|
| 1 | M & L for Scarifying or picking gravelled,macadam or bituminous macadam surfaces in area exc 400 sqm, n.exc 50mm complete all as specified and as directed. |
| 2 | M & L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal)complete all as specified and as directed. |
| 3 | M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc |
| 4 | M&L for Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MaRTH specification for road and bridge works 2013, using mechanica sprayer after cleaning of existing surface as specified and directed |
| 5 | M&L for premix bituminous macadam with 4% binder content (paving bitumen of grade VG-30) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver,duly rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and vibrating roller etc, complete all as specified and directed.Notes:- The contractor\"s quoted rates shall also be deemed to include the following elements:(i)The contractor shall get the mix design done through Govt. approved Lab and the same shall be got approved from the GE before providing Bituminous Macadum.(ii)In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.42 per Kg. |
| 6 | M&L for Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5% binder content (paving bitumen of VG-30 grade)by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, the surfaces rolled and compacted to required camber and gradient with 08 to 12 tonne power roller andtandem vibrating roller etc complete all as specified and directed.Notes:- The contractor\"s quoted rates shall also be deemed to include the following elements:(i) The contractor shall get the mix design done through Govt. approved Lab and the same shall be got approved from the GE before providing SDAC.(ii)In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.42 per Kg .(iii)The thickeness of SDAC indicated above is the minimum thickness, Further, it is clarified that no payment for the addl. thickness in case required to be provided to achieve the desired levels, slope & making good the undulations etc, all as directed by the GE, shall be made. |
| 7 | M&L for Preparing bituminous surfaces of road and making 2.5mm thick centre lines, stops lines, dashes, arrows etc and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with @ 5 Kg/Sqm and applying glass beads @ 300 gms/Sqm over painted surfacesspecial applicator machine aal as per manufacturers instruction complete all as specified and directed. |
| 8 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 9 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed |
| 10 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per Manufactures instructions |
| 11 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed. |
| 12 | M &L for Hardcore of broken stoneof gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed. |
| 13 | M & L for 100mm thick PCC 1:3:6 type B-2 using 40mm graded stone aggregate as in sub base/flooring etc complete all as specified and as directed. |
| 14 | M & L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand all as specified and as directed. |
| 15 | Surface dressing of soft/loose soil n exc 15 CM deep at road side berm complete all as specified and directed |
| 16 | Removing of excavated surplus soil not exceeding 50m and depositing where as directed at a level not exceeding 1.5m above the staring point complete all as specified and as directed. |
| 17 | M&L for 75 mm spread thickness Moorum/ red bajri spread, rolled and consolidated to gradient and camber required |
| 18 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish off the premises, etc., complete all as specified and as directed. |
| 19 | M & L for 15mm thick rendering in C.M. (1:6) on fair faces of brick work finished fair and even without using extra cement complete all as specified and as directed. |
| 20 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 21 | Material and labour forold size sub class B Bricks, straight or curved on plan exc 6m men radius built in cement mortar (1:6) havising comoressivestrenght notless than 75 kg/Sq cm complete all as specified and as directed. |
| 22 | Ditto as per item No 21 except bricks all as specified and directed |
| 23 | Fixing only of Solar- old LED based Road stud/ Cat eye after safe removal from exixting road at site all as specified and directed. |
| 24 | Dismantling of stone slabs and tiles laid,bedded and pointed in any mortar of any description or thickness in floors, aprons etc all as directed by Engineer-in-charge. |
| 25 | M&L for Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks over compacted sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 26 | M&L for Plain Cement Concrete type B-1, (1:2:4) (20mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 27 | M&Lfor Pre cast RCC (1:2:4) type B1 using 20mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 28 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed. |
| 29 | Dismantling Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed. |
| 30 | S & F 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed. |
| 31 | M&L for 25 mm thick PCC type B-1, 1:2:4 (20mm graded stone aggregate) as in sub base/floor etc as a levelling course complete all as specifed and as directed. |
| 32 | M&L for 38 mm wide glass dividing strips, 3mm thick complete all as specifed and as directed. |
| 33 | M&L for 100 mm thick,Cement concrete, type D-2, (1:4:8), 40 mm graded stone aggregate as in sub base even and rough to receive topping layer all as specified and directed |
| 34 | M&L for 75 mm thick PCC 1:2:4 type B2 using(40 mm graded aggregate) as in hardstanting and pavings including finishing surfaces of concrete topping even and fair(with out using extra cement) complete all as specified and as directed. |
| 35 | M&L 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A’complete all as specified and directed |
| 36 | M&L for 50 mm thick PCC 1:3:6 using(20 mm graded aggregate) as sub floor, sub base even and rough to recieve the topping layer as in sub base complete all as specified and as directed. |
| 37 | M&L for chequered cement concrete tiles of size 30cm x 30 cm x 25 mm thick with white cement and pigment, top surface treated with antifungal paiunt set and jointed and pointed in neat cement siurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed. |
| 38 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels,benching/haunching of manhole, road side drains includng use & waste of fromwork complete all as specified and directed. |
| 39 | M&L for PCC 1:3:6 type C2 (40 mm graded aggregate) in foundations, filling and mass concrete on top surface to receive topping layer/as levelling course including necessary formwork all as specified and as directed. |
| 40 | NOTES:1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. |
