Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M & L Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/disintegrated rock, complete all specified and directed by Engr-in-Charge. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on planand n exc 1.5 m in depth and getting out soft/Disintegrtated rock complete all as specified. |
| 3 | Removing excavated material to distance not exc50 metre and depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge |
| 4 | Returning, filling in, including spreading, levelling,watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified. |
| 5 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified. |
| 6 | M&L for providing reinforced cement concrete 1:2:4 nominal mix using 20 mm graded stone aggregates as infoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. |
| 7 | Use and removal of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits [if any] of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed. |
| 8 | M&L for providing reinforced cement concrete 1:2:4 nominal mix using 20 mm graded stone aggregates as inColumns, pillars, piers, posts and struts complete all as specified. |
| 9 | Use and removal of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for rough finished surfaces of concrete complete all as specified and as directed. |
| 10 | M&L for providing reinforced cement concrete 1:2:4 nominal mix using 20 mm graded stone aggregates as in Beams, cantilevers, bressummers, lintel over 1.5 span complete all as specified. |
| 11 | Use and removal of steel formwork to sides and soffits of floor or roof beams, beam launchings, girders, bressummers, lintels,cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for rough finished surfaces of concrete complete all as specified and as directed. |
| 12 | M&L for providing reinforced cement concrete 1:2:4 nominal mix using 20 mm graded stone aggregates as inSlabs supported on walls,beams and columns in floors,roofs, complete all as specified. |
| 13 | Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed. |
| 14 | M&L for providing reinforced cement concrete 1:2:4 nominal mix using 20 mm graded stone aggregates as in Chajjas complete all as specified. |
| 15 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 16 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 6 mm to 8 mm, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 17 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 18 | S & F GI wire cloth / mesh with2 mm dia of wire, average aperture not exceeding 10mm and fixed with tinned tacks or stainless steel wire staples as in lateral reinforcement for concrete, wall, panels/ modules all as per manufacturer\"s instructions, as specified and as directed. |
| 19 | M & L modular bricks in cement mortar 1:6 with Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in etc complete all as spd and directed. |
| 20 | M & L modular bricks in cement mortar 1:4 with Brickwork with flyash bricks, straight or curved on plan to any radius i n half brick thick walls,built in etc complete all as spd and directed. |
| 21 | M&L for rendering 15 mm thick in cement mortar (1:6) onbrick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified. |
| 22 | M & L for rendering 5mm thick in cement mortar 1:4 including mixing water proofing compound as per manufacurers instructions over a backing coat of 10mm thick in CM 1:4 on concrete or brick masonry surfacesand finishing the top surface even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compoundwill be measured and paid separately. |
| 23 | Supply only integral water proofing compoundof approved make |
| 24 | M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 25 | M & Lpreparation of newly plastered surfaces of wall and applying two coats ofOBD over a coat of primer including preparation ofsurfaces on walls as specified and directed. |
| 26 | M&L for Non - skid (joint free) coloured Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting including screed bed or bedding lasyer of mortar 15 mm thick in cement mortar 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 27 | M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortarfor laying floor finishes in CM 1:6 |
| 28 | Glazed ceramic coloured tiles, 7mm thick (square/ rectangular) area of each tile exc. 0.15 Sq.m but n. exc. 0.20 Sq.m,on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurryover and including 10mm thick rendering in cement mortar (1:4) rendering and joints pointed with grout of matchnig shade of tile, complete all as specified.Note: The colour / shade / design of tiles shall be as approved by GE. |
| 29 | M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms , platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab&pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half moulding of granite edgescomplete all as specified and directed. |
| 30 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4)for bedding of tilescomplete all as specified. |
| 31 | M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding15 cm thick watered and rolled/rammed to a true surface complete all as specified. |
| 32 | M & L for 75 mm thick, PCC 1:3:6, Type C-1, using 20mm graded stone aggregate as in plinth protection, surfaces finished even and smooth complete all as specified and as directed. |
