|
| 1 | Part - I Steel Furniture |
| 2 | Almirah med steel with shelves as per drwgFD-1032 and specification having as under :-a)1mm thick MS steel sheet shall be used for manufacturing of Almirah.(b) 100mm long CP Handle shall be provided as per Drg.(c) 6 lever lock shall be provided with duplicate Keys (d) Complete Almirah med Steel internal surface shall be painted with two coats of smoke gery paint over a coat of red oxide, External three sides shall be painted two coats of hammer tone paint over a coat of red oxide whereas external surface of door shall be painted with two coats of maroon colour over a coat of red oxide.(e) All shelves of Almirah med Steel shall be welded to existing places.(f) Rest all as specified & shown on Drg.(g) Name plate including CA No & Name of Contractor. |
| 3 | Almirah steel glazed as per drwgFD-1034 and specification having as under :-(a) 1mm thick MS steel sheet shall be used for manufacturing of Almirah.(b) 100mm long CP Handle shall be provided as per Drg.(c) 6 lever lock shall be provided with duplicate Keys (d) Complete Almirah Large Steel internal surface shall be painted with two coats of smoke gery paint over a coat of red oxide, External three sides shall be painted two coats of hammer tone paint over a coat of red oxide whereas external surface of door shall be painted with two coats of maroon colour over a coat of red oxide.(e) All shelves of Almirah Large Steel shall be welded to existing places.(f) Rest all as specified & shown on Drg.(g) Name plate including CA No & Name of Contractor. |
| 4 | Side rack with tray as per drwg FD-1023 and specification having as under :- (a) 38x38x3mm thick angle iron shall be used for legs and shelves shall be made of 1mm thick MS sheet(b) All Steel surface shall be painted with two coats of synthetic enamelled paint over a coat of primer. |
| 5 | Stool Steel 305x305x510mmas per drwgFD-81(M) and specification having as under :- (a) Stool shall be made of 1.6mm thick MS sheet and rest all as per drawing and directed by GE/EIC. |
| 6 | Table Office Officer Steel as per drwgFD-1003 and specification having as under :- Frame shall be made of 25mm Square CRCA tube with 16 guage wall thickness. Three drawers of equal size shall be provided at right hand side. Std quality PVC inner shoe shall be provided to each legs. S/S locks shall be provided to drawer. Roller channel shall be provided each drawers for smooth functioning. Recessed handles shall be provided to each drawers as per sample kept at BSO yard Table top shall be made of 25mm thick Pre-laminated particle board, colour/shade as approved by EIC/GE with 2mm thick PVC edging all around the top with edge binder machine. All steel surfaces shall be powder coated finish. Colour shall be approved by GE/EIC. Rest all as shown on drg or as directed by EIC. |
| 7 | Table Office Clerk Steel as per drwg FD-1004 and specification having as under :- (a) Frame shall be made of 25mm Square CRCA tube with 16 guage wall thickness. Three drawers of equal size shall be provided at right hand side. Std quality PVC inner shoe shall be provided to each legs. S/S locks shall be provided to drawer. Roller channel shall be provided each drawers for smooth functioning. Recessed handles shall be provided to each drawers as per sample kept at BSO yard Table top shall be made of 25mm thick Pre-laminated particle boardcolour/shade as approved by EIC/GE with 2mm thick PVC edging all around the top with edge binder machine. All steel surfaces shall be powder coated finish. Colour shall be approved by GE/EIC. Rest all as shown on drg or as directed by EIC. |
| 8 | Almirah large steel with shelves as per drwg FD-1031 and specification having as under :-(a) 1mm thick MS steel sheet shall be used for manufacturing of Almirah.(b) 100mm long CP Handle shall be provided as per Drg.(c) 6 lever lock shall be provided with duplicate Keys (d) Complete Almirah Large Steel internal surface shall be painted with two coats of smoke gery paint over a coat of red oxide, External three sides shall be painted two coats of hammer tone paint over a coat of red oxide whereas external surface of door shall be painted with two coats of maroon colour over a coat of red oxide.(e) All shelves of Almirah Large Steel shall be welded to existing places.(f) Rest all as specified & shown on Drg.(g) Name plate including CA No & Name of Contractor |
