Tender For Special Repair , Additional / Alternator And Provision Of Certain Sanction Works Under Age B/R-Ii Of Ge (North) Ambala Cantt, Ambala-Haryana

TDR : 53257180

Tender Notice
Corrigendum Details
BOQ

Expired

Ambala , Haryana

Tender Brief : Corrigendum : Tender For Special Repair , Additional / Alternator And Provision Of Certain Sanction Works Under Age B/R-Ii Of Ge (North) Ambala Cantt

Document Fees
₹ 500 /-

EMD
₹ 77820.0 /-

Tender Value
₹ 38.91 Lakhs /-

Submission Date
11-02-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	04-02-2026	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	11-02-2026
2	21-01-2026	Amd BOQ	BOQ	04-02-2026
3	19-01-2026	Amendment Date	Date	04-02-2026
4	14-01-2026	Amd Date	Date	28-01-2026

Name of Work: Special Repair , Addn/Altn and provn of certain sanction works under AGE B/R-II of GE (North) Ambala Cantt

Sl. No.	Item Description
1	Schedule \"A\" Part-I (B/R itmes)Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches,pillar, etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.
2	Material and labour for brick work with sub class \"B\" old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.
3	Material & Labour brick work with sub class -B bricks, in half brick thick walls, built in cement moratr 1:4 straight or curved on plan to any radius , ,complete all as specified and directed.
4	Dismantling stone slab of any description or thickness laid, bedded and pointedin any motar in floors etc ,complete all as specified and directed.
5	Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for, ,complete all as specified and directed.(Reinforced cut to facilated dismentling)
6	Material & Labour for Reinforced cement concrete design mix M-25 using 20mm graded stone aggregate, as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likedack slab , ,complete all as specified and directed.
7	Material & LabourTMT steel bars 10mm dia and over cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia , ,complete all as specified and directed.
8	Material and labourTMTsteel bars 5mm dia and over up to and including 10mm dia in stirrups, spacers etc, cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.
9	Cuttingchases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth ,complete all as specified and directed.
10	Material & Labour for Granite (of any type)slab 18-20 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement as in floors/ cooking plateform, with admixiture of pigment to match the shade of granite stone including grindingand polishing complete over and including20 mm thick screed bed in CM 1:6,complete all as specified and directed.
11	Material & Labour for Granite (of any type)slab 18-20 mm thick machine cut , jointed with gray cement slurry and pointed with white cement as in vertical surfaces / dado / skirtingwith admixiture of pigment to match the shade of granite stone indluding grindingand polishing complete over and including10 mm thick backing coat in CM 1:4 ,complete all as specified and directed.
12	Material & Labour rounding to edges of stone slabboth edge such as in steps, cooking plateformand other similar situtaions withgrinder, ,complete all as specified and directed.
13	Dismantling floor,hearth or wall tilling including cement mortar bedding (but not backing ),removing serviceable tiles to store and rubbish off premises , ,complete all as specified and directed.
14	Demolition of cement concrete (unreinforced) of any descriptionand in any position including any type of sunken treatment , roof treatment, PCC padding, roof PCC tiles,lime concrete etc. , ,complete all as specified and directed.Note: All Demolished material / debries will be taken by the contractor out side of thecantonment without any extra cost to the govt,contractor should quote his rate Keeping this aspect in mind.
15	Material & Labour non–skid ceramic coloured tiles joint free premium/1st quality (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6 ,complete all as specified and as directed.
16	Material & Labour for non–skid ceramic colouredout doortiles10mm thick (square /rectangular) area of each tiles exe 0.18 sqm but n exe 0.38 sqm, in skirting/dado etc, set and jointed in neat cement slurry and pointed in colouredcement to match overand including 10 mm thick backing coat with cement mortar (1:4) complete all as specified and as directed.
17	Material and labour glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings /dados of size 300 x 600 x 7 to 8 mm thick or nearest size as required, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 ,complete all as specified and as directed.
18	Material and labour vitrified ceramic light shade tiles premium/1st quality 9-10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but n.exc. 0.42 sqmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in CM 1:6 ,complete all as specified and as directed.
19	Material and labour vitrified ceramic light shade tiles premium/1st quality 9-10mm thick of same description as of floor tiles as in serial item No 19 above but 100 to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 ,complete all as specified and as directed.
20	Material and labour for25 mm thick PCC 1:2:4, type B0 as in sub base of floor (using 12.50mm gradedcrushed stone aggregate), finished even & fair without using extra cement complete all as specified and as directed.Note- This item shall not be executed in the location, where dismantling of tiles only have been done.
21	Material and labour for 8 to 10mm thickheavy duty (digital) vitrified coloured paver tiles of size 300mm x 300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) , complete all as specified and as directed. Make: Endura of Johnson or Durastone of Somany or equivalent make given in App ‘B’
