 | Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 16 | M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 (20mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specfied. |
| 17 | Taking down cement plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m Complete all as specified and directed. |
| 18 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 incuding addition thickness is provided as floating/settng coat complete all as specifiedand directed. |
| 19 | M & L two coat of Synthetic enamel painting on brick, stone, concrete, asbestos cement or plaster surfaces over Priming paints plaster coats incl preparation of New or previously Untreated Surfaces of any description over 10cm girth or width, not otherwise described,complete all as specified & directed. |