| 9 | Chair CBA Steel as per drwgFD-75(M) and specification having as under :- ((a)Frame shall be of 25mm dia. 1.6mm thick MS conduit Pipe(b)Timber : First class hard wood teak. Free from knots and sal wood well seasoned.(c)Frame : all joints welding shall be done with standard workmanship and painting of two coats synthetic enamel paint of olive green shade shall be provided over a coat of zinc chromate steel primer to the entire steel surfaces. Painting shall be done by spray gun.(d)Time work : All wooden surface shall be French polish with high class French polish all as specified.(e)Cane weaving : Cane weaving shall be done with half round white plastic cane 2 to 2.5mm wide and 0.4mm thick and shall be covered with 3mm wide half round plastic cane. The cane shall be of vergin quality, ISI marked and shall be got approved by the GE before incorporation in work. |
| 10 | Chair CB Steel as per drwg FD-75(M) and specification having as under :- a) Frame shall be of 25mm dia. 1.6 mm thick mS conduit pipe.(b) Timber :- First class hard wood teak. Free from knots andsal wood well seasoned.(c)Frame :- all joints welding shall be done with standard workmanship and painting of two coats of synthitic enamel paint of olive green shade shall be provided over a coat of zinc chromate steel primer to the entire steel surfaces. Painting shall be done by spray gun.(d) timber work :- All wooden surface shall be french polish with high class french polish all as specified.(e) Cane Weaving :- Cane weaving shall be done with half round white plastic cane 2 to 2.5mm wide and 0.4mm thick and shall be covered with 3mm vide halrf round plastic cane. The cane shallbe of vergin quality, ISI marked and shall be got approved by the GE before incorporation in work. |
| 11 | Chair School with Hand Board as per drwgFD/E6/MAP/5 and specification having as under :- (a)Chair school with Hand Board shall be manufactured all as per details shown in the drawing. All dimentions, shape and size shall be followed as per drawing..(b)Legs of chair shall be made of 25mm dia MS pipe (18 Gauge).(c)Hand board (Openable type) shall be of 18 mm thick Prelaminated particle board (one side decorative finish shade ads approved by GE and other side white balancing lamination) as specified here-in –before. Hand board shall be hinged at right hand side of chair arm screwed to 25mm dia MS pipe inested in 20mm dia MS rod welded to the frame. standard PVC edging (minimum thickness 1.6mm) shall be provided all round in hand board.(d)Hard rubber/PVC shoe shall be provided to the bottom of each leg.(e) Seat and back shall be in one piece made out of PVC as shown on drawing.(f)Hard Rubber/PVC shoe shall be provided to the bottom of each leg.(g)All steel members shall be powder coated.(h) Rest all as shown on drawing. |
| 12 | Bed Hard Steel as per drwgFD/E6/MAP/08 and specification having as under :- (a) Bed hard shall be manufactured all as per details shown in the drawing. All dimensions, shape and size shall be followed as per drawing.(b) All square and rectangular MS Pipes shall be of thickness 18 guage.(c) Top of bed shall be of 12mm thick commercial plywood (unpolished) as per IS-303. (d) Head board and foot board shall be of 18mm thick Prelaminated particle board (both side decorative finish shade as approved by GE) as specified here-in-before, screwed to MS strip all as per details shwon in drawing. Standard PVC edging (Minimum thickness 1.6mm) shall be provided alround in Head board and food board.(e) Hard rubber PVC shoe shall be provided to the bottom of each leg.(f) All exposed steel surfaces shall be painted with two coats of synthetic enamel black paint (Powder coating) over a coat of zinc chromate steel primer. The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to aplication of paint(h) Rest all as shown on drawing. |