22	Material & Labour 100 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement ,complete all as specified and as directed.
23	Material & Labour 75 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement ,complete all as specified and as directed.
24	Material & Labour machine cut kota stone slab18 to 22 mm thick of size not less than 550mm x 550mm in floor, set and jointedin neat cement slurrywith greycementmixed withpigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed .
25	Material & Labour machine cut kota stone slab18 to 22 mm thick ( kota stone shall be cut from size not less than 550mm x 550mm) in skirting , set and jointedin neat cement slurrywith greycementmixed withpigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 10 mm thick renderingin CM 1:4,complete all as specified and as directed.
26	Taking down chowkats or frames with shutterarea exceeding 1.50 Square meter andnot exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed.
27	Taking down chowkats or frames with shutterareanot exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed.
28	Taking down shutters of any description area exceeding 01 sqm but not exc 2 sqm each and removing the same from site complete all as specified and as directed.
29	Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed.
30	Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) ,complete all as specified and as directed.
31	Supply and fixing factory made single extruded WPC (Wood Polymer Composite) glazed and skeleton shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) ,complete all as specified and as directed.
32	Supply and fixing double shutter steel window box type ERW hollow P section comprising of glazed and gauged skeleton shutter fabricated fromfollowing sections :–(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces.(b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leafof T – section20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf.(c) Vertical mullion shall be ERW hollow T –section of size 60 x 25 mmmade from 1.25 mm thickMS sheet(d) The above steel window shall be deemed to include the following accessories/ fittings :i)Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape– 04 Nos per windowii)Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enamelled 150mm long– 2 Nos per leaf.iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf.(v) Cleat 55 mm long of solid square 15x20x.63mm square – 01 No per leafvi)Pintal hinges 12 x 75 mm – 2 Nos each leafvii) 10mm square Guard bar @ 10 cm c/c welded to frame.(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws.(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B–1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type.
33	Supply and fixing box type using ERW hollow \"P\" section ventilators fixed type with glazing barincluding MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer, ,complete all as specified and as directed.
34	Material & Labour sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, ,complete all as specified and directed.
35	Material and labour forPCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in holdfasts complete all as specified and as directed.
36	Supply and fixing mild steel works in bands, straps, supports, stays, bolts, hooks, hold fasts etc, similar articles conforming toFe-290.Gde-E-165, ,complete all as specified and directed.
37	Supply and fixing mild steel door shutter two leaves with frame of 20 gauge MS sheet (all around) and leaves of 21 gauge MS Sheet (all as per godrej pattern) with three way locking arrangement with brass lock with duplicate key and CP handle including two coats of spray painting over a coat or red oxide primer complete fixed in existing cupboard fixed with necessary nuts, bolts including embedded in PCC 1:2:4 (area of opening shall be measured), complete all as specified and as directed.
38	Supply and fixing 150 mm long aluminium anodised barrel tower boltsof extruded section and fixed ,,complete all as specified and as directed.
39	Supply and fixing 200 mm long aluminium anodised barrel tower boltsof extruded section and fixed ,,complete all as specified and as directed.
40	Supply and fixing 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter ,,complete all as specified and as directed.
41	Supply and fixing 150 mm long aluminium handle cast type anodised complete all as specified and as directed.
42	Supply and fixing mild steel butt hinges 100 mm long medium weight and fixed complete all as specified and as directed by the Engineer-in-Charge.
43	Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed.
44	Supply and fixing of butt hinges 100mm long of stainless steel, medium weight, complete all as specified and as directed.
45	Material & Labour for forsted sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directe.
46	Supply and fixing galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised mild steel wire staple , complete, all as specified and as directed.
47	Supply and fixing stainlesssteel curtain rod 25mm dia having wall thickness 1.00mmfixed with and including stainless steeldecorative brackets, two lotto for each rod length at both endetcas in repair complete all as specified and as directed.
48	Dismantling of boarding of any description and in any position of any size complete all as specified and as directed.
49	Supply and fixing for stainless steel 304 grade wire basket cutlery of size 370 x 485mm premium quality fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
50	Supply and fixing for stainless steel 304 grade wire basket (average weight 2.5 to 4 Kg per Basket) of pull out type like plain /cup & saucer /bottle /multi purpose /2–3 shelf basket etc for kitchens of required size fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
51	Supply and fixing for Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