| 33 | M & L for 100 mm thick, PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in sub floor, floor ect, surfaces finished even and smooth complete all as specified and as directed. |
| 34 | M & L for 25 mm thick, PCC 1:2:4, Type B-1, using 20mm graded stone aggregate as in floor, surfaces finished even and smooth complete all as specified and as directed. |
| 35 | S & F GI water tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. |
| 36 | Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed. |
| 37 | S & F GI water tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. |
| 38 | S & F GI water tubing of 25 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. |
| 39 | S & FStop Valves/angle valves, 15 mm dia, cast copper alloy with capstan head, fancy type Chromium Plated, Fancy Type, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc complete all as specified and as directed. |
| 40 | S & F fancy type Bib Taps, Long Body, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Typewith crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as per Jaquar Catalogue No. CON-107KN or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 41 | S & FVitreous China Wash Down Water Closet [Pedestal pattern], White, including 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of lowor high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMTcheck nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and \"P\" or \"S\" trap complete all as specified and as directed. |
| 42 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. |
| 43 | S&FCentre hole basinmixture with hot or cold mountedtap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts fancy type screwed for iron pipe, complete all as directed by EIC. |
| 44 | S&F in repairs concealed stop cock type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 45 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and cement concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 46 | S & FVitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed for iron pipe and fixed, 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed. |
| 47 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm sizein square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 48 | S & F PTMT Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges, fixed with and including Chromium plated brass screws and wooden/plastic cleats [Minimum weight 190 Grams] complete all as specified and as directed. |
| 49 | S & Fchromium plated , Stainless steel Soap Dish with screws complete all as specified and as directed. |
| 50 | S & Fchromium plated , Stainless steel grating of Dia 110 mm fixed with white cement/Grout withcomplete all as specified and as directed. |
| 51 | S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directedMake -Jaquar , Cat Part-No - 563 |
| 52 | S & F in repair CP paper holderof Make-AKP-35751P of Jaquar or equvelent in kohler. complete all as specified and directed. |
| 53 | S & F in repair , PVC connections 15mm size with PTMT nuts of length 450mm and fixed all as specified and as directed. |
| 54 | S & F in repair corner glass shelf set of 3 Nos with bracketof Make-CAN-1173 of Jaquar or equvelent. complete all as specified and directed. |
| 55 | S&F for Vitreous China Urinal, Half stall type, white including waste pipe and water splinder, etc complete all as specifed and directed. |
| 56 | S&F in vitreous china colouredurinal with backside inlet for water including Sensor Concealed Type Flushing Valve for Urinal Complete Set with Installation Box with Control Cock (Battery Operated)completed( Cat part URS-WHT-13253Oand SNR-STL-51087 of Jaquar or Equivalent ) |
| 57 | SF in repair 6-8 mm thick toughened glass wall mounted urinal partition of area exc. 0.30 sqm but n.exc 0.50 sqmincluding brackets , nuts and cutting hole if required. Complete all as specified and directed by engineer in charge. |
| 58 | S & F Rotational Moulded Polythene [HDPE] Water Tanks, Triple Layered, ISI Marked, Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed. |
| 59 | S & F Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe [Minimum Weight 25mm - 455 Grams] etc complete all as specified and as directed. |
| 60 | S & F Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. |
| 61 | S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 62 | S & F 75mm outlet PVC [SWR] Floor trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 63 | S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps complete all as specified and as directed. |
| 64 | S & F 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 65 | S & F 75 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 66 | S & F 110mm bore PVC [SWR] Gully Trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 67 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately) |
| 68 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.ccomplete all as specified and as directed . |
| 69 | S & F 100 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished including fixtures complete all as specified and as directed. |
| 70 | S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 125 mm long complete all as specified and as directed. |