| 13 | Charpoy MSply top as per drwgFD/MAP/04 and specification having as under :- (a) All dimensions given in millimeters.(b) Charpoy MS tube frame shall be made of 25x65mmx16 gauges MS tube side alround, leg of size 32x32mmx16 gauges MS tube and stifner of size 25x25mmx16 gauge.(c) Over all size of charpoy shall be 1980 mm (L) x 900mm(W) x 440mm (H)(d) Top of charpoy made of 12mm thick BWR grade ply wood.(e) All joints, welding & fixing shall be done in accordance with the standard workmanship/specification. The welding joints shaal ve filled smooth before application of paint, painting shall be done with two coats of synthetic enamel colour black with spray gun over two coat red oxide primer(f) All mild steel members shall be spray painted unless otherwise specified.(g)MS plate 32x32x5 welded at bottom of legs and over which 3 mm rubber sheet fixed with adhesive.(h) 6 Nos MS plate of size 25x60mm x 6mmMS cleat welded with frame to support ply.(j) Rest complete all as specified in drg & directed by Engr-in-Charge.(k) Name plate including CA No & Name of Contractor. |
| 14 | Rack Pigeon Hole as per drwgFD-1037 and specification having as under :-(a)1mm thick MS Steel shall be used for manufacturing of Rack Pigeon Hole.(b)Complete Rack Pigeon Hole external/ internal surface shall be painted with Hammer Tone paint over a coat of Primer (.c) Complete Almirah Rack Pigen Hole external/internal surface shall be painted with Hamer Tone paint over a coat of Primer. (d) Rest all as specified & shown on Drg. |
| 15 | Locker bed side steel as per drwgFD-1029 and specification having as under :-(a) Locker bed side steel consist of half portion shelf and half portion for hanging of cloths, complete all as specified and shown on drg with following specifications :-(b) 1mm thick (20 gauge) MS steel sheet shall be used for manufacturing of locker bed side steel.(c) Hanger rod shall be of 20mm dia chromium plated steel conduit 16 gauge thick and fixed with chromium plated sockets on both ends all as directed by Engr-in Charge.(d) 20 x 3mm flat iron bent to shape as per existing drgs and welded to shutter for umbrell hanging(e) 1mm thick steel stiffner bent to shape as indicated in drgs welded for peg set of three Nos. (f) Hinges shall be 3mm thick MS plate pin type hinges made to shape as per existing drgs welded to locker body with runing welding(g) Complete locker bed side Steel external and internal surface shall be painted two coats with Olive Green paint over a coat of Primer. (h) 100mm long CP Handle shall be provided as per Drg.(j) 6 lever Lock shall be provided with duplicate Keys as approve by Engr-in-Charge (k) All shelves of locker bed side Steel shall be welded to existing places.(l) Rest all as specified & shown on Drg. |
| 16 | Table cook house as per drwgFD-297 and specification having as under :- (a)Legs and Frame shall be made of 25mm thick square tube 1.6mm thick.(b)Top of table shall be of 20mm thick Marble Stone.(d)All Steel surface shall be painted with two coats of synthetic enameled paint over a coat of primer.(e) Rest all as shown on drawing |
| 17 | Part - II TP / Branded Furniture |
| 18 | Bath Mat (PVC) as per Drawing No \"FD/E6/MAP/07\"and specification having as under :- (a) All PVC work shall be of standard class PVC. All dimensions, shape and size shall be followed as per drawing.(b) Hard rubber shoe shall be provided to the bottom of each leg.(c) Rest all as shown on drawing |
| 19 | Chair CBA Steel/ Visitor Chair as per Drawing No :TP and specification having as under :- The visitor chair shall be ergonomically designed with a comfortable seat and backseat. The seat and back shall be manufactured using moulded polyurethane (PU) foam, ensuring lasting comfort and support. The seat foam density shall be 35-45 kg/m3, while the back foam density shall be 32 kg/m3 , conforming to long-term usage requirements without sagging or deformation. The tapestry shall be of high-quality fabric, secured tightly over the PU moulded surfaces to avoid wrinkles and maintain a neat appearance. The armrests shall be made from injection-moulded PU material, designed to offer ergonomic elbow support and integrated firmly with the chair’s frame. Overall size of chairs shall be 585mm (width)x 450mm (Depth)x 820mm(H). The chair frame shall be structure fabricates using 25mm diameter round MS pipe with 16 gauge thick, with powder-coated finish for corrosion resistance and enchanced aesthetic appeal. The seat and back shall be mounted on the frame using concealed fixing for a clean finish. The entire frame shall be weled and gound smoothly to ensure safety and a uniform look. All the dimensions and materials shall conform to the original manufacturer’s specification. The product must comply with BIFMA standards and be manufactured under ISO 9001, 14001, 45001 & 50001 certified quality systems. Supply and placement to be done as per the approved sample and instructions of the Engineer-in-charge.. |