52	Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed. Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ.
53	Supply and fixing for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
54	Material and labour for 18 mm thick HDHMR board coloured prelaminated one side and other side plain (density over 850Kg/Cum, fixed with screws for kitchen cupboard and cabinet, shelves for cupboard, frame with door if required including 1mm thick pvc patti on cut edge of boards complete all as specified and as directed . Make :- Action Tesa, Century ply, Greenply
55	Supply and fixingPVC connections 15 mm size and600 mm of length with PTMT nuts and PVC washers on both endsas in repair completeall as specified and as directed.
56	Supplyand fixing as in repairPVC connections 15 mm sizewith PTMT nuts of length 450 mm complete all as specified and as directed.
57	Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed .
58	Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
59	Material and labour for galvanised iron tubing 15mm bore, ISI marked, medium grade with all fittings and fixed complete to walls and ceilings or laid in floorscomplete all as specified and as directed.
60	Material and labour galvanised iron tubing 20 mm bore, ISI marked, medium grade with all fittings and fixed complete to walls and ceilings or laid in floorscomplete all as specified and as directed.
61	Supply and fixing as in repair bib tap 15mm bore fancy type brass chromium plated with long body,ISI marked, wall flanges and capstan head,screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed.
62	Supply and fixingbib tap 15mm bore fancy type brass chromium plated with long body,ISI marked, wall flanges and capstan head,screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed.
63	Supply and fixingfancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and as directed.
64	Supply and fixing 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, scrwed both ends for iron pipe or for unions,complete all as specified and as directed.
65	Material and labour for 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement as in repair complete all as specified and as directed.
66	Material and labour for 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cementcomplete all as specified and as directed.
67	Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia,60cm long between flanges complete all as specified and as directed .
68	Supply and fixing brass chromium plated tubular towel rail, 20mm dia,60cm long between flanges complete all as specified and as directed .
69	Supply and fixing as in repair15mm bore cast copper alloy chromium platedangular stop valves, ISI marked,screwed down, high pressure withcapstan head, screwed down both ends for iron pipe or for unions complete all as specified and as directed.
70	Supply and fixing15mm bore cast copper alloy chromium platedangular stop valves, ISI marked,screwed down, high pressure withcapstan head, screwed down both ends for iron pipe or for unions complete all as specified and as directed.
71	Supply and fixing for chromium plated double lever sink mixer (hot and cold) with out popup and 450 mm long braided hosescomplete all as specifiedand directed
72	Supply and fixing ofcorner Glass shelf 300 mm(with brassbracket)including fixing with brass screwsto wall complete fixed as in repair complete all as specified and as directed.Make- KICH Cat No- GSC 1155 or eqv /Prayag)
73	Supply and fixing of brasschromium plated hand shower ( health faucut) with 8 mm dia 1.2 mtr long flexible tube and wall hook with NRV ( back flow preventer )complete fixed to wall complete fixed as in repair complete all as specified and as directed.Make : Jaquar Cat Part No : ALD577 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
74	Supply and fixing of brasschromium plated hand shower ( health faucut) with 8 mm dia 1.2 mtr long flexible tube and wall hook with NRV ( back flow preventer )complete fixed to wall complete fixed complete all as specified and as directed.Make : Jaquar Cat Part No : ALD577 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
75	Supply and fixing of counter top vitreous china wash hand basin white with 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing ofwaste fitting, etc. as in repaircomplete all as specified and as directed . Make : CERA Cat part No.S2020137 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
76	Supply and fixing of single piece water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, cistern fittings, S or P Trap complete fixed as in repair complete all as specified and as directed. Make : CERA Cat part No.S1013209 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
77	Supply and fixing of brass CP toilet paper holder including fixing with brass screwsto wall complete fixed as in repaircomplete all as specified and as directed. Make : Jaquar Cat Part No : ACN-11535 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
78	Supply and fixing in replacement of 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
79	Supply and fixing of 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
80	Supply and fixing for cabinet type looking mirror size 450 mm x 300 mm box typecomplete all as necessary itemscomplete all as specified.
81	Supply and fixing in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of grade SS304 of size 24\"x30\"x10\" including screws and fixing arrangements , complete, all as specified and as directed.
82	Supply and fixingsinks with drainage board made out of stainless steel 1mm thick sheet for kitchen or laboratory with plugs, waste pipe, brass chromium plated coupling and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmwith bowl size 410mm x 330mm x 160mm as in repair , complete, all as specified and as directed.