| 71 | S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed. |
| 72 | Supply and fix 4.80/5.00 mm thick Sheet pin headed figuredGlass ordinary quality in squares exceeding n.exc 0.5 Sq.m in each pane complete all as specified and as directed. |
| 73 | S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 250 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 74 | S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed. |
| 75 | S & F Floor Door Stopper of size 100mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed. |
| 76 | M & L for providing pre construction anti termite treatment for the backfill in contact with foundation by applying emulsion at the rate of 7.5 litres per square metre of vertical surface [Area of the substructure in contact with back fill] complete all as specified and as directed. |
| 77 | M & L for providing pre construction anti termite treatment for the top surface of filled earth by applying emulsion at the rate of 5 litres per square metre ofsurface complete all as specified and as directed. |
| 78 | M & L for providing pre construction anti termite treatment for the soil under plinth protection by applying emulsion at the rate of 5 litres per square metre of surfacearea complete all as specified and as directed. |
| 79 | S & Fixing5 mm thick bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood including cutting holesif required and fixed to wooden plugs with CPbrass screws and cup washers complete all as specified and directed. |
| 80 | S & F in repair , PVC connections 15mm size with PTMT nuts of length 450mm and fixed all as specified and as directed. |
| 81 | S&F powder coated anodized aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 82 | M&L POP false ceiling including anchor angle ceiling angle perimeter angle and intermediate angle with wire mesh and all as specified and directed Note Design will decided be GE. |
| 83 | M&L for providing for frameless glazing door including all fitting of shutter i.e handle, lock hinges etc with laminated toughened glass fitted with stainless steel spider fittings (2way/4way) splice plate, fin plate routel and stainless steel fastener etc with 12 mm thick glass support finish complete all as specified and directed. |
| 84 | M&L for 75 mm thick cement concrete type D-2 1:4:8with )using 40 mm graded stone aggregates) asin sub base of flooring etc Complete all as specified and directed. |
| 85 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved, design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand etc Complete all as specified and directed |
| 86 | M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping ,kneeles, bed plates,apex stones,benching, gola, slightly rounded and similar items complete all as specified and as directed. |
| 87 | S & F 150mm bore Reinforced concrete pipes, class NP 2 with one collar per length of pipe. |
| 88 | M & L Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregates, as in concrete bed to RCC drain pipes in any depth including packing under and haunching against the sides of pipes 150mm bore after the pipes are laid, jointed and tested all as specified.Note : Drain pipes shall be measured and paid separately. |
| 89 | M & L Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates as in foundation, filling and mass concrete etc. complete all as specified. |
| 90 | M & L Brick work with sub class ‘B’ bricks, old size straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar 1:4 including corbelling and arches where shown on drawings including raking out joints of internal surfaces and pointed flush on external surfaces as the work proceeds complete all as specified. |
| 91 | M&L cement 1:2:4, type B2, using 40mm aggregate in surface channel and drains, benching and similar work etc. as specified and directed. |
| 92 | Extra for forming fair finished drain or channel 30cm internal girth in cement concrete using extra cement including forms, moulds/mitred, stopped ends etc. |
| 93 | M & L Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, complete all specified and directed by Engr-in-Charge. |
| 94 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on planand n exc 1.5 m in depth and getting out hard/dense soil complete all as specified. |
| 95 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as directed |
| 96 | M&L Brick work with sub class \"B\" Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 97 | M&L Brick work with sub class \"B\" Bricks, straight or curved on plan to any radius as in half brick thick wall in CM 1:4 completeall as specified and directed by Engineer - in - Charge . |
| 98 | M&L Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified. |
| 99 | M&L for water proofing treatment with APP (Atactic Polypropylene) modified polymeric prefabricated five layer membrane over roof consisting of cleaning of concrete or plaster surface of roof & parapet walls and applying evenly a bitumen primer confirming to IS 3488 @ 0.40 Kg per sqmlaid using buten torch and sealing all joints of APP modified polymeric water proofing membrane minimum weight 3.6 kg/sqm reinforced with non woven polyester fabric (weight not less than 160 grams per sqm) unrolled and bonded to substrata with logitudinal and end laps 100 mm and 150 mm respectively as per manufacturer\"s instructions complete all as specified. |
