|
| 1 | Supply of 8.5 Mtr.long ,180Kg . PCC Poles | Supply of 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
| 2 | Supply of Stone Pad 300x300x75mm | Supply of Stone Pad (300x300x75mm) |
| 3 | Supply of AB XLPE Cable 3x50sqmm | Supply of Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16(insulated Street lighting) sqmm |
| 4 | Supply of LT XLPE cable 4x35 Sq mm | Supply of LT XLPE cable 4x35 Sq mm |
| 5 | Supply of LT XLPE cable 1x70 Sq mm | Supply of LT XLPE cable 1x70 Sq mm |
| 6 | Supply of 1x35 mm2 Un-armoured XLPE insulated Al. LT Cable | Supply of 1x35 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes. |
| 7 | Supply of ACSR Weasel Conductor | Supply of ACSR Weasel Conductor |
| 8 | Supply of ACSR Rabbit Conductor | Supply of ACSR Rabbit Conductor -Jumpering Works |
| 9 | Supply of Aluminium binding wire - 6 SWG | Supply of Aluminium binding wire - 6 SWG |
| 10 | Supply of 11KV Fuse Set Drop out | Supply of 11KV Fuse Set (Drop out) |
| 11 | Supply of 11KV TPMO | Supply of 11KV TPMO |
| 12 | Supply of 25 KVA 11KV-433V TF | Supply of 25 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type) |
| 13 | Supply of 63 KVA 11KV-433V TF | Supply of 63 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type) |
| 14 | Supply of LT Distribution box polyester sheet moulding compound SMC for 25 kVA | Supply of LT Distribution box polyester sheet moulding compound (SMC) for 25 kVA Distribution transformer with arrangement of suitable bus-bars and MCCBs as per scope of works of SBD |
| 15 | Supply of LT Distribution box polyester sheet moulding compound SMC for 63 kVA | Supply of LT Distribution box polyester sheet moulding compound (SMC) for 63 kVA Distribution transformer with arrangement of suitable bus-bars and MCCBs as per scope of works of SBD |
| 16 | Supply of 9 KV LA , 5 KA | Supply of 9 KV LA , 5 KA (Distribution Class) |
| 17 | Supply of Earthing Coil connected with Bentonite Powder | Supply of Earthing Coil connected with Bentonite Powder |
| 18 | Supply of GI Flat 25X3 for Earthing | Supply of GI Flat 25X3 for Earthing |
| 19 | Supply of Earthing Arrangement of chemical pipe size of 80mm , 3000 mm.long | Supply of Earthing Arrangement of chemical pipe size of 80mm , 3000 mm.long |
| 20 | Supply of G.I. Barbed Wire | Supply of G.I. Barbed Wire |
| 21 | Supply of G.I. Wire No. 16 SWG for binding | Supply of G.I. Wire No. 16 SWG for binding |
| 22 | Supply of G.I. Wire 6 SWG for Protective Guarding | Supply of G.I. Wire 6 SWG for Protective Guarding |
| 23 | Supply of G.I. Wire 8 SWG for protective Guarding and Earthings | Supply of G.I. Wire 8 SWG for protective Guarding and Earthings |
| 24 | Supply of 11 KV Disc Fitting T and C type | Supply of 11 KV Disc Fitting T and C type |
| 25 | Supply of 11 KV Polymer Disc Insulators 45 KN TandC Type | Supply of 11 KV Polymer Disc Insulators 45 KN TandC Type |
| 26 | Supply of 11 KV Pin Insulator Polymer Type as per TS | Supply of 11 KV Pin Insulator Polymer Type as per TS |
| 27 | Supply of Dead End clamp Insulated | Supply of Dead End clamp (Insulated) |
| 28 | Supply of End Cap for AB cable | Supply of End Cap for AB cable |
| 29 | Supply of Suspension clamps Insulated | Supply of Suspension clamps (Insulated) |
| 30 | Supply of Pole Clamps with with I-Hook for laying ABC | Supply of Pole Clamps with with I-Hook for laying ABC |
| 31 | Supply of Insulating Piercing Connector 16-95 sq.mm | Supply of Insulating Piercing Connector (16-95 sq.mm) |
| 32 | Supply of Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound SMC | Supply of Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut and bolts |
| 33 | Supply of PG Clamps 16 Sq mm .- 50 sq mm | Supply of PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire and energizing DB Neutral) |