83	Supply and fixing as in repair water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting anddismantling of existingwater tanks and removing from site all as specified in SSR Part–I , complete, all as specified and as directed.
84	Supply and fixing , water storage tank, 1000 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI unionall as specified in SSR Part–I , complete all as specified and as directed.Note : - The colour of tanks shall be white colour .
85	Supply and fixing of 15 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for ironpipe as in repair,complete, all as specified and as directed.
86	Supply and fixing of 20 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for ironpipe as in repair,complete, all as specified and as directed.
87	Supply and fixing of 20 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for ironpipe ,complete, all as specified and as directed.
88	Supply and fixing in repair grating doom 100mm dia of PTMT (minimum 25 gms) complete all as specified and directed.
89	Supply and fixing25mm dia float valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (minium weight-210 grm)complete all as specified and as directed.
90	Supply and fixing of 32 mm dia PVC waste pipe of standard length for wash hand basin / Kitchen sink etc asin repair complete all as specified and as directed.
91	Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. complete all as specified and as directed.
92	Material and labour forrendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar (1:4) and finished even and smoothwithout using extra cement, complete, all as specified and as directed.
93	Material and labour for rendering 15mm thick on any faces of brick work or concrete wall surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete, all as specified and as directed.
94	Material and labourfor rendering 10 mm thick on any faces of brick work or concrete ceiling surfaces in cement mortar (1:3) andfinished even and smooth without using extra cement complete, all as specified and as directed.
95	Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection, etc. and applyingtwo coats of cement base paintover a coat of alkali resistant primer complete all as specified and as directed.
96	Material and labourfor preparation of new plastered/unplastered surfaces and applyingtwo coats of white lime wash on surfaces of walls, chajjas, roof projection complete all as specified and as directed.
97	Material and labourfor preparation of new plastered/unplastered surfaces and applyingthree coats of white lime wash on surfaces of ceiling, chajjas, roof projection complete all as specified and as directed.
98	Material and labour for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of acrylic distemperwith painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed.
99	Material and labour complete removal of existing treatment on walls, pillars, cornices etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and preparation of surfaces and applying two coats of acrylic distemper over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed.
100	Material and labour forpreparation of new steel surfacesof any description, not otherwise described, over10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and as directed.
101	Taking down ofPVC /cast iron/RCC drain pipes /rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including cleaning or refixing or removal from site, jointed in cement mortar and taking out of trenches,complete all as specified and directed.
102	Supply and fixing 110mm diaUPVC, soil waste drain pipe, type ‘B’ ,conforming toIS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified anddirected..(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)
103	Supply and fixing 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and as directed.
104	Supply and fixing 75mm diaUPVC, soil waste drain pipe, type ‘B’ ,conforming toIS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified anddirected.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)
105	Supply and fixing75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified.(Note- UPVCbends shall be confirm to BS 4515 DIN 19531 and DIN 19534)
106	Supply and fixing 75 mm bore UPVC (SWR), vent cowls including jointing with solvent cement, complete all as specified and as directed.
107	Supply and fixing110mm bore PVC (SWR) junction single (Single T) equal or unequalwith access doors complete all as specified and as directed.
108	Supply and fixing75mm bore PVC (SWR) junction single (Single T) equal or unequalwith access doors complete all as specified and as directed.
109	Supply and fixing PVC (SWR) reducerof 75 x110 mm bore complete all as specified and as directed.
110	Material & Labour Cast iron work grade FG 150, unmachined, inbrackets, gully traps,gratings, railing, frames,manhole covers, fire and soot doors, dampers, stopvalve boxes, gate stops,parts of ranges, balusters and similar articles.each article exc. 5.0 KG,complete all as specified and as directed.
111	Cutting into existing manholes for connecting new drains, and making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 100 mm dia,,complete all as specified and as directed.
112	Material and labour for concrete bed in PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate to drain pipes includingpacking under and haunchingagainst the sides of pipes, after they are laid andtested for 150 mm dia (internal)pipes complete all as specified and as directed by the Engineer-in-Charge. (Pipes shall be measured & paid separately).
113	Supply and fixing pre–painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, having zinc coating 150 gm per sqm (Az–150) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
114	Supply andFixingmild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed.