| 100 | M & L for rendering 5mm thick in cement mortar 1:4 including mixing water proofing compound as per manufacurers instructions over a backing coat of 10mm thick in CM 1:4 on concrete or brick masonry surfacesand finishing the top surface even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compoundwill be measured and paid separately. |
| 101 | M&L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform all as specified. Note :- OBD to be measured & paid saperately. |
| 102 | M&L for providing 3mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform all as specified and directed |
| 103 | M&L for preparation of newly plastered or unplastered/undecorated surfaces as of walls and applying twocoats of oil bound distemper over a coat of alkali resistant primercomplete all as specified and as directed. |
| 104 | M&L for preparation of newly plastered or unplastered/undecorated surfaces of ceiling and applying twocoats of oil bound distemper over a coat ofprimer complete all as specified and as directed. |
| 105 | M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat ofprimer complete all as specified and as directed. |
| 106 | M&L for Glazed ceramic colouredtiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified. |
| 107 | M&L 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), over cement screed base laid and jointed withgrey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishing incl complete all as specified and as directed. |
| 108 | M&L 20-25 mm thick machine kota stone slab as in skirting/dado, riser of steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 109 | S&F Factory made machine pressed Chequered cement concrete colour tiles30 cm X30 cm X22 mm thick, with grey cement andpigments, set, jointed and pointed in neat cement slurry in floorscomplete all as specified and as directed. |
| 110 | M&L 10 mm thick rendering in cement mortar (1:3) on vertical surfaces for backing of tiles etc complete all as specified. |
| 111 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:4)for bedding of tilescomplete all as specified. |
| 112 | M&L for 15 mm thick rendering in cement motar (1:4) on vertical surface for bracking of tiles etc of tilescomplete all as specified. |
| 113 | M & L for clip in type armed strong metallic powder coated 0.5mm thick ceiling with GI framework made of standard Tee , Angle or any other section as in grid type ceiling framework as approved by GE . Ceiling shall be hanged to roof trusses / purlin rafters with the help of GI wire not less than 4mm dia at an interval n. exc 1m , the size of the metallic powder coated ceiling tiles 600 mm x 600 mm complete all as specified. |
| 114 | Providing and fixing decorative PVC louvred panels on wall surface, made from extruded rigid PVC profiles of approved quality , thickness not less than 12mm, designed with verticle or horizontal slats (louvers) for asthetic wall cladding purposes, fixed to a GI/Wooden framenor directly to wall using stainless steel screws, adhesive, or mechanical fastners as per manufacturer\"s specifications, including surface prepration, edge trimming, joints finishing, and making good the disturbed surfaces. Complete all as specified and directed. |
| 115 | S&F in repair vitreous china Rimless Single Piece WC (White) With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 370x690x750 mm, S Trap- 300 mm complete all as specified and as directed.(Cat No.CNS-WHT-853S300SPPSM) of Make: Jaquar or Equivalent out of makes specified in list of makes. |
| 116 | S&F in repair vitreous chinaCounter top Wash hand basin (White) of size (570x420x195 mm) complete all as specified and as directed. (Cat No. FLS-WHT-5601) of Make: Jaquar or Equivalent out of makes specified in list of makes. |
| 117 | S&F Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15 mm nominal bore complete all as specified and as directed. (Cat No.ARI-CHR-39233NK) of Make: Jaquar or Equivalent out of makes specified in list of makes. |
| 118 | S&F 32 mm dia brass chromium plated bottle trapsfor wash basins with inlet and outletscrewed for pipe or connectionsincludingnecessary packing, unionand cap and fixed complete all as specified and as directed. |
| 119 | S&F for angular two way angle cock with wall flange, 15 mm bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified. |
| 120 | S & F for corner glass shelf set of 3 Nos with bracketof Make-CAN-1173 of Jaquar or equvelent. complete all as specified and directed. |
| 121 | S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 250 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 122 | S & F Floor Door Stopper of size 100mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed. |
| 123 | S & Fixing5 mm thick bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood including cutting holesif required and fixed to wooden plugs with CPbrass screws and cup washers complete all as specified and directed. |