| 34 | Supply of PG Clamp for Rabbit | Supply of PG Clamp for Rabbit |
| 35 | Supply of GI Stay Wire 7-10 SWG | Supply of GI Stay Wire 7/10 SWG |
| 36 | Supply of HT Guy Insulator | Supply of HT Guy Insulator |
| 37 | Supply of LT Guy Insulator | Supply of LT Guy Insulator |
| 38 | Supply of Stay Complete | Supply of Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt and Washers Ref- Drg - REC/RDSS/GEN/09 |
| 39 | Supply of HT Stay Clamp | Supply of HT Stay Clamp as per approved drawing-11 KV |
| 40 | Supply of LT Stay Clamp | Supply of LT Stay Clamp as per approved drawing |
| 41 | Supply of Pre-fabricated galvanised steel items zinc 610gms-sqm | Supply of Pre-fabricated galvanised steel items (zinc 610gms/sqm), like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings,Tea off, guarding channels, back clamp, DTs Structure etc made of GS Channels , GS angle , GS flats (50x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work. |
| 42 | Supply of GS Nuts, bolts | Supply of GS Nuts, bolts and washers as per technical specification, approved drawings and scope of work. |
| 43 | Supply of Eye Bolt for Guarding | Supply of Eye Bolt for Guarding |
| 44 | Supply of Jointing sleave -ACSR Weasel | Supply of Jointing sleave -ACSR Weasel |
| 45 | Supply of 11 KV Danger Board | Supply of 11 KV Danger Board |
| 46 | Supply of 11 KV Number Plate | Supply of 11 KV Number Plate |
| 47 | Supply of Armoured Service Cable 2CX6 SQMM | Supply of Armoured Service Cable 2CX6 SQMM |
| 48 | Erection of HT Line-Route survey and pole spotting for 11 KV line | Erection of HT Line-Route survey and pole spotting for 11 KV line |
| 49 | Erection of HT Line-8.5 Mtr.long ,180Kg . PCC Poles | Erection of HT Line-8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
| 50 | Erection of HT Line-ACSR Weasel Conductor | Erection of HT Line-ACSR Weasel Conductor |
| 51 | Erection of HT Line-Stone Pad 300x300x75mm | Erection of HT Line-Stone Pad (300x300x75mm) |
| 52 | Erection of HT Line-Pre-fabricated galvanised steel items zinc 610gms-sqm | Erection of HT Line-Pre-fabricated galvanised steel items (zinc 610gms/sqm), like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings,Tea off, guarding channels, back clamp, DTs Structure etc made of GS Channels , GS angle , GS flats (50x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work. |
| 53 | Erection of HT Line-GS Nuts, bolts and washers | Erection of HT Line-GS Nuts, bolts and washers as per technical specification, approved drawings and scope of work. |
| 54 | Erection of HT Line-G.I. Wire 6 SWG for Protective Guarding | Erection of HT Line-G.I. Wire 6 SWG for Protective Guarding |
| 55 | Erection of HT Line-G.I. Wire 8 SWG for protective Guarding and Earthings | Erection of HT Line-G.I. Wire 8 SWG for protective Guarding and Earthings |
| 56 | Erection of HT Line-Eye Bolt | Erection of HT Line-Eye Bolt |
| 57 | Erection of HT Line-G.I. Wire No. 16 SWG for binding | Erection of HT Line-G.I. Wire No. 16 SWG for binding |
| 58 | Erection of HT Line-Earthing Arrangement of chemical pipe size of 80mm | Erection of HT Line-Earthing Arrangement of chemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
| 59 | Erection of HT Line-11 KV Pin Insulator Polymer Type as per TS | Erection of HT Line-11 KV Pin Insulator Polymer Type as per TS |
| 60 | Erection of HT Line-11 KV Polymer Disc Insulators 45 KN TandC Type | Erection of HT Line-11 KV Polymer Disc Insulators 45 KN TandC Type |
| 61 | Erection of HT Line-11 KV Disc Fitting T and C type | Erection of HT Line-11 KV Disc Fitting T and C type |
| 62 | Erection of HT Line-PG Clamp for Rabbit | Erection of HT Line-PG Clamp for Rabbit |