115	Demolition of mud in roofs, any thickness, including plastering and leeping (whethere full thickness removed or only a part thereof) including emoving old tar felt, all loose dirt, cement plaster, cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss, small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work , complete, all as specified and as directed.
116	Material and labour PCC 1:5:10 type E-2, using 40 mm graded crushed stone aggregate as in filling in sunken floor, rounded or chamfered on edges , complete, all as specified and as directed.
117	Material and labour rendering 15 mm thick on brick work or concrete wall surfaces in cement mortar 1:4including mixing water proofing compound @ 2% by weight of cement or as per manufacturer\"s instruction and finished fair and even without using extra cement complete all as specified and as directed by the Engineer-in-Charge. ( Note- The cost of providing WPC shall be included in quoted rate under this item )
118	Material and labour for sunken floor water proofing treatment complete all as under :–(A) Scrapping the surface with wire brush and cleaning with water and allow to dry.(B) Applying cement slurry @ 3 kg/sqm duly mixed with water proofing compound.(C)15 mm thick cement plaster 1:3 mixed with water proofing compound as per manufacture instruction (the corner will made rounded in concave shape).(D)Apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.5 kg/sqm.(E) Supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm.(F) Applying one coat of hot blown bitumin grade 85/25 conforming to IS–702 @1.50 kg/sqm.(G)Curing the sunken portion with water min 48 hours by ponding.(H) Fixing 50mm bore GI pipe medium grade as in spout of 0.60 mtr length in each sunken.
119	Roughening concrete surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and directed.
120	Material and labour for providing cement concrete (1:2:4), Type B1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, roof padding, etc.,rounded or chamfered on edges including from work where ever required , complete, all as specified and as directed.
121	Material & Labour for roof treatment 15 mm thick cement plaster in CM 1:4 on other side of lathing finish the surface even and smooth without using extra onroof for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bitumious primer @ 0.40 ltr /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25\"C temprature andviscosity 70-160 cps over the primer coat with overlap of 75mm at theat the side and 100mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standred practice as per manufacture\"s instructions . The vital physical and chemical parameters of themembrane shell be under ;- (i) Joint strength in longitudinal and transverse direction at 23\"C at 650/ 450 N /5 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150\"C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane onlycomplete all as specified.
122	Material & Labour cement concrete chequred tiles of size30 x 30 mm x10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:4)complete.all as specified and as directed by the Engr-in-Charge.
123	Surface excavation not exceeding 30cm deep and averaging 15 cm deep, getting out in soft/loose soil complete all as specified and as directed.
124	Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts, wells, manholes etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed.
125	Material and labour for providing PCC (1:4:8) Type D2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.
126	Returning, filling in, including spreading, levelling ,watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.
127	Removing surplus excavated materialto a distance not exc. 50m and depositing where directedcomplete all as specified and as directed .
128	Material & Labour for Reinforced cement concrete design mix M-25 using 20mm graded stone aggregate, as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likedack slab complete all as specified.
129	Material and labour reinforced cement concrete design mix M-25 using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
130	Material and labour reinforced cement concrete design mix M-25 using 20mm graded crushed stone aggregate as inpillars, posts,struts, piers, columns and stanchionscomplete all as specified and as directed.
131	Material and labour reinforced cement concrete design mix M-25 using 20mm graded crushed stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
132	Material and labour formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished surfaces of concretecomplete all as specified and as directed.
133	Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions, work in rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and as directed.
134	Material and labour formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, for roughed finished surface of concrete complete all as specified and as directed.
135	Material and labour formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc., also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and as directed.
136	Material & Labour formwork to soffits ofsuspended slabs such roof slab, floor slabs, landings and similar work not exceeding 20 centimetre thick (horizontal or sloping) flat for rough finished surfaces of concrete ,complete all as specified and as directed.
137	Material & Labour providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternatebays (not exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work complete all as specified and as directed.
138	Material & Labour rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixingconforming to Fe–410–W (Grade E–250) quality \"A\" , complete, all as specified and as directed.