| 124 | S&F powder coated coloured Anodised aluminium window and ventilator shutters (Thickness of powder coating not less than 50 micron), (double leaf glazed shutter and single leaf mosquito proof shutter), fixed/side hunge type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, tower bolt, suitable handle, locking system etc. complete all as specified. |
| 125 | S&F powder coated coloured anodized aluminum door shutters(Thickness of powder coating not less than 50 micron), aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door,100 mm longhinges (3 Nos), anodized aluminum snap beading screws etc. complete all as specified. |
| 126 | S&FStainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified. |
| 127 | S&F 5.5 mm thick black sheet glassand glazing fixed with neoprenerubber gasket in aluminium frame work complete all as specified and as directed. |
| 128 | M&L 12mm thick Prelaminated Particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber formwork. Complete all as specified. |
| 129 | S&F for aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 130 | S & F for brass mortice lock vertical type size 100mm 4 levers all as specified and directed by Engr-in-Charge |
| 131 | Supply and Fixing, SFRC manhole cover of size 600mm x 600mm x 70mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame :(a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame |
| 132 | M & L Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates as in foundation, filling and mass concrete etc. complete all as specified. |
| 133 | Cutting into existing manhole/Sewage line for connecting new drains and making good for 150mm bore pipe and rendering cutting out existing benching and forming branch (1/2 round or ¾ section) channel in plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate surface finished even and smooth and reforming benching as required complete all as specified. |
| 134 | Demolition of cement concrete (un-reinforced) of any description & in any position not specifically providedcomplete including dismantling of floor tiles etc complete all as specified. |
| 135 | M&L Cement concrete 1:3:6 Type C2 (40mm graded aggregate) as in sub base etc complete all as specified. |
| 136 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified |
| 137 | M&L for concealed point wiring with PVC insulated and unsheathed, single core FRLSH cable of size 1.5 sqmm stranded copper conductor, 1100 Volt grade, drawn into and including PVC rigid conduitnot less than 20mm dia, medium grade, ISI markedwith and including 1.5 Sqmm unsheathed green colour stranded copper conductor FRLS cable for continuous earth wire and including sunken pressed steel concealed terminal boxes of suitable size made out of 1.2 mm thick sheet covered with 2.6 mm thick white hylam sheet cover of suitable size formounting switches/sockets/fan regulators or Modular flush box for mounting modular switches/sockets/regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified & directed for the following :- |
| 138 | (a) One light/fan point controlled by one switch |
| 139 | (d) One socket outlet 2/3 pin 5 amp, multipurpose on same board with other switches |
| 140 | (c) One switch/socket outlet point 2/3 pin 5 amp multipurpose on independent board |
| 141 | All as per Item No 137 above, but with FRLS cable 2.5 sqmm stranded copper conductor for switch/socket outlet 5 Pin,15 Ampsmultipurpose controlled with 2.5 sqmm copper conductor FR cable as continuous earth wire of green colour on independent board. |
| 142 | All as per above item No-137 here in before but using 4.0 sqmm single core multi stranded copper conductor PVC insulated and unsheathed,FRLS cable for 15 Amp socket outleton independent board including 4.0 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified andas directed. |
| 143 | Supply and fix switch piano flush type, 5 amps, 230V AC,single pole, one way |
| 144 | Supply and fix,switch piano flush type 15 amps, 230V AC single pole one way |
| 145 | Supply and fix,socket out let multipurpose suitable for 2/3 pin 5 amp flush type |
| 146 | Supply and fix,socket out let 2 IN 1,multipurposesuitable for3 pin 5/15 amp flush type. |
| 147 | Supply and fix Modular Switchflush type 6 Amps single pole, one waycomplete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS |
| 148 | Supply and fix Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush typecomplete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS |
| 149 | Supply and fix Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socketcomplete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS |
| 150 | Supply and fixModularSwitch 16 Amps single pole, one waycomplete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS |
| 151 | Supply and fix angle/batton type holder insulated body in white colour |
| 152 | Supply and fix,ceiling rose,3 phase,polycorbonate isolated body forsurface type, three terminals. |
| 153 | S&F LED lamp of 7 W (B-22 Base) 6500K complete allas directed. |
| 154 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient high transmissitivity diffuser, high lumen ouput 230 volts and intregrated electronic driverconnector block etc. complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Havells Cat part No LHEXBLP7PN1W022 or its equivalent in Philips, Wipro, Bajaj |