| 63 | Erection of HT Line-Aluminium binding wire - 6 SWG | Erection of HT Line-Aluminium binding wire - 6 SWG |
| 64 | Erection of HT Line-Jointing sleave -ACSR Weasel | Erection of HT Line-Jointing sleave -ACSR Weasel |
| 65 | Erection of HT Line-11 KV Danger Board | Erection of HT Line-11 KV Danger Board |
| 66 | Erection of HT Line-G.I. Barbed Wire | Erection of HT Line-G.I. Barbed Wire |
| 67 | Erection of HT Line-Earthing Coil connected with nutbolt using Bentonite Powder | Erection of HT Line-Earthing Coil connected with nutbolt using Bentonite Powder |
| 68 | Erection of HT Line-Stay Complete | Erection of HT Line-Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt and Washers Ref- Drg - REC/RDSS/GEN/09 |
| 69 | Erection of HT Line-HT Guy Insulator | Erection of HT Line-HT Guy Insulator |
| 70 | Erection of HT Line-GI Stay Wire 7-10 SWG | Erection of HT Line-GI Stay Wire 7/10 SWG |
| 71 | Erection of HT Line-HT Stay Clamp as per approved drawing-11 KV | Erection of HT Line-HT Stay Clamp as per approved drawing-11 KV |
| 72 | Erection of HT Line-11 KV Number Plate | Erection of HT Line-11 KV Number Plate |
| 73 | Erection of HT Line-Concreting Works of Poles | Erection of HT Line-Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1x2x4)-0.268 Cmt (8.5 Meter - PCC pole) as per approved Drawing |
| 74 | Erection of DTR-25 KVA , 11-0.433 KV T-F Level-1 Self Protected Aluminium Wound Type | Erection of DTR-25 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type) |
| 75 | Erection of DTR-63 KVA , 11-0.433 KV T-F Level-1 Self Protected Aluminium Wound Type | Erection of DTR-63 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type) |
| 76 | Erection of DTR-8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification | Erection of DTR-8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
| 77 | Erection of DTR-Stone Pad 300x300x75mm | Erection of DTR-Stone Pad (300x300x75mm) |
| 78 | Erection of DTR-Pre-fabricated galvanised steel items zinc 610gms-sqm | Erection of DTR-Pre-fabricated galvanised steel items (zinc 610gms/sqm), like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings,Tea off, guarding channels, back clamp, DTs Structure etc made of GS Channels , GS angle , GS flats (50x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work. |
| 79 | Erection of DTR-GS Nuts, bolts and washers | Erection of DTR-GS Nuts, bolts and washers as per technical specification, approved drawings and scope of work. |
| 80 | Erection of DTR-11 KV Polymer Disc Insulators 45 KN TandC Type | Erection of DTR-11 KV Polymer Disc Insulators 45 KN TandC Type |
| 81 | Erection of DTR-11 KV Disc Fitting T and C type | Erection of DTR-11 KV Disc Fitting T and C type |
| 82 | Erection of DTR-11 KV Pin Insulator Polymer Type as per TS | Erection of DTR-11 KV Pin Insulator Polymer Type as per TS |
| 83 | Erection of DTR-11KV TPMO | Erection of DTR-11KV TPMO |
| 84 | Erection of DTR-11KV Fuse Set Drop out | Erection of DTR-11KV Fuse Set (Drop out) |
| 85 | Erection of DTR-9 KV LA , 5 KA Distribution Class | Erection of DTR-9 KV LA , 5 KA (Distribution Class) |
| 86 | Erection of DTR-LT Distribution box polyester sheet moulding compound SMC for 25 kVA | Erection of DTR-LT Distribution box polyester sheet moulding compound (SMC) for 25 kVA Distribution transformer with arrangement of suitable bus-bars and MCCBs as per scope of works of SBD |
| 87 | Erection of DTR-LT Distribution box polyester sheet moulding compound SMC for 63 kVA | Erection of DTR-LT Distribution box polyester sheet moulding compound (SMC) for 63 kVA Distribution transformer with arrangement of suitable bus-bars and MCCBs as per scope of works of SBD |