139	Supply and fixing factory made 2nd class hard wood 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on boths face . The size of rail and style as per IS:1003 (Part-1) kiln seasoned and chemically pressure treated ,complete all as specified and as directed.
140	Supplyand fixing box type using ERW hollow \"P\" section of size 60 x 25mm made from 1.25 mm thick MS sheetventilators fixed type with glazing barincluding MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer complete all as specified and as directed.
141	Supply and fixing figured glass 4mm thick pin head type, in squarenot exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters,complete all as specified and as directed.
142	Supply and fixingvitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing ofwaste fitting etc ,complete all as specified and as directed.
143	Supply and fixing for vitreous china wash down water closet pan (pedestal pattern), white (including fixing bolts but excluding flushing cistern and flush pipe) including plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminium hinges devicecomplete all as specified and as directed.
144	Supply and fixingvitreous china squatting pan, Orissa pattern,580 mm x 440 mm size, whitecolour with integral foot rest and PVC SWR \"P\" or\"S\" trap of pressure rating 6 Kg per square cm complete including provision of cement concrete bedding, connection to trap, outgoing flushing pipe, anti syphonage pipe, etc.complete all as specified and as directed.
145	S& F Vitreous China Urinal, full stall type, white with Flush pipe of polyethylene of low or high density or PVC of 32 mm dia , urinal spreader , 32 mm CP waste coupling and 32 mm PVC flexible waste pipecomplete as directed.Note : The cost of Urinal spreader , waste pipe and waste couplingare included in this item.
146	Material & Labour for cement concrete Type B–0, 1:2:4 (using 12.50 mm graded crushed stone aggregate) as in PCC padding, paving, coping, roof kerbs or mud stops, rounded, door cill, hold fast and other like works complete all as specified.
147	Material and labour forproviding precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.)chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and as directed.
148	Material and labour for plain cement concrete (1:2:4) type B-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and as directed.
149	Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified and as directed.
150	Material and labour vibratory rubber moulded coloured precast concrete interlocking paver block, any shape and sizeconforming to IS 15658-2006,ISI marked of 60 mm thickness, grade M-35 with grey cement andpigments over and including a layer of sand cushioning, 25 mm thick , complete all as specified and as directed.
151	Supply and fixing 18mm thick lead free PVC celuka ply ( minimum density 600 Kg/ Cum) of both side plain ofapproved colour other thanwhite colour fixed with stainless steel screws and solvent cement / adhesive to make kitchen / bed rooms cabinet sides, top and bottom and shelves inside the cabinets complete all as per manufacturer\"s specifications/ instructions complete all as specified and as directed.
152	Supply and fixing Continuous (piano) hinges, width of flaps 30mm mild steel, bright finish or electro galvanised ,complete all as specified and as directed.
153	Supply and fixing40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished fixed ,complete all as specified and as directed.
154	Supply and fixing Magnetic door catches of standard size for cupboard doors approved ,complete all as specified and as directed.
155	Supply and fixing Aluminium sheet, 0.5 mm thick, fixed with aluminium alloy screws/nails complete all as specifiedand directed .
156	Supply and fixing in repairstainless steel fancy type peg set of 05(05 Nos of hook in each) including fixing with steel screw and PVC rawel plug ,complete all as specified and as directed.
157	Supply and fixing of brass chromium plated wash hand basin mixer for mixing hot and cold water screwed down for 15mm dia pipe including waste popupwith 450mm long braided hoses and all connectingfittingsas in repair complete all as specified and as directed.Make:- Jaquar Cat part No.QQP-7167BPM/Cera Cat part No. F2007461or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
158	Supply and fixing ofas in repair brass chromium plated concealed stop cock with long shank and wall flange screwed down,high pressure with crutch handle, screwed down both ends for iron pipe or for unions 15mm bore complete all as specified and as directed.Make:- Jaquar Cat part No.CON-083FTKor equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
159	Supply and fixing of brass chromium plated wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange without hand and overhead showeras in repair complete all as specified and as directed . Make :Jaquar Cat Part No FLR-5267Nor equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
160	Supply and fixing chromium plated soap dispenser with glass bottlecomplete all as specifiedand directed..( Make- Jaguar or eqv Marc)
161	Supply and fixing of brass chromium plated Towel ring round including fixing with brass screwscomplete fixed complete all as specified and as directed.Make : Jaquar Cat Part No : ACN-1121BN or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
162	Supply and fixing of brass chromium plated Soap Dish Holder including fixing with brass screwsto wall complete fixed complete all as specified and as directed by the Engineer-in-Charge.Make : Jaquar Cat Part No : ACN-1131N or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA.
163	Supply and fixing in repairchromium plated overhead shower 200mmx200mm square shape single flow ABS body chrome plated with grey face plate with rubit clean system complete all as specifiedand directed..( Make- JaguarCat No- OHS - 35497 or eqv Marc)