| 20 | Chairexecutive Revolvingas per Drawing No :TP and specification having as under :- (a)High Back revolving chair of approved make and model. The chair shall be ergonomically designed with a highback-height backrest to support the lumbar region and promote healthy posture during extended working hours. The seat and back shall be upholstered using high-quality net tapestry to ensure breathability, comfort and durability. The seat cushion shall be manufactured using high-density polyurethane (PU) foam, offering consistent support and resistance to sagging or deformation over time. The chair shall be provided with adjustable PU armrests, designed to offer ergonomic support to the elbows and forearms with vertical adjustment to suit different user requirements.(b)The chair shall be equipped with a synchro-tilt mechanism allowing the user to recline the back rest in sync with the seat and lock it in multiple positions for improved comfort. The seat height shall be adjustable using a smooth and durable gas lift mechanism. The base shall be a 5 legged star base made from high strength nylon material, fitted with twin-wheel castors for smooth and stable mobility on different floor surfaces. The chair structure shall be neatly finished with concealed fixing to ensure aclean and uniform appearance suitable for office use.(c) Overall dimensions: W 590(Handle to Handle) x D 520 x H 1100-1200 mm.(d)All dimension and materials shall conform to the original manufacturer’s specification. The product shall comply with BIFMA standards and be manufactured under ISO 9001, 14001, 45001 and 50001 certified quality systems. Supply and placement shall be as per the approved sample and instructions of GE/ Eingineer-in-Charge.. |
| 21 | Receptacle PVCas per Drawing No : FD/E-6/MAP/13 and specification having as under :- (a)Receptacle shall be of covered plastic container of 20 litre capacity made with thick polymer plastic with pedestal. Receptacle shall of bright colour ie Red, Green, Blue etc as approved by GE..(b) Rest all as shown on drawing. |
| 22 | Table Conferenceas per Drawing No :TP and specification having as under :- (a)The conference table shall be of approved make and model, designed to provide a professional appearance and functional utility for formal meetings and discussions. The table shall be ergonomically shaped to facilitate clear communication and comfortable seating for all participants. The table top shall be constructed with a total thickness of 43mm, comprising an upper top of 18mm pre-laminated particle board (PLPB) and a lower top of 25mm MDF Deco, ensuring superior strength, dimensional stability, and a elegant surface finish in an approved laminate shade. All exposed edges shall be sealed with 2mm thick matching PVC edge banding, machine-pressed to ensure a smooth, seamless and durable edge profile.(b) The table shall be provided with a flipper. The gable ends shall be fabricated form 36mm thick boards, providing a sturdy structural base, while the modesty panel shall be made from 18mm thick board, ensuring stability and aesthetic appeal, the overall design shall allow concealed wire management provisions to maintain a clean and clutter-free tabletop.(c) Overall size : 4500mm (L) x 1200mm (D) x 750mm (H).(d)All surfaces shall be pre-laminated in an approved wood grain or plain shade as per the sample approved by the EIC. The understructure shall be firmly joined using cam fittings, dowels and screws to ensure rigidity and long-term durability. The entire assembly shall be finished neatly with all visible joints aligned and concealed for a premium executive appearance. |