| 155 | S & F forLED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Havells Cat Part No LHEXACP7IN1W010 or its equivalent model in Wipro, Philips. |
| 156 | Supply & fix Surface/RecessedmountedLED panel 15 w,slim,compactround LED panel of 15 W plastic body with premium diffuser to ensure glare free & even distribution of light complete. Make:- Havells/ Wipro/Phillips/Crompton/Bajaj |
| 157 | Supply and fix ofexhaust fan , steel body AC single phase230 volt of size 380 mm mmsweep complete with blade, frame and louvers all as specified and directed incl making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces. |
| 158 | Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 200/250 mm sweep with louver ,white in colour includingcutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. Make: Havells Model Ventil Air-DX White or equivalent in Crompton/Almonard |
| 159 | S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 160 | Supply and fix MCB SPN 6 to 32 amps 10 KA, \"C\" series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. |
| 161 | Supply and fix MCB SP 6 to 32 amps 10 KA, \"C\" series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. |
| 162 | M&L for Sub main wiring in repairs with two runs ofsingle core FRLSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 2.5 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wallall as specified and directed.Note:- Two runs of 4.00 sqmm cable,one run of 2.50 sqmm cable and one run of PVC conduit will be measured as one unit. |
| 163 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30/35 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :-Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series)or its equivalent in Philips, Wipro. |
| 164 | Sppply & Laying XLPE insulated,armoured, electric cable 16 Sqmm 2 Corewithaluminium conductor,1100 volts grade, laid in trenches, fixed on poles / walls or passing through pipes including provision of necessary lugs and glands&makingnecessary connectionincluding taking down old unservicable cable of any corecomplete all as specified and directed. |
| 165 | Excavating in trenches, in any type of soilnot exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etcand getting out in any type of soil complete all as specified and directed. |
| 166 | Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.. |
| 167 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 168 | Supply laying and jointing GI pipe\"light grade\" 40 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittingscomplete all as specified and directed. |
| 169 | M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable completeallspecified and directed. |
| 170 | M & L for brick size sub class ‘B’ (modular size), laidflat in trenches for protection of cable complete allas specified and directed. |
| 171 | Supply & fix in repairs and testing of Energy efficient 5 Star BEE rating, electric geyser of 25 liters capacity with Fiber/ceramic body with puff insulation inner tank ceramic with all in built safety accessories like thermo start / automatic thermal cut out with ON/OFF/Cut out indications all pre wired and additional safety accessories like pressure release valve, non return valve in same or other position as ordered with the help of suitable suitable size of nuts & bolts making necessary electrical connection incl taking down and safe deposit of old unserviceable Geyser to E/M Store complete all as directed by Engr-in-charge. (Make- Havells, Model- Puro plus or equivalent,Bajaj) |
| 172 | Supply and fixing LED flat panel fitiing fabricated CRCA sheet steel duly powder coated housing 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling glare free opal diffuser PF>0.95 , lumen efficacy>100 lm/W, THD<10% operating range 220v to 240V,CRI>80 warm white 3500/4000k including connecting up with driver three core flexible copper conductor cases of suitable size and all accessaries all as specified and directed. |
| 173 | Supply and fixing Earthing to DB/Panel with galvanised steel earth plate electrode60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead 4.0 sqmm galvanised iron wire by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead shall be protected by GI pipe 15 mm dia medium grade and connected to distribution board includingexcavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and as directed. |
| 174 | M&L of earthing complete with GI steel earth plate electrode 60cm x 60cmx6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32x6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion. |
| 175 | M&L of earthing complete with GI steel earth plate electrode 60cm x 60cmx6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32x6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion. |
| 176 | Supply laying and jointing GI pipe\"light grade\" 32 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittingscomplete all as specified and directed. |
| 177 | Supply laying and jointing GI pipe\"light grade\" 25 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittingscomplete all as specified and directed. |
| 178 | Supply laying and jointing Stop valves, 32mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 179 | Supply laying and jointing Stop valves, 25mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