164	Supply and fixingchromium plated overhead shower 200mmx200mm square shape single flow ABS body chrome plated with grey face plate with rubit clean system complete all as specifiedand directed..( Make- JaguarCat No- OHS - 35497 or eqv Marc)
165	Supply and fixing of brasschromium plated toilet paper holder including fixing with brass screwsto wall complete fixed as in repaircomplete all as specified and as directed.
166	Supply and fixing for stainless steel 304 grade wire basket (average weight 2.5 to 4 Kg per Basket) of pull out type like plain /cup & saucer /bottle /multi purpose /2–3 shelf basket etc for kitchens of required size fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
167	Supply and fixing for Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
168	Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed . Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ.
169	Supply and fixing for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ.
170	Material and labour for 18 mm thick HDHMR board coloured prelaminated one side and other side plain (density over 850Kg/Cum, fixed with screws for kitchen cupboard and cabinet, shelves for cupboard, frame with door if required including 1mm thick pvc patti on cut edge of boards complete all as specified and as directed. Make :- Action Tesa, Century ply, Greenply
171	Schedule \"A\" Part-II (E/M itmes)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc.,complete all as specified and as directed by the Engineer-in-Charge.
172	Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly(boxesshall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally) including provision of new covered plate over sunken box for housing themodular switches , modular socket outlets,modularfan regulators etc.for one light/fan/exhaust fan/bell point controlledby one way switch,complete all as specified and as directedby Engineer-in-Charge. Note :-a) All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid forseparately .
173	Description all as per serial item No.172 here-in-before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board,complete all as specified and as directedby Engineer-in-Charge.
174	Description all as per serial item No.172 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board,complete all as specified and as directedby Engineer-in-Charge.
175	Description all as per serial item No.172 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathedcable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copperwire as earth continuity conductor connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.Note : (i) Point wiring shall be done in a manner that not more than 02 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point.
176	Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts, complete all as specified and as directedby Engineer-in-Charge.
177	Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 voltscomplete all as specified and as directedby Engineer-in-Charge.
178	Supply and fixing of modular socket outletmultipin combined,6 Amp, one way, two module, 230 voltscomplete all as specified and as directedby Engineer-in-Charge.
179	Supply and fixing ofmodular socket outletmultipin combined, (6pin), 16 Amps, one way, two module, 230 voltscomplete all as specified and as directedby Engineer-in-Charge.
180	Supplyand fixing of modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed by the Engineer-in-Charge.
181	Supply and fixing in repair calling bell, ding dong, 230 volt, complete all as specified and as directed by the Engineer-in-Charge.
182	Supply and fixing ceiling rose surface type 2/3 terminalpolycarbonate, isolated body complete all as specified and as directed by the Engineer-in-Charge.
183	Supplyand fixingas in repairelectronic Fan regulator, modular 100 watts, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep, complete, all as specified and as directed by the Engineer-in-Charge.
184	Supply and fixing in repairLED batten fitting 18-20 watt, 4 feet, aluminium housing with electronic drivercool/warm typeindustrial model complete,connecting with copper conductor flexible cablefrom ceiling rose to connector of the light complete all as specified and as directed . Cat part No. LUMILINE+ BS20WLED865SPCSS of make Havells or equivalent in make given in Appx \"B\".
185	Supply and fixing in repair,LED batten fitting 10-12 watts, 2 feet, aluminium housing with electronic drivercool/warm typeindustrial model complete,connecting with copper conductor flexible cablefrom ceiling rose to connector of the light complete all as specified and as directed . Cat part No. LUMILINE+ BS10WLED865SPCSS of make Havells or equivalent in make given in Appx \"B\".
186	Supply and fixing in repair,9/12 watt LED light fitting heritage wall mounting fixture (sketch type) including B-22 LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cablefrom ceiling rose to connector of the light complete including removing unserviceable light fittingscomplete all as specified and as directed by the Engineer-in-Charge. Cat part No. HLWB-01-B22 of make Halonix or equivalent in make given in Appx \"B\".
187	Supply and fixing in repair, LED surface mounted bulk head luminaries, 8-10 watts, with min 800 lumen, industrial model, IP 65, aluminium housing, surge protection including driver and LED lamp, etc. complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed . Cat part No. HEXAFT10WLED857SSYMBOPC of make Havells or equivalent in make given in Appx \"B\".
188	Supply and fixing in repair,LED Bldg Security Light Fittings of capacity 35 watt made up of die castaluminiumhousing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver and making electrical connection, complete all as specified and as directed .Cat part No.ENDCITYLIT PLAT + SL35WLED757SASYBOPCWOSPD of make Havells or equivalentin make given in Appx \"B\".