| 88 | Erection of DTR-LT XLPE cable 4x35 Sq mm | Erection of DTR-LT XLPE cable 4x35 Sq mm |
| 89 | Erection of DTR-LT XLPE cable 1x70 Sq mm | Erection of DTR-LT XLPE cable 1x70 Sq mm |
| 90 | Erection of DTR-G.I. Barbed Wire | Erection of DTR-G.I. Barbed Wire |
| 91 | Erection of DTR-ACSR Rabbit Conductor -Jumpering Works | Erection of DTR-ACSR Rabbit Conductor -Jumpering Works |
| 92 | Erection of DTR-Stay Complete | Erection of DTR-Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt and Washers Ref- Drg - REC/RDSS/GEN/09 |
| 93 | Erection of DTR-HT Guy Insulator | Erection of DTR-HT Guy Insulator |
| 94 | Erection of DTR-GI Stay Wire 7-10 SWG | Erection of DTR-GI Stay Wire 7/10 SWG |
| 95 | Erection of DTR-HT Stay Clamp | Erection of DTR-HT Stay Clamp as per approved drawing-11 KV |
| 96 | Erection of DTR-Earthing Arrangement of chemical pipe size of 80mm | Erection of DTR-Earthing Arrangement of chemical pipe size of 80mm , 3000 mm.long and 8 SWG earthing wire etc. |
| 97 | Erection of DTR-GI Flat 25X3 for Earthing | Erection of DTR-GI Flat 25X3 for Earthing |
| 98 | Erection of DTR-Concreting Works of Poles | Erection of DTR-Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1x2x4)-0.268 Cmt (8.5 Meter - PCC pole) as per approved Drawing |
| 99 | Erection of LT Line-8.5 Mtr.long ,180Kg . PCC Poles | Erection of LT Line-8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
| 100 | Erection of LT Line-Stone Pad 300x300x75mm | Erection of LT Line-Stone Pad (300x300x75mm) |
| 101 | Erection of LT Line-AB XLPE Cable 3X50 sqmm | Erection of LT Line-Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm |
| 102 | Erection of LT Line-Pole Clamps with I-Hook for laying ABC | Erection of LT Line-Pole Clamps with with I-Hook for laying ABC |
| 103 | Erection of LT Line-Dead End clamp Insulated | Erection of LT Line-Dead End clamp (Insulated) |
| 104 | Erection of LT Line-Suspension clamps Insulated | Erection of LT Line-Suspension clamps (Insulated) |
| 105 | Erection of LT Line-End Cap for AB cable | Erection of LT Line-End Cap for AB cable |
| 106 | Erection of LT Line-PG Clamps 16 Sq mm .- 50 sq mm | Erection of LT Line-PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire and energizing DB Neutral) |
| 107 | Erection of LT Line-Insulating Piercing Connector 16-95 sq.mm | Erection of LT Line-Insulating Piercing Connector (16-95 sq.mm) |
| 108 | Erection of LT Line-1x35 mm2 Un-armoured XLPE insulated Al. | Erection of LT Line-1x35 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes. |
| 109 | Erection of LT Line-Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound SMC | Erection of LT Line-Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut and bolts |
| 110 | Erection of LT Line-Earthing Coil connected with nutbolt using Bentonite Powder | Erection of LT Line-Earthing Coil connected with nutbolt using Bentonite Powder |
| 111 | Erection of LT Line-Stay Complete | Erection of LT Line-Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt and Washers Ref- Drg - REC/RDSS/GEN/09 |
| 112 | Erection of LT Line-LT Guy Insulator | Erection of LT Line-LT Guy Insulator |
| 113 | Erection of LT Line-GI Stay Wire 7-10 SWG | Erection of LT Line-GI Stay Wire 7/10 SWG |
| 114 | Erection of LT Line-LT Stay Clamp | Erection of LT Line-LT Stay Clamp as per approved drawing |
| 115 | Erection of LT Line-Concreting Works of | Erection of LT Line-Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1x2x4)-0.268 Cmt (8.5 Meter - PCC pole) as per approved Drawing |
| 116 | Erection of Armoured Service Cable-Installation of Armoured Service Cable Connections | Erection of Armoured Service Cable-Installation of Armoured Service Cable 2CX6 SQMM for Connections with all accessories |