189	M&L submain wiringwith 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked25mm dia as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2.5 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length.
190	M&L submain wiringwith 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked25mm dia as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2.5 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 6 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length.
191	M&L submain wiringwith 04 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 10 sqmm drawn through PVC conduit medium grade ISI marked32mm dia as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 6.0 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Four runs of 10 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length.
192	Supply and fixing MCB SPN 32 Amps, 240 volt,10 KA ,\"B\" curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.Cat part No 811035 of make Indoasian or equivalent make given in Appx \"B\".
193	Supply and fixing MCB SP, 6-32 Amps, 240 volt,10 KA ,\"B\" curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge. Cat part No 811008 to 811015 of make Indoasian or equivalent make given in Appx \"B\".
194	Supply and fixing sheet metal MCB DB SPN8 way with 200 Amps rated bus bar single pole and neutral withdouble door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. Cat part No.811826 of make Indo Asian or equivalent make given in Appx \"B\".
195	Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA \"B\" curve including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.Cat part No.811955 of make Indo Asian or equivalentin make given in Appx \"B\".
196	Supply and fix sheet metal enclosuretriple pole & neutral(TPN) IP-43 with MCB TPN 63 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and includinglugs/thimbles duly crimped for connectionincluding making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.
197	Supply and fix sheet metal enclosureVertical triple pole & neutral(VTPN) IP-54 with MCCB 100 Amp 4 pole, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and includinglugs/thimbles duly crimped for connectionincluding making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.
198	Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earthwire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test pointas directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/cboth ways with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testingas in repair complete all as directed by Engineer-in-Charge and earth testing on completion.
199	Supply and fixing of heavy duty exhaust fan 300mm sweep with corrosion resistant metal body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, PVC base framewith rubbermountings for silent operation, maximum watt input not more than 50 watt, 1400 RPM,minimum air delivery 750 cum/hr,metal bladestesting as in repair , complete all as specified and as directedby Engineer-in-Charge. SKU code - 70003of make Bajaj or equivalentin make given in Appx \"B\".
200	Supply & Fix Water heater (Geyser) storage verticletype with inner container of capacity 25 Ltrs of mild steel with glass lined coating, outer body made up of ABS corrosion / rust proof shock resistant, electricaaly operated, AC 230 volts BEE star rated (as per latest star label period), ISI marked, including fastner, PVC pipe 600 mm long for hot and cold water connectionfixed in brick / concrete wall, including writing the MES number with synthetic enamel paint complete all as specified and as directedby Engineer-in-Charge. The inner tank should have minimum 10 years warranty submitted by the tenderer from OEM. Model No Fabia 25 L of make Havells and crest 25 L of make Bajaj or equivalent make in Appx \"B\".Note :- Warranty certifcate to be produced by the Contractor from OEM for the following components before processing the bill.a) for Product - 04 Years b) for Heating element - 06 Years c) for metal tank- 10 Years
201	Supply & Fix MCB SPN, 32 Amp, 240 Volt, 10 kA, \"B\" curve complete all as specified and directed
202	Supply, laying,testing & commissioningXLPE insulated, armoured heavy duty electric cable 25 sqmmcross sectional area, 4 corewith stranded aluminium conductor, 1100 volts grade as in repair complete all as specified and as directed. Note: execavation & earth work shall be measured in B/R portion schedule \"A\" Part-I.
203	Supply and laying well burnt brick class–B laid flat to cover the cable with width equal to the length of cable and abutting each other for protection of cable complete all as specified and as directed.
204	Material and labour for dry sand cushoning to cable i.e 8 cm before laying cable in trenches and 15 cm after laying the cable and compacting complete all as specified and as directed Note: punned thickness shall be measured for payment.
205	Supply and fixing as in repairlight grade GI Tubing of size 40mm dia for cable protection and fixed with clamp to pole and wall with nut, bolts, washers complete all as specified and as directed.
206	Note:-Amount of credit ofRs.32,498.00 for retrieved materials is mentioned in Schedule of Credit Page No. 123 & 124 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Also Visit

Tenders

Haryana Tenders

Electrical Industry Tenders

Generators Tenders

Mobile Generator Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair , Additional / Alternator And Provision Of Certain Sanction Works Under Age B/R-Ii Of Ge (North) Ambala Cantt, Ambala-Haryana

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair , Additional / Alternator And Provision Of Certain Sanction Works Under Age B/R-Ii Of Ge (North) Ambala Cantt, Ambala-Haryana

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us